Liczymy pasujące modele…
A little organizer I made for storing all of my girlfriends hair ties, clips and pins. It's 200 mm x 120 mm and should fit on most of the common bathroom shelfs. The four bigger compartments on the left side of the model are slightly…
This is a scrunchie holder thats shaped like a cactus. My fiancee asked for a scrunchie holder and loves cacti, so I made this for her. She loves it and its very easy to print. The pot is designed to hold it and provide some counter…
A place to store all your scrunchies or your wifes ;) Happy Christmas XD Printed in multicolour pla for nice effect. Print flat no supports needed.
DIY IR Turret V2.0 - Inspired by CrunchLabs' HackPack This is the SECOND version of my own 3D-printable version of the IR Turret inspired by CrunchLabs' HackPack. I built this project as a personal challenge after realizing the kits…
CrunchLabs is a subscription box engineering kit designed by Mark Rober. CrunchLabs Box 1 is a disc launcher using a flywheel to throw small plastic discs. This project has variations on designs to get different results. Try them out and…
Keep your scrunchies and hair ties neatly organised with this convenient wall-mounted holder. Designed to be attached to a wall or cabinet using command strips, this holder eliminates the need for drilling and ensures easy installation.…
CrunchLabs has monthly build boxes with crafts. Build Box #1 is a disc launcher that comes with six discs. Your kid will probably ask you to print them some more discs. Mine did. Printed at .2mm layer height, no support, no brim/raft, in…
Mark Rober crunch labs disc launcher spare discs no supports needed just print it upside down. P.S. You can use a paper towel core and slide it inside the original disc launcher cardboard core to create an extended magazine!
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
See it in action - https://www.youtube.com/watch?v=6uOr2lsWAE8 Current sizes: 14mm - Lots of AAA sized lights 24mm - Wurkkos FC11, S2+ 25.5 - FW3A 26.6 - S21A 28mm - Emisar D4V2 28.5mm - Noctigon KR4 (even though the bezel is 29mm, this…
Would print this as I did, with 100% infill on the base layers to give it some heft. You can add a height range modifier to the slice at 12.7mm to encompass the entire base and add an infill modifier at 100% to achieve that.
IR Turret PIR Mount - Crunch Labs Hack Pack 001 Overview This is a 3D-printed mount designed to securely hold a PIR motion sensor ( Keyes PIR Motion Sensor Module HC-SR501 ) onto the CrunchLabs IR Turret from the Hack Pack. This lets you…
Wall or cabinet mounted organizer for women's scrunchies. Needs 3M double sided wall mount stickers to attach to any surface.
The friend that requested the hair stick holder ( https://www.thingiverse.com/thing:2364443 ) also asked for one of these. The one I did find on here was a bit more complicated than I needed, so now I present you with this version. It's…
DIY IR Turret - Inspired by CrunchLabs' HackPack This is my own 3D-printable version of the IR Turret inspired by CrunchLabs' HackPack. I built this project as a personal challenge after realizing the kits weren’t available in my country…
This is a modification to CrunchLabs Disc Launcher to allow for more than 6 discs. Print Disc with 0.15mm layers. Extender can be 0.3mm layers.
IR Turret Nerf Dart - Crunch Labs Hack Pack 001 Overview This is 3D-printed replacement ammunition. No rubber band is required . The spring is 3D-printed. 3D Printing Info Print Time : Approximately 30 min on Prusa MK4 Material : PLA/PETG…
Mark Rober made a subscription kit, CrunchLabs, and the first build is a disc launcher. I found that the discs kept flipping over, and it would not work when the discs are upside down. This cap will keep the discs upright because of the…
If you want to get your kids to “think like an engineer”, I highly recommend Crunch Lab Build Boxes. Replacement legs for the Crunch Labs Build Box - Trip wire. https://www.crunchlabs.com/products/trip-wire Although Crunch Labs do now…
Replacement Discs for the CrunchLabs Disc Launcher project. Also an extendable hopper that can hold 6 additional discs. Multiple hoppers can stack and be secured together with rubber bands as pictured. The discs don't fly quite as far as…
Scrunchie holder printed in pla with tree supports and glued with super glue. Height approx 19,75 cm
Printing: No supports, 15-20% infill, 3-4 walls. Assembly: Assembles just like original parts, but bigger.
IR Turret Buzzer Mount - Crunch Labs Hack Pack 001 Overview This is a 3D-printed mount designed to securely hold a buzzer onto the CrunchLabs IR Turret from the Hack Pack. The buzzer allows you to play different tones while firing the…
I wanted something to print out for the Kids. I hope you enjoy it as much as I have!
Mark Rober's Crunch Labs year 1 month 1 disc, the kids are going to lose the disc that came will in the box, so I made printable replacements
This model contains multiple STL files. At minimum, you should print the cactus sliced-top and cactus pot models. I also recommend printing the sliced-top model with fuzzy skin! It adds a nice aesthetic.
I believe printing upside down should eliminate the need for supports. This installs the same way as the original. Just holds a LOT more discs.
A simple crunchy taco stand. I hate when they fall over when being filled and eaten. This is my solution. A quick print. Bear in mind that gappy prints might not be sanitary in the long run. I printed in fairly dense PLA and clean it…
Hair ties stand / scrunchies holder A simple and practical stand for organizing hair ties and scrunchies. The main post also features a groove for holding hair clips. All parts are printed separately and assembled using a simple press-fit…
Print with supports on buildplate.
# Aura Arch – Hair Claw Clip & Scrunchie Tower with Vanity Dish Say goodbye to messy bathroom counters and lost hair accessories! The Aura Arch is a sleek Scandinavian vertical organizer designed specifically for claw clips, scrunchies,…
This model can be wall mounted, or stood up on its feet. I printed this in black PLA, with a very low infill.
A horizontal belt holster for the discontinued Leatherman Crunch. Inspired by ZapWizard 's holster designs. There are some holster designs on Etsy but my design is much more streamlined and minimal. The Crunch locks in using the…
This is a holder to display your Crunch Labs Gear Train on the wall. It requires two standard push pins.
When you get the disc launcher (https://www.crunchlabs.com/products/disc-launcher), you have 6 disks coming with it. If you need more, you can print those.
Crunch Labs Tripwire Leg in 3D. 0.3cm high.
Mountable scrunchie holder. needs the flanges to be heated with heat gun or hot water and bent to suit. Category: 3D Printing
Magicians' gimmick. Crunch is my take on a joint-cracker. Designed for easy palming and ditching, you can hide, transfer and get rid of it easily in your finger-cracking and wrist-cracking routines. You'll need a printer that is capable…
CrunchLabs Platinum Ticket Replica
Simple model in OpenScad, try changing the parameters for different shapes and sizes. Latest source at my GitHub repository: https://github.com/vhotspur/3d-things .
This is a replacement bumper for the squishy, quarter-circle that guides the CrunchLabs Disc Launcher flying discs at launch. Easy to print and works with any material. Use your standard print settings.
I'm building simple display units for every month of the crunch lab engineering box, I only started with this one because this one was on the floor in my way No supports needed, I did 10% infill
This is a replacement leg for the CrunchLabs Trip Wire kit. When my kid broke the leg to his kit, I found one of the two on Printables (https://www.printables.com/model/495639-crunch-labs-build-box-trip-wire-legs), but not the second leg.…
Beschreibung: Ersatz Rolle für die IR Turret von CrunchLabs. Das original dreht sich nicht leicht genug, die Magnete sind vermutlich zu stark. Das obere und das untere Endstück der Rolle sind original von CrunchLabs hier zu finden:…
The teeth on the right cam in our kit arrived damaged. Crunchlabs is sending a replacement part for free but I took this as an opportunity to practice replication design in fusion. Note this is the right cam only and it's not 100% perfect…
It sure is a bowl. Print in vase mod
Some stuff that can be used to upgrade the disc launcher creation in the Mark Rober build box.
Rubber bands not necessary to hold in the still plastic frames, so this is easier for swapping.
( relief sculpture )
This is a holder for the numerous scrunchies and hair bands that my wife has. She wanted some kind of easy organizer and liked this.
🐶💥 Colonel Crunchbones Leader of the Heavy Paw Battalion, Colonel Crunchbones is a bulldog so muscular that scientists still can’t explain how he fits through standard doorways. Dressed in a blue tactical suit that’s definitely one size…
Simple and quick print, now my daughter have somewere to put all her hair bands abd scrunchies! The parts have a 0.2 tolerance and a tight fit using material that does not shrink to much after cooling down. no glue should be needed. Made…
If you feed your guineapig vitakraft crunch stick treats, you would know that the “mount” that comes with them make them hang vertically in their cage. I'm sure you would also know that due to the configuration of the head of Guineapigs…
Just a quick scrunchie holder.
A simple modification of the original 3d printed propeller for the Crunchlabs Propeller Launcher Build Box created in an attempt to answer the question - 'Would it go higher with more blades?' The actual answer doesn't appear to be…
Replacements arms for the Boomerang car kit. These switch arms are originally made out of balsa wood and break really easily.
Made/Designed based on the existing syringe plunger out of the crunchlabs ‘Wet Bandit’ build box. The original, in this case, had been broken in an unfortunate accident while hurriedly running up stairs… Someone else may have been…
Modern style hex anti prism to hold rubber bands centered.
I AM LAZY! Import both into your slicer, and re-align the rebel logo to fit into the cutout. It currently is offset by a very small amount. I messed it up but this is a special edition so you can suffer along with me. Then, hide one,…
🎄🐶 Colonel Crunchbones – Christmas Edition Every December, Colonel Crunchbones hangs up his tactical blue uniform… and slips into the most intimidating Santa suit ever manufactured . A Santa who doesn’t say “Ho Ho Ho” but rather a deep,…
I needed a way to get hair accessories out of bathroom drawers and keep them away from the dogs, so I put together this modular hook system. It mounts cleanly to the inside of cabinet doors, walls, or wardrobes. The design is completely…
Two variations on the disc included in the Crunchlabs "Disc Launcher" build box. One is true to the injection molded version included in the box, complete with the inside curve of the disc made vertical to avoid the negative space that…
100x160mm sign, with picture of a frog and text “Whizzo Chocolates Crunchy Frog”, inspired by the Monty Python skit . Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with…
This is a spiky version of the flying disks in one of the crunch labs build boxes. Be careful, this is a US-Military grade weapon. Thanks so much!
I got inspired by magcians gimmic crunch by Calvin Sze https://www.printables.com/model/1372627-crunch-prank I made and it works.... except for one thing, it is not possible to make the cracking noise repeatedly during one session. Here…
My kids flicked so many coins the first day that the flicking edge got dented on one, and that led to fights about who had the "better" one. I don't have a glowforge so I recreated the shaped piece and printed it with PETG. Perhaps a PLA…
Modifying the Crunchlabs irturret for stepper motors NOTES: The plastic is too soft for the azimuth bracket, so it's increasingly sloppy.
A fidget toy key fob made by request for a friend. This one has the magnet pockets intentionally oversized so that the magnets move around in their pockets while fidgeting, making a kind of crunching sound as the top part is rotated.…
These are brackets to hold the Crunchlabs crunch box diploma. I do them with my son and wanted to mount his diplomas on the wall. Just print 2 of them for each diploma. I used Command Strips to mount them to the wall while holding the…
baseplate 75 x 75 mm height max. 140 mm radius of 50 mm photo: geeetech silver PLA in .2 mm height and 7% infill for less filament usage
use ABS or PLA
No supports necessary, its just a little guy :3
The original (yellow in the picture) was too tall. There was a too wide gap between the acrylic disc and the plywood so the air escaped. First I tried to re-create a better part, but it required support when printing and did not turn out…
The backplate of my body crunch's counter broke, so I made this replacement. It holds the counter in place, but does not cover the internal structure at all. It's functional but no aesthetic. It uses the same screws the counter comes…
We both know the discs in the box are getting lost in the house, now you can have even more of them lost in the house, and in different colors! Haha! They fly fast and true, maybe even better than the originals. Can easily be printed in…
Modifying the Crunchlabs irturret for stepper motors NOTES: The plastic is too soft for the azimuth bracket, so it's increasingly sloppy.
This model contains multiple STL files. At minimum, you should print the cactus sliced-top and cactus pot models. I also recommend printing the sliced-top model with fuzzy skin! It adds a nice aesthetic.
Replacements arms for the Boomerang car kit. These switch arms are originally made out of balsa wood and break really easily.
These are brackets to hold the Crunchlabs crunch box diploma. I do them with my son and wanted to mount his diplomas on the wall. Just print 2 of them for each diploma. I used Command Strips to mount them to the wall while holding the…
Simple and quick print, now my daughter have somewere to put all her hair bands abd scrunchies! The parts have a 0.2 tolerance and a tight fit using material that does not shrink to much after cooling down. no glue should be needed. Made…
Love this design? 💖 If you enjoy this aesthetic, please consider supporting my new project, KamiMarks ! While this design looks good here, if you want a printed one (that looks much better) , you can find them at KamiMarks. And it's not…
Love this design? 💖 If you enjoy this aesthetic, please consider supporting my new project, KamiMarks ! While this design looks good here, if you want a printed one (that looks much better) , you can find them at KamiMarks. And it's not…
podstavce nejsou stejné - mají rozdílnou velikost děr na vložení stojanu - tisknout v páru správné dvojice
