Liczymy pasujące modele…
I liked the idea behind this design , but it was too flimsy, even printed on PETG it kept breaking when dropped on the floor. This is designed for the Black Diamond “HotForge” carabiner from their quick-draws, but should fit any of the…
Please like and follow and post your makes. Use care. This looks like a knife but there is no sharp edge. The tip can poke so not for small kids. Use in the home. I made this goofy KA-BAR knife toy, but I like practical prints. So I…
This model is free. If you appreciate this model, please leave a download and a like! Printed in PLA 4 years ago and still working. Made to fit 8mm thick glass. The tight fit makes sure no moisture gets trapped. This model can be scaled…
Quick and easy print for a shower squeegee wall mount. Printed it from PETG and mounted it with double-sided tape (didn't want to drill holes in the walls). Works since months. If you like it, give me a like and post your make! Enjoy and…
Ein Werkzeug welches ich Täglich in meinem Unternehmen verwende. Z-Höhe sollte 7mm betragen, um ordentliche schnitte setzen zu können. A tool that I use daily in my company. Z-height should be 7mm to be able to make proper cuts.
As a vehicle wrapper, I need my wrapping lettering tools every day. Since I still had a BOSCH L-Boxx 374 left, I threw away my old tool box. The L-Boxx offers enough space for all the tools you need. In my work I need different vinyl…
The fit with the blade into the squeegee body is crucial. It must be snug. If it's not, adjust the tolerance parameters in Fusion 360, bend the body with hot water, use super glue, or, write to me in the comments :) F3D and STEP files…
Osteranhänger für den Osterstrauß Schnelle Druck ca. 14 Minuten Eine schöne Osterzeit und viel Spaß beim Duck, über eine Rückmeldung würde ich mich freuen. weitere Modelle: Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit…
Designed for the Pedigree brand dog food toppers but should also work with other 100 gram (3.5 ounce) packets. Reasonably top rack dishwasher safe when printed in PETG (it might warp a bit but is still usable). ASA resists warping much…
This 3D-printable screen-printing squeegee is designed for makers and workshops looking for a versatile and easy-to-make solution. Available in multiple widths and two heights: S for small hands M for medium hands, ensuring a comfortable…
Felt Edge Squeegee for Vinyl Print in the desired size and glue the felt over the edge.
A handy dandy squeegee hanger for in the shower. Super easy to print and attach. I used a waterproof Tesa Powerstrip ( https://amzn.eu/d/hPbDolF ) to attach it to the tiles on the wall but I'm sure most other adhesives like 3M Command…
Print with supports, PETG material for greater strength, 0.2mm layer height. No complaints for two years. The blue one in the picture is my holder, which is similar.
Eine Box für das Kaffeegeld bzw. Kaffeekasse. Die Druckdatei ist für den MK3S+ mit MMU2S, im Port 1 die Farbe für die Box, Port 2 für den Schriftzug. PETG mit 230 Grad Temperatur (ich habe Filament von Sunlu benutzt).
Built in two halves, which can then be glued together. For better stability three 3x14mm stainless steel dowel pins can be used. CAD Model:…
Osteranhänger für den Osterstrauß
This is a clip-on hook for the IKEA BROGRUND corner shelf , specifically meant for a IKEA LILLNAGGEN squeegee but obviously for other hookable stuff too. The hook diameter and clip width is 8mm , dimensions: PRINT INSTRUCTIONS No support,…
For best results, I recommend using TPU 90 A and softer. Using harder TPUs may impair the wiping properties. A dual-sided shower squeegee designed for both curved and flat glass surfaces! 🛁 Curved side fits shower enclosures with…
As a vehicle wrapper, I need my lettering tools for car wrapping every day. Since I still had a BOSCH L-Boxx 374 left, I threw away my old tool box. The L-Boxx offers enough space for all the tools you need. Wooden squeegees with felt…
Small handle for the Aquablade squeegee we use in our shower, with a loop for hanging. The threads look like a standard broom-handle thread so it may work with many other tools. PETG, 0.2mm adaptive layer height, 0.4mm nozzle, printed…
To keep the glass walls of our shower clean, we use a squeegee that hangs on the wall. When the original bracket broke, I quickly designed and 3D-printed a simple replacement. The holder is mounted using 3 mm “monster tape,” so no…
print it as shown in the image
Haken für Abzieher um in an der Duschvorhangstange auf zu hängen. Auf dem Bild und die Druckdatei sind Version 1 (5 mm Durchmesser). Die Modelldatei ist etwas verstärkt V4 (7 mm Durchmesser). Hook for a squeegee to hang on the shower…
print this model laying on it's side. Supports are needed for the arm only
This is a simple FreeGrid box for storing jigsaw blades with overall lengths of up to ~140 mm. Storing blades in loosely takes less space, but the right kind of blade is easier to find if they are neatly organized. The blades are inserted…
Dient als Ersatz für das Original. Passt perfekt! Nicht auszudenken ich könnte keine Kaffeebohnen mehr mahlen … jetzt bin ich safe :-)
Fixes the selfdestroying selfunscrewing ever wobbly crankhandle on my manual coffeegrinder by adding an outer bushing to build up withstand against screw-loosen lateral force. PLA is great for sturdiness, 04 Nozzle, 0.20 Layer, 5% Infill,…
These are simple lids for FreeGrid boxes, featuring neat right-angle cutouts to be able to see into the box, which also make the lids easier to pick up. Contains 1x1 to 1x3 and 2x2 and 3x3 sizes. Other sizes can be made using the .fcstd…
After first looking into making some grid-based storage, I found that the cost of neodymium magnets quickly adds up. Sourcing magnets locally, the 8 magnets for one square would have cost ~2€, and a single drawer or shelf could end up…
Shower Squeegee Holder, Diameter 26mm, Width 26mm Material: PETG Walls: 4 perimeters Infill: 15% I welcome all feedback! I'm eager to see your finished models. Happy printing!
This is based on the official Cricut scraping tool, however I didn't like the design so I made something more fitting for a guy. The edge is chamfered to ensure that it touches the surface evenly. The size of the model is 3.5"L x 3.5"H,…
Simple, 3mm-thick squeegee with two beveled edges and little to no flex. It's similar to vinyl squeegees but for less fragile materials where more firmer pressure is required.
Copy-paste of Creative-Extension11 's wonderful DIY Nods. All info is included in downloads. Please notify me if anything is missing. The EnVeeGee is a digital-only refinement of the PVS-69 created by VonScherfArms. Using the technology…
Simple squeegee based on 3M glod series P.A.-1 or Avery's, same flexibility, same size. Quick and easy, and pretty useful not much filament spent. This is the ideal tool to apply build plates sheets like PEI, BuildTak, Kapton or Painter's…
I needed a squeegee to reapply the old, cracked PEI sheet. Drawing from past experience in silk screening, I know that squeegees designed specifically for screen printing excel in applying pressure evenly, so I designed this. Notes: For…
This version is based on the previous post: https://www.thingiverse.com/thing:3152983 These clips are more robust and rigid compared to the previous ones. There are three versions: Universal film clip that can be used for 135, 120 and…
slouží pro rovnoměrné rozprostření tmelu nebo silikonu v rozích serves for even spreading of the sealant or silicone in
The squeegee for resin printers uses TPU filament, which can effectively protect the FEP film from being scratched.
A simple hanger for the squeegee for a shower cubicle - keep it out of the way when you don't need it! Fits nice and tightly on our cubicle, which has 6mm thick glass. Will need to be printed with supports - and some of them are quite…
Small side mirror squeegee. Of course, one part must be printed with TPU
This is a wall mount for the Inseego Mifi X PRO 5G UW AKA INSGM3100. This can be mounted with command strips, double sided tape, screwed in, or (with the second model) used with a hang screw or nail. Wanted a convenient way to mount to…
Hobbymäßig verarbeite ich recht viel Folie, egal ob Scheibentönung, Folie oder Vollfolierung. Ich verwende meistens 3M-Rakel, aber aus Neugierde habe ich mal ein eigenes Rakel designt und gedruckt. Ich musste feststellen, dass es…
>> The Project is finished now << >> Version 7 (v7) solved a lot of Problems so far<< all holes match properly now to each other New M3 & M4 Set Stronger and thicker Body Higher Motor Adapter in Version 7 for mounting a ¼ Inch Bit Adapter…
Ovo de Squirtle com base de água! Material utilizado - PLA Apenas para fins de portifólio
I needed a squeegee holder for the glass wall of my shower so I quickly designed this. It can fit onto 8mm deep glass walls and can hold a squeegee which is 32mm wide. If you need a bigger size to fit it on thicker walls, simply write a…
Ein einfacher Halter für den Duschabzieher, passend für eine Duschglaswand 8-10mm Dicke. Stützstruktur ist für die Ausnehmung notwendig, eine zusätzliche Haftung ist von Vorteil. A simple holder for the shower squeegee, suitable for a…
Based on those Russian matryoshka dolls. You know, the ones that fit within each other. A Squeegee was added to help get that nice, smooth feel if you tape the lid. I mean, why wrap a box when you can print it out yourself? Make it part…
Große Rakel zum glattstreichen von Tapeten oder Folien ------------------------------------------------------------------------------------------------ Large squeegee for smoothing wallpaper or foils
DF54 exactly indicator that uses the original screw. PETG printed with MMU3, but single exdruder also be fine :)
This is a film drying tool I made using old windscreen washer blades. It worked for my 35mm film. The blades I used are 6mm wide and 11 mm long, see pictures. Don't make it too strong or too weak, the end is supposed to bend like…
Made this squeegee hanger to fit up to 10mm glass. Squeegee in the picture is from Ikea. I printed it in PLA+. Hope you like it.
I printed this with a smooth pei sheet, 0.12mm layer height and a 0.6mm nozzle (ABS) I suggest spray painting this to fill in ridges between layers where solder paste beads could get stuck in (i also used ironing for a smooth finish, but…
Designed for pushing the air out from under car wraps. All you need is a strip of felt on whichever edge you want to use and good to go. I've printed in PETG but you could use PLA. Print Settings Printer: Eryone ER20 Rafts: No Supports:…
This is a simple hanger for holding a squeegee. There are two variants, one has a rounded hook the other does not. Specs Hooks stick out 25mm Hooks are 10mm wide Hooks are spaced 110mm Designed with OpenSCAD, if you need a different size…
Simple gridfinity organizer holder for decal, vinyl or tint squeegee type applicators.
There are a few of these around but I decided to design one specifically for leaving resin in the machine. The lid is 4 parts printed in PETG or PLA. Assembly : Use 7 x M3 screws (10mm long) - I used cap head but countersink would…
Squeegee Holder i made for my bathroom. Minimum distance between the two pegs is 30mm, the flared heads have a minimum distance of 26mm. The Holder is angled by 5° so the Squeegee slides back rather than forward. Use double sided tape to…
For applying transfer tape onto cut-vinyl decals, and then for applying those decals onto surfaces. Make sure your print seams don't end up on either of the long edges of the squeegee. Recommended Slicer Settings: Nozzle Size: 0.4mm Layer…
Update: V3 should shave off some printing time and filament used. Simple holder for my squeegee that will snap to the shower curtain rod. Ein simpler Halter für meinen Duschabzieher, welcher sich an die Duschstange klickt. Print Settings…
So, the other day I was cheerfully cleaning my shower screen when, without warning, my head fell off!!!! This was, as you can imagine, slightly annoying! But I picked it straight up, and popped it back into place. However, a few seconds…
This a support for two screen printing squeegees. I recommend to add rubber feet after printing. Category: Art Tools
A car window squeegee that can be used either standalone, or with the Universal Handle . For the foggy days! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.20 Infill: 25 Filament: Filament PM…
I had the Ettore Extension pole with the threads broken off the end of the taper… so I made a new one. I cut the original off by slicing the plastic on two sides and pushing it off. I probably did not need to do that as there was no…
This is my simple design of a shower wiper holder. Should fit for a lot of wipers. My shower has 8mm thick glas walls.
I adjusted the dimensions for my shower door which is approximately 13mm thick including the plastic seal by the edge of the door. The squeegee makes a nice handle to slide the lock in and out of place. There are two versions of the…
Hanger that I created for Ikeas LILLNAGGEN squeegee. This hanger fits shower doors that are up to 6.5 mm thick. You will need to enable supports to print this model.
******* ATTENTION: Seems like Thingiverse somehow corrupted the "Download All" button for this design. Just download the files individually from the files section, they still work!******** This is an organizer for the boardgame Barrage /…
HSW - Vinyl Squeegee Holder internal box dimensions -75mm x 10mm
For pouch food for dogs nad cats. Holle size 1,5x120mm. Filament need cca 7,5m (0,2mm, 2 wall loops, 15% infill).
Support me: Post a Make and Comment PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- Disclaimer: Posted as original design because the designer Keep Making didn't post it here. He made a dedicated…
This is an universal handle that every car owner needs to see out the car windows when the weather attacks! You can fit an ice scraper (such as this ) You can fit a squeegee for the foggy days (such as this or this ). You could fit a…
EN: Hook for hanging a squeegee in a shower enclosure. Designed to hang on an 8mm thick glass side panel. The model is made to hold firmly in place - it has pre-tensioned grippers - and needs to be pressed onto the edge of the side panel…
Holder for shower squeegee with towel hook to clip onto the top of a glass pane. Fits for IKEA LILLNAGGEN but should also be suitable for other manufactures. There are two hooks on the outside of the shower for hanging towels. The part…
Squeegee for screen printing with replaceable lip (18 cm wide)! Works great! The alignment of the components in the Prusa Slicer, see pictures! Print: Nozzle 0.40 mm Layer height 0.2 mm I nfill for the handle 15% Infill for the lip 10% In…
Ergonomic squeegee 2 sizes TPU blades
I use an Inseego M3000 5G hotspot from The Calyx Institute to provide Internet access to all the devices in my RV. Unfortunately this hotspot does not easily mount to a flat surface. I designed this holder to mount with 3M command strips…
I printed this as a test with no supports and 10% infill on standard 0.2 PLA settings. Seems to be working fine. I may do a 100% infill one if it breaks. I can now fit the window cleaning squeegee onto my 3 meter (9 foot) pole to clean…
NEW UPDATED V2 LONGER WIPER Rubber seal replacement for the Karcher WD3 floor unit, The old seal wears out when used on carpets, and Karcher sells you the whole unit for $30. I designed and made ours from TPU and was printed on a 0.2…
Double hook designed to fit the IKEA TISKEN suction cup. The double hooks are designed to hold the IKEA Squeegee LILLNAG
This is the lightest version of a car squeegee that fits the Universal Holder . No gluing required, just a pair of crafty hands to assemble. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.20…
I used Ender 3 V3 SE with TPU 95A material, and it worked well. This model is created via Solidworks 2024. You can create a remix to fit your programs.
HOOK for Cricut/Loklik Squeegee You need : 1x insert-empty inserts are here : https://makerworld.com/en/models/22521#profileId-27457 Optional: For a better result, you can apply an adaptive layer to the top of the hook. If you want to…
Squeegee with Bottle Opener: Perfect for glassing surfboards and opening drinks after hard work! Comes in two sizes: 120mm by 80mm and 160mm by 80mm, with different thickness options for various flex preferences. No 3D printer? JLC3DP…
Object description A set of circlips acc. to Seeger AK. Various sizes for shaft diameter 16 - 70mm. If you need another size, please leave a comment. A dimensional data sheet is provided in the downloads section. Update from 2025-03-24:…
ideal for 8mm glass or magnetic version with magnets 8*8*4 , model with pause for inserting magnets
Object description A set of circlips acc. to Seeger JK. Various sizes for bore holes diameter 16 - 70mm. If you need another size, please leave a comment. A dimensional data sheet is provided in the downloads section. Update from…
A simple hook that goes over the shower door frame to hold a shower squeegee. Print laying flat on one side.
Squeegee holder for Ikea Squeegee for shower. Happy Printing!!!
This is a holder for a windscreen wiper blade head. It accommodates those heads with approx 12.8 mm depth of metal. Such heads can be picked up cheaply, or you can use an old one after changing them on your car. I was dissatisfied with…
The original was just slightly too big to fit in a standard credit card pocket in a wallet, so I changed the dimensions to fit. Still the same thickness as the original. Now, 3.37in x 2.125in (85.6mm x 53.98mm) Recommended Slicer…
Combined this model with a visor mount i had made for another project. Not a designer by any means but it does the trick
A multi-purpose holder for shower brush and/or squeegee. Modeled to fit over a 2.5cm x 4.0cm metal frame, angled on the back side, w/ a small lip to ensure it stays put when items pulled off the hook holder. Sized to hold two brushes or…
It snaps on to 3 x 3 cm frames but can be scaled up or down to fit different size frames. It uses a 10 mm dowel to sit across the 2 holders. One needs to be mirrored in the slicer to work.
A fully parametric shower squeegee hook to hang your shower squeegee on your shower glass. Thanks to the curve of the hook, the water flows away naturally and never stagnates. Must be printed on the side, with support. Print as it is. How…
5x1 through 5x6 base grids. The most important thing is to make sure your magnets have the same orientation throughout the whole system. More about the FreeGrid system and FreeCAD tools to build your own modules is available on our…
Squeegee is printed with TPU, the handle I used PLA. I printed the handle on its side with supports, and it turned out okay. It was a bit of a tight fit to get the TPU into the handle, but once it was seated properly, it is very firmly…
Just a little fun project. Why would you buy something that you can make ;) The wiper and the handle will snap together. Just make sure you have arranged it correctly. The handle and the wiper holder are printed in PLA. The wiper is made…
Leopard 1 - Schneegreifer für Gleiskette im M1:10 Links auf dem Bild ist der Greifer in M1:8 gedruckt worden. Gedruckt mit einem Anycubic Photon Mono M5s
