Liczymy pasujące modele…
(The links below are affiliate links. I may earn a commission at no extra cost to you, helping keep my work free and continuously improving my designs.) This case is meant for this Electronic Load:…
This project takes an Atorch DL24 Electronic Load module and makes some minor modifications to it and encloses it into a custom 3D printed enclosure to provide improved handling and board protection. The project also converts the DL24…
Atorch DL24 150W Electronic Load Case For the newer version that can be powered by a 5V USB-C power supply . The top cover can be installed without having to disassemble the heatsink with fan and re-paste the transistor - The top cover…
I bought an Atorch DL24 to do some load testing on the mess of USB cables I have. I think it will also come in handy for other projects. It's a pretty nice piece of equipment, but I'd much prefer to keep my mitts off the PCBA. So this…
This is the housing for DL2MAN uSDX Sandwich , so users that already have an existing Sandwich can print an easy housing. It requires to remove the electrolytic capacitor below OLED, replace it with a small tantalum capacitor and solder…
Materials 4x M3x3 heat set inserts (short) 4x M3x10 socket head screws Print the LED light guide with transparent PETG. You can find a nice guide here: https://www.printables.com/model/15310-how-to-print-glass Preparation Put M3 heat set…
You can take all the rest of the housing components from the original design.
Complete case for the Atorch DL24 battery tester. Unlike other cases I found, this covers the heatsink and fan. This may not work with some larger fans out there, so your mileage may vary. I'm personally using it with an 80mm Noctua fan…
Remix of @Wiseone's DL24 case Switched to socket head screws. Cutout for speaker added Added nonbattery powered version
A case for the Atorch DL24 with external display (DL24M). Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a small cut of any order you fulfil using these links (at no…
Materials 4x M3x3 heat set inserts (short) 4x M3x10 or M3x12 socket head screws Optional : Print LED light pipe in transparent PETG (or skip altogether) Preparation Insert M3 heat set inserts, being careful of posts with cut profiles…
Printed with PET-G filament.
Modification: Fixing the device to the board Led diffuser for BT LED version
An enclosure for the DL24M electronic load. Powered with a 12V Barrel or 12V USB C PD Port. To mount the board in to the enclosure you have to remove the green screw terminal housing or edit the cad file. All screws are mounted with brass…
A case for the Atorch DL24 with external display (DL24M). Encoder connection and button see link: https://vae-tech.forumactif.org/t254-dl24m-charge-active-testeur-de-batterie#2266
Atorch DL24 Electronic Upgrated Top The original top cover didn't fit my DL24. The incompatible parts were the buzzer, the Type-C port on the top, and the charging port. I redesigned the cover for the updated DL24 and updated the top…
I just created case for battery box, which fits existing case for electronic load - Atorch DL24 - https://www.printables.com/cs/model/405292-atorch-dl24-electronic-load-case. I could not find anything already existing so it can be…
I wanted to store the Atorch DL24 Electronic Load module plus the accessory that I ordered with it away till needed, I did have everything saved in a container but still, it was not what I wanted, so I searched for something that will…
Usar las instrucciones de la versión original de mi remix.
Printed with PET-G filament.
The DL24P is a fantastic electronic load tester — but the exposed fan always worried me during operation. So I designed a clip-on fan grill that snaps securely onto the housing without screws. It prints perfectly in PETG at 0.2 mm layer…
At the request of a friend I looked at the design of this case. Brilliant as it was when he described the power handling I felt that the addition of air vents below the PCB would be a good move, and therefore that some feet would be…
The Feedpoint Part is modified to be not so pointy (because pointy is scary ;-). Also I reduced the drill size of the inner holes, so you can use a cable tie (or knot) for strain relief. The optional cap can be used to close/protect the…
Just snaps on over the springs for easy add and removal.
I absolutely adore my 2M Moxon that DL2MAN designed and I really wanted to try the 70cm design but my printer would not print his 70cm model as the build plate was just a tad too small. Therefore I decided to built a scaled down version.…
Key differences of the design: - better mount points for banana 4mm and DC 55 power sockets - mounting for DL24B-XSP16 Test Board - a switch to disconnect Test Board and enable true 4 wires connection The housing was made as compact as…
A holder for the LCD and the power adapter that makes the atorch DL24M a lot nicer to work with and also easier to move around. It's a very easy print with no supports and doesn't block the airflow nor limiting the cooling capabilities.…
ENGLISH -------------- I wanted to make this electronic load autonomous, rechargeable, more practical to use and equipped with a small box to store the accessories. I also wanted to be able to move it easily and store it vertically to…
Extra Fox did a fantastic job designing the case. I like it the best among Atorch DL24 cases I found. I ordered the set with Battery box (battery testing board) so Riko's remix was helpful, but I didn't like how it cut out too much,…
I couldn't find any cases for this device online. The case consists of 3 quick-assembly parts. The case provides the ability to connect additional modules to the load. Just remove the 0.6 mm thick walls in the right places. The case…
Redukce pro uchycení chladiče se základnou 58x60mm na 75x75mm do Atorch DL24. S tímto pasivním chladičem se dá provozovat s i bez ventilátoru. Uchycení přez šroubovici průměru 3mm s maticí a podložkou na jednom konci, na druhém konci…
Gehäuse für Batterie Tester DL24M mit mehr Luftdurchsatz für eine bessere Kühlung Benötigt werden 4x M3x25 Schrauben Gedruckt in 3 Farben Bambu Lab X1C AMS
I modified the battery-slider from DL2MAN with an integrated space for a smal USB-C charging board for 3S batteries.
FixDaily did an excellent job, as the case was a perfect fit! However I thought it needed a fan shroud to keep from breaking a blade on my messy workbench. I designed this in Fusion. It is a friction fit on the circular diameter of the…
Sides without changes and can be found in origin model Changes: Decrease button hole to 16 mm Make case wider by 3 mm Add places for screw in the center(top and bottom) Rounded hole on the back
Modified parts for smooth insertion of the battery measurement plate
Atorch DL24MP MyVersion 300W DIY
modified to my (assuming older) model of Atorch DL24. Top cover modified to fit embedded connectors and added 3D printed fan grill with friction fit. M3x14mm seft tapping screws used and rubber feet.
Parts to mount an Atorch DL24M on a vertical surface with minimal material use. I wanted to quickly print mounts to hang my capacity testers on the wall to save space and speed up the battery swapping. Print "DL24M mounting piece.stl" 2…
Housing for the DL24M unloader, available on Ali or Bang. https://pl.aliexpress.com/item/1005003426244725.html?gatewayAdapt=glo2pol Base made of 16mm laminated board. For the 2-module version 300W.
Cut a rectangle measuring 52x40mm with rounded corners (R2.5) out of Plexiglas (the transparent cover of a compact disk) To print the inscription in a different color, you need to split this model into parts and select a second plastic in…
What? I've created a case for a FAAC DL2 868-SLH remote (in my case, used for a garage/car-park door), as mine broke but the electronics were still fine (and a new one + programming cost 40€). I only found this one for this specific…
Allows mounting of 2 meter moxon antenna by DL2MAN direct to a painters pole or broom handle.
Needed another new case for this electronic load. Note: There are tons of variants on the market available. Not all fit!! THIS MODEL FITS ATorch DL24 BW150 with WiFi and BLE option and with CD (Charge-Discharge option). Module ATORCH…
I noticed that non of the models out in the wild where accurate to the latest version I purchased on 2026-04-05, so I carefully measured and modeled the PCB I received and I am willing to attest it's accuracy to within 0.2mm of the real…
Atorch DL24 150W Electronic Load Case Added ventilation holes to the bottom plate Removed the protrusion near the load
Changes the 4.6 mm heat-insert holes to 4.0 mm, based on a remix that adds air vents.
I wanted to join the 2m and 70cm segments together so that I could hold the antenna like a dual band handheld antenna. I cut the chamfer off of the pole adapter in my slicer and glued it onto another pole adapter so to make it long enough…
Decided to place the spreaders and tube housing on one bed. Made the tube holders longer so you have less strain on your prints. PETG will work best for this. Hope you have fun and original design goes to DL2MAN.
This is a Gridfinity bin for an ATORCH DL24 set. It’s specifically designed for this case , and it also includes cutouts for the battery box, the test adapter board, the temperature probe, and the alligator clips. It’s a space-saving…
I wanted a quick and dirty way to mount my A-Torch tester on the wall. I had already printed a great case for it. Firstly tried double sided tape but the heat of the unit softened the double sided tape and made it fall off. I used 6G…
EN: Support for dl24 PCB. CZ: držák pro dl24 DPS.
Diese Halteplatte ist im Moment von Weidmüller selbst nicht lieferbar. Achtung! Bevor diese Platte ausgdruckt wird, ist darauf zu achten, dass das richtige Filament/Material gewählt wird. Im Original ist die Platte aus PA/Nylon gefertigt.
You can leave the screwdriver straight on in "pistol" position. In one of three orienations: left, right, center. Grab the "socket_stub" file if you want a different mounting. Top two openConnect slots are locking! It was also an exercise…
This is a light cover that was designed to roughly match the dimensions of the Denali DL2 floodlight (P/N DNL.DL2.050). The model is intended to print with TPU, the source FreeCAD file is available if you need to make modifications. The…
I couldn't find any cases for this device online. The case consists of 3 quick-assembly parts. The case provides the ability to connect additional modules to the load. Just remove the 0.6 mm thick walls in the right places. The case…
Allows mounting of 2 meter moxon antenna by DL2MAN direct to a painters pole or broom handle.
modified to my (assuming older) model of Atorch DL24. Top cover modified to fit embedded connectors and added 3D printed fan grill with friction fit. M3x14mm seft tapping screws used and rubber feet.
I wanted a quick and dirty way to mount my A-Torch tester on the wall. I had already printed a great case for it. Firstly tried double sided tape but the heat of the unit softened the double sided tape and made it fall off. I used 6G…
Changes the 4.6 mm heat-insert holes to 4.0 mm, based on a remix that adds air vents.
This is a Gridfinity bin for an ATORCH DL24 set. It’s specifically designed for this case , and it also includes cutouts for the battery box, the test adapter board, the temperature probe, and the alligator clips. It’s a space-saving…
I noticed that non of the models out in the wild where accurate to the latest version I purchased on 2026-04-05, so I carefully measured and modeled the PCB I received and I am willing to attest it's accuracy to within 0.2mm of the real…
FixDaily did an excellent job, as the case was a perfect fit! However I thought it needed a fan shroud to keep from breaking a blade on my messy workbench. I designed this in Fusion. It is a friction fit on the circular diameter of the…
(The links below are affiliate links. I may earn a commission at no extra cost to you, helping keep my work free and continuously improving my designs.) This case is meant for this Electronic Load:…
EN After many years of using this lamp, bottom plastic cover for powering light twisted and broke. This twist was caused by warm of halogen bulb, which produce much more warm, than LED bulb. So after my halogen bulb burst, I replace it…
