Liczymy pasujące modele…
Snapmaker 2.0 touchpad holder T-rail mount for original enclosure (A150/A250/A350) Allows you to place the control touchpad on the enclosure and move as needed. You will need: Original magnetic touchpad mount (remains unused after…
Wydruk około 0,99 €–1,22 € nettoWstępna wycena jednego wariantu
Messbecher mit Skala für Dosierempfehlung. Linke Skala für Halbe Maschine (ca. 4,5kg): Leichte Verschmutzung ca. 80ml Mittlere Verschmutzung ca. 100ml Starke Verschmutzung ca. 140ml Rechte Skala für Volle Maschine (ca. 9kg): Leichte…
Wydruk około 3,47 €–4,24 € nettoWstępna wycena jednego wariantu
1:11 Benchpress with weights, bar and bench
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
ein Ersatz für deine French Press damit du weiter guten Kaffee genießen kannst.
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
Motivation I derived this model for SKADIS pegboards from another hook project: Print The material recommended is PETG, as during usage the brackets have to support the weight of the object hooked onto it. Printed with SUNLU PETG (Black).…
Wydruk około 1,26 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Instead of using the provided bracket to hold the Benchpilot EStop, install it on the side of table, against the aluminium profile. BOM 6 M5 nuts 4 25mm M5 Button Head Socket Cap Screws Bolts (20 mm should be fine as well) 2 15mm M5…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Das Model kann an die jeweilige Tischplatte durch skalieren angepasst werden. Der .gcode ist hier an eine 350mm dicke Platte angepasst. Gedruckt: mit Support nur 2-3 Wänden für optimale Federung PETG
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A 10-port keystone patch-panel made to fit in 10-inch racks. Mix and match your keystone modules in your mini lab with this model! Updates 09 Dec. 2025: Added a reinforced version of this model. (Version 1.1) This model is part of a…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 3-Way Elbow designed to…
Link to the platholder and plates: https://www.printables.com/model/1003638-mini-gym-barbell-weight-set-my-pr
A 8-port, 1/2U, keystone patch-panel made to fit in 10-inch racks. Mix and match your keystone modules in your mini lab with this model! This model is part of a series of 10-inch rack mounts I've designed. You can check out the others…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are 4-Way and 5-Way Tees…
A modular, two-part 16 ports keystone patch-panel made to fit in 19-inch racks. Each module has 8 keystone jacks. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts.…
A modular, two-part 16 ports keystone patch-panel made to fit in 19-inch racks. Each module has 8 keystone jacks. This is the beefier version of the regular 19-inch modular keystone patch panel , for those who need the extra strength. I…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 4-Way Elbow designed to…
Glitchpop Vandal from Valorant, send your makes :D ! ''VALORANT RECON MELEE'' was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. Print Settings…
As always I will promote and REWARD the first people to post quality makes (must enable tips on your profile for reward). A quality make is a successful, complete, hopefully decent looking print at 50% scale or larger. This doesn't…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are 5-way and 6-way crosses…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are reconfigurable 22.5 & 45…
A 16-port keystone patch-panel made to fit in 10-inch racks. Mix and match your keystone modules in your mini lab with this model! This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . Do…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . A friend requested fittings to…
Remix of Peter Sassaman's design. Filled in outer space to match other gridfinity tool holders and added more clearance to the hole the side cutters fit in. Link to Item: https://hakkousa.com/chp-170-micro-cutter.html
A 5 port 6-inch keystone patchpanel for your tiny lab! This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print Settings Rafts:…
Holder for CHP-170 to go in Gridfinity sorting system. Credit to Zach Freedman for the Gridfinity System:
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 3-Way Elbow that you…
Holds CHP wire strippers on a standard 1 inch pegboard grid. Printing Instructions Print in downloaded orientation. Use supports from bed to support pegs.
This is a webcam mount, to use a Logitech C270 on an Ender 3 S1. If you are using a Sonic Pad, and have removed (or want to) the original control pad, this will make great use of the screw holes. Since it is hard mounted on the corner of…
This is the Glitchpop frenzy pulled from the Valorant game files and optimized so they are actually printable, Enjoy. -WARNING: NONE OF THE FILES ARE SCALED CORRECTLYcure it. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts:…
Bitte nehmt an einer Abstimmung teil, damit ich abschätzen kann, wieviel Aufwand ich in meine Beschreibungen einbringen sollte.: https://www.pww2.com/abstimmung Ich habe die PV Anlage von der Firma Kleines Kraftwerk gekauft. Das sind 4…
I took the original lid and added an open cone shape on top. For some reason unknown to me, I needed to slice at 101% for good fit, 100% was too tight.
Eine Dosierhilfe bzw. Dosierbecher für Waschpulver mit schrägem Griff und Ausleermulde. A dosing aid or dosing cup for washing powder with an angled handle and emptying tray.
A box with lid for typical European washing powder bags, which usually comes with a content of about 2kg. Pretty easy to pint. I don't think I need to give any advice on how to print.
This tray is designed for SwitchPro Controller. Print with supports
Version: 1 Latch designs used from https://www.printables.com/model/804797-framework-laptop-16-trackpad-spacer
10 ports keystone patch-panel made to fit in 10-inch racks.
Remixed from /thing:2085782 . I just added Cowboys designs. I've uploaded versions with & without hooks, as well as a simple blank one if you would like to make your own.
I printed one Version but it was for my cases not strong enough so get inspired by this model and designed a new one. not shure how many ml are in the cup but it is suffciant for my case. @Mardor: Thanks for sharing. Print Settings…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … The inner diameter is 9.7mm because I noticed that nearly…
This is a delete bracket, to hide the holes left over by removing the original touch/control pad mount on the Ender 3 S1/S1 Pro. If you are using the Sonic Pad, and your control pad is taking up valuable real estate, do what I did and…
I bought a direct drive off of amazon. It needed a drag chain. I designed one. It attaches to the hotend carriage and the old extruder mount on the side. I have found it works pretty well! For this you are going to need: -4 m3x12 screws…
Customize a simple gutter for your shed with bitumen roofing. Choose from 10cm, 20cm and 25cm long gutter rails to fit your roof length. End-caps and drain-caps for both mounting orientations are provided The bitumen felt self-glues to…
Have a Yeti Hopper cooler with their 1” strap and loop Hitchpoint Grid and wish you could make it more versatile? Something extra for tailgates, road trips, or a day at the beach? Here’s a start. These designs were made for “hard” TPU,…
Is it a Benchy? Is it a Plane? It is both! A funny mix of a benchy and a simple airplane. I thought this would be a cool idea. I have printed it with customized supports under the wings and turbines. For me it worked fine with cool…
I was tired of using the standard controller for playing pinball on the Nintendo Switch, so I built this, the SwitchPin! No modifications or soldering needed, just drop in the Joy-Cons and play! I printed these in Hatchbox PLA on my Prusa…
Goldwaschpfanne Maße : 240x67mm
Ich fand die originalen item Tischplattenbefestigung 0.0.617.63, für die 8 Nut, einfach zu teuer, für das was diese Befestigung bei mir leisten muss. Diese Befestigung ist für 40x40 / 40x80 ..... gedacht. Ich hoffe ihr könnt was damit…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Bei klappbaren Stehtischen gehen die Adapter wo die Tischbeine eingerastet sind schnell kaputt. Dafür ist der Adapter.
Dieser Halter für ein Headset kann einfach auf eine Tischplatte aufgesteckt werden. Optimiert ist er für die Plattenstärke von 21 mm. Kein Kleben, kein Bohren, einfach auftecken. Gedruckt mit PLA. This holder for a headset can be easily…
This is a set of 55mm compatible blindplates, switchplates and various mounts to integrate in your existing switchplates. The frontplates all clip into a springed backplate that is also printed (InsertSpring). The backplate itself is…
Dachziegel für den Hobbybereich Category: DIY
A simple switch panel to control the power of the printer, LEDs and a raspberry pi. It was designed to be mounted on the right hand side of the prusa lack enclosure (can be mirrored in the slicer to fit on the left side aswell). Maybe…
Here's a Gridfinity-compatible bin for Hakko CHP-170 Micro Cutter. It's 4 x 2 x 2 Gridfinity units. Features: custom fit. Fits the CHP170 perfectly but no other cutters. snug – the cutter's spring holds it in place cutouts for your…
If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for 12 Port Keystone Patchpanel This bracket is designed specifically as a 12-port Keystone patchpanel, offering a clean and secure fit in your 10-inch…
Mountingplate for this 1/10 winch: https://a.aliexpress.com/_ugmYhm The winch boltpattern didn' t line up with the stock bumper. On the front you have space to drill two 2,5mm holes. But in the back i didn't like that there is no proper…
Eine Pyramide zum Teile ablegen beim Streichen damit nichts mehr auf die Unterlage kommt und man überall gut hinkommt!Auf die Oberseite habe ich jeweils einen kleinen Klecks Silikon gemacht dann verrutschen leichte Werkstücke nicht so…
I couldn't find any 3D printed launchpads I liked so designed my own. I likely will need to make some amendments but if you make this let me know any feedback and I can get onto it. You will need a metal disk and metal rod to complete it.…
This is 3D printable one piece solution to the three piece Framework 16 Touchpad and spacer solution. Fits on the Original Prusa XL. The best orientation to print this is with the flat side (where the palms would rest) on the bottom…
I created a replacement for my old omnitronic dual cd-player. Maybe it fits to some mixers too, if not the step-file can help to adjust it.
I really like this catchphrase, and I told myself "Hey, it splits pretty well into sub-parts, so why not include it on lock laces ?!". Since I don't walk around often with my printer in the street, this way I can wink at other PRUSA users…
Inspired by the GRAS 45CC Compared to my old KB501X plate the DCHPF enables proper fitment of the headphone and the ability to measure left and right channel more seamlessly. Significantly more rigid structure, fully secured coupler and…
Edit 3/26/2021 Added a v2 plunger. Made it a little bit taller to it doesn't rattle as much and modified the geometry of the stem. Left both versions so you can print out both and decide for yourself which one fits your needs. If printing…
The whole project is based on and of course compatible to the “sprinkler rocket” by Sevro from Makerworld: https://makerworld.com/en/models/1370364-sprinkler-rocket The rocket shown in the picture is the slim-rocket from there. I wanted…
This model i made is just a small benchpress. It can be assembled with bolts and glue and is a fun gift to give to someone who likes going to the gym. A wooden stick is used as bar.
Protective case for Tiva C Launchpad. 4x M3*12 Allen screws
Deutsch: Das Modell ist eine Lochplatte inklusive Stifte, um Werkzeug an der Wand aufzuhängen. Die Stifte können überall reingesteckt werden, wodurch eine extrem hohe Modularität und individuelle Anpassungsmöglichkeit besteht. Die Löcher…
Depending on the precision of your 3D printer, you may want to select a different version. For me, version 24 was the best fit. Cap1: 8.05 x 2.20 mm Cap2: 8.10 x 2.20 mm Cap3: 8.15 x 2.20 mm Cap4: 8.20 x 2.20 mm Cap5: 8.25 x 2.20 mm Cap6:…
Weil ich schon zwei Arten von Tischplattenbefestigungen erstellt habe, habe ich mir noch eine Weitere erstellt in zwei Versionen. Diese Befestigung ist für das 40x40 Profil und abgesetzt. Damit kann / sollte eine 16mm Platte fast bündig…
I am modding my Nerf Rayven to take a LiPo battery and I didn't want to just fit something in with hot glue. The switch I am using an Omron 16A microswitch with a plunger activation. I based the switch in fusion 360 off of…
Eine Farbmischpalette (20 x 10 cm) zum mischen von Farben. Praktisch, wenn man seine gedruckten Modelle mit Acrylfarbe bemalt. Support wird nicht benötigt. Material ist auch egal. Füllung 30-40 %.
It has 8 keystones isntead of brush holes
Stand for Novation Launchpad X This 3D model is a stand designed for the Novation Launchpad X MIDI controller, allowing it to be used at two incline angles: 30° and 60°. The modular design requires printing two legs, with the second one…
Ein Adapter mit 2 Zoll Innengewinde (11G 5/8") auf 38,8 mm Schlauchanschluss mit einigen Riefen zum besseren Halt des Schlauches. Bitte mit Supports drucken! Please print with supports!
A customized patchpanel for 6 E-DAT keystone modules
A 10 ports keystone patch-panel made to fit in 10-inch racks. Print A and B and slide together (tight fit) and then reinforce with some M2 nuts and bolts.
0.5u (1/2u, halfu) 10" rack ethernet keystone + cable passthrough. You can leave the cable passthrough empty, or put in a small brush. I used this one from Amazon , but can be anything that fits 9mm width 15 mm height. I used two 9mm…
gestern habe ich die Tischplattenbefestigung 40x40 (item 0.0.617.63) für die 8 Nut, hochgeladen. Da ich auch 30x30 Profile habe, aber von item da nichts da ist, gleich mal auch dafür eine erstellt. Ich hoffe ihr könnt was damit…
This is the Glitchpop Axe pulled from the Valorant game files and optimized to they are actually printable, Enjoy. -WARNING: NONE OF THE FILES ARE SCALED CORRECTLY Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't…
Man kann in die Farb-Mischpalette Farbe hineingeben und Pinsel ablegen
I used an 80 mm 5v fan that could be powered by USB. I was also going to make a version with a USB-C port but the part didn't arrive in time. I also used 4 x 8mm M3 brass set nuts with 4 x 20 mm M3 hex bolts. Watch the construction video…
Fits switches with a diameter of 25mm as: https://www.biltema.se/bil---mc/elsystem/strombrytare/strombrytare-kvadratisk-2000016436
FPV Launch Pad designed to be adjustable to suit 3" to 6" quads. I printed the main body parts in ASA for use outdoors and the cover parts in TPU to add a little grip. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Display shield for Bambu Lab X1/X1C/X1E with integrated…
Dies sind Aufnahmeschienen für einen Einhängetisch , wie in Wohnmobilen verwendet werden. Die Schienen sind jeweils 200mm lang und haben 8 Bohrungen um sie mit M5 Senkschrauben an die Wand und an eine Tischplatte zu schrauben. Das Teil…
Maybe because it's just been released, I couldn't find the released cad file at all I couldn't even get a detailed size drawing I bought it myself and measured it with calipers as accurately as possible It may not be very accurate 🥲 The…
Ein Brillenhalter für die Lochplatte Sadis von IKEA. Die Halterung wird eingesteckt und um 90 Grad gedreht. Nur ein Slot wird benötigt.
Halter für die Montage einer Steckdosenleiste an einer Tischplatte. Um meinen 3D Drucker plus Raspi (OctoPi) mit Strom zu versorgen, habe ich mir einen Halter für diese Steckdose entworfen:…
"I'm a pilot!" Launchpad has been a staple of the Disney animated world since 1987 when he debuted in Ducktales. The bumbling pilot went on to be Darkwing Duck's sidekick. He returned to our televisions in 2017 with the reboot of…
“You haven't stumbled across a pizza joint down there, have ya, Mr McDee? I'm getting kinda hungry up here...” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d…
Lego Duplo kompatibler Baustein z.B. als Dachplatte oder Bodenstein. Bausteinhöhe ⅓. --------------------------------------------------------- Lego Duplo compatible brick. E.g. for roof or floortiles. Brick height ⅓.
Ablage Werkstatt Lochplatte 15mm Ablage für die Werkstatt mit abgeschrägten Kanten und Schlitzen seitlich. ------------------- Workshop shelf, perforated plate 15mm Workshop shelf with bevelled edges and slots on the side.
Brothers landlord needed a solution for his network cables in a cabinet. Before somebody botched a 19" patchpanel into it. With this solution I got some space for the switches, plugs and Fritzbox.
This is a tubular TPU holder, for fishing rods, intended for mounting on the YetI Hitchpoint system or 1 inch Molle and nylon strap gear. Two holes in the holder allow you to use a length bungee or paracord to secure rod for carrying. A…
This is a functional remix of @YBlood's 3-Way Elbow . While the original is perfect for corners, I needed a matching Inline T-Joint to add mid-section supports and cross-beams to my PVC projects. This model maintains the same tolerances…
OneReachPrint – Adaptive Back Grooming Extension for Philips MG5720 – no tools, no hardware, just print and groom After developing the original OneReach , I wanted to revisit the design to make it even more accessible for home users –…
beide Schaufeln benutze ich heute noch... Schaufel 2 ist sehr stabil und gut zum Graben liegt schön in der Hand
Lego Duplo kompatibler Baustein z.B. als Dachplatte oder Bodenstein. Bausteinhöhe ⅓. --------------------------------------------------------- Lego Duplo compatible brick. E.g. for roof or floortiles. Brick height ⅓.
Modular, two-part 32 ports keystone patch panel made to fit in 19-inch racks. Each module has 16 keystone jacks. this frees up one row compared to printing two sets of the original.
