Liczymy pasujące modele…
The printed part can be used both as a holder for presentation and for mounting in the car. The HELIX CONDUCTOR fits directly into the cutout by clamping. No support structures are required and for use in the car only ASA or similar…
I needed a system that allows me to quickly connect and disconnect the ventilation duct of my air conditioning to take advantage of the same ventilation duct and occasionally connect my Prusa Core One or my Creality K1C (coming soon) to…
Print 1x handle and 1x shaft, with length of your choice, and glue them in place. Print shaft with a relatively stiff material. PLA, PLA+, PLA-CF, PETG-CF and PC-CF. Do not use PETG, ABS, ASA, and Nylon, they either fail to maintain…
FULLY REVISED MODEL (APR2026) Nederlandse Spoorwegen DG conducteurswagen in gauge 1 / 1:32. https://nl.wikipedia.org/wiki/Dg_(spoorwegmaterieel ) The concept for bearings, wheels, buffers, couplings, etc.......... is the same as I applied…
A compact, 3D-printable case designed to snugly fit the nRF52840 devkit.
A compact, 3D-printable case designed to snugly fit the nRF54L15 devkit.
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
Here is a simple digging knife that is pointy enough to break up dirt, but sturdy enough to not snap immediately. Great for uncovering and finding buried items of all shapes and sizes. Most of all, it looks cool. Printing Instructions:…
utilizado para transmitir movimiento entre ejes.
Locks well with 4 tabs, but a dab of hot glue inside sleeve can be used as strain relief and more permanent fixation. Original file didn't have a 2-conductor version. Pulled from the source's FreeCAD file and cleaned up tolerances. All…
The model prints without any support, the layer height should be set to ruffly 0,15mm. We highly recommed to use a material, which withstands high temperatures, such as ASA or ABS.
печать из материала ABS или PETG @сопло 0,4 мм you will need 2 bolts and 2 nuts, which are best soldered
Category: Kitchen & Dining
This prints as one part, uses 6 LEDs, and no wiring or soldering required! I designed this to be printed with MMU. It requires a conductive filament to act as the wiring. Using this filament is something that has excited me for a long…
Conductor for 18mm panels remix by voltNik Ремикс кондуктора от voltNik'a для панелей 18 Remix from https://www.thingiverse.com/thing:5228089
The model prints without any support, the layer height should be set to ruffly 0,15mm. We highly recommed to use a material, which withstands high temperatures, such as ASA or ABS.
Conductor for profile pipe angle 45 degrees - 40x20, 40x40, 60x30, 60x60 Кондуктор для профильной трубы под 45 градусовю PTEG Infill 25%, 3 Walls
The model prints with support, the layer height should be set to ruffly 0,15mm. We highly recommed to use a material, which withstands high temperatures, such as ASA or ABS.
The model prints without any support, the layer height should be set to ruffly 0,15mm. We highly recommed to use a material, which withstands high temperatures, such as ASA or ABS.
I use this holder for Lenovo X3, but this is also suitable for other headphones Printing settings layer height: 0.2mm perimeter: 4 infill: 20% cubic
The published Chube Integration model leaves a lot to be desired. This is a reverse engineer of the Chube using the published integration model from the Chube folks as a base. Everything is determined from publicly available pictures,…
Furniture conductor with bearing 625 2RS for drill bit 5 mm
I missed out on buying the conductor baton from the KH Orchestra so I made my own! I was able to print it split horizontally on a Taz 6 (see below) I just extended the middle and key (teeth?) area of this model:…
Tray for Nordic Semiconductor nRF9160
Collection of various feed-throughs for hoses for a Juwel aquarium. As my 240 litre Juwel aquarium is positioned with both long sides in the room, the standard hose feed-throughs have always bothered me a lot. They are ugly and the hoses…
A compact, 3D-printable case designed to snugly fit the nRF7002 devkit.
The model prints without any support, the layer height should be set to ruffly 0.15mm. We highly recommed to use a material, which withstands high temperatures, such as ASA or ABS. On the bottom is some space for cables.
Having to act on the potentiometers of my stepper motor drivers, I needed a non-conductive ceramic or plastic screwdriver, so I thought of printing a 4mm bit with a PLA slotted tip. For component strength, print the bit horizontally, with…
Stojánek pro kombinovaný ruční měřič TDS, salinity, pH- … Metr má svůj kalíšek na měřící špičku. Je optimální pH senzor držet v roztoku (používám typickou koncentraci KCl). Metr často padal, vytékalo to, tak jsem si udělal tenhle…
Iconic Movie Moments - Amadeus - Conducting the Orchestra - 1984
This is a custom mount that I made for Helix DSP conductor mount that will fit in perfectly in this storage box : https://fr.aliexpress.com/item/1005001926331448.html?spm=a2g0o.order_list.order_list_main.10.21ef5e5bM48GOV I've also added…
See https://www.hackster.io/TurtleForGaming/bone-conduction-glasses-77e05c for a full post Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: 0.06 Infill: 50 Filament: Amazon PLA Yellow Notes: Infill…
Creality K2 plus no hace buenos voladizos, re acondicione el ducto original, haciendo mas directo el flujo de aire, asi el filamento se emfria mas rapido y hace impresiones mas prolijas.
Have you ever needed to quickly get out of bed and fumbled around to turn on your bedside lamp? If so, you need a touch lamp! Simply reach over and touch it! The magic gnome does a little dance and turns it on, simple as that... Okay,…
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
This is a rugged case for the Nordic Semiconductor Power Profiler Kit II. It holds the PPK2, two micro USB cables, the breakout jumper wires that come with the kit, and some extra jumper wires and probe clips. Below the PPK2 is a cavity…
Conductor to make a holes in V6 heat sink (M3) Updated Eva head for V6 cutted + Vulcano
Bonjour ! J'avais besoin d'un outil pour ajuster les Vref de mes driver. N'aillant pas de tournevis céramique, j'ai décidé de m'en faire un en plastique. Donc voici un petit outil minimaliste et pratique pour ajuster le courant sans…
This is my first draft of a conductor's baton. The model is divided into 3 parts, which have pegs to reinforce the adhesive you choose to use to glue the pieces together.
For SUPER EARTH! Inspire your team by demonstrating your commitment to FREEDOM and DEMOCRACY with this cool keyring / bag tag. Channelling my love for FREEDOM and DEMOCRACY, whilst downing the odd cup of LIBER-TEA, I reproduced the…
Hey folks, this is my very first own design. So if you have any comments on how to improve it, I'd be glad to hear them! In chemistry lessons, there are often situations in which the conductivity of solutions or solids is tested in order…
15x15x15 stone with 9mm or 13mm hole for mounting a semiconductor laser. A holder for a two-pole JST-PH connector is provided on the side. The laser can then be connected with flexible two-wire wiring.
A simple case for the Nordic Semiconductor nRF51-DK development board. There are openings in the 3 of the case sides for wire routing to connect externals as well as USB. Category: Electronics
This is a repost of one of our earliest prints made out of conductive filament! Using a more modern technique this can be done quite easily with a single extruder. Check out this guide to learn how to do it using PrusaSlicer. Guide:…
The Manticore 3D Printed Non Conductive Shaft Extension was designed to alleviate issues caused by having a conductive carbon fibre lower shaft bolted directly to the coil. This is particularly important for gold prospectors who…
I printed the Original and a friend asked for some of the other mission results, especially the less successful ones! Channelling my love for FREEDOM and DEMOCRACY , whilst downing the odd cup of LIBER-TEA , I reproduced the original item…
Sailfin extruder adapter for voron 2.4, and berd-air cooling mod.
Tappo per porta bacchetta direttore d'orchestra
I was attempting to design a simple flashlight using conductive filament with the goal of being entirely printed (just add batteries and bulb) with a single extruder 3d printer. After several iterations with limited success ( see here ) I…
Buttons printed with conductive filament for fischertechnik to be used with capacitive touch hard- or software. Can be used with: Dedicated touch pins of some specific microcontrollers, e.g. ESP32 touch sensor pins I2C touch sensor…
The Giant Conduct brake system comes with Garmin mounts but no Wahoo support. I didn't want to print a Garmin to Wahoo adapter so I mocked this up. I printed without supports.
Bone conduction headphones often have a metal band that runs behind the wearers head. After long use and wear, or due to accidents, this metal band may break. With N=2, it often breaks just behind the earpiece (see photo showing one…
This design is called a superconductor because it looks like something that might transform energy. It is designed to be printed without supports. Please "Like" this file, if you collect or download it. Category: Sculptures
Tired of waiting for peer-reviewed papers? Reproduce LK99 today! Printed as two separate pieces and applied a tiny amount of glue (shhh) to the LK99.
para sujetar el ventilador en el hoteng hay que colocar una cinta de doble cara, yo no me he complicado y asi va bien, hay que modificar el led de color azul que alumbra la boquilla, yo lo he cambiado de sitio para ello hay que modificar…
Printable version of my Chube Conduction model. Some liberties taken - the main block is extended at the heater area and the thermistor is skooched up to avoid overhangs. Little nubs help the flathead screws print. F3D model:…
The resistance of the printed trace is quite high despite its large cross-section, and the white LED barely lights up—even though it's powered by a 9V battery. For printing, I recommend feeding the filament directly into the extruder…
A non-conductive screw driver for adjusting amplifiers, crossovers, and other electronics that you don't want to risk shorting out with a metallic screw driver. Printed with a .2mm nozzle and 15% infill. Printed with the handle of the…
With MK3S+ with 0.6mm nozzle orginal & this remix model prints OK without added support, but it won't do any harm to add those either. Lid addon part, which can used to add additional color & close top part holes, can be pressed to lid…
My first upload. it's a simple one but was a good learning experience transferring a JPEG to stl and putting it together Prints ok. Its a touch thin if I'm honest but i'll work on that. Printed face up with tree supports
Ersatzgummi Fuß für die Traverse einer Stehleiter, der untere Teil ist für mehr Stabilität mit 50% Infill gedruckt, Filament Flex 92a Replacement rubber foot for the traverse of a standing ladder, the lower part is printed for more…
Should be a press fit. I suggest drilling the hole for the cable on the flat portion at the bottom a typical size so later you can use a standard plastic plug to undo all this.
So this a thicker conductor so you can mount Bowden coupling and guide you filament through ptfe tube Category: 3D Printing
Update: Success! Feel free to continue below for perspective on this project, but there is now a working model on Printables here . I was attempting to design a simple flashlight using conductive filament with the goal of being entirely…
Print Settings Rafts: No Supports: No Resolution: 0.15 Infill: 35% Filament material: PLA+
It's a balanced conducting baton. Print with: 100% infill (or 25 wall-layers = same effect) to get the balance. brim on to limit warping 0.12mm layer height or lower (0.2mm works but feels worse)
Wife wanted an image of Goofy as the train conductor for a Disney hat she is making. Found an image, converted to .svg file using Inkscape, and created a 3d .stl file in Tinkercad.
This is an awesome reason to start getting into conductive filament. It's an awesome feeling to take your print off the printer, plug it into the computer, and have it do something. This project is still experimental, but functional, and…
A container to collect all the victims of your mistakes.
Safely dispose your collectibles after the magic smoke is used up.
Single Box With Cover For Wire Connectors Push-in Conductor Terminal Block (2 in 4 Out)
Overview Developed to allow height probing of the RepRapMicron micron-scale 3D printer's build platform , this also allows conductive objects to be height-probed. The holder accepts a square of microscope slide and features a grounding…
Recommended print settings: Layer Height: 0.2 mm or less Infill % : 20 Supports: No Print Orientation: Default as modeled Material: PLA Brim: Optional After printing, the charger cable presses into this part. It takes some force, but this…
Onshape: https://cad.onshape.com/documents/7edeb35b745dab8b7d455709/w/4fec87d891128a727249f84e/e/6f9047b3a915958941e36436?renderMode=0&uiState=696ab8a41c7efa5c7b6ba328
An experiment with conductive Abs combined to normal Abs Printed with BFB IeC Refurbished and Flux capacitor multi material 3D print https://youtu.be/RwOpyk0PgTQ Assembly and test https://youtu.be/w7TTaFWJR4E Materials Raft: Pla Chassis:…
Nordic Semiconductors nRF9160 Goboard tray
Sin soportes otro con soporte Utiliza 14,89 g de filamento y tarda 1h,32m placa 1y Utiliza 7,30 g de filamento y tarda 32m placa 2 Para obtener mejores resultados, use PLA Se agradece enormemente cualquier comentario, valoración e imagen…
For the Part#1 and Part#2, you need to have a large plate. I have printed them with my CR10 V2. I have indicated the different diameter for those parts. Assembly part: Part#1_Socle (286mm diam) Part#2_Yarn (Black color). I have used Matte…
This duct was designed with an intention to keep a low profile for non-planar ironing, without suffocating the airflow path. With the moderate angle shape, any Beacon3d formfactor should have no issues settling in. SLM shields are…
The Nox 900 shaft extension was designed to alleviate issues caused by having a conductive carbon fibre lower shaft bolted directly to the coil. This is particularly important for gold prospectors who are experiencing knock sensitivity…
This custom holder is designed to store up to 8 PASCO conductivity sensors safely and efficiently. Each sensor fits into a dedicated slot with a recessed base to prevent slipping. The structure saves space and keeps the lab organized. The…
For the Part#1, you need to have a large plate. I have printed them with my CR10 V2. Assembly part: Part#1_Socle (257mm diam) Part#2_Yarn (Black color). I have used Matte PLA Part#3_Yarn (Yellow Color) Part#4_Complete Armour (Silver and…
Use this to mark your lightning conductors. Print in PETG is recommended.
My dad drives an old Blue Bird RV camper and wears Shocks bone conduction headphones while driving. But he needed a spot to store them when not wearing them and wanted it to attach to his phone. His design had his nickname and the Blue…
this is a bone conducting mask created using an mh-m38 and a bone conducting transducer which is attached with a magnet for mobility links below: mh-m38 Bluetooth receiver:…
A simple mini baton model for little train enthusiasts. This is printed as a multicolor print without MMU. This technique uses virtual extruders to print different colors on the same layer. The gcode to switch extruders and change…
This 3D printable educational model demonstrates the basic principle of semiconductor doping using a physical, hands-on approach. The model consists of a base plate with recesses for individual atom pieces. Silicon atoms are represented…
Screw mountable Routing Ring for ceilings and walls. Step file included. Please leave me a “Like”, Thanks for downloading
conductor de filamento para impresora
Use to tell the difference between P1 and P3 cable. 500, 750, and 1000 cable sizes. Based on old metal gauge. +/- 0.02mm tolerance. P1 cables have a slightly smaller center conductor than P3 cables, leading to opens/shorts in the cable…
i made this with fusion 360
We use these sensors in our custom autosampler setup to detect fluid at different stages. Required materials: PTFE tubing (1.6 mm OD, 1 mm ID) 0.4mm gold-plated wire (from art supply) Superglue Epoxy resin cable with at least 3 wires…
10mm socket Wrench for LiFePO4 battery terminals. Non conductive and small hand grip design to prevent over torque / over tightening of the 10mm bolts. Safer than using a metal 10mm wrench, which may accidentally make contact with other…
Make sure to replace white with conductive filament.
This is a cup holder insert designed to fit a BMW G26 cup holder. It may also fit other BMW models. It consists of a mount for the Helix Audio Conductor Pro and a charging dock for the FiiO M33 DAP. Other FiiO players with two USB-C ports…
The mount holding area is 27mm W x 13.5mm H. It is for cable hider / cord hider 0.95" W x 0.55" H, e.g.…
