Liczymy pasujące modele…
When I watched the chikawa, I thought the characters were cute. Chiikawa (ちいかわ) is cute. Here is some information about chiikawa to help you understand chiikawa. Chiikawa (ちいかわ), also known as Nanka Chiisakute Kawaii Yatsu (なんか小さくてかわいいやつ,…
The original model by fluf was good but 2mm too tall and often fell off, so I shortened it and also made a few personal tweaks. Chamfered edges, higher model resolution (the original suffered from being pretty low poly), and easier to…
Bracket for keeping Schiit devices stacked. Designed to be used without the schiit modi/magni antislip feet. The split bracket parts fit together very loosely, recommend gluing them together.
A simple model that I ended up putting a bit of extra work into. I’ve made four versions: one without details (perfect for painting) and one with engraved facial and other details. Each of these comes in two variants — with and without a…
Print of Usagi from Chiikawa, built for a very large print due to the abundance of small facial features. Features may be a tight fit that require hammering or sanding.795
The best way to remove the residue from the PET bottle, is by heating up the outer label with a hairdryer (not too much to melt the bottle though), the label will remove easily. To clear the residue, take any produce containing D-limonene…
Have you ever had to readjust your Schiit? Ever had your Schiit Dragged across your desk? Had to realign your stack of Schiit? If you're like me the rubber on the bottom of your Schiits always gets dusty and looses its firm grip. I got…
This is a pair of mounts/brackets for the Schiit Modi and Schiit Magni, version 3. I liked other models, but wanted to be able to snap in the Modi/Magni on the fly since I do move them between desks sometimes. The models both fit either…
I have a rather large collection of the smaller Schiit audio devices. I have two that I need to touch fairly regularly. The under desk holder worked great, but I wanted to put them a little closer together. I recommend print settings that…
Should work with any Shiit small chassis hardware. I'm using it with the Magni Heretic. It utilizes the rubber feet to secure it from sliding as there are pockets to accept them. Four screws up to #10 (I used #8) are used to secure it.…
I used the pegs in the squares cut out to assemble the piece and super glue, I made it with PLA but whatever works for you :p
This enclosure is made specifically for the Raspberry Pi, tailored to match the aesthetic and dimensions of Schiit audio equipment. With clean lines and a minimalist form factor, it blends seamlessly into any SchiitStack, allowing you to…
Spacers I made to lift my Lyr+ (also worked on Asgard 2) over my Bifrost. The cases are all about 6x9 so these should work for a variety of their normal sized stuff (not modi\magni\etc). If you align notches it will hold the stack…
got an MSLA printer, wanted to make tiny neps. that's about it. Print instructions needs support touching build plate
The Modi Plus can't be mounted the same way as the original Modi, so I based the hole placement for installing the screws based off the old mount I had (what this is a remix of). Then to actually secure the Modi, it acts as a cradle and…
Hello. This is my first time doing a remix/design. I was looking to hold my Schiit Modi+ and Magni+ together, and I found Delita's Schiit Stack Holders . They are awesome! They hold them well and are very snug! Though, they don't allow…
has a 15.5mmx16.5mmx2.2mm cutout to accommodate for feet. The 16.5mm is front/back to make space for the front panel of the enclosure. I used paint on supports, and then chose “automatic painting” printed in PLA with a 25% infill, on 20mm…
This will mount a Schiit Audio Hel Dac underneath a desk with four screws. the dac can be remove even after attaching through the front. The optional headphone hanger slides on the front but really should be much lower.
Great for architectural visualization or as reference. The ‘aluminum shell’ part can also be printed separately as a replacement for a damaged unit. Material PETG or PC-ABS recommended
I wanted to clean up my desk from all the clutter and one thing that had to go was the Schiit Audio Fulla 2 heaphone DAC/amp combo, but I still need it if I want to enjoy music or any sound at all for that matter. So why not mount it…
Remixed from https://www.thingiverse.com/thing:3779425 . Added a backing and decided to cut out the Schiit logo. You could slide a piece of paper inside to make the logo white, but I personally like the red/grey vibes. (Also added a non…
Mesh files are compatible with Schiit 6x9in devices using the old-style U-shaped chassis (e.g. Bifrost 1, Lyr 2) and Noctua NF-A14 fans (and probably any 140mm PC fan). Use one left part and one right part; both the fan brackets and the…
Description/Background: This is an insert for the Schiit Asgard 3 headphone amplifier that securely holds two panel mount RCA jacks. The Asgard 3 can be purchased with a DAC input card that connects to an internal header on the mainboard,…
UPDATE 11-2025 - Refined the design after breaking free from TinkerCad and started learning Fusion. I made this to mount to my wall by my bed to hold my Schiit Vali headphone amp that I pair with some HD6XX headphones for nightime…
An under desk holder that has room for 3 Schiit components, and the spacers I have also remixed to accommodate feet. I have a regular one, and 2 with circular cutouts for Ikea-style mounts (pictured). Will work with LINMON and VIKA AMON…
This rack was designed to clear off my desk. Full freecad sources are included. This rack can be mounted to the underside of your desk with 4x #6 screws of your preferred length. Otherwise no additional hardware is needed. Parts should be…
It has 2 parts that screw together, and can print on a prusa mini. Use support. There is a paid extrusion version on my etsy repugnant records.com Category: Music
A hastily-made remix of https://www.printables.com/model/617521-schiit-modi-plus-under-desk-mount with added triangles to remove the needless overhangs and making printing without supports feasible. This is not well-made, but I'm deep…
Worked with a friend to create custom feet for his Schiit Sol turntable. They are height adjustable, and vibration dampening. The original feet fit inside of the mod, so if you ever want to remove them or resell the turntable, you won't…
After getting my Schiit Fulla amp, I noticed that it was less than stable because of being on three rubber feet. I created this model so it would sit more stably on my desk. It was more an exercise to aid in learning Fusion 360 but it's…
Keep your Schiit Audio Mjolnir 3 cool when you have a mere 3.75" of vertical space. Note that this shroud is designed to allow you to use the XLR and RCA inputs, but not the outputs. Hence you will be able to use your Mjolnir 3 as a…
Feel free to emboss with prusaslicer 2.6 :)
holds a Schiit Modi, Loki, and Magni, with 20mm of space above to allow passive cooling. Printed in PLA using organic supports
I much prefer the knobs on full-sized Schiit products like Jotunheim and Asgard to the Magni/Piety/Loki/Vali line, and I wanted to replace the knobs on my smaller Schiit products. I designed a printable sleeve to slip over the existing…
This is a case that I designed because I just wanted to protect from dust and from eventual hit ( kids and pets are going everywhere ). It protects the valve area from dust as there are many holes for ventilation. Do not use during normal…
I follow the Youtube to crochet the body and 3D modelled and Printed with Bamboo A1 combo This can be used to other characters as well. I used TinkerCad to design and If you want to learn How to Design this pls check the link below
A hastily-made remix of https://www.printables.com/model/617521-schiit-modi-plus-under-desk-mount with added triangles to remove the needless overhangs and making printing without supports feasible. This is not well-made, but I'm deep…
You'll need an electronics kit: A search on "500UA VU Meter Warm Back Light Recording & Audio +Cable with Driver Module". Should find you one of several hundred that will work. The meters themselves are 35x35x37mm to help you narrow it…
UPDATE 11-2025 - Refined the design after breaking free from TinkerCad and started learning Fusion. I made this to mount to my wall by my bed to hold my Schiit Vali headphone amp that I pair with some HD6XX headphones for nightime…
This is a pair of mounts/brackets for the Schiit Modi and Schiit Magni, version 3. I liked other models, but wanted to be able to snap in the Modi/Magni on the fly since I do move them between desks sometimes. The models both fit either…
Should work with any Shiit small chassis hardware. I'm using it with the Magni Heretic. It utilizes the rubber feet to secure it from sliding as there are pockets to accept them. Four screws up to #10 (I used #8) are used to secure it.…
This is a modified mount designed for the Schiit Fulla E DAC/AMP, optimized for under-desk installation. Unlike screw-mounted options, this version attaches securely to your desk using 3M Command Strips or double-sided tape, preserving…
Created a simple mount for my Schiit Stack. Mounting holes slotted for adjustment and sized for #6 screws.
uses usb c connection to retain to mount, clever or stupid who knows. Bolt holes accept M5 or M6 shoulder head screws. Print with tree supports. enjoy!
I've always been a fan of G-shock ( and tamagotchi). Fun and bulky. Even if they're not expensive in the watchmaking world, it's still a budget when you want to buy all the g-shocks. So an idea came to mind: why not create a watch…
This protects the plastic knob on a Schiit Fulla 2 DAC. Dropping this DAC can result in the knob and potentiometer becoming apart from the board. This part is designed to protect the knob while not using a lot of filament. Simply align…
I much prefer the knobs on Schiit products like Jotunheim and Asgard to the Magnius/Lokius line, and I wanted to replace the knobs on my Magnius products. I designed a printable sleeve to slip over the existing knobs. There are two…
Just a simple and easy Mount for Shiit's Fulla. Used pmurphy's smart idea for clipping the mount toolless on the DAC Print Settings Printer: AM8 Rafts: No Supports: Doesn't Matter Resolution: .2 Infill: 10% Category: Other
Keychains of the characters from the show Chiikawa, I recommend painting them for a more custom look.
You'll need an electronics kit: A search on "500UA VU Meter Warm Back Light Recording & Audio +Cable with Driver Module". Should find you one of several hundred that will work. The meters themselves are 35x35x37mm to help you narrow it…
Protective cage for the Schiit Vali 3's single tube. Wont help much on major hits but should help keep fingers and cats off. UPDATE: works for the BUF as well just turn the legs around. Use ASA or even a higher temp plastic. PETG is right…
Protective cage for the Schiit Vali 3's single tube. Wont help much on major hits but should help keep fingers and cats off. UPDATE: works for the BUF as well just turn the legs around. Use ASA or even a higher temp plastic. PETG is right…
This is a two piece case I designed for the Schiit Vestri dongle. It's comprised of two separate pieces, a TPU liner, and a PLA shell. It also uses a mag-safe magnet and steel ring purchased from Amazon(see links). The shell can be…
Was retroactively editing the model but as of now everything should work, redownload the STLs if you want the latest variant. V1 utilizes a three-wall design but V2 has holes that line up with the liner from the original creator. Do lmk…
Just a little TPU spacer to let your medium Schiit Stack breath a little. Print one per side. Have the little index legs point whatever direction seems best. Very handy to give some air to a Lokius or a Valhalla (although its not big…
Features This is a stand for mini figures of Chiikawa series. It attaches to the Z-axis-top part of the Prusa i3 MK3S+, and the figure is attached to it with double-sided tape. What is "Chiikawa" ? → Please watch the video in YouTube .…
A stack for the mini-sized Schiit components. This does not require any new screws and uses the rubber feet to hold components in place. I've provided files for a 2, 3, & 4-tall stack. How does it attach? This model uses the rubber feet…
The tiny rubber feet that came on my Schiit Valhalla 2 headphone amplifier peeled off. I tried to reattach them with some rubber cement but they peeled off again. Got sick of this so made better feet with more surface area for better…
Fairly simple remote stand that doesn't need any supports. I currently only have one version of the stand/holder with variations for different remote combos, I may make a shorter version or a 3 remote version in the future, so feel free…
When I watched the chikawa, I thought the characters were cute. Hachiware is cute. Here is some information about chiikawa to help you understand chiikawa. Chiikawa (ちいかわ), also known as Nanka Chiisakute Kawaii Yatsu (なんか小さくてかわいいやつ,…
Origionally designed for the deej volume mixer project on github. https://github.com/omriharel/deej?tab=readme-ov-file#build-your-own This box is in the style of the Schiit Vali 2. The freecad sources are included as well as stls to…
Under desk mount for Schiit Fulla E DAC/AMP, optional mounting holes for screws (mounted mine using double sided gorilla tape)
The holder for the Schiit Stack from Schiit Audio is a simple design to move the stack from above a desk to below a desk. Nothing special for layer height or material used. Command strips can be used to attach the stack to the bottom of…
Mount a Schiit Fulla 4/E DAC/AMP by screwing it into a surface. I mount mine to my digital piano connected to a RPi M400 running Pianoteq mounted behind the piano. Allowed me to upgrade the sound on my old Casio PX 200 digital piano. I…
