P
PrintablesRCPrinter
Modified Steering Bar to fit DS3218 Servo
This is a modified steering bar which better fits the dimension of a standard DS3218 servo. Print with supports.
- Pobrania
- 1023
- Polubienia
- 36
- Ocena
- 5
Wyniki wyszukiwania: ds3
71 modeli
P
PrintablesRob Latour
Enclosure LCD 1602 ESP32 DS3232RTC I2C
Enclosure for LCD 1602 screen driven by a ESP32 DOIT DevKit v1 with a DS3232RTC I2C Real Time Clock module Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 Infill: 15 Filament: Prusament PLA PLA…
- Pobrania
- 478
- Polubienia
- 43
- Ocena
- 5
P
Printablespjhutch
Gigabyte B360M DS3H IO Shield
I started with Dante's IO Shield blank and laid over an image of the IO shield. I converted the layout image to an SVG file and used Tinkercad to cut the port locations into the blank. I got it first try but the IO shield was a tight…
- Pobrania
- 366
- Polubienia
- 7
- Ocena
- 3,5
P
PrintablesDyne
DS3231 Real Time Clock modules mount
Simple mount for a DS3231 real time clock module. The module PCB attaches to the mount with M2 screws, and the external mounting tabs are sized for an M3 screw.
- Pobrania
- 281
- Polubienia
- 14
- Ocena
- 4
P
PrintablesNewbie Yep
Arduino DS3231 ZS042 AT24C32 IIC Module Precision RTC Real time Clock Memory mount
Arduino DS3231 ZS042 AT24C32 IIC Module Precision RTC Real time Clock Memory mount. V4 has 2.75mm holes and V5 has 2mm holes Category: 3D Printing
- Pobrania
- 251
- Polubienia
- 15
- Ocena
- 5
P
PrintablesMehdals
FL4K Bust from Borderlands3
Sculpted bust of Fl4k from Borderlands
- Pobrania
- 226
- Polubienia
- 59
- Ocena
- 5
P
Printableskjt270000
Gigabyte B450M DS3H IO Shield
Easily printable IO Shield for the Gigabyte B450M DS3H motherboard. Even though I had no issues using this IO Shield printed in PLA I would highly recommend going for filaments with a slightly higher melting temperature than PLA like PETG…
- Pobrania
- 201
- Polubienia
- 5
- Ocena
- 0
P
PrintablesAltirix
Gigabyte A520M DS3H IO Shield AM4 Ryzen
replacement io shield for A520M DS3H Category: Replacement Parts
- Pobrania
- 182
- Polubienia
- 9
- Ocena
- 0
P
Printablesrepairwins
GIGABYTE B450M DS3H Motherboard IO Shield
This is an IO shield for a GIGABYTE B450M DS3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
- Pobrania
- 178
- Polubienia
- 3
- Ocena
- 5
P
PrintablesEric T
Depstech DS300 Endoscope Cable Holder
This holder is specifically designed for the Depstech DS300. It comes in 4 parts that screw together using 4 M3x30mm screws. To assemble, be sure to slide the left and right clips onto the main body of the endoscope before attempting to…
- Pobrania
- 144
- Polubienia
- 18
- Ocena
- 5
P
PrintablesCruisnGrrl
B450M DS3H WIFI IO Shield
My friend made this STL because the board he gave me didn't have a shield said I could upload it here as we were unable to find one pre-made. Using the defaults for PLA will result in PLA spaghetti, see the settings below. PETG would…
- Pobrania
- 136
- Polubienia
- 4
- Ocena
- 0
P
PrintablesEnjoyneering
Gigabyte B450M DS3H (rev. 1.x) backplate
My backplate for Gigabyte motherboard B450M DS3H (rev. 1.x). Number of walls 3, layer height 0.2 mm, infill 15%, 0.4mm nozzle, no supports.
- Pobrania
- 92
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPaul Bibb
Gigabyte-B250M-DS3H Motherboard IO-Shield
I built a computer for my father a few years back that was missing an IO-Shield. I figured I might share. Also includes a Rick Silhouette with “Peace Among Worlds” :D Fits this Motherboard: Gigabyte-B250M-DS3H…
- Pobrania
- 89
- Polubienia
- 1
- Ocena
- 0
P
Printablesrandom
citreon DS3/C2/C3 Parcel shelf clip
citreon parcel shelf slip
- Pobrania
- 85
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMishuPwns / YA3DPCh
Gigabyte B250M-DS3H IO Shield
An IO Shield replacement for the Gigabyte B250M-DS3H based of Paul Bibb's model
- Pobrania
- 84
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDS3D4U
DS3D4U Vase 3, Classic bud
A simple textured vase. Print tested with PLA in spiral vase mode in layer heights ranging from 0.10mm-0.30mm with a 2mm thick bottom.
- Pobrania
- 83
- Polubienia
- 8
- Ocena
- 5
P
PrintablesEric T
Depstech DS300 Case
This case is specifically designed to fit the Depstech DS300 Endoscope Cable Holder designed by me. https://www.printables.com/model/674345-depstech-ds300-endoscope-cable-holder Using the design from Whity's Rugged Box model. You will…
- Pobrania
- 80
- Polubienia
- 10
- Ocena
- 5
P
PrintablesFilesearcher
Power Record DS300 to Festool Vaccuum adapter
Support: no Layer-height: 0.2 Infill: 15% Material: PLA
- Pobrania
- 77
- Polubienia
- 10
- Ocena
- 5
P
PrintablesHalitÖmerGüleç
Gigabyte B460M DS3H V1.0 IO Shield
Again a classic second hand case, the motherboard arrived but not the io shield. I made a simple drawing on Tinkercad and tested it, it's not perfect but it will work. Use it as you want completely free :)
- Pobrania
- 73
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDS3D4U
DS3D4U Oil lamp style lamp shade
A simple lampshade that is printed in vase mode with an adapter plate it rests on. It should be able to fit most floor lamps some modification or scaling of the model might be needed depending on the lamp. The shade should be printed…
- Pobrania
- 73
- Polubienia
- 12
- Ocena
- 0
P
PrintablesForez
- Pobrania
- 68
- Polubienia
- 15
- Ocena
- 0
P
PrintablesSubcio
Citroen DS3 Phone Holder
It is reuploaded model of my remix from Thingwerse.
- Pobrania
- 65
- Polubienia
- 5
- Ocena
- 0
P
PrintablesLeo
Clip-Gancio cappelliera DS3
Per pannello con alette rovinate, con superficie di appoggio maggiorata rispetto all' originale. Per l'assemblaggio usare viti M3x12mm.
- Pobrania
- 65
- Polubienia
- 6
- Ocena
- 5
P
PrintablesMilhause
Samsung Galaxy Buds3 wall holder
Easy and fast 20min print, if You want absolutely smooth bottom part, You can use support. I used double-side tape to attach in to the wall.
- Pobrania
- 62
- Polubienia
- 4
- Ocena
- 5
P
PrintablesDS3D4U
DS3D4U Micro Wallet
An attempt to make the smallest wallet possible without sacrificing structural integrity. Print tested in PLA at 0.10mm layer height with 3 perimeters @ 30% gyroid infill tolerance between parts is 0.10mm. .STEP provided to show how it…
- Pobrania
- 49
- Polubienia
- 15
- Ocena
- 0
P
PrintablesDS3D4U
DS3D4U Floral Lamp Shade
Tested print settings included in print file. Print was tested in PLA with a LED bulb Not for use with incandescent or fluorescent bulbs. Colors with high translucency such as an undyed plastic recommended for the bottom of the print to…
- Pobrania
- 49
- Polubienia
- 9
- Ocena
- 0
P
PrintablesNeogame
CITROEN DS3 DOUBLE CUP CONSOLE HOLDER
Upgrade your Citroen DS3 interior with our thoughtfully designed 3D model - a double cup console holder. Keep drinks within reach while driving in style. Enhance your driving experience with convenience and aesthetics. Elevate your car's…
- Pobrania
- 48
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKimframes
DS3231 case
Case for the 3 in 1 DS3231SN RTC module with LED display. Can be found on aliexpress.
- Pobrania
- 48
- Polubienia
- 5
- Ocena
- 5
P
PrintablesSmolboi
Pico DS3218 belt drive
Only parts that are changed are the sliding servo arm and the pulley base. All parts should be interchangeable with the 4 lane pico but I've only tested it on the 3 lane. I've also included printed spacers to use the extra bom bearings as…
- Pobrania
- 46
- Polubienia
- 13
- Ocena
- 0
P
PrintablesAnshu vishrolia
DS3215 Servo Horn - 1:1 Precision Fit with Brass Shaft Support
Overview This custom-engineered servo horn is designed specifically for DS3215 servos. It features a 1:1 accurate fit to ensure perfect mechanical alignment. The standout feature is the integrated brass shaft support, which reinforces the…
- Pobrania
- 41
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDS3D4U
DS3D4U Vase 5, Tulip
A simple textured vase. Print tested with PLA in spiral vase mode in layer heights ranging from 0.10mm-0.30mm with a 2mm thick bottom.
- Pobrania
- 36
- Polubienia
- 6
- Ocena
- 5
P
PrintablesStrandedOrg
Cytron Smartdrive Duo MDDS30 Two Channel Dc Motor Driver Case with Fan
Simple tall case for the Cytron Smartdrive Duo MDDS30 Two Channel Dc Motor Driver. Supports a 40 X 40 X 20 fan with M3 30 mm standoffs. Printing: No top or bottom layers for airflow 5 perimeters Snug or Tree supports for the wire openings…
- Pobrania
- 34
- Polubienia
- 0
- Ocena
- 0
P
PrintablesHentai Kamen
OMP M4 Max: Tail Servo DS3515T Alignment Aid
Helicopter: OMP M4 Max with tail servo DS3515T. Simple alignment aid for the OMP DS3515T tail servo. In the manual, the servo arm should be mounted at 115°. This alignment aid helps find the most suitable position for the arm. Procedure:…
- Pobrania
- 27
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDS3D4U
DS3D4U Slim Wallet
A “Slim” wallet designed to be both sturdy and as repairable as possible. Print tested in PLA @ 0.10mm - 0.20mm layer heights. Parts have a tolerance of 0.1mm. .STEP file included so you can see how the parts fit together. You will need…
- Pobrania
- 27
- Polubienia
- 12
- Ocena
- 0
P
PrintablesSean Smith
DS321 Vacuum Adapter
Small adapter to allow connecting a Black & Decker DS321 Roadster belt sander to a festool vacuum, with an ID on the festool end of 50mm. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: Yes Resolution:…
- Pobrania
- 26
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDS3D4U
DS3D4U Max Wallet
A sturdy 3D printable wallet designed to hold 8 cards plus a decent amount of cash in the forms of both bills and coins. Print tested in PLA at 0.10mm layer height with 3 perimeters @ 30% gyroid infill. Tolerance between parts is 0.1mm.…
- Pobrania
- 24
- Polubienia
- 7
- Ocena
- 0
P
PrintablesA A
Citroen DS3 dash clamp & magsafe holder for phone
A dash clamp for Citroën DS3 with a holder for a magsafe charger. Mounts between the vents and the LCD display. Parts press-fit together, and the magsafe holder snugly holds a magsafe charger. There's a hole on the back of the magsafe…
- Pobrania
- 23
- Polubienia
- 1
- Ocena
- 0
P
Printablesjango787070
B550_DS3H_AC_IO SHIELD with wifi slot
Edit to include the Wifi antenna slot on IO shield Category: Computer
- Pobrania
- 23
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDeniss K.
Gigabyte B560M DS3H V3 (rev. 1.0)
I bought a B560M DS3H V3 off eBay without an IO shield so I made my own. Printed on Flashforge 5M from PLA+
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMichael Schmidt
osVAC Neo M32 Adapter for Record Power DS300 Disc Sander
osVAC Neo M32 Adapter for Record Power DS300 Disc Sander Upgrade your workshop’s dust management with this precision-fit osVAC Neo M32 adapter. Specifically engineered for the Record Power DS300 12" Disc Sander , this connector bridges…
- Pobrania
- 20
- Polubienia
- 0
- Ocena
- 0
P
Printablesreinerv333
Maschinenschutz Record Power DS300
Für meinen Tellerschleifer einen Ersatzschutz um den zerbrochenen Maschinenschutz zu ersetzen! Ich habe PETG genommen mit 50% Füllung damit es stabil genug ist , den Pfeil habe ich mit Lackstift ausgemalt!
- Pobrania
- 19
- Polubienia
- 3
- Ocena
- 5
P
Printablesedringel
DS3231 Side Mount
Hobbyists and makers frequently use a real-time clock module in their designs. One very common board is a DS3231 mounted on a board with a coin-cell holder, EEPROM, and the necessary resistors/power LEDs. I found myself in a situation…
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDS3D4U
DS3D4U Folding Desk Notepad Holder
Designed to hold a notepad/book above the mouse while not impeding the use of either. The sides fold inward and are retained by a latch to facilitate portability, there is a ridge along the bottom to retain your notebook and a pen. The…
- Pobrania
- 18
- Polubienia
- 11
- Ocena
- 0
P
PrintablesMaxim Shchetynin
Oscilloscope holder for «OWON XDS3000» or «Voltcraft DSO-6000»
Holder for oscilloscope of one of the following model series: Voltcraft DSO-6000 Series OWON XDS3000 Series
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDS3D4U
DS3D4U Vase 2, Stove pipe
A simple textured vase. Print tested with PLA in spiral vase mode in layer heights ranging from 0.10mm-0.30mm with a 2mm thick bottom.
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 5
P
PrintablesDS3D4U
DS3D4U Vase 4, Triangle
A simple textured vase. Print tested with PLA in spiral vase mode in layer heights ranging from 0.10mm-0.30mm with a 2mm thick bottom.
- Pobrania
- 15
- Polubienia
- 3
- Ocena
- 0
P
PrintablesOndřej Sluka
YardForce 500 mount for WTRTK-960 GNSS + STA-901 antenna + LSM6DS33 IMU
This holder mounts to two of the standoffs in the front part of the mower. The standoffs are drilled and M3 heat set inserts (I used BOSSARD 1386743) are pressed in. M3 screws are then used to secure the holder. The PCB to the left of the…
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
PrintablesGullemissen
DS3 button holder
for fx lights, washer fluid if ya wringing loom is broken like mine, or for usb charging ports just stuck on with a little 3m vhb tape.
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printables3DBob
DS3225MG Servo 25Kg Mount and Housing
This is a mount and housing for DS3225MG servo. Control wires come out the bottom opening. Some supports are needed, and you’ll need to tell your slicer to pause at the top of the embedded M3 nuts so you can insert them. (See photo) I…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJeff Chen
SSDS3 Gasket for TurboGrafx
Gasket for making TerraOnion SSDS3 taller to fit onto a TurboGrafx Print with no support. The H-shape piece goes under the PCB. You may want to fix it by driving some of the screws from the top side just to make it less fiddly while you…
- Pobrania
- 11
- Polubienia
- 3
- Ocena
- 0
P
Printablesazi3dprint
Samsung Buds3 Pro Holder (for HSW)
The Samsung Buds3 Pro Holder (for HSW) is a functional wall-mount designed for use with the Honeycomb Storage Wall (HSW) system. It provides secure, accessible, and organized storage, making it ideal for clean wall organization and quick…
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTechniCraft Maker Studio
Remix of DS3231 Side Mount by edringel | Adds screw holes
I use the DS3231 often in projects and I liked the side mount design made by @edringel_23. It occurred to me it would be good to have screw holes as an alternative to using glue. I have a favorite subtractor I used to add recessed M2…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDrCyanide
Gigabyte B450M DS3H (rev. 1.x) backplate, v2
Remix of @Enjoyneering_2033856's plate. Shifts the ports 1.5mm to the left from the original.
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEbonix
DS3 splash shield or Belly pan bolt
As I broke one of the OEM splash shield bolt on my 2017 DS3, I 3d printend new ones. Unlike the OEM one, which have a built in wahser, I made the washer and the nut separated, this way the splash shield can be put in place first and the…
- Pobrania
- 5
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDigital Jedi
Depstech DS300 outline
Shapescan outline of the Depstech DS300 camera. Extend the top to wherever you want to coil the camera cable.
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
Printablessteveprusa1502
CBE DS300 DS120 BC122 CB516 mounting bracket
Male dovetail mounting bracket for CBE line of campervan / motorhome electrical panels e.g. DS300 DS120 BC122 CB516. These panels can be clipped to each other but require screw mounting legs for the ends and middle.
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGaweringo
Corne V3 battery case for PS3/DS3 battery
This is a case to mount a PS3 battery replacement battery like this one with 1800mAh to a Corne V3 (crkbd). The case mounts to the bottom of the keyboard and is attached with three screws. It also adds a bit of tenting to the keyboard.…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printablespfml
Lid for the water tank of the Bosch Sensixx DS38 steam ironing system
We lost the lid for the water tank of our steam ironing system during a move. The design was created based on photos of the tank; it’s fairly rough, but fully functional. 2 parts to print and assemble by gluing I used Prusament PETG for…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
GIGABYTE B450M DS3H Motherboard IO Shield
This is an IO shield for a GIGABYTE B450M DS3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
P
Printables
Samsung Buds3 Pro Holder (for HSW)
The Samsung Buds3 Pro Holder (for HSW) is a functional wall-mount designed for use with the Honeycomb Storage Wall (HSW) system. It provides secure, accessible, and organized storage, making it ideal for clean wall organization and quick…
P
Printables
CBE DS300 DS120 BC122 CB516 mounting bracket
Male dovetail mounting bracket for CBE line of campervan / motorhome electrical panels e.g. DS300 DS120 BC122 CB516. These panels can be clipped to each other but require screw mounting legs for the ends and middle.
P
Printables
Oscilloscope holder for «OWON XDS3000» or «Voltcraft DSO-6000»
Holder for oscilloscope of one of the following model series: Voltcraft DSO-6000 Series OWON XDS3000 Series
P
Printables
DS28X / DS38X / C26X / C27X Servo Dummy
Dummy Case of similar DS28X / DS38X / C26X / C27X Servos Gehäuse Dummy für DS28X / DS38X / C26X / C27X Servos
P
Printables
DS300VS Belt Tensioner Carriage Caps
Carriage caps for reversing the tension bolt in the carriage assembly. I found it difficult to tension the belts and the lack of adjust-ability. I fixed that by removing the nut in the tension fitting and reversing the bolt direction…
P
Printables
DS3D4U Vase 1, Cylinder
A Simple cylindrical vase that can be scaled to any size. Print tested in PLA in 0.10mm to 0.30mm layer heights in spiral vase mode with no top layers and a 1mm thick bottom.
P
Printables
DS3D4U printable snowflake ornaments/earrings
Files are setup as single extruder multi-color. Print tested @ 0.15mm layer height with Atomic filament tropical sea and pearly peach.
P
Printables
Record Power DS300 mitre fence replacement
All you need are two square nuts (m4 and m5). I printed with 0.2 mm on a Bambu X1 with PETG + Supports enabled. Print time approx 1h.
P
Printables
Servo DS3218MG Mounting Bracket
Mount for DS3218MG Servo series. This is a top side mount. I am planning to add another for the bottom.
P
PrintablesDS3D4U
DS3D4U Pet Step V2
An upgraded version of the original pet step. It require significantly more non printed hardware to work, but the design allows for both the upper and lower step to fold. this design has been print tested in PLA using the settings…
- Polubienia
- 4
- Ocena
- 0