Liczymy pasujące modele…
"As a 3d printing nerd, one doesn't buy plastic things one can design and make" The only plastic I buy now comes on spools. So I hit up Fusion 360 and made this little guy. THE NEED++++ Was getting hangups on my magazine changes on the…
NOTE: This design is a WORK IN PROGRESS, I don't have any ER collet holders so I don't know how viable this design is. I take no responsibility for any accidents that may result from using these 3D models. ER Collets are often used on…
Simple 8mm film reel. I modeled it after the autoloading reel that came with my projector. I cannot guarantee compatibility with other models of projectors, but I attached an editable .step file so the model can be easily remixed. The…
DIN clips for the Monster8. Fits both V1 and V2 MCU boards. Uses less plastic than stock DIN mount from MKS. Can be printed on a V0's tiny bed. Requires 4× M3-threaded heatset inserts, 5mm diameter, 4mm height. Print two copies of the STL…
I upgraded my cheap chinese CNC with end swithes following this design: https://www.thingiverse.com/thing:2796202 But standard brush motor produces so much noise, that inputs of GRBL controller board was triggered immediatelly when motor…
This bracket allows you to mount a ER6 or ER8 in places where double sided tape may not be reliable. An STL file is included If you want to tweak it using OpenSCAD: Using OpenSCAD download OpenSCAD https://openscad.org/downloads.html open…
On the original basis, a 4010 fan is added to cool the CPU of the motherboard, and a 5015 fan (Voron model cooling fan) is used for driving heat dissipation. I designed an independent air duct above the drive, and the 5015 fan needs to be…
Modified and built for SER8.
3D Holder for Beelink SER8 – Monitor Mount This is a custom-designed 3D holder made to securely mount your Beelink SER8 mini PC to the back of your monitor. It helps keep your workspace clean and organized by hiding the PC behind the…
BOM Name Quantity M2x10 Self Tapping Screws 4 pcb_din_clip_x3.stl 2
This is the driver cooling solution for the Super8 Pro motherboard, using a 5015 fan (Voron model cooling fan). I designed an independent air duct above the driver, and two M3 heat-set inserts are required to be installed in the 5015 fan.…
These files allow someone with a Wolverine (or similar) 8mm / Super8 film to digital scanner to use larger film reels on their unit. The largest mine could use was a 5-inch reel and I had a number of 7-inch and 9-inch reels that needed…
Brackets for mounting a Mellow super8 to the Voron din rail mounts
A simple bracket model to allow for under table mounting of the Beelink SER8 Mini PC
Dimensions: 150 x 130 x 29mm and 150 x 64 x 29mm for the halved version Fixed issue where stl models were 10x smaller
A remix adding length and a "notch" to grip the spool. Category: Parts
I designed a 3D printed exhaust port filter for industry RU standard Honeywell / North cartridge respirators. I have a RU6500 Full Facepiece Respirator that comes stock with N95 Pre-filters that snap over the cartridges. Early on in the…
Saw the MKS Monster8 Fan thing by pbnico, but I didn't have the size fans that's being used. I had a lot of 80mm fans from my old PC build, so I remixed it to utilize one of them. Just putting this out there for others to use also Print…
The Wolverine F2D Film Digitizer handles up to 5-inch reels of 8mm or Super8 film. This allows you to use 7-inch reels. I saw other setups here and found them to be complex and require bearings, wood, screws, clamps etc. This one uses…
Replacement press-foot lifter lever for Singer type 875 sewing machine. (Beware, the Singer 875 sold in Middle-Europe seems different from Singer 875 sold elsewhere. In German speaking areas it is sold also as Singer "extra 155") Print…
a bunch of muzzles for https://www.thingiverse.com/thing:4713483 or my rear load remix. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Other
Allows mounting three 40XX fans (40mm fans of any thickness) to cool stepper drivers, as well as the MCU, on an MKS Monster8 board. The fan mounting holes are designed for heatset inserts, and there are also through holes for zipties and…
Hey folks, I recently purchased a Beelink SER8 and needed something to attach it to my VESA compatible display stand. Since there was nothing around to buy or directly print, I reckoned I'd design one and print it. I chose VESA 75 since…
Raspberry Pi + Mellow Super 8 Pro + 4xHV-5160 external drivers. Added ductwork after testing mounting and grip. YMMV the fans I'm using are snug and haven't come loose. I'm sure someone smarter than me can make it better. Zip tie mounting…
buymeacoffee.com/est_makes_things If you like this model, please consider supporting me! Thank you!!! 😊 ---------------------------------------------------------------------------------------------------- Cyber8Bit – a Retro 3d Printed…
A Innsmouth citizen ver8. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Creatures
Here's a box to organize an ER8 collet set. Use 4 screws: M3x30 for the hinges and latch. Base : 20% infill, no support Lid : 20% infill, tree support to base only. Block support the screw holes. It's just he couple spots for the hinge…
Bambu labs PLA Matte - charcoal w/ Flashforge HS PLA - ruby red
Please check the original model for BoM, spacers, additional parts, and printing recommendations. You will need two additional screws and spacers (found in chirpy2605's repo)
Clip to hold Clutch cable to frame
I've been digitizing old home movies and needed an adapter between the Super8 50' film reels and the digitizing machine I am using. Tried some other models but none were quite right, so modeled my own.
This is an adapter for Super 8mm film viewer Goko G-2002 Dual-8. Adapteur pour visionneuse de film super 8mm de marque Goko G-2002 Dual-8 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2…
Fits with original Screws and self printed... NOTE: use model "Hager80SL_TEST_Gewinde.STL" from https://www.printables.com/model/1121096-hager-haubenturm-40mm-80sl-f82n and print a "Test thread", to check print parameters for best fit of…
1:1 Nachbau der originalen Einfädeltaste
These are sprockets for 8mm film, specially designed for the T-Scann8 scanner. They are designed for a 5 mm D-shaped shaft. Be warned: they are nearly impossible to print, the teeth will most likely require post-processing to turn out…
I designed this panel to mount inside a DSC Power832 panel. I took out the old DSC electronics and converted my home security system to use ESP8266 boards. This panel lets you mount the ESP8266 chips inside the panel to re-wire the…
Hardware Needed to Install: 1) Hex Socket Head Cap Screw M3x40 - 2pcs 2) Hex Socket Button Head Screw M3x14 - 2pcs 3) Heat Threaded Insert M3x4.5x5 - 2pcs 4) Cooling Fan 4010 24v - 1pcs 5) Blower Fan 5015 24v - 1pcs
Dieses Teil wurde modifiziert um ein ausbrechen des M3 Gewindes für die Umlenkrolle zu verhindern. Außerdem hat es im Filmkanal eine eckige Aussparung für die Aufnahme einer Reflexlichtschranke DY70. Das Kabel für diese Lichtschranke kann…
I used t4deusz's design ( https://www.thingiverse.com/thing:2665470 ) and it works. I did find it annoying to use with my Ant however. So I made a wrench which is a bit longer and has thinner edges so it can fit between the Z-axis holder…
MKS Monster8 v2 + 4 Fly HV 5160 mount + 4 4010 fan
A VESA bracket that gets your Beelink SER8 Mini-PC off the desk and onto a monitor arm. The mini PC sits in an open cradle rather than being clamped or strapped, so it drops in from the top and lifts straight back out — no disassembly…
This bracket allows you to mount a ER6 or ER8 in places where double sided tape may not be reliable. An STL file is included If you want to tweak it using OpenSCAD: Using OpenSCAD download OpenSCAD https://openscad.org/downloads.html open…
Clean and functional storage solution for ER8 collets with a hinged lid and magnetic closure.Designed for everyday workshop use with a focus on precision usability and printability. Features: -Holds multiple ER8 collets (organized and…
