Liczymy pasujące modele…
Fits any table top within 22mm or 42mm The prints on the pictures are made of: Prusament PLA Jet Black Headset Hanger 3.0 is available now: https://www.printables.com/model/633754-headset-hanger-30
Simple but beautiful design headphone stand in two versions. (Long and shorter version) Print Settings: Layer Height - 0.2 Infill - 15% Walls - 2 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock…
Stylischer Kopfhörerständer, das perfekte Objekt für alle Gamer oder Musikliebhaber!
A 3D stand divided into two parts: the base and the tower. Specifically designed for controllers and headphones, the tower features arms with adjustable angles at 45, 66, and 90 degrees. This allows you to customize the stand for placing…
headphone & headset holder / stand The bottom is hollow, if you want to put something heavy in there like sand.
Fits any tabletop within 24mm ↑↑You find the recommended printing orientations in the pictures above↑↑
headset model: https://grabcad.com/library/adidas-gaming-headset-1
Screwable headset holder. Can be used on desk up to 35mm. Headset width must not exceed 38mm.
recomended equal or lower 0.20 mm layer height due to the need of printing a thread in laying down orientation
I designed this headset holder because I don't have space on my desk for my headset. That's why I came up with the idea of designing a holder that can be screwed to the table top. To avoid injuring yourself or gain space, you can simply…
Die Schraube geht am Anfang etwas schwergängig in das Gewinde.
Inspired by a number of holders found on the web. Nothing fancy, just a place to hang your headset and its associated cable(s).
Stand for two Dualsense 5 controllers and a headset. Features a passthorugh for a charging cable that will connect to either controller or the headset. Designed for Dualsense 5 and the Pulse 3D headset, but should work with most headsets.…
Wall mountable xbox controller and headset stand, xbox logo on top part. Category: Video Games
It fits 17mm, 18mm, 19mm and 20mm tabletops. Just choose the right file to download. I have a IKEA table top that are 17mm thick The print on the pictures are made of: Prusament PLA Jet Black And is the 17mm version
To properly secure the weak point, the model must be slightly below where the headband attaches to the frame. https://makerworld.com/en/models/2018195-playstation-pulse-elite-headset-fix#profileId-3040885 (for bambu users) Some people…
Designed to allow for the use of the Specialized SL7 spacers/stem on the 2022 Allez Sprint. It transitions from the round headset to the SL7 spacers with cutouts for internal cable routing. I printed in PETG at .2mm layer height, 100%…
Hi, here is my design of a playstation 5 headset hanger. I tried to make the hanger as best suited to the headset as possible and well presented, I moved it away enough so that the headphones did not lean against the console. It is best…
I printed it with a 0.4mm nozzle and a layer height of 0.2mm with PLA on My Ender 3 which worked well for me. Also, I wouldn't use supports as they may mess up the threads and the threads print well without them. I would recommend…
This headphone holder is very easy to print it dimension is 20x15x10cm and it is printed lying on its back. Make sure to adjust the position so it is lying down. You should use support for the headset hanger, everything else does not…
This works well for my PSVR2. There are a few choices for the base that add extra weight in the front to reduce tipping over backwards. See the STL files for the base choices. I printed the simple ‘front bar’ one at first and then the…
Wanted a sleek way to mount all Oculus/Meta headsets without getting near the lenses. This model uses the facial interface of the headsets to mount to get away from the lenses. Settings used: Layer Height = 0.20mm Walls = 4 Infill = 20%…
Another minimalist but ingeniously designed holder for headphones. An eye-catcher at your workplace, in the gaming corner or in the living room. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock…
Should be compatible with Logitech Headsets G230, G231, G332, G430, G432, G930 but only G332 was tested, and works perfectly. I used Prusa Mini+ with Prusament PLA and default “0.10mm DETAIL” settings in PrusaSlicer. Original author:…
Universal headset holder to mount to the corner of your monitor.\_(ツ)_/ Attatch it with double sided tape. I used 3M VHB. Mirror it in the slicer if you want it on the other side. I printed it in Prusament PLA with a 0.6mm nozzle and…
End Caps for Open V-Slot 2020 with Open Hardware logo. This is a remix from https://www.thingiverse.com/thing:398515 Zkrácená verze na 6cm pro sluchátka Print instructions Category: Audio Summary End Caps for Open V-Slot 2020 with Open…
The original model couldn't be used on my desk because it is much thicker then 35mm, so I remixed it. You'll need screw.stl, plate.stl and nut.stl files from the original model (…
A good friend of me needed a Controller and Headset holder for her new Xbox oneX. I searched but didnt find one that looks good for me. So i opend Fusion360 and did it myself. I used the Controller stand from agepbiz…
A very sturdy and clean design i made of a holder that clips on to my Xbox Series X to hold the Controller and Headset. The X infill is a seperate file and can (ofcause) be printed in various colors to match your style. You might have to…
Headset Halter mit 2 praktischen Ablagefächern (oben und unten) für AirPods, Schlüssel oder andere Dinge.
I had my logiTech headset for a few years but the plastic caps broke and i wasnt able to find any replacements, since the last version that i uploaded i have added two small pins to the inside cap the pins hold the metal part that is in…
Headphone Stand V2 This is my split version. I tested the connections on Makerbot Version. If possible, publish your print on the Make tab. Tips: Paypal: https://www.paypal.com/donate/?hosted_button_id=XPLQK39DNVVSU BuyMeACoffee:…
Various on-board holders for Bose A20 Control Modules. The modules fit in perfectly and are aligned with the top layer of the holder for optimal accessibility of the keys and volume knobs. Also fits for the Bluetooth Version. Fix in a…
Hi all I designed a Holder for my PlayStation 5 Headphones, the Holder fits mid-panel & will keep the Headset level, I also designed the distance to be just right so the headphones don’t permanently rest on the side panel. There are no…
A remix of the simple IKEA Skadis headphone holder, which is made for wider headphones/headsets. The holder is available in 3cm, 4cm, 5cm, 6cm. I also added 2 holes to save filament. Supports where are necessary for printing. Update…
Stores your Steam Frame in a shaped tray, and both controllers drop into cradles in the middle, so the head strap wraps around them. The whole kit ends up in one compact bundle that takes about as much desk space as the headset alone.…
English: The Xbox Series X Controller and Headset Holder allows you to securely and conveniently store your Xbox Series X controller and headset near your console. This holder has been specifically designed for 3D printing and is easy to…
Description Headphone holder with screw clamp mechanism for mounting it to a desk. In this configuration, desks ranging up to 38mm can be accommodated. The screw features a hexagonal style head for a little different aesthetic than most…
After finalizing the DB KÖF-II locomotive succesfully (https://www.printables.com/model/181942-db-kof-ii-gauge-1-132-45-mm), I challenged myself to design the Dutch alternative to this German shunter. This is the series 200-300 of the…
A simple headset holder for the honeycomb storage wall. Added a lip at the edge to prevent wider headsets from falling off.
Adjustable Holder for your gaming Headset. For 20 to 40mm thickness
Fasya Daud's original design from https://www.myminifactory.com/object/3d-print-batman-heatset-stand-21232 Print Settings: 0.24 layer height %20 infill 3 walls 3 top/bottom No support/brim
Headset Stand with a slot for a USB-Stick
Inspired by a social mediapost and couldn't a model on printables.com so I modeled myself. Fit's also now on Prusa Mini. There is a little section on the lower arm with a tray. Prints in 3 parts, with a little bit of supports for the…
Just my design of a headset holder. The object consists of one part and has a total height of approx. 250 mm. A printer with a size of 300 x 300 mm is therefore required. -You dont need supports Print Settings Printer Brand: Creality…
Print on flat surface with support enabled . It can also be used for Flysky Flight Controller or earmuffs.
Table top headset hanger. Limitations: Tabletop: Hanger_v2: maximum thickness ~25mm Hanger_v2_extend: maximum thickness ~35mm Headset: headband with maximum width 45mm Tips: Horizontal Expasion (Cura): -0.02 XY Size Compensation (Prusa):…
Stand for a headset and controller. Designed for a friend so may aswell upload. Works quite well, sturdy too. Should work with most headsets. I designed around the official PS4 headset, which has quite a big headband, this has plenty of…
Hi, this project is a beta test because i have not received my printer yet, so give me advices for the mode Need tree spings, one for the trigger that is a compression spring 4,5 mm DIA by 10mm long, one for reload activation system 4,5…
< Beep bada beep AI is loading... > Is it a top secret stealth aircraft? Or is it a gate to another dimension? No! It's the next big thing since sliced bread! Inspired by hardcore gamers all around the world.... With edges so edgy it will…
recomended equal or lower 0.20 mm layer height due to the need of printing a thread in laying down orientation
Just another holder for dualsense and headset. I wanted one that clips directly to the PS5, so I combined several models found on Thingiverse so the main one is https://www.thingiverse.com/thing:4705298 Just print it on the side without…
Support needed for the upper hook. Perimeter > 4 for best strength
The two mirrored parts are glued together and inserted with a tight fit in the base Height : 26 cm/10.25 in Base: 16 cm/6.25 in X 9.5cm/3.75 in
Elevate your AceXR experience with this professionally engineered Glock 17 Generation 5 shell, featuring a fully overhauled and stress-tested Fire Control Unit (FCU). While the original concept was a great starting point, this version has…
Hey guys, this is a design I made for a headphone/headset holder. you can screw/glue this mount under a table or a shelf. I split it into two parts for easy printing. the parts just snap together you can use a bit of glue but you can just…
Attaches to the wall with a single screw, large enough to fit any size headband with room to spare. Prints with no supports with wall side facing print bed.
Trailer addon for Landy Mini by 3D Sets. It is just a little remix of by markberk from Thingiverse. https://www.thingiverse.com/thing:4656335
A trailer for the Landy mini from 3Dsets.com: https://www.prusaprinters.org/prints/41264-landy-mini-by-3d-sets Remix of the smaller trailer. For me it was too small and it was too high compared to the car. So I remixed it. Also fixed the…
The rods that connect the middle part to the top part may need to be sanded down a bit for a perfect fit. Hight : 23cm
Hair clip/plugsuit head input for Rei Ayanami from Neon Genesis Evangelion, I based it on figurines of her. Shinji Ikari uses the same ones I believe. There's a second version which I sliced a curve of the bottom in case you want to wear…
About 1mm off from a G19 grip, could use some cleaning up but its functional and looks good enough! used for gaming purposes only. Added .3mf file for Bambu users and .stl as well.
I made this headphone / headset wall hanger because a friend of mine asked me for one. Although there are some on Thingiverse, he wanted to see the design process. I added counter sunk holes for wall mount but I'll probably use 3M Command…
For mounting the quest 3 headset on the wall. Other models of similar style had no way of retaining the headset from sliding off to the side. To fix this, I added a notch by the nose piece and a lip around all of the edges, not just the…
Simple hook for Pulse 3d charger For PS5
Remixed from LUN5H TIME's original Xbox 1 Controller / Headphone Wall Mount V2 I redesigned this model using the original design side profile as it works great for holding the XBOX Controller. However, the controller can move left and…
I have modified the BR Class 08 published by Peter Davis at the GaugeOne3DCircle ( https://gaugeone3dcircle.groups.io/g/home/files/BR%2008%20Shunter ) to the Dutch version of this locomotive. Thanks again to Peter for publishing these…
Stylish gaming headset stand inspired by the Corsair Gaming ST100 design stand dimensions 120x120x250 The premium headphone stand can be printed on the Prusa MK3/S/S+ printer as a single part. It can also be printed on a PRUSA MINI/MINI+…
Headset Stand with Hexagons and Storage. No glue needed for the ring
Simple and fast to print. A little bit curved for better fitting and stability.
Should fit almost all headset sizes. If it doesn't fit your headset you can contact me and i can make a remix. Can be fixed with 4mm countersunk wood screws or double sided tape. The big holes in the bottom should be big enough for a…
DWX grip (Shadow 2) for Ace VR. Barrel/Slide is generic 2011 slide but it is close to the DWX. Could be remixed/cleaned up to be more accurate, but I just wanted something close for a fellow ACE VR user. THIS DOES NOT REPLACE THE ACE FCU…
The world doesn't need more boring 3D printed headset spacers, so I made some slightly less boring ones. I also made some very boring headset spacers. These are for standard 1 1/8" headtubes, but I've included the F3D and STEP files so…
In 1986 the "Nederlandse Spoorwegen" (Dutch State Railways) started the refurbishment/reconstruction of "ballastwagons". Details: https://nl.wikipedia.org/wiki/Fccpps and http://spoorhistorie.com/goederenwagens-fccpps.html At first this…
This is my interpretation in Gauge 1 (1:32) of the DE1 railcar designed by Allan (Rotterdam) for the “Nederlandse Spoorwegen” in ‘50’s. https://en.wikipedia.org/wiki/Blue_Angel_(train) https://nl.wikipedia.org/wiki/Blauwe_Engel These…
After both world wars, a lot of German rolling stock was left behind all over the continent. The Nederlandse Spoorwegen (Dutch state railways) operated several DR G10-Kassel covered goods wagons. They were, amongst others, registered as…
Male driver is based off of: https://grabcad.com/library/the-male-figure-carl Female is based off of: https://grabcad.com/library/mulher-sentada-seated-woman-human-person-1 Scaled and modified to fit as a driver and passenger in the…
After the second world war Alsthom (still with the letter “H” in the name) build 130 diesel electric locomotives for the Nederlandse Spoorwegen (Dutch state railways). They were based on a standard for locomotives in France and the French…
Printed at 0.2 resolution, 15% infill Fits K1c plate.
Stand for 3Dsets Jeep Rancher 4x4 & Landy 4x4 & Bamboo 10/2/2020 - addes v2 upper part for much more stability 13/2/2020 - added v2 middle and bottom part, can now be screwed together 2/10/2023 - adde middle R-20 part for compatibility…
I designed the hook to fit the Ikea Bekant desk top, which is 16.75mm thick. I've also included a small hook on the bottom to hold a charging cable. Update: Added screw hole for most secure hold.
Gaming Headsetholder (optional Multicolor) Black & Orange = Call of Duty Black Ops 6 Design
This is a remix: https://www.thingiverse.com/thing:4394842 Mud guard for the front and back of the 3DSets Landy. Logo land rover
Headset hook to stick on the wall using a 3M Command™ medium adhesive strips. The back of the bracket has a small ressess to hide the 3M strip. I printed with support and it turned out great. 0 bottom and top layers to see the honeycomb…
This is my 1:32/Gauge 1 interpretation of the GTU coal wagon operated by the Nederlandse Spoorwegen. Some details on Dutch cargo wagons are published here:…
My Logitech G433 was broken on both Pivot Points, but i can't find Spareparts for the G433 :-(. Here are my printable Spare Part's ;-) You need: print all four Parts (two Left, two Right). 8 M3x8 Screws 8 M3 Nuts T5 Torx Screwdriver small…
15mm is hole spacing 3.10. 2020 - servo arm 15mm 3.10. 2020 - added servo arm 15mm + nut hole 4.10. 2020 - added 20mm version 4.10. 2020 - tooth optimization Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Replacement cap between the headband and the ratcheting mechanism. I printed in PETG to allow for some flex when adjusting the headset. If you are missing the original screws you can can use M2 6mm screws. My headset has 4 holes to hook…
Why I made this I made this controller + headset holder for a friend (that's why I don't have a picture). he wanted something like the holder from "3l3m3nt"(I can't find him at thingiverse anymore. he probably deleted that design). But…
A charging stand for Jabra Evolve 75 wireless headsets. Print settings Material: PETG Layer height: 0.20 mm No supports needed. Materials Anker Powerline Micro USB cable - A8133011 (Other cables probably will not fit) Self-Stick Rubber…
This is a remix of the "Headset Stand" from "DecoPrint". The original is too large to fit on a 200x200mm bed. The original model was divided into a top and bottom part. You need 3x M4*30 screws and 3x M4 nuts. The ring insert can be found…
Highly stable, original design. Just perfect for your favorite headset. Printed in PLA, 0.4 mm, 20% fillin, no need support. You need 4 screws M4x 35 mm and 4 nuts M4 for the assembly. The logo plate is glued on the holder with 3 plugs
3 in 1 PS5 Base vertical (HEADSET STAND + CONTROLLER) REMIXED SCALED Width: 4.09 inches (10.4 cm) Depth: 10.24 inches (26 cm) PRINT Scheduled for the Weekend will make horizontal stand soon!!
Headset holder compatible with the honeycomb wall
Even with 0.3mm pitch, embossing looks good. Three M4 standard screws are required for installation, i.e., screws with an outside diameter of 4 mm on the threaded part. Horizontal and vertical grooves are carved around the screw holes for…
Designed this headset stand for my sons friends birthday. Printing: Stand: 0,2mm resolution, no support Top: 0,2mm resolution, support on plat for the opening. You can make color change at layer 216 if you want the white outline. Middle:…
These devil horns are made to be attached to a headset or headphones. The .stl file is one single horn. The .3mf file is for Bambu Studio and already includes two horns on the build plate. Print Settings: I printed the horns with 0,12 mm…
I tried to find earbud case, but finally designed my own. Print without supports. Please share you makes and consider donation. https://paypal.me/novatormaker https://revolut.me/onovator
Time for my first Fusion 360 Project. Headphone or Headset holder with a variable design that anyone can adds a favorite color accent to fit perfect in your own workspace. Print settings: 0.4 nozzle 0.2 mm layer high Print the Holder with…
![[Honeycomb] Headset holder](https://media.printables.com/media/prints/298622/images/2613131_a9e9ebd3-fdd7-462d-8d5c-d15636d68fd4/rn_image_picker_lib_temp_a227e0dd-6568-44eb-9bc0-3b1ad1407bd3.jpg)
