Liczymy pasujące modele…
So that you can also see the flames from the addon Carnage at Devil's Run on the road. It took a few attempts to find the right size. For the cars, simply clip them on the roof and for the motorcycles, from the big rig and the final five…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My 7 years old daughter designed and print her first model using Thinkercad this weekend. She wanted a stand for when sh
Wydruk około 3,39 €–4,15 € nettoWstępna wycena jednego wariantu
Ist aus dem spiel was sie auf Chrom offline spielen können.
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
There are several ways to select the next section of the track in Thunder Road. I opted for this variant. These are road tiles to choose the next Route. Just put them in a bag, shuffle them and draw one. New Version V2!!! No support…
Wydruk około 1,83 €–2,23 € nettoWstępna wycena jednego wariantu
Chromecast Remote Wall Mount A simple wall-mounted holder for your Chromecast remote (2020+ model). Keeps your remote easy to reach and off the table — clean and functional. Mount it using either adhesive or screws (holes included in the…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Chromium T-Rex Icons used on top of my pc monitor. (Icons remodeled from in Game Images) 6 Cactus 5 Birds 1 T-Rex
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
There are several ways to select the next section of the track in Thunder Road. I opted for this variant. These are road tiles to choose the next Route. Just put them in a bag, shuffle them and draw one. No support needed Colour change at…
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
I've been muddling over a way to use thermochromic filament for something other than just adding “wow!" factor to a print. Filaments used: Overture Cement Gray PLA Atomic Filament Perfect Yellow PLA Capricorn Tri-Color Thermochromic Lava…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
Never go offline in style! This Chrome T-Rex bead is the perfect little detail to customize your hoodie. Fun, nostalgic, and easy to print! 🦖 If you enjoy my creations and would like to support my work, a coffee is always appreciated! ❤…
Chrome Dino Easter Egg ! IMPORTED FROM THINGIVERSE SETTING ARE FOR MPSM V2 ! 20211217 I was searching around for a Google Chrome "Dino 404 error no internet" 3D model and never find one quite like I wanted, so I made one in SketchUp. The…
They can be used combined with each other or not. Printed with 0.4mm nozzle, 0.15mm layer height and 20% density Added freecad file in case you want to modify the design Se pueden utilizar combinados entre sí o con un sólo motivo. Impreso…
Chrome dino. Easily printable without supports if the dino and cacti are laying flat on the buildplate. Might need to be scaled slightly to fit smaller buildplates. If anyone has any questions please contact me, THop3D
Filiament Type: TPU Rafts: No Supports: Yes Resolution: 0.4 nozzle, 0.2 layer height Infill: 100 Recommened Orientation button side down
VW Alloy Wheel Centre Cap 65mm Part number - 3B7601171XRW If yours breaks and you still have the original, heat gun the aluminium logo plate off, print this file, and contact adhesive together. Alternatively, you can just print and use…
The Charging Station was designed as a low-cost alternative to commercially available charging stations for our school. The holder/charging station can be made for between $60 and $80 including the feet and power-strip. The center area…
A Fun and easy to print hard case remote for your Chromecast with Google TV. Designed for 0.2mm layer heights and prints with no supports. Does a great job preventing accidental volume changes!
Google Chrome developers surely must have a soft corner for people occasionally losing internet connections! The Chrome Offline Dinosaur game was developed by a small team of about 6 developers. Edward Jung is one of the developers of the…
Created a Google TV Chromecast Remote Wall Mount Caddy to be mounted to the back of our TV. Used command strips for mounting. Printed in PETG (incase the back of the TV gets hot) at 0.2mm layer height.
Printed in PLA.
Modeled this for someone who lost their remote backer. It's 98% as close as the stock one. Its difficult to print the small tabs closest to the middle of the remote, so better results might be achieved through a smaller nozzle or a resin…
Mount your Chromecast with GoogleTV remote on a wall or the side of some furniture with this minimalistic mount. The remote slides in snugly without any unnecessary friction. Designed with a flat back to be attached with some double sided…
this model is the dino from the no wifi game from google i original made it i suggest to print it in slower speed for the links it is a fun toy to play with or to give to sombody as a gift or for fun
I was never able to find the stylus holder for the Chromebook Duet 5. I made one that will fit the slot in the back cover for the Duet 5. It fits very tightly, so there is very little chance of it falling off. The diameter fits the Lenvo…
Small, elegant stand to use your laptop as a screen (with mouse and keyboard setup), to unclutter the desk and raise the screen to a proper level. Easy print, no supports, only 25 grams of filament. Stands stably with no flex. If you have…
My friend uses a Chromebook and his quote key ( " ) fell off somewhere. This key can replace any of the main square keys. Feel free to remix and add letters to replace specific key or fix to your size. Also works with any computer that…
Simple holder for the gen 4 chromecast. If you don't want the chromcast to hang on only the HDMI and USB cable, this holder can be used with 2 sided tape. If you need to make changes the f3D file is inkluded.
These are corner brackets for mounting a chromebook or laptop vertically using screws. The channel depth is 25mm. November 10, 2023: Added brackets with 30mm channel depth denoted by “Netbook” in the filename. March 17, 2025: Added a…
A wall mounted remote holder for Google Chromecast with Google TV (Gen.4) 0.2 layer hight printed in PLA in 1 hour - no support needed
This is a cover for the Monochrome 1.3" 128x64 OLED graphic display which can be found here: https://www.adafruit.com/product/938 Print Settings Printer: Anet A6 Rafts: No Supports: No Resolution: 0.1 - 0.2 Category: Electronics
This remix of the "Stackable Shipping Container Desk Storage Compartment" by 3D Mieks features the Chromakopia logo from Tyler, the Creator's new album on the side of the container. It retains the original stackable design, functional…
There is one dinosaurs, a bird thing and 5 cacti. No supports needed.
Chromecast remote control case / extender
A replica of Tyler the Creator's shipping container.
Godzilla doesn't care about your holiday! Remixed this excellent coaster design into a Chroma Canvas image using black, bronze, tan, and white filament in a 150mm x 150mm square, which should leave plenty of frames to choose from. :) If…
Print with the front on the bottom of the print bed no supports are needed. Additional components are needed to complete the project which can be found on the teaandtechtime.com/an-analog-aerochrome-film-replacement/ blog post.
Print with the front on the bottom of the print bed no supports are needed. Additional components are needed to complete the project which can be found on the…
The Chromecast Remote case! Features: Easy to clip in and clip out with the help of the service hole at the bottom Print it bright and colorful! Never lose your remote again!! Sleek design with a place to rest your index finger Easy…
Chrome dino with base to stand on Credit to Andrew Bell / Dead Zebra Dino Set Print instructions Layer height: 0.15mm (max 0.2) Infill: 10-20% Recommended GoogleDinos_extended.3mf and GoogleDinos_base.3mf should be printed together. I…
Edit : I resized the reinforcement to make them fit easier. The note range goes from C2 to C6 This will be a long......... journey to print, glue, paint, varnish etc.. Mine is almost done... It start to play for real. For the Print…
Uploading to make sure this legendary offline Rex bling lives on here. Print as oriented. Scale as needed. 100% is 225mm x 83mm x 20mm(same in pic).
Description Dino Chrome Keychain
MARCH 2024 UPDATE After almost two years with the old file, I was getting really frustrated with the remote case and decided to re-design it from scratch. Even though the file looks nearly identical, it has several key changes: Improved…
You can set it on your desk, hang it up on the wall or use it like a key ring.
DISCLAIMER: New PANCHROMA spools may be smaller in diameter! Please measure your spool before printing and compare to the dimensions specified below! PANCHROMA spools have a larger diameter (~201mm) than most 1kg filament spools. With the…
I remixed this model made by Jirat (originally on Thingiverse). Now it can be used as a strong keychain. Print Settings Supports: Yes Resolution: 0,2
This sleek, muscular figure captures the essence of balance, speed, and control — a futuristic being riding his board with effortless precision. Designed in a dynamic forward-lunge pose, the Chrome Surfer represents motion frozen in time…
This is a Chromaphane of the Heeler family from Bluey made using Lithophane Maker's Lithophane Maker Desktop software (LMD). A chromaphane is a type of filament painting (yes, it is similar to HueForge), but the way a chromaphane is…
I happen to sit on my Google TV remote all too often. The remote doesn't need to be see the TV at all to work. This leads to inadvertent pushing of buttons and interruptions in viewing time. With this REMIXED remote, buttons are protected…
A nice, secure mobile phone holder, even without a mobile phone. Phone can be hold in several positions. Inspired by mightynozzle.Thanks Print Settings Printer: Anycubic Kossel plus Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 25 %…
As I was asked on how to print this one in one color I made a short remix for single material printing. In the set: Body (scale to 400% OR 230%) Wings separated for less supported printing 2 sets of Wings (please see Print instructions…
A 4"x4" mini lithophane of the album Chromakopia.
I recommend to print it with a wall thickness of 2mm and to use wood pla. Because you'll want to sand it and glue the different parts. Also, you'll want to varnish it. You'll must tune it with bee wax! It's left handed.. (Long tube on the…
Wall mountable remote holder for the Google TV Chromecast.
Chrom's Falchion from Fire Emblem Awakening, modeled in Solidworks. Made to as accurate as possible. All one piece, intended for figurine scale/ keychain design, but can be scaled to any size. Will post multipart piece if requested…
Motivation: I saw many bulky clips for whiteboard markers and chose to design something more visually appealing. Features: Vertical and horizontal storage is possible Neodymium magnets Ø10x3 mm or smaller magnets or M4 screws can be used…
Simply put some double-sided adhesive tape under the Holder and stick it to a wall. Print time: 1:30h Costs: 10ct Print Settings: Printer: Ender 3Pro Rafts: No Supports: Yes Resolution: 0,16mm Infill: 20% Filament material: PLA
Use an Elinchrom portalite softbox on an Bowens mount light
This is a replacement insert for the Sidchrome tool sets shown. It will likely not fit other eras than those shown, as some of the individual tools changed dimensions frequently over the years. Found these files useful? Buy me a coffee !…
Remember to add filament change scripts at layer where you want color changes (example in pictures). V1.1: Added Dino's eternal nemesis to the scene: cactus. V1.2: Now with a lovely twist, in fact two of them. V1.3: Added festive Dino,…
Pixel dino fled Chrome for your shoe to stop dodging cacti. Now ruling prehistoric style & offline mode.
he original space bar tends to have issues with its metal bar beneath as the connection clips bend and wear with time. So i had to make my own. It took some time to mensurę things correctly but it finalny works. Instalation: - Remove keys…
Edit : I resized the reinforment to make them fit better. Not made by me. It's made by Caran. The original file or here : https://www.thingiverse.com/thing:1129462 The original had a major issue. The tube where calculates to be exactly on…
This is for anyone who wanted to attach their Apple AirTag to the Chromecast with Google TV Remote.
This is a remix of torystark's model over on Thingiverse. https://www.thingiverse.com/thing:4825994/files Description The model is great on its own, but we needed a way to find the remote when it disappears in the living room. This uses a…
Stand for the chromecast remote. Like my other model, which has an additional place for a hitachi beamer remote. There's also a small compartement for a pen or something similiar. There's a second modell with a slighlty bigger…
Nothing special, except you may need to adjust your flow rates to make it a snap fit, both of worked well.
Simple design, super-snug fit. If you have access to multicolor printing, then add filament swap after first layer which is at 0.2mm. Meant to be printed at 0.2mm layer height with up to 0.6mm layer width. 14.09.2025 - added version with…
This is a reupload of a model that I converted to .stl format. The back of the figure is sadly very thin and might print with holes in it. Print Settings: 0.2mm Layer Hight 10% infill Tree supports
Update Ver 3 is updated 20250225 - Better fit Chromecast remote rear cover :) Print slow and fine for best result. Please comment the model :)
Print with 3 walls. No brim required usually. f360 file included.
NOT 100% ACCURATE This is a rough model, but close enough to help when modeling parts for the head.
Chrome dino. Easily printable without supports if the dino and cacti are laying flat on the buildplate. If anyone has any questions please contact me, THop3D
BEFORE YOU PRINT Three parts need to be printed in Vase Mode / Spiral Printing: The LED Strip Holder, Diffuser, and Shade. -The Shade should be printed with 3-4 bottom layers, which become the top of the lamp. -The LED Strip Holder and…
Project: CHROMAKOPIA HueForge.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 210x210mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and…
A holder for a Chromecast with Google TV. To keep the stress from a dangling device on a HDMI cable Use double sided tape to attach it to the back of your TV Prusa PLA Might use some supports on the inner curve / overhang
This is a low investment (only about 60g each side) master spool scaled for polymaker refill spools. For me these came out as press-fit into the cardboard. I thought this design was pretty so I used it as a base despite the fact that the…
90 MM wide CH coasters. Made them 7 MM tall to fit 2 MM cork non-slip bottoms on them. Please enjoy!
I printed this with 20% grid infill without support.
v2 has 2mm shell as v1 had trouble printing due to overhang
Tired of losing your Chromecast TV remote between the cushions? Well this is the STL for you!
We couldn't find a 3D-printable Chrome Dino to our satisfaction - so we decided to make our own! This is an easy beginner print. It could serve as a mini desk decoration, or maybe you could slap a magnet on its back - voila! Fridge…
Aside of running in the chrome browser waiting for the rebooting modem, the pixelated dino can now run on the kitchen tabletop as well.
Quick prototype for a 110 film holder to elevate the film when scanning with a DSLR. Model parts should snap into place. Tested on a Prusa Mini using 0.15mm nozzle under SPEED settings in Prusa Slicer with a 20% infill If you want this…
making felt cushion felt washer punch jig chromatic button midi keyboard https://shop.yushakobo.jp/products/consign_giabalanai
Chrome key for the shortcut keyboard I am making using this [guide]( https://www.makeuseof.com/tag/make-custom-shortcut-buttons-arduino ]. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.6…
Replaced the base with a 1x1 gridfinity base so it can have a nice spot on my desk!
Designed specifically for the ModRetro Chromatic, this sleek and functional stand provides a stable and stylish base for your device. The stand is made with precision to cradle the device securely, ensuring easy access and optimal viewing…
Pretty self explanatory. no supports required 0.2mm layer height 0.4mm nozzle 20% infill PLA
This is a Chromaphane of the Buc-ee's logo made using Lithophane Maker's Lithophane Maker Desktop software (LMD). A chromaphane is a type of filament painting (yes, it is similar to HueForge), but the way a chromaphane is generated is…
Filled in the bottom, chamfered the bottom edge so it's a bit more ergonomic.
Dimensions 40 x 62 x 14 mm.
A 10.5cm long Chromakopia keychain. I have provided single colour and dual colour files ready to be printed. If you don't have a AMS unit you can pause the print at the first layer of the text and swap to another colour.
I wanted to close the big gab behind the Chroma Kit on my Phrozen Arco. This design leads the tubes inside the printer from behind the Choma kit, from being in a line to exit in a square. Two new revisions has been added. V2: Tbe manifold…
Overview Updated: The design has been adjusted to tilt back the stream deck slightly for more stability, especially when using the keyboard feet. I've also increased the height of the "tab" on the support to better grip the keyboard. I…
Google Chromecast Remote Holder for Screw or double sided Tape
![Chrome Dino Pendant [Collections]](https://media.printables.com/media/prints/667415/images/5373379_f86210ab-56ce-4a56-a294-60e95ac2ee2d_ccd61554-2290-4843-a3e1-1d48a3527c75/plusdinos.jpg)
