Liczymy pasujące modele…
The nipples that came with the repbox didn't always hold on to my PTFE tubes very well, and sometimes I came back to find the PTFE tube wrapped halfway around the spool (PTFE is very slippy, that is why we use it :P ) So I designed these…
Outer dimensions : 80.5 x 43.5 x 73 mm Inner dimensions : 73.1 x 36.1 mm Warning : check the dimensions of your power supply before printing. As you can read in the comments, Stepcraft provides different sizes of power supplies.
Consists of 3 parts but doesn't require any tools. To place it - Grab a panel piece by the sides, line up the long clippers with the holes in the case chassis and then push until it clicks. Then push every side until it sits properly. To…
Outer dimensions : Height : 80mm
I recently brought an AcePC T11 mini computer that is fanless. The problem is that it's cooling system is absolute rubbish. Even under moderate load the CPU would git 80+C causing the frequency to drop. I made this model to replace the…
Uses 4 6mm nuts and 4 6mm x 14mm socket head cap screws
Build your own IoT NeoPixel lamp inspired by EPCOT Spaceship Earth! Use a QT Py ESP32 PICO, NeoPixel BFF Driver and WLED to make amazing lighting effects! Designed by Noe Ruiz for Adafruit Industries Learn Guide…
Here I have recreated Spaceship Earth. It consists of a geodesic sphere consisting of 980 polygons subdivided into 3 triangles each, with the center point pushed outwards slightly, perched atop 3 legs and a center base. I have provided…
Wife needed this as a planter so I hollowed it out.
I modified the Spaceship Earth model to hold an Amazon Echo Dot (2nd gen). Holes were added to let sound out of the bottom mounted speaker and a hole was added to access the USB and audio jacks on the back side. To align the cover with…
Remixed from: https://www.thingiverse.com/thing:3084118 Credit goes to SnickerdoodleFP Hollowed out the above Spaceship Earth model to make a bowl to hold keys, jewelry, etc. Also printed in clear PLA to be able to stick an LED inside to…
Print with the rim of the half facing down, and pins if you want it to stay together. Add supports to the underside of the top of the dome, with a 0.1mm offset for the supports for less sagging on the bridges. Made in Blender, after…
Modified the base half of the original model to remove the center pillar. It wasn't structurally needed and created more points to mount LEDs to, because of that this project uses 162 NeoPixel LED instead of the original 156. The first…
This version of Adafruit's Spaceship Earth accommodates common 6x3mm magnets and adds the proper depth to the tabs so you can press-fit them in with some needle nose pliers. If you prefer not using tools, there's an optional 6.2mm model…
I'm a sucker for nostalgic prints and a big fan of the classic Epcot logos from the original pavilions. On a recent trip I realized they would make fantastic coaster designs. Since I couldn't find them, I made it happen myself. I took…
I replaced DeepCool CH160 glass panel with this design which replicates the 3.5mm squares on the rest of the PC case. I printed this on BL P1S and split the print down the center. I added butterfly clips which are used to keep the two…
Assassin IV gotta be one of my most favorite CPU air coolers, and while it looks and performs great in stock config, I don't mind having more fans. The bracket that comes with it works, but it detracts from its appeal. So, I've designed…
This is my version of the Repconn A3 Rocket which is shown in Fallout New Vegas as they leave for the Great Journey. Modeled in Fusion 360. Minimal supports, but use a brim since the fins need to be stable for a successful print. Print: 1…
The adapter is printed as four identical parts . Two of them must be mirrored before printing. After assembly, you end up with one adapter per CPU socket corner . Printing Quantity: 4 parts total Mirroring: 2 normal + 2 mirrored Result: 4…
Hi, this is a big stop angle for mounting on the Stepcraft Q-Series aluminium table. It´s made for M6 Screws and is very flexible to use. In total it measures 120 mm to 120 mm with a hight of 20 mm. Nice detail is the small Stepcraft…
This honeycomb front panel gives your PC-case higher airflow than the standard glass-panel.
Dust shoe Kress 1050 FME-P Update 01/23 - posted STEP files on request. The Kress 1050 FME-P has the ER-16 Collet system and therefore the clamp nut has a diameter of 25mm instead of the 18mm on the normal Kress. So, the old dust shoe I…
Although the Stepcraft CNC Routers have decent protection of the gantry rail by the rubber flaps, I had the issue of chips entering. These chip guards cover the part were the rubber separates when the gantry moves. Print the part straight…
Eine Absaugung für die SepCraft Fräse und ein Staubsauger mit einem Rohrdurchmesser von ungefähr 44mm. Für den Zusammenbau benötigt man eine M5x30 Schraube so wie eine M5 Muttter.
When Donald, Jose, and Panchito took over the boat ride inside the Mexico Pavilion in 2007, the famed caballeros' faces graced almost every surface of the ride's landscape. That included in the papel picado that dangle above the boats as…
Hi, this is a small storage rack for 6 collets, type ER20. It´s made for the Stepcraft Q-Series, but it fits for all ER20 collets. Nice Detail is the small Stepcraft Logo. Have fun, Köter
These are quarter-sized tokens representing each of the pavilions at Epcot when it opened in 1982, including the Odyssey and main Epcot Logo. These are small and detailed. I printed with a 0.25 nozzle on a Revo 6 hotend (highly…
Which collets will fit? 401E (OZ8), DIN 6388A Found in spindles/routers from Kress, AMB, Isel, Mafell, Stepcraft Each position will accept collets with or without nut attached (tested with Kress/AMB nuts) A short type 17mm-spanner will…
I wasn't happy with either the looks, or airflow of my DeepCool CC360 PC case, so I designed this replacement. No glue, or screws are required for assembly. The front plate is made of 2 halves. Each of which is made of a 3 piece…
Figment is a small, purple, dragon-like creature who serves as the beloved mascot of Epcot's Imagination! pavilion at Walt Disney World. Created specifically for the "Journey Into Imagination" attraction (which debuted in 1983), Figment…
the logo of EPCOT from disney world, its 4 pieces, you can snap the white parts in the grey parts so you dont need a multicolor printer. You can scale the model if it does not fit your printer, currently needs a 220x220mm bed.
Wall mount for Black&Decker STC1840EPC The wall mount is in 2 parts (one for each handle) and 3 washers. There are 3 conical washers to prevent cracking of PETG when tightening the screw
Contemporary Resort Epcot Center Disney World
This is a 3d printable replacement for the Stepcraft vacuum adapter for HF500 spindle made in 2019. In my case a Stepcraft D840. I was having clogging issues with the original one when cutting MDF so I redesigned it to make the internal…
This is a holder for a Roland type dragknife in a Stepcraft cnc. Two parts are printed, the 43mm cylindrical holder for the Roland dragknife and the screw down clamp that keeps the dragknife in the holder with some spring pressure. These…
I printed with these using PETG, without any support but with a mouse ear brim since those were the easiest to remove.
Hi, this is a small stop angle for mounting on the Stepcraft Q-Series aluminium table. Nice detail is the small Stepcraft Logo. Have fun, Köter
Hi! I got my cooler used, so i threw this bracket together. The foto looks diffrent because i didn't bother putting newer version on.
Didn't want to cut the factory cover, so made this one. STEP and 3MF available. Feel free to change or whatever, I don't care.
GPU Holder for DeepCool Matrexx 50 PC case. Rafts: No Supports: No Resolution: 0.2 Infill: 20% Parts: 2x M3 bolts
This tiny thing covers the open axles on a Stepcraft series D CNC machine. I really like the machine but hated the open axles, so I did something about it. It's a pressure fit, so you can remove if needed. Print Settings Printer Brand:…
Stepcraft has stopped selling their dust boot... so I made my own. Same magnetic lock and retraction features as the stock model. Sorry in advance for the mix of metric and imperial units but I am an American so buying metric is hard…
Meu primeiro modelo então haverá falhas, caso queiram fazer melhorias fiquem à vontade. tentei fazer uma textura mesh mas não consegui e nem furos para parafusar, caso consiga eu adoraria. Fiz aberturas para imãs de neodímio 6x2 mas não…
use m4 heat threads (D6xL8) Use with cooler fans of the 9225 series
An EPCOT Mickey ear for your trip to Disney. Meant to be interchangeable with most 5 magnet Mickey ear models and headbands.
Simple print for making a custom pair of mouse-ears. Simply print and hot-melt glue on-to a head band. Category: Costume
The Deepcore GK2 and its accompanying mag.
I built a PC using the Deepcool Matrexx 50 case with RGB fans ( https://www.canadacomputers.com/product_info.php?cPath=6_1937&item_id=139452 ) , and noticed there was a large open space on the top of the fan bank on the front. Did not…
Stepcraft M 700 transformer holder
This is a small upgrade for the Stepcraft 600. You can add this for added stability. I'm using a roll able table, so it's good if your CNC don't fall down. If you like to, check out my other designs too!
A 3-pieces kit to properly mount your BC250 into a DeepCool CH160 Plus PSU relocated to the bottom of the case 120mm or 140mm fan installed right in front of the BC250, pushing fresh air directly to the VRM and PSU connectors Active VRAM…
A simple model that I made in Solidworks for one of my favorite Disney Logos.
I tried out many different concepts from the internet but none of them was suitable for my machine. So I designed a system from scratch and am very happy with it, feel free to modify it ( .f3d and .step files are included). Please tell me…
These are basic feet meant for the cool Deepcool CH160 case where you can make it stand. Multiple designs are available. Express your own base design at this link
This spacer is meant to increase the airflow into the pc case while allowing the white front panel to stay on. Super quickly modelled and can definitely be improved, but it works for me.
Hauptkörper gedruckt in PETG Besen gedruckt in TPU (Druckrichtung beachten, da der Kopf Halbrund ist) Besen 2 mal drucken
Base verticale pour boitier PC Deepcool CH170 ou CH160. Ce model permet une meilleure ventilation, ici il y a des prises d'air sur chaque face, vous pouvez également ajouter un filtre à poussière (ou a objets si vous avez des enfants) que…
Hi, here you can find a little storage for the TS-39 tool length sensor from stepcraft. There are two models: the storage place itself and a t-nut with a M3 thread for fixing it. You´ll need an M3 screw to fix it. With this thing, your…
My KeepCup had a cork band around it. You are not meant to remove it or fiddle with it too much, but I like to live dangerously and, as a result, I broke it. You can buy a replacement on their website for 5 dollars, but that would have…
3D Model: DeepCool AN600 Adapter for AMD BC-250 This 3D-printable mounting solution allows the installation of a DeepCool AN600 cooler onto the AMD BC-250 motherboard. Installation Hardware: Bracket Requirement: This adapter is designed…
To avoid Spindle cable and dust hose (original SC parts) entangle or get in the way, You can clamp them together. I applies 4 clamps on my Stepcraft D840 machine. Combined Cable/tube support mounted on the the Z-axis steppermotor, the…
Performance Kit Modify
Looking for a fun way to show appreciation to the wonderful castmembers? We've designed these “Challenge Coins” as a fun way to express our gratitude to our favorite cast members at every park. Featuring the memorable designs of out…
This bracked mounts to the Z-axis by using the existing screws next to the Z-axis motor. Works great with the cable dust hose clamp https://www.prusaprinters.org/prints/89387-stepcraft-d-series-spindle-cable-dust-hose-clamp Added v2 that…
It's a modified fan shroud for Deepcool Assassin 4 cooler made by Skagger. Now it is a back side (intake/exhaust, your choice) fan duct, you can split it and resize it in Z dimension with Fusion to fit your PC Case, it's 66mm to fit…
If you have a Stepcraft CNC you know how easy it is to switch the spindle for another tool. This alignment tool fits in place of the spindle and is the easiest alignment tool to print. You've probably seen the others I have designed and…
This is a lower profile fin stack cap to replace the original cap on the Deepcool AK400 CPU tower cooler. Using the AK400 in a Cooler Master NR200 case, I found that the pre-installed fin stack cap adds an extreme amount of unnecessary…
Mounting bracket for the Stepcraft M1000 CNC Power Supply.
A custom top cover/faceplate for the Deepcool AG400 and AG400 MAX CPU(may fit others) air coolers. It fits securely over the top of the heatsink while maintaining full airflow and fan performance. Features: Precision-fit dimensions for…
Pinboard inspired by Spaceship Earth at EPCOT For every EPCOT loving Disney pin trader! There are 2 versions of the legs, one for hanging the board on the wall and another for a free standing option. There is a nail hole on the back for…
Bay Lake Resort Epcot Center Disney World
Klíč k vytažení bezpečnostní krytky elektrické zásuvky.
Keep dust hose en HF Spindle organised during machining. Combined with de Spindle/ dust hose clamp, you get a possible sollution to avaid they get entangled.
This is a front panel for your Deepcool Tesseract case. The only functional thing it provides is the capacity for 3x 120mm fans or a 120mm / 240mm / 360mm water cooling unit. It also looks somewhat good, especially with inlet cones . You…
Spindle adapter 1500w for cnc Stepcraft
This is a NeJe 20W Laser and tester control box. The NeJe Laser pakkage include a test and control board. But to leave the PCB without a housing isn't a good idea. So I decided to make a control housing for it. Because I own a Stepcraft…
Hi, here comes a small cable clamp to fix cables on the top of the q-series enclosure. greetings, Köter
Suggested material: TPU or TPE, as soft as you can print. Layer: 0.2 Infill: doesn't matter. Use silicone glue to attach the landing claw to the protector. !! Do NOT use sanitary silicone !! It's not meant to attach things together.
A frame/display for epcot passports. One for just the passport and one where you can also display the festival magicband. Print Settings Rafts: No Supports: No Infill: 20 Category: Decor
The bottom cover is open (without a solid base) with feet for improved ventilation, which reduces the overall case temperature. The feet have notches designed to hook onto the bolts of a VESA mount. I was off by a couple of millimeters on…
This is a clip for keeping the tubes parallel for a DeepCool LS720 AIO cooler. I believe it would work for any AIO tubes with an outer diameter of approx 12.5mm. Printed with PETG.
A holder for devices that fit into the Stepcraft 43mm diameter spindle clamp. Fits 1/4" pegboard holes spaced 1" apart Initially I thought it would be for my HF-500 spindle but its a bit heavy and the cable is quite thick. Up on a…
Specifically for use in the DeepCool Matrexx 50. Use two case screws to attach the bracket through the SSD drive holes location as shown in the pictures. Its a good case for the money, but the screw holes strip out easily, and the back…
this is a laser holder for 43mm stepcraft tool holder. its suitable zbaitu ZBT-LD80W-FF45 pro 80w (10w optical ) also fit laser tree LT-80w LE and size about 40x40mm when you slice the model you must use zero solid layers top and bottom.…
Cooler cover for DeepCool AG300 to look less ugly :D NO SUPPORTS LOGO FACE DOWN MADE FOR THIS DUDE
In unserem Motoradanhänger habe ich vorne aus 20 x 20 mm Profilen ein Regal gebaut. Ganz unten im Regal hängen meine BMW GS Koffer - Sie stehen auch auf dem Boden auf. Die Haken aber sind für die BMW-GS Koffer auch passend an die…
A standoff for the DeepCool MaCube 110 that allows you to ditch the plastic air-restricting mounting plate. Printed setting don't matter too much, just make sure not to use excessive infill so the peg can slot into the case by bending and…
The Living Seas ride Epcot at Disney World
BMW S1000RR Hepco & Becker sportrack mounting clip (2019 - 2022) Unfortunately the sportsrack mounting requires the bracket to be bolted to the rear subframe which whilst secure is inconvenient. This bracket bolts to the underside of the…
These adapters fit the Stepcraft spindle bracket and will hold a 7mm spring loaded diamond tip engraver tool. Dial indicator 3mm (1/8") engraving tips 12mm linear bearing for a 12mm collet chuck extension that will hold various engraving…
Wanted to remove the semi-infinity style RGB cover for my AIO pump on my DeepCool LT520 AIO in my testing PC, so I measured out and designed a simple pump cover. Deepcool has a proprietary AIO pump from what I researched, so it may fit…
Customized version of http://www.thingiverse.com/thing:671884
This is a suction hood for my Stepcraft 2/600 mill with a Kress 800kfme. The design is for a 25mm suction hose. The orange plate is the Stepcraft plate holding the mill. This doesn't need to be printed ;) You will need a 25mm suction hose…
This 3D model accurately recreates the classic Epcot Center logo used from the park's 1982 opening until 1994. The design prints at a uniform 8.3mm thickness with raised text. No AMS system needed. For multi-color printing, simply pause…
Wind-up key for Pepco cat toy mouse which sells only for 1.3 EUR / pc. but without the wind-up key. Might be used for other wind-up toys with a 3.5mm*3.5mm square shaft. No supports needed.
Régi Orosz BC Káma szivattyúhoz kelepce, turbina, lapát, Kama pumpa za vodu
I picked up a DeepCool Gamer Storm cpu water cooler at the thrift shop that was missing the mounting brackets so I made these. I installed them and ensured proper alignment but unfortunately the water cooler didn't work, so I couldn't do…
Ein neues Magazin für Stepcraft CNC Maschinen welche einen automatischen Werkzeugwechsler mit SK15 verbaut haben. Sofern man den Absaugschuh verbaut und das originale Magazin verwendet, schmeißt die Maschine beim Werkzeugwechsel die…
