Wyniki wyszukiwania: cps

(CPSH) Cotton Pad and Swab Holder

Keep your vanity or bathroom counter organized with this sleek, minimalist Cotton Pad and Swab Holder (CPSH).

CPS SP2 Stock Remix

Printing recommendations as per the original model however I chose to go with a 50 percent infill printed in PETG. I've removed a large number of the bonded sections leaving only two parts that need gluing together. These will all fit on…

ACPS Badge ID Holder

If model is to large when importing scale to 10% of the original size.

Umarex Bridge Mount for Walther CP99 / Umarex CPS

CPSC Small Parts Test Cylinder

This is a model of the test fixture that is used by the US Consumer Product Safety Commission to determine if a product has small parts and is not suitable for children under 3 years old. Reference Figure 1 in 16 C.F.R. § 1501.416 C.F.R.…

Pellet fast loader Umarex CPSport

I do not own 4 cylinders for Umarex CPSport (Walther P22 replica) so i wanted to design my own one cylinder speed loader instead of the square quad one. Just put the cylinder into this loader, get there a few pellets or BB brocks (these…

Gridfinity for PCPS Primer System

This is a storage tray that fits the gridfinity system to organize your tools. All the spare parts for both the large and small primer bar pins etc (everything that comes in the box) have a home in this tray. This is designed to clear the…

Vertical CPS2 Feet

Set up your CPS2 vertically on the ground with these feet.

Capcom CPS3 Standoffs for Jasen's Customs/TR Fightstick Metal Cases

This model is a standoff for CPS3 mainboards in custom metal cases by Jasen's Customs or TR Fightstick. Placing standoffs on the bottom of the CPS3 mainboard prevents unnecessary flex when inserting the security cartridge, which is a…

Benchy ACPS Model v1

20mmx20mmx20mm Dimensions +/- 20 min print time Intended for PLA with a 0.4mm nozzle but could be used for a variety of materials and nozzles if scaled appropriately. Design Features: Micro & Macro Text 50 Degree Overhang Chamfer Filet…

CURAPROX CPS Stand

Holder for your Curaprox CPS, can hold 4 cps and 1 Flosspic.

Dust Cover for Primal Rights Competition Primer Seater (CPS)

Are you tired of accidentally dumping powder down the seating stem hole of your Primal Rights Competition Primer Seater (CPS) and then having to disassemble it to clean it out or risk having it explode in your face? Well… Maybe don't be…

Finger Wrench for Primal Rights Competition Primer Seater (CPS)

The user manual for the Primal Rights Competition Primer Seater (CPS) says not to use tools to tighten the shell plate holder screws — finger tight only! In practice, I've found “finger tight” to be barely sufficient. While it's…

ACPS First Layer Adhesion Test Model 220x180mm 0.1/0.15/0.2/0.3mm layer heights

ACPS First Layer Adhesion Test Model 220x180mm 0.1/0.15/0.2/0.3mm layer heights

Mounts for Gophert Power Supplies (NPS-1600, NPS-1601, CPS-3205 etc.)

To free some space on my workbench I wanted to attach my Gophert power supplies to a shelf above it. So I designed these mounts which also offer the extra benefit of keeping these light and compact devices in place while being operated.…

ACPS Maker Award

4 piece Maker Award with the ability to create custom plaques. no supports needed if 3D printer is reasonably tuned. Trimmed the Benchy wave to fit the base of this trophy base. Scale to 10% before slicing.…

ACPS Tag (Serviced and Calibrated)

ACPS Tag (Serviced and Calibrated)

Primal Rights CPS parts holder

I designed a parts holder for my Primal Rights CPS. It holds both shuttles, both primer punches and one LEE shellholder set in its original case. The mounting points are designed for countersunk screws with heads no larger than 8mm in…

ACPS iPad Case Tool

A shim or tool to help with installing stubborn foam EVA ipad cases. Printed with 4 perimeters, 4 solid top and bottom layers, 20% Cubic infill Model should be oriented on its side for added strength. PLA works great for this model in my…

Steinbach Pump CPS 40-2 Cover Cap

Material: PLA Temp.: 215°C Heatbed: 0-60°C

ACPS Butter Battle Book Flag Trophy

ACPS Butter Battle Book Flag Trophy Printed in PLA, Flag stand may need some material removed to hold flag.

ACPS IPEVO Do-Cam Riser Stand

Riser stand for IPEVO Do-Cam which permits viewing a full 8.5"x11" document. Slides over the long side of the base. Printed in PLA, no supports needed but could benefit from supports on the buildplate only, 25% infill, minimum 2 exterior…

CPS3 (Kit) Controller Side Cover Mod

Cover for the sides of the controller for the CPS3 underwater drone ( https://www.cpsdrone.com/ ). I wanted something to protect the exposed PCB from getting water on it easily from splashes. (Note: the Kit has been great so far,…

PCPS Precision Primer holder for peg board holder

just a peg board holding tool for the PCPS next gen precision primer seating system by Derraco Engineering. prints just fine without any supports at least when printing with the pegs for the peg board are printed separately. As you can…

ACPS 500W & 13W F12 Imaging Jig

A tool to help with summer imaging.

Cyberpower CPS1500AVR faceplate repair bracket

I made these brackets to fix a Cyberpower CPS1500AVR battery backup device I purchased used. The L bracket / hooks that hold the front faceplate on were broken. Since straight gluing them would not be strong enough I created these small…

ACPS iPad Asset Tag Alignment Tool

Print Settings: Layer Height: 0.2 mm Perimeters: 3 Solid Layers Top: 0 Solid Layers Bottom: 0 Infill - Fill Density: 25% Fill Pattern: Honeycomb Perimeter Extrusion Width: 0.45 mm (MK4 standardized but verify before slicing) Brim Enabled…

Evolution S355CPS Feet

Spare Feet for Evolution S355CPS Saw

OSCR (Sanni Cart Reader) CPS3 Cover Plate

Update June 1, 2026: Added SIMM size labels as it became apparent when I was programming mine that I need to see which socket / connector was which. This is a cover plate for the OSCR CPS3 adapter designed by herzmx. I didn't like the…

CPSC Small Parts Cylinder & Small Ball Tester (16 CFR 1501 + 1500.19)

CPSC Small Parts Cylinder & Small Ball Tester (16 CFR 1501 & 1500.19) Combined 3D-printable compliance testing tools for U.S. Consumer Product Safety Commission (CPSC) small parts regulations — ideal for toy makers, Etsy sellers, and 3D…

CPS3 (Kit) Shark Fin Mod

A silly mod to add a shark fin to the top of the CPS3 underwater drone (www.cpsdrone.com). Uses the existing screws that hold the buoyancy foam in place.

Capcom CPS3 TRFightstick Case Port Covers

I bought the beautiful case from TRFightstick for my CPS3 pcb but the ports on the back are open and aren't necessary in some cases, so I made a set of port covers for them. Print in TPU so they easy to plug in and pull out. I used…

Capcom CPS2 DigitalAV Mount

Marqs made an awesome HDMI mod for the CPS2 system but no one has made a mount yet cause the entire board just sits on some pins that sits on 2 ICs. Just too much pressure would be put when inserting and removing the HDMI cable, so this…

CPS3 (Kit) Shark Fin Mod

A silly mod to add a shark fin to the top of the CPS3 underwater drone (www.cpsdrone.com). Uses the existing screws that hold the buoyancy foam in place.

ACPS Maker Award

4 piece Maker Award with the ability to create custom plaques. no supports needed if 3D printer is reasonably tuned. Trimmed the Benchy wave to fit the base of this trophy base. Scale to 10% before slicing.…

ACPS Network Face Plate v1

Optimized face plate for Panduit replacement. Single Double Triple Quad Blank

BlueSCSI V2 Desktop CPS3/CPSIII Edition

Case for BlueSCSI V2. The board slides into the case and is held with a screw. I have been using the board as an ODE for Capcom CPSIII system but can be used as ODE in old computers as well. One screw M3x6mm is needed

ACPS MK4 Print Bed Calibration model

Model was designed to visually indicate any bed warping and inconsistencies leading to print issues. This model prints a single layer at 0.2mm and 2 walls at 0.5mm.

CPS3 (Kit) Controller Side Cover Mod with charging port Remix

Printed with Amolen TPU Transparent Rainbow Blue Green Orange.

Capcom CPS2 Caps

Remixed version from these: https://www.thingiverse.com/thing:3886448 Made the back a hex shape, so with inaccuracy of 3D printers the 2 halves of the Shell wont pry apart. Also added a little recess to get them out slightly easier…

Ryobi-R18CPS

Ryobi-R18CPS RYOBI ONE+ VERKTYGSHÅLLARE