Liczymy pasujące modele…
3 Pin Male Plug IEC320 C14 Chassis Panel Power Inlet Socket Connector I designed this thing in order to have the most detailed 3d Model of my CNC electronics enclosure. It is fairly accurate and should do for future CAD models that need a…
This is a 3D model of the IEC320 C14 Power Socket that comes with a Fuse Holder and a Switch for IEC C13 Power Cable connection. It's designed in Fusion 360, .f3d files are included. I tried to make the dimensions as close to real one as…
A dust cover for an IEC320 C14 Receptacle. Even though the friction fit is good, a cutout has been added to keep the cover attached, using a string or similar, when not in use. Print instructions Material: PLA Supports: No Layer Height:…
I designed this socket for my new printer. It fits 3030 extrusion frame and you need, for assembly: 2x M4 nut 2x M4 bolt 2x washer 2x M5 bolt (for fix to 3030's) Print instructions Category: 3D Printer Parts Post-Printing M4 nut Inserted…
Eclosure for WX-2412 24V power supply board. It was designed with 3D printing mentality. No supports needed. CAD files included. Features: -The 40mm air intake fan -XT60 connector for DC output -IEC320 C14 socket for AC input -Easy…
This model prints in 4 parts for easier painting. Use super glue to hold all parts together. I added some small screws I had lying around for aesthetic purposes.
This is a remix of https://www.thingiverse.com/thing:1342480/ This model includes non-keyed (rectangle) and keyed (a cutout that makes socket to be inserted only one way). I removed all of the code that wasn't directly related to iec…
a box to contain IEC320 C14 power socket and mount with two screws
To assembly it correctly, use some hammer, or just use hot air to get your bearing warmer.
I made this for my RatRig V-Core3 printers with safety in mind but can oc be used with any 3030 extrusion or similar. 6 Countersunk M3 screws, approximately 6-8mm long 6 Heat inserts It is 4mm thick where it attaches to the 3030 extrusion…
Used https://grabcad.com/library/connector-with-switch-and-fuse-2 as a base. Added fusion files if modifications are needed.
3-in-1 protective cap with indicators for charged, empty and storage. It's a bit of a tight squeeze, but it fit a normal EC3 connector this is a remix from XT60 battery cap with charge indicators to get an EC3 battery cap Print Settings…
Printable parts of the Graber i3 printer Print Settings Printer: Graber i3 Rafts: No Supports: Doesn't Matter Resolution: 0.16 Infill: 100 Filament: Generic ABS Black Notes: . Category: 3D Printers
Quick and dirty, simple power panel for the Mendelmax. Print instructions Category: 3D Printer Parts Instructions Print, file switch hole a little to fit (deliberately very tight to snap in). Search on Amazon or ebay for: "3 Pin IEC320…
Created this IEC320-C14 bracket to support my enclosure and provide a little more support when going through side of enclosure
FreeCAD source codes are parametric.
The original part has broken twice for me now over two different cars. The only part to fail other than the wing, but the PETG replacement holds up well. Replace the original by unscrewing it, this is easier if you remove the two screws…
This model is designed to fit an IEC320 C14 socket opening, providing a simple and effective way to cover the hole when the socket is removed. Perfect for protecting your device from dust and accidental contact, this cover ensures a clean…
Designed to cover the wiring connections on a Mean Well LRS-350 power supply and provide a mounting location for an IEC320 inlet socket. Specifically designed for this power connector:…
Flat bracket for attaching an IEC320 C14 power socket and fuse combination vertically with the socket between the switch and the extrusion. FreeCAD design
IEC320 C14 AC socket for Meanwell mount for Ratrig V-Minion OnShape: https://cad.onshape.com/documents/94d8850c0616a0407503a3eb
This is a remixed version of IEC320 C14 AC Power Switch Case adapted to 2020 aluminium profile. It is designed to put AC Power switch in the corner, on top of aluminium profile's angle linker. Category: 3D Printer Parts
I relocated the power supply underneath the bed on my Anycubic Mega SE, and removed the cheesy plastic endcap they used that also held the power plug, fuse, and switch mount. This is a simple box to hold the IEC320 C14 fused power socket…
The archery scope EC33 from Arc Systeme is a very nice one, but the provided sun shield is a bit short when the sun is very low and facing you on the shooting field. This extension covers a larger angle. It can be easily mounted between…
Boitier pour Module d'entrée d’Alimentation mâle IEC320 C14 avec interupteur. https://www.amazon.fr/gp/product/B078NKCYYG/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&th=1
I've bougth SKYRC B6neo 2 charger (awesome thing!) that comes with 8-in-1 charging cable and was shocked that the cable does not have any caps so it is very easy to short curcuit when charging batteries. So I modelled caps for most of the…
Case for the well-known Meanwell LRS-50-5 PSU : https://www.meanwell.com/webapp/product/search.aspx?prod=LRS-50 Design specificities : - Case Front panel : IEC320 C14 inlet power socket with fuse and switch - Case Rear panel :…
Holder for this socket for 2020 extrusion. The powersocket can be rotated 180° , that the switch is at the top side. The holes are made for M3 screws. I recommend petg , it's stable enough! (I haven't tried anything else either) Thanks to…
Print on its side for strength, supports will be needed. Go for a shock-resistant filament like PETG and up the wall count. Made for Eachine EC30 but to the best of my knowledge, it will also fit HBX 16889 shocks. Matching shock foot can…
Printed at 100% infill with 4 perimeters for strength using PLA (I'd recommend PETG, as I did snap one partially - but it worked fine). Probably you don't need full infill but the plastic cost is minimal. You can easily print all 3 on one…
I designed and printed a custom case for a STM32 T12 Soldering station as my previous setup was a lot of pieces. It turned out a bit bigger than i wanted but still quite compact. It is quite a bit smaller than even the smallest regular…
Print in TPU or PETG to provide some shock resistance.
Tool for installing a Cane Creek 10 EC34 headset. May work for other similar EC34/28.6 EC34/30 Headsets. Use with 5/8" threaded rod, two nuts, and fender washers. 16 mm threaded rod should also fit (may be slightly tight requiring minor…
Voron designs use a socket with a press-fit detent. While their method works wonderfully, I prefer the reliability of hardware to secure the mains electrical socket. The included STEP file is for the power socket that can be purchased…
Mount a 3-pin IEC320 C14 Inlet and fused switch module under a DAISO Joint rack wire-meshed shelf! ダイソーのジョイントラックの転び止め棚の下に3ビンIEC320規格C14インレットユニットを固定するための箱 Requirements: * 1 powermounter.stl * 2 daiso.stl * 1 power connector with fused…
Meshed honeycomb-style Voron rear skirts designed with integrated cutouts to accommodate an IEC320 C14 power inlet and a panel featuring two RJ45 connectors. The meshed body must be printed with no top an bottom layers, and 25% honeycomb…
ENGLISH replacement part of the Xiaomi Imilab EC3 rotating base break on security camera, printed in ABS FRANÇAIS pièce de remplacement suite casse de la base rotative sur caméra de sécurité Xiaomi Imilab EC3, imprimé en ABS
The original Eachine EC30/B motor mount supports 14t or 16t pinion gears. This model gives more pinion gear options by adjusting the top screw left/right to find that perfect gear mesh! Tested OK with 12t - 17t pinion gears I suggest…
No supports required
Nothing fancy here! Just a blank to fill the hole of the original ESC power button for HBX / Eachine RCs. Modelled from the original power button.
Turns out Shimano Di2 charging cables aren't magnetic, so I made a little clip that the derailleur end of the charging cable drops into to store it up off the floor when not plugged into the bike. This fits the Shimano EW-EC300 charging…
Check the photo before printing - there are several different brands of the same socket
EMAX Nighthawk 250 Fatshark 600TVL FPV camera mount Category: R/C Vehicles
SANPU EPS350-H1V12 Necessary hardware ( if not stated otherwise, all screws are with a cylindrical head) : 2x M3x14 countersunk screws + 2x any M3 nuts (for IEC320) 2x M3x4 + 1x M3x10 + 1x any M3 nut (for fastening the PSU to the base -…
I had built myself a KiwiCleaner watch parts cleaning machine. The KiwiCleaner design has a sealed PSU fitted to the underside of its baseboard. The PSU has a very short mains cable that cannot be safely replaced with a longer one. I…
Custom-designed wall mount for the Xiaomi Imilab EC3 camera , optimized for installation on insulated facades (ETICS) . The model includes an integrated cable management compartment , allowing you to hide and protect wiring inside the…
Model is deeper and has a little bit more room. Also added a hole on the side. Step file is for you, to add some mods.
Meshed honeycomb-style Voron rear skirts designed with integrated cutouts to accommodate an IEC320 C14 power inlet and a panel featuring two RJ45 connectors. The meshed body must be printed with no top an bottom layers, and 25% honeycomb…
Custom-designed wall mount for the Xiaomi Imilab EC3 camera , optimized for installation on insulated facades (ETICS) . The model includes an integrated cable management compartment , allowing you to hide and protect wiring inside the…
STEP file for power socket that can be purchased here .
This is the rocker switch I installed. https://a.co/d/023pA6a
This is an enclosure to mount this IEC320 C14 fuse and switch combo onto the back of the 4040 rails on a Mega Zero. I did additionally have to tap threads into the rear of the 4040 extrusion, as the holes didn't come pre-threaded from the…
Just a quick and simple model. It's a rocker switch plug for IEC320 C14 socket meant to plug in the hole for the rocker switch in case you don't want to have it there.
This is simply friction fit. I've noticed that several types of IEC connectors exist which have different pin locations, hopefully this one fits yours :D
