Wyniki wyszukiwania: drome

Sortowanie

209 modeli

Mass Effect Andromeda Initiative Logo Magnet

You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…

Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu

Pobrania
77
Polubienia
26
Ocena
5
P
Printablesboom23

Prusa Core One Hydrometer/Humidity Meter Holder

This is a simple hydrometer, humidity meter, holder using three 8x3mm magnets. You can replace the hydrometer battery without removing if from the holder. You can use any material to print it. I used PETG. Hydrometer:…

Wydruk około 0,41 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
31
Polubienia
4
Ocena
5
P
Printablesmscalora

ROCK UR SOCKS - World Down Syndrome Day Headband

My daughters are doing a booth at the high school for World Down Syndrome Day and asked for a “Rock UR Socks” headband so I created this model. It is multi color and multi-part, the crazy socks are glued on after printing. I used PLA, the…

Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu

Pobrania
30
Polubienia
3
Ocena
0
P
PrintablesLongracks Labs

Dry Pods with Hydrometer + AMS desicant trays for Bambu Lab AMS

Combined the ams desiccant tray and the Dry Pod with hydrometer models into a single print. A day after setting this up with fresh desiccant beads ( https://www.amazon.com/dp/B013L31PQ0?psc=1&ref=ppx_yo2ov_dt_b_product_details ) the…

Pobrania
7118
Polubienia
585
Ocena
4,96
P
PrintablesUnchainedAi

Silica Desiccant Dry box for Bambu Lab AMS - Airways for Hydrometer and Resized Lid

After printing both versions of the center case that supported the addition of the hydrometer, I realized that while the second case looked better aesthetically it did not function well due to the lack of airflow around the unit. Remixed…

Pobrania
3173
Polubienia
369
Ocena
4,88
P
Printablesshane.t

In Spool Desiccant (SIlica Gel) Container with Hydrometer (or without) NO SUPPORTS REMIX

UPDATE 7/9/2020: Thanks for the comments here are the printing instructions - Print the containers close end down. Non-Hydrometer lid the closed side down. The hydrometer lid print with grip side up. UPDATE 7/1/2020: -Added…

Pobrania
878
Polubienia
138
Ocena
4,88
P
PrintablesThomas Lord

Bambu Labs P1P\P1S\X1C Magnetic Hydrometer Mount

This is a magnetic hydrometer mount for enclosed Bambu Lab printers. It was designed for a 40mm hydrometer and uses 2 6x3 magnets. The magnets should press fit in (with some elbow grease) and it mounts to the rails on the sides of the…

Pobrania
828
Polubienia
180
Ocena
5
P
PrintablesDJ

Andromeda Ascendant in XXXL Format (LxHxW: 50x21x25cm) (Gene Roddenberry) with stand

I have revised the model of “morenostefanuto” to be 3D-printable. Need to mention that I am not a “Andromeda Fan” or “Trekki” but this Andromeda Ascendant model is really huge and looks really fantastic. The dimensions are: length: ca. 50…

Pobrania
744
Polubienia
56
Ocena
0
P
Printablespiegolf

Round Hydrometer/Thermometer Holder

Update 23/05/26: added mirrored version to fix battery hole issue Update 11/12/24: added cutout for battery cover to make replacing the battery easier, model now has built in supports that should be removed before assembly Print Settings:…

Pobrania
556
Polubienia
55
Ocena
5
P
PrintablesCherryWelding

Altered air sampling desiccant hydrometer basket

-So far testing has not shown a significant difference in sample readings, although not enough sample data has been collected. Will edit as it goes- After noticing where the hydrometer sources the air samples (sides and back), I wanted to…

Pobrania
531
Polubienia
50
Ocena
4,83
P
PrintablesHextra

Andromeda's Edge Deluxe insert

I love this game. Top to bottom, from production quality to gameplay mechanisms to art, Andromeda's Edge is simply incredible. The only thing standing between me and constant replays? The setup and teardown. Edit : I was asked on discord…

Pobrania
424
Polubienia
74
Ocena
5
P
PrintablesWallesurf

Velodrome diecast track, hotwheels

Diecast track velodrome, might not be the most important upload... ;) but it saved a boring day at home! Fits Lidl "Playtive" tracks, but also compatible with other brands. Print Settings Printer Brand: Creality Printer: Ender 3 Pro…

Pobrania
247
Polubienia
61
Ocena
5
P
Printablesezeackermann

Silica gel containers with Hydrometer

Remix of the original Drenth Engineering model. You can see it by clicking here . Increased to 70mm x 70mm x 56mm for the case, and 70mm x 70mm x 11.2mm for the case lid. The hole for the hydrometer is for the rectangular model, 45mm x…

Pobrania
219
Polubienia
31
Ocena
5
P
PrintablesAlber

Miami International Autodrome

This is a faithful reproduction of the Miami International Autodrome. Its dimensions are 20cm long, 8cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple model, it…

Pobrania
219
Polubienia
14
Ocena
5
P
PrintablesJacob

Filament Dry Box - Drilling Guide and Hydrometer Mount

Updates the drilling guide to include holes for the 10mm filament holes and includes an update hydrometer mount.

Pobrania
216
Polubienia
31
Ocena
5
P
PrintablesYurtle Ahern

Round Hydrometer Holder for Ultimate Cereal Container

VERSION 1.1 - 29/05/2025 - Fixed a small lip on the model that might cause printing issues. Remix of the The Ultimate Cereal Container Filament Drybox designed found here…

Pobrania
215
Polubienia
33
Ocena
5
P
PrintablesJay

Python AMS Actively Heated Enclosure: Hydrometer Holder

Reusing the PolyDryer's Hydrometer to monitor the humidity in my enclosure.

Pobrania
213
Polubienia
26
Ocena
5
P
PrintablesHammersh
Pobrania
195
Polubienia
24
Ocena
4,86
P
Printableschrisgeb

Magnetic Thermometer Hydrometer Mount

Magnetic thermometer hydrometer mount that can be used to mount in a 3d printer enclosure, or dry box for filament. Thermometer dimensions Front dimensions 48mm x 28.5mm Rear dimensions 44.5mm x 26mm Can use 8mm circular magnets or 20mm x…

Pobrania
192
Polubienia
32
Ocena
4,5
P
PrintablesKutilman Yuri

Stand for Chinese Hydrometer or Thermometer

Designed and tested this simple holder. Uses about 6g of filament. 2 versions available, 85 and 80 degrees tilt. 85 degrees = good for higher placement of the meter (e.g. on the closet/wardrobe, etc.) 80 degrees = good for lower placement…

Pobrania
174
Polubienia
33
Ocena
0
P
PrintablesDragonArtist15

Thalassodromeus Figurine

Scientifically accurate model of a thalassodromeus. The model features high-poly feather and skin texturing along the model. I created two variants of the model, standing and posed. I recommend printing it at a finer layer height or with…

Pobrania
173
Polubienia
36
Ocena
5
P
PrintablesChristian Krug

Constellation Andromeda Display Stand

I have constructed a stand for a Constellation Andromeda. All you need is a M3 melting nut in the model and a M3x10 screw for the stand itself. The font you can then color as you wish. Please share yor Make if you print it! :) o7

Pobrania
136
Polubienia
10
Ocena
0
P
Printablesklay

Andromeda's Edge Module Deck Holder

The module tray that comes with the deluxe version of Andromeda's Edge can't hold all the sleeved module cards. These deck holders are designed to fit the module cards sleeved with the sleeves that come with the All-in pledge and be…

Pobrania
135
Polubienia
13
Ocena
5
P
PrintablesGezz

Core One hydrometer / temperature gauge case

Core One hydrometer / temperature gauge - easy print (PETG minimum) and fit with M3 x 16 bolt - M3 hex nut - Magnets 10mmx 3mm or 6mm x 2.5mm - hydrometer available at Amazon (search iplusmile 3 Pack Mini Hygrometer Thermometer , Celsius…

Pobrania
135
Polubienia
28
Ocena
4,88
P
PrintablesRichard D

Overlays for Andromeda's Edge

A player board overlay for Andromeda's Edge. 3mm thick. Two variations - one with modules on the left, the other with them on the right (unfortunately you can't just flip the overlay to the other side). Sized for a 250mm bed printer

Pobrania
133
Polubienia
14
Ocena
4,5
P
PrintablesCAD_Dude

Universal Spool Container Hydrometer Mount

Here is mount for round hydrometer to be used with my Universal Spool Container

Pobrania
128
Polubienia
18
Ocena
5
P
PrintablesModel Magic

Videodrome - Nikki Brand 1983

Videodrome - Nikki Brand (Debbie Harry) 1983 3D printable model.

Pobrania
125
Polubienia
18
Ocena
0
P
PrintablesThe Alchemist

orthodrome templates

metric orthodrome drawing templates 12mm-1000mm radius, one has the measurements of the radius of each circle on it other does not.

Pobrania
124
Polubienia
31
Ocena
5

Trek Obelisk TOS Ep The Paradise Syndrome - Now includes alien symbols

I am Kerok! Model of the asteroid deflector seen in StarTrek TOS - "Paradise Syndrome". This model was generated with OpenScad and the script is provided. Use the customizer to select the output model, All, Plates, Base or Obelisk. This…

Pobrania
124
Polubienia
24
Ocena
4,5
P
PrintablesMoodmask1

Saint Seiya Andromeda Bust

Inspired by the kights of zodiac manga

Pobrania
114
Polubienia
17
Ocena
0
P
PrintablesModel Magic

Farm Animals - Exotic - Dromedary Camel

Farm Animals - Exotic - Dromedary Camel 3D printable model.

Pobrania
113
Polubienia
13
Ocena
0

Dinosaur Island Meeple - Albertadromeus

A meeple of Albertadromeus dinnosaur for the board game Dinosaur Island. Print Settings Printer Brand: Printrbot Printer: Play Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category: Games

Pobrania
112
Polubienia
26
Ocena
5
P
PrintablesMaxymeanderings

The Incredibles: Syndrome Costume/Cosplay

These are Syndrome's Gauntlets from The Incredibles movie. I showcased them in my build video on YT. Both gauntlets can be printed in pretty much any filament you would like. I used a white PLA in the video. In order to actually wear…

Pobrania
112
Polubienia
31
Ocena
0
P
PrintablesMaraktos

Dry Pods for AMS+ Hydrometer hole

I find it ineffective to put the hygrometer directly in the silica gel capsule. What should the meter show then? When it is directly in the absorption component. As a jury, we created a remix where a hole is created for better air flow…

Pobrania
107
Polubienia
10
Ocena
5
P
Printablestcomx

Filament Cereal Dry Box Hydrometer Plug (Mount)

I looked around for a hydrometer mount plug for the cereal boxes used, there were a few, but in end decided just to design my own. These ‘plugs’ allow the round hydrometer to be mounted. The hydrometer is a tight fit, but not too tight.…

Pobrania
106
Polubienia
10
Ocena
5
P
Printablesdenis.gomez

Bambu LAB P1P / P1S - External Hydrometer with temperature

Just an housing for an hydrometerfor P1P / P1S serie. You have to plug it into the hole. For hydrometer 44/45mm https://www.amazon.fr/dp/B088NN6WY6?psc=1&ref=ppx_yo2ov_dt_b_product_details

Pobrania
106
Polubienia
24
Ocena
5
P
PrintablesTaro Hayashi

Round Hydrometer Mod for Filament Drybox Inomata-K Mk2

Round Hydrometer Mod for Filament Drybox Inomata-K Mk2

Pobrania
99
Polubienia
7
Ocena
0
P
PrintablesCranK357

Hydrometer Halter Ikea Metod

Da ich Gefallen daran gefunden habe Modelle für meinen "Ikea Metod Enclusor" zu erstellen, hier meine nächste Kreation! Der Halter ist in der Lage 41mm Hydrometer von z.b. Amazon, eBay und co aufzunehmen. Wenn du auch einen Ikea Metod…

Pobrania
99
Polubienia
19
Ocena
5
P
PrintablesRioseras007

Andromeda - Laurel Gand

Laurel Gand es una superheroína que aparece en DC Comics, principalmente como miembro de la Legión de Superhéroes en los siglos 30 y 31 bajo el nombre de Andrómeda. Fue creada como reemplazo de Supergirl, quien murió en Crisis en Tierras…

Pobrania
93
Polubienia
13
Ocena
0
P
Printablesoverflo

Loxodrome lamp

A loxodrome is a line on a sphere. For example a meridian on a globe. But it could be any path that follows surface. There are more loxodrome designs here and that inspired me to fire up my openscad and make a design myself for our…

Pobrania
93
Polubienia
14
Ocena
0
P
PrintablesLost

Dyna Dry Box +10MM with Hydrometer hole

I used these for the hole: https://www.amazon.nl/-/en/Thermometer-Hygrometer-Measuring-Temperature-Refrigerator/dp/B07JDSHD4Z

Pobrania
91
Polubienia
4
Ocena
0
P
Printablessabin

Formula 1 Circuit Miami International Autodrome

Formula 1 Circuit Miami International Autodrome with elevation and DRS detection zones. Can be printed as it is or with 120% size; 0.4mm nozzle.

Pobrania
89
Polubienia
7
Ocena
0
P
PrintablesDisttrack3D

Esun ebox hydrometer holder

Just a hydrometer holder for esun ebox. Print Settings Printer Brand: Anet Printer: E10 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 30% Filament: TIANSE TPU RED Notes: I used TianseTPU, with tree supports. Print Speed of…

Pobrania
88
Polubienia
23
Ocena
0
P
Printablesgrumpusbumpus

Technodrome

I wanted a Technodrome turn marker for my TMNT-themed Blood Bowl team. After not finding any free 3D models for the Technodrome online, I decided to make one! I used Tinkercad exclusively and worked on the model for a few minutes here and…

Pobrania
84
Polubienia
13
Ocena
0
P
Printablesthebigthn

Cereal Box Filament roller with hydrometer

I was getting tired of printing out little boxes and capsules for desiccant, so I wanted a filament roller without any of that. Then I could use these cheap sachet mesh bags to hold desiccant. A lot easier to fit these in my dryer:…

Pobrania
83
Polubienia
21
Ocena
5
P
PrintablesModel Magic

Sci Fi Movies - The Andromeda Strain - 1971

Sci Fi Movies - The Andromeda Strain - 1971 3D printable model.

Pobrania
83
Polubienia
20
Ocena
0
P
PrintablesMortalWombat

Hydrometer stand for Sterlite 20qt gasket box

The Sterlite 20qt gasket box is the best bang for the buck for filament dry storage. I wanted to be able to see when the humidity was getting high and the desiccant needed recharging, so I bought a 12-pack of these humidistats and…

Pobrania
82
Polubienia
8
Ocena
4
P
PrintablesFiremanmoe

Python AMS Actively Heated Enclosure: Hydrometer Holder Lock

Using @Jay_27612 PolyDryer's Hydrometer to monitor the humidity in my enclosure & needed the back to lock it on...

Pobrania
80
Polubienia
10
Ocena
5
P
Printablesrfengr_1

Desiccant Spool Tumbler with Hydrometer insert

I liked and printed other models like: https://www.printables.com/model/106687-silica-gel-desiccant-containers But they don't fit my filament spools. So I spliced the lid from Michal's model into this one from chuyskywalker . I printed…

Pobrania
80
Polubienia
17
Ocena
5

Stade Orange Vélodrome - Marseille

Le stade Orange Vélodrome de Marseille - OM Ce modèle est gratuit pour un usage personnel. Si vous aimez mon travail et souhaitez me soutenir, vous pouvez m'offrir un café via le lien sur mon profil ou directement avec PayPal :…

Pobrania
80
Polubienia
3
Ocena
0
P
PrintablesHT Hammer

Disney Infinity Syndrome

Disney Infinity Syndrome

Pobrania
72
Polubienia
16
Ocena
0
P
PrintablesJsn0327
Pobrania
68
Polubienia
13
Ocena
0
P
Printablesclickbangdead

Spool center desiccant holder with hydrometer mount

Simple desiccant holder that can also fit a hydrometer. Cap is built in two sections, the main cap ring and the bottom snap-in “floor” to the cap. This is so that everything can be printed with no supports. The bottom desiccant cage…

Pobrania
66
Polubienia
10
Ocena
3,5
P
PrintablesHellboy383

Prusament Spool Desiccant (Silica Gel) Container with Hydrometer (or without) Lid Only REMIX

I have remixed the lids by slavearm https://www.thingiverse.com/thing:4508179 as the desiccant containers would fall into the middle of the spool if you were not holding them in the vertical position Additionally I made the non hydrometer…

Pobrania
65
Polubienia
8
Ocena
5
P
Printableskernelpanic

Simple hydrometer wall mount

Just another simple hydrometer thing.

Pobrania
64
Polubienia
8
Ocena
5
P

Modular Filament Drawer System Faceplate with Rectangle Hydrometer

Update: Uploaded V2, had some issues it the acrylic cracking on hydrometer insertion, created small relief for tabs on hydrometer. This is the faceplate for RobertCowanDIY's Modular Filament Drawer System with room for the rectangle…

Pobrania
63
Polubienia
12
Ocena
0
P
PrintablesRoman Kiprin

AMS Dryer Pod with Hydrometer (ZigBee)

To be precise, I took the idea of making a DryerPod and the external dimensions from Bambu Lab AMS Dryer pods w/snap-fit lids ; however, I made the model myself. The main difference with many other DryerPods (like this, for example, AMS…

Pobrania
62
Polubienia
3
Ocena
0
P
PrintablesVelocityOS

Hikari 103 Andromeda Remix

This is still a work in progress!!! HAS NOT BEEN TESTED BEFORE!!! I wanted the Hikari 103 BCAR to have a different look for its shroud. This will not fit on the original BCAR as it is too wide, I have provided a friction fit mounting…

Pobrania
59
Polubienia
10
Ocena
0
P
PrintablesVenterus

Ace Pro Hydrometer Stand / Krontaler

Schichthöhe 0,16mm Fülldichte 15% Füllmuster Bienenwabe Da ich mir ein Hydrometer zugelegt habe, beim Ace Pro es aber keine möglichkeit gab eines zu verbauen, habe ich kurzerhand mal eben einen Stand dafür erstellt. Der Stand ist zum…

Pobrania
58
Polubienia
10
Ocena
0
P
Printablesmatthew stewart

Magnetic Hydrometer Holder V2

Magnetic Hydrometer Holder for use with 10x3 magnets

Pobrania
56
Polubienia
8
Ocena
5
P
PrintablesCristian Ciotta

Vaso Andromeda

Questo vaso, realizzato in PLA tramite stampa 3D, presenta una forma slanciata con un’elegante torsione a spirale che ne esalta la verticalità. Il design è stato modellato con precisione su Rhinoceros , permettendo di ottenere superfici…

Pobrania
55
Polubienia
7
Ocena
0
P
PrintablesInducatvius

Arc Hydrometer/temp sensor Door

Simply unscrew the door knob. Install the sensor (https://www.amazon.nl/dp/B07JW7K2M5?ref=ppx_yo2ov_dt_b_product_details&th=1) and reinstall the knob.

Pobrania
53
Polubienia
5
Ocena
0
P
Printables3dgeprintnl

Desert Dromedary

This cute little dromedary sits calmly with its single hump and wavy fur. Its gentle face and cozy pose make it a sweet desert companion, perfect for display. Fun to paint in sandy browns and tans for a natural look, or try playful…

Pobrania
51
Polubienia
10
Ocena
5
P
PrintablesCADBOB

Hydrometer Standfuß

Das ist der Standard-Hydrometer, den es bei Aliexpress oder Amazon gibt. Gedruckt mit Öffnung auf der Druckplatte: 0.1 Layer height für schöne Layer ansonsten geht auch 0.2 no Supports no Brim über einen Like wenn euch das Design gefällt,…

Pobrania
49
Polubienia
4
Ocena
0
P
Printablesideat0m

Freddie: Adorable Dromedary – CARTOON EDITION (noAMS)

🐫 Freddie: Adorable Dromedary – CARTOON EDITION (noAMS) Meet Freddie , a stylized "chibi" version of the legendary desert wanderer! This adorable one-humped camel (Dromedary) figurine is designed in a modern minimalist style, featuring…

Pobrania
49
Polubienia
25
Ocena
0
P
PrintablesNikosSprocket

Filament Dry Box Dispenser with a build-in Hydrometer

This is a variation of a 1kg single filament spool box that includes a silica gel compartment and hydrometer. Main design consideration where: Airtight cereal box. Holds in a built-in container about 100 cc of Silica gel beads. 2x…

Pobrania
48
Polubienia
13
Ocena
0
P
Printables1 sae

Desiccant and Hydrometer Holder for Praki Cereal Containers

****Just a quick FYI I just bought some more hydrometers from Amazon that looked identical to the ones I designed it around. These have some ridges that make my opening slightly too small and may split the top off on the layer line. I was…

Pobrania
48
Polubienia
8
Ocena
4
P
PrintablesModel Magic

Videodrome - "Long Live the New Flesh!" - 1983

Videodrome - "Long Live the New Flesh!" - 1983 3D printable model.

Pobrania
48
Polubienia
14
Ocena
0
P
PrintablesLukaS

Holder for hidrometer and termometer

If you need a Thermometer and Hydrometer on your printers enclosure and filament drybox as I did : here is the link to the hydrometer on aliexpress…

Pobrania
48
Polubienia
4
Ocena
5
P
PrintablesTim Petersen

Simple Hydrometer Stand

Made for your classic 41mm Hydrometer you get all over the Internet. Yours should fit Simply insert the Hydrometer and rotate until it is in there Straight and secure :)

Pobrania
47
Polubienia
5
Ocena
5
P
PrintablesAlex Vikingo

Bambu Lab Hydrometer with AA Battery

Test model for hydrometer with AA battery power mode, snaps in place behind toolhead next to poop waste

Pobrania
46
Polubienia
6
Ocena
0
P
PrintablesTheWB

Dyna Dry Box / Filament Box 4L w. Round/Square Hydrometer & 50g bagged desiccant

I loved the concept of the Dyna Dry Box using the 4L Cereal Boxes but couldn't find the perfect combination of hydrometer support and space for desiccant bags. Mario Dittrich's fit my need the best as his move to wheels instead of the…

Pobrania
44
Polubienia
5
Ocena
5
P
PrintablesJlainton

Ziplock Drybag Spool Hydrometer Center Holder

Building on a design that I found from Richrap in thingiverse, I tweaked it so it was longer, and a bit larger to get rid of some play that I had in mine. Overall I think it turned out great, and I printed a good half dozen of them to put…

Pobrania
44
Polubienia
9
Ocena
0
P
PrintablesPapaBuffalo

Hydrometer Holders

Description: I encountered a problem after purchasing a vacuum sealing kit for the filament spools of colors that I rarely used – my hydrometers kept having their air inlet vents covered (and sealed) by the vacuum sealed pouch. I made…

Pobrania
44
Polubienia
5
Ocena
0
P
PrintablesAmeen Pirasteh

Andromeda's edge deluxe remix

@Hextra_355848 made a great deluxe all in insert for andromedas edge. In order to save filament I wanted to see if I could avoid printing the bottom section of his insert and use the storage that comes in the box for the raiders and…

Pobrania
43
Polubienia
8
Ocena
0
P
PrintablesModel Magic

Videodrome - The TV Kiss - 1983

Videodrome - The TV Kiss - 1983 3D printable model.

Pobrania
43
Polubienia
15
Ocena
0
P
PrintablesAeolus Design

Andromeda 1 Modular Vambrace

STILL A WORK IN PROGRESS Introducing Andromeda, the modular vambrace that is revolutionizing the world of customizable, 3D printed accessories. Andromeda is a DIY project that empowers users to design and create their own unique vambrace,…

Pobrania
43
Polubienia
2
Ocena
0
P
PrintablesINFX_TryHard

Dravet Syndrome Earrings

I designed these earrings as either a logo/earring design. If you want to make it an earring, scale the z to around 2mm tall. I wanted to help support awareness towards the cause. You will need to scale overall to the size desired.…

Pobrania
42
Polubienia
7
Ocena
0
P
PrintablesJC_Hood3

Snapmaker U1 PopCap Hydrometer Mount

Hygrometer mount for the Snapmaker U1 using the existing holes in the BIQU PopCap. Parts: 2x standard Voron-style M3x4x5 heat set inserts 2x M3x10mm socket head screws 2x M3 washers 1x Mini Hygrometer Insert heat set inserts from the…

Pobrania
40
Polubienia
12
Ocena
5
P
Printableslanwen

Universal Spool Container Square Hydrometer Mount

This is a holder for squared hydrometer like this one: https://amzn.eu/d/hNhtYc6 Uses around 4g of PLA

Pobrania
40
Polubienia
5
Ocena
0
P
PrintablesBeeFarm

Isolated Hydrometer Lid for Silica Gel Container

After finding a nice Silica Gel container to make I wanted to add a hydrometer that was isolated from the gel

Pobrania
40
Polubienia
6
Ocena
0
P
PrintablesOndřej

Bambu Lab AMS silica box for Xiaomi hydrometer with handle

The model from the author in the first link has been modified to be lower (same height as the boxes from the second author , comparison of heights in the third picture) to allow the cap with holder to be mounted on the top without the…

Pobrania
38
Polubienia
2
Ocena
0
P
PrintablesMykolas Šnioka

Hydrometer hanger

Hydrometer and measuring cylinder storage for honeycomb wall. Might not be universal. Measuring cylinder diameter 35mm, hydrometer 17mm. Install with basic empty inserts.

Pobrania
37
Polubienia
12
Ocena
5
P
PrintablesHologos

Magnetic hydrometer holder (Bambu Lab and any other printer with metal frame)

Simple holder for hydrometer for metal frame printer such as Bambu Lab P1S, P1P, X1, X1C, etc. If you are missing a variant for your magnets, write me a message and I'll add the one you need. Print Settings Material: PETG / ASA / ABS (or…

Pobrania
37
Polubienia
1
Ocena
0
P
PrintablesMarco Maker

Hydrometer Mount

A universal holder for a hydrometer with magnetic attachment. With 12 recesses, 6 mounting positions are possible. 2x 5mm magnets are mounted on the top. (However, one is probably sufficient) The dimensions can be found in the attached…

Pobrania
37
Polubienia
6
Ocena
0
P
PrintablesAppyLuke

Mini ITX server rack front panel hydrometer mod

Print as described in the original - but add a new modifier around the hydrometer hole so that you can have a top and bottom shell. The 3mf file has the modifiers pre-made if you don't want to do your own.

Pobrania
36
Polubienia
12
Ocena
0
P
PrintablesKamil

Hydrometr s teploměrem kulatý pro zadní stěnu Core one

V šeru a za tmy jsem neviděl na přední teploměr a tak jsem chtěl využít vnitřního osvětlení a osadit hydrometr na zadní stěnu Core One vynucené podpěry na magnety a vnitřní horní kruh magnety 6x3 mm 4 ks

Pobrania
35
Polubienia
7
Ocena
5
P
PrintablesJesse Willson

Double Hydrometer / alcometer holder for multiboard

Double hydrometer or alcometer holders for multiboard. Each slot has an embedded stainless steel washer near the bottom and another stainless steel washer (glued in place). Pause at layer 15 to add the washer Washer size: 25mm Diameter…

Pobrania
35
Polubienia
2
Ocena
0

Advent Calendar no.7: Vectidromeus

Heterodontosaur from the Isle of Wight described in 2023.

Pobrania
34
Polubienia
9
Ocena
0
P
PrintablesByer

Silica Box with Hydrometer Mount

This was inspired from making my own dry box. I made holes in the base and lid to melt in EZ Lock brass thread. The hydrometer mount was designed from another designer and unfortunately cant find the name. Will update when confirmed. I've…

Pobrania
34
Polubienia
4
Ocena
0
P
Printablespizzai69

SOVOL SH01 dryer - square hydrometer bracket

Hi, I designed a bracket to hold my square 45x45mm hydrometer in my SOVOL SH01 filament dryer.Simple and effective. No additional hardware needed. No support needed. 13/01/2026: made V2 and V3 because I found that the hydrometer could…

Pobrania
31
Polubienia
4
Ocena
5
P
PrintablesDavid45

Support thermometre/hydrometre

Pour imprimante “Diggro”

Pobrania
31
Polubienia
2
Ocena
0
P
PrintablesFrikarte3D

Low Poly Syndrome

Do you want to have a unique and nostalgic piece that reminds you of the classic animation style? Then you need the Low Poly Syndrome, a 3D printable model that lets you create your own custom figure of Syndrome with low polygons. This…

Pobrania
31
Polubienia
5
Ocena
0
P
Printables3DPrintastica

Miami International Autodrome, USA Formula 1

Miami International Autodrome, USA Formula 1 When using the STL file you need to scale the circuit up to 140% to fit the stand.

Pobrania
31
Polubienia
4
Ocena
0
P
PrintablesClc02f

Vertical Hydrometer Mount

This version will fit the same hydrometer as the original model, below is a link to the ones I used. This model will hang vertically from the lid and show on the side of the container instead of at the top of the lid. Since I was storing…

Pobrania
31
Polubienia
4
Ocena
0
P
Printablespkmn

Hydrometer attachment for HSW

This handy attachment works with this honeycomb wall Honeycomb storage wall . To attach, go to the honeycomb wall files, and print one insert-empty. To attach the hydrometer to the insert, just press the peg into the insert. These are the…

Pobrania
30
Polubienia
15
Ocena
0
P
PrintablesRschell

Hydrometer Stand

Hydrometer stand with a well lit viewing angle that is placed just above the control panel. Designed to sit on the case seam inside the Core One door. 3mf model file is configured for two 7.6 x 2.6 mm magnets, but can be adjusted easily…

Pobrania
30
Polubienia
6
Ocena
5
P
PrintablesJeff_Dunham

Andromeda's Edge planet tile tray

This board game tray holds up to 14 planet tiles from the board game Andromeda's Edge. This is the maximum of unused tiles when playing a 2 player game. The tiles are easily removeable with the large notch on one side of the tray.

Pobrania
28
Polubienia
3
Ocena
0
P
PrintablesDoKa

Hydrometer Halter Filamentbox Makerbull

Makerbull verwendet bei seinen Filamentboxen eckige Hydrometer. Ich hatte allerdings noch runde, darum habe ich den Halter neu nachkonstruiert.

Pobrania
28
Polubienia
1
Ocena
0
P
PrintablesWorld4Print

Andromeda Planter – Galaxy Series | Modern Mesh Design Pot

Der Andromeda Planter aus der Galaxy Series ist ein moderner, minimalistischer Blumentopf mit markantem umlaufendem Mesh-Relief. Das Design kombiniert klare Geometrie mit einer ruhigen, zeitlosen Oberfläche und eignet sich ideal für…

Pobrania
27
Polubienia
8
Ocena
0