69 modeli
This is a jig for Bosch 1617EVS fixed base plate to cut a grove in 2 “inch” side of 2x4 or 2x3, and by “2” “inches” I mean 38.5-ish mm. The max acceptable “2” “inch” side is 39mm. I gave the jig tolerance of 0.5mm which is a lot for a 3d…
Wydruk około 6,48 €–7,92 € nettoWstępna wycena jednego wariantu
Digital 3D model of Durmstrang Institute of Magic wand (Whole/Parts) Classic . This model is a fan-made replica of the wand from Harry Potter. The files contain the whole wand + wand parts + connection screw in STL. This assembly system…
This is a base plate for the Bosch Colt PR20EVS palm router (trim router) that takes standard 1-3/16" template guides. I tested using the Lee Valley Veritas template guides. This model is designed true to size and I use x/y shrinkage…
This set of “executive-size” (45mm) checkerboard squares is a simplified, frameless variant of Martin_au's larger modular modular tournament-size board . Interlock any number of squares to create a custom checkerboard grid. Common…
The original model by Thingiverse user mattcoon was a great start, but I wanted to improve their f3d model to have cleaner geometry and less air restrictions. I eliminated internal overhangs that would not print super clean without…
Model of a super charger in scale of Ho / 1:87 Printed in PLA, Powerline made of a string flexible filament.
I printed the Wall j1772 Holster by Falcon64 but I found out that the latch on my Morec EVSE didnt quite lock on his, it needed to be wiggled to catch and wasn't reliable for this EVSE. The Morec 32 amp evse I bought came with a wall…
This variation provides a pretty good fit to the “window” on the RA1161 base. I moved the plastic piece that Bosch provides to cover that window to the other side of the base. Slipping the cover behind the height adjustment shaft is a bit…
A tool mount option for the V1 Engineering LowRider v3 CNC (LR3). Hardware changes are necessary to accommodate.
Chevy Bolt Charger remodeled the bottom holder to eliminate the need for supports or bridging
When eVscope is collimated, this tool is placed top of phone or iPad screen. The unfocused star is a ball with cross of telescope camera support. Tool is used to confirm, that the cross is middle of the star and there fore the eVscope…
Bust of Vasil Ivanov Kunchev (Vasil Levski) Bust of Васил Иванов Кунчев (Васил Левски) Print settings: 0.12mm 2-3 perimeters 4 bottom layers 20% lightning infill tree supports if needed
That's a multi-color model I made for a friend who likes football/soccer (unlike me :D) I think that I've glued the parts together, but really can't remember… Multiple files for different printing configurations.
Fiodor Mikhaïlovitch Dostoïevski – Buste Description (Français) Ce buste représente Fiodor Mikhaïlovitch Dostoïevski, écrivain et penseur majeur de la littérature russe du XIXᵉ siècle, dont l’œuvre a profondément marqué la philosophie, la…
Mayevsky’s key — a small tool used to manually release trapped air from a radiator (usually in heating systems).
"Shotgun" Shell (for 1 - 2 Short Darts or 1 Elite Dart) >>> [ no inline clip! ] for the X-Shot Micro2.0 Reshell 7 and Reshell 5 by Domochevsky Rear loading is possible so you also can leave the shell in the blaster to load it directly…
Bosch Palm Router Circle Cutting Jig (Small Radius Capable) This is a custom circle-cutting jig designed for a Bosch palm router, with a key improvement over most existing designs: it allows the pivot point to sit directly underneath the…
Simple hand wrenches for the Dewalt 660, 611 and Bosch PR20EVS routers works well with 2.5 inch endmills and v bits. The tip of the tool needs to be smaller than the nut. **Dec 2, 2020 updated fit and added .25 inch bit shank holder.…
Battery backpack that clips onto the arm of the Unistellar eVscope 2. Should work with other models if they have the same dimensions of the arm that the eVscope 2 has. This allows you to provide USB power to the scope that travels with…
eVscope telescope solarfilter holder With print you need also solarfilter: https://www.amazon.de/-/en/Baader-Planetarium-AstroSolar-Filter-Observation/dp/B002SYD2EM/ I laminated the filter which protects it from scratches and accidental…
Iron Sights __ X-Shot Micro 2.0 Reshell 7 Hammer-Action Iron sights to replace the Picatinny rail of the X-Shot Micro 2.0 Reshell 7 The Iron Sights are simply inserted, just like the original Picatinny rail, and then secured with the…
I hated trying to find a safe place to set my dust caps down when using my eVscope. I created this cap holder to snap onto the tripod leg of my eVscope, this gives a handy place to put the caps while observing. Needs to be printed with…
Micro 2.0 Reshell 9 by Domochevsky ___ Mods A few minor mods for the new Micro 2 Reshell 9 by Domochevsky : Fake threaded rod sleeve for easy fitting over the blaster’s Axis rod (fits all versions). A Picatinny rail has been added beneath…
Wall mount to hold stock EVSE part# 85720051. IMPORTANT NOTE: I do not own this EVSE so have not test the fit
Clip for EVS EPIC kneepad TPU printing 100% filling With stand
It is Levski Sofia keychain
The Bosch 1617EVS has one flaw that many people run into. When mounted in a table and using the hex key to raise or lower it from the top through the hole in the mounting plate the snap ring can pop loose from the groove or even pop…
Freevs39 - Movie Them Party cosplay Mask 3D STL Free
For venting air from water heating systems
The bosh is 3.5" Diameter this will reduce it to 80mm
I printed it out of PETG, it has been installed outside all winter (in Québec) and is still in perfect condition. It probably fit other EVSE models from Kia and Hyundai. Mounted to the wall with #8 screws.
I broke my type 1 plug locking latch, there was bad molding behind this as i don't possess that kind of strength in my arms to pull that latch out without opening it first. This lattch is for Duosida EV charger model nr.…
This hot-end can be bought from AliExpress ( Hyperlink ) (does not cost $9, select V6 option) Please be responsible with the files, Design is based of measurements based on a purchased product and verified with photo-metrology measuring.
Need to print each piece. One has recessed holes for the bolt head and the other for the nuts. EVSE Cord Clamp. It uses M3 bolt and nuts to hold the two havles together. I uses expoy to make the inside of the wire channel extremely smooth…
a router base plate for a Bosch MR23EVS router. I needed a bushing and didn't want to buy the whole kit. It should be a standard 3 hole pattern for other routers as well. The holes are still off by less than a millimeter but it works…
"Embark on a voyage into the abyss of existential mystery with our FyodoMark. Echoing the enigmatic essence of Fyodor Dostoevsky's profound narratives, the FyodoMark invites you to traverse the shadowy depths of the human psyche. Each…
Cosmetic bits for the Domochevsky M2R6 - https://www.printables.com/model/1385301-x-shot-micro-20-reshell-6-mag-fed-variant-v12 Use M3 heatset inserts (5mm OD, 3.5 or 4mm depth) NOTE - Some parts need to be mirrored in your slicer (since…
Follow Bikeyoke installation guide for your seat post model https://bikeyoke.com/travel-spacer-set-8mm-kolbenstange/revspac
This is a custom designed case for holding electronics of Smart & Simple EV charging station's sensor. The case is ready to be used on metal and plastic DIN rails, clips are exchangeable, top (side) cover is held in place by notches. Clip…
permet de se fabriquer à moindre coût un filtre solaire d'Evscope, seul reste à acheter le film solaire sur un autre site de style Aliexpress ou autre. Le film solaire se coince entre l'adapteur et le couvercle. la dimension du fut de…
Camlock Vacuum Adapter for Bosch GOF 1600 CE / Bosch MRC23EVSK Router. Snug fit without the need for PTFE tape.
"when life gives you lemons instead of a glovebox" This is a simple document holder that you can stick with command strips under the armrest cover of current Toyota and Subaru EVs. This should be a simple print, orient with the bottom of…
Supplementary mount for Brutus CNC
ESP32-EVSE is an exceptionally well thought-out diy EV charger (charge controller). This is a PCB mount to attach the esp32s2-evse-d-a board to a standard DIN rail. Use M3 screw insets to firmly attach to the board.
This shoe prevents your 1590EVS jigsaw base from scratching up your workpiece. You may want to hit the edges with some 220 grit to round them over slightly and soften the corners so they don't cause scratches. This is a work in progress…
I printed this with PETG with a 0.6 nozzle. Please don't use PLA so it's a bit more temperature resistant. I think the original box is polycarbonate.
A right angle elbow for the NOEVSBIG 8X Magnifying Desk Lamp to allow for the mounting bracket to be mounted upside down. I chose a high infill in order to give it strength. Printed in PLA, however, any material such as PETG or ABS should…
Dust port nozzle for Bosch 1590 and 1591 evs Part# 655 Suction Nozzle BSH-2605730040 This has a 27mm outside diameter hose fit, which fits my rubber Festool hose. I've also included a 30mm file for bosch hoses. I would increase the infill…
Big ah muzzle for the inline clip variant of Domochevsky's x shot micro 2.0 reshell. 100% cosmetic, it doesn't make the blaster quieter or more accurate, only longer (which was the goal) Total length of the blaster: ~ 19" THIS IS ONLY THE…
Dostoevsky - Crime & Punishment Sign/Placard , can be scaled up. Can be printed in multiple colors. No support needed. Example 2 color print project for Bambu X1C is included Script taken from Heritage Press 1938 title page.
fun joke to give to a customer when they ask you to deliver a DevSecOps Pipeline
Support imprimable permettant de poser une tablette sur un télescope eVscope Unistellar , pour un pilotage et une observation plus confortables. Je recommande d’imprimer la pièce en PETG afin d’apporter un peu de souplesse à l’ensemble.…
Accessories to mount an ESP32‐S2-EVSE-DIY-ALPHA board, RCM, CTs, contactor, and surge protector into a Tesla Wall Connector GEN2 box. In case the factory electronics are faulty, this can revive in an open source form! Parametric in…
Logo plaque, to be printed as a keychain etc. This is for EV owners group from Kent/UK. Or anyone who represents. I occasionally give these out to members attending our meet up.
An alternate grip for the Rail Spike by Domochevsky. Assembly is the same as the Rail Spike, but replace the following parts from the original model: Grip Scale R -> FlareSpikeGrip R Grip Scale L -> FlareSpike Grip L Grip -> Flare Grip…
I’ve created a few grip variations for the M2 Reshell series. They are designed to provide grip and look. You can print this file lying flat or standing up. Personally, I print the files standing up. Compatible Blaster: For M2r2…
Learn more about Braillest's embossing and repair process here . https://github.com/Braillest-Books/Crime-and-Punishment-by-Fyodor-Dostoyevsky
Decided to add some personal touches to my Revstars with custom cavity covers. Just making the standard file available for anyone who may need to replace a lost or damaged cover. The print in the image includes my logo (which I assume…
The Bosch 11230EVS has a selector on the side for choosing hammer drill or impact-only functions. The spring-loaded button to hold the selector in place can become damaged and fall out of the selector, which allows the selector to move…
Cosmetic bits for the Domochevsky M2R6 - https://www.printables.com/model/1385301-x-shot-micro-20-reshell-6-mag-fed-variant-v12 Use M3 heatset inserts (5mm OD, 3.5 or 4mm depth) NOTE - Some parts need to be mirrored in your slicer (since…
360 Go3 Mount for Empire EVS Paintball Mask *EZ Clip accessory required* Easily remove the magnetic base from the EZ clip and attach to this 3d printed base. 3d printed base pressure fits onto the mask/goggles. VideoLink Includes…
Bosch Palm Router Circle Cutting Jig (Small Radius Capable) This is a custom circle-cutting jig designed for a Bosch palm router, with a key improvement over most existing designs: it allows the pivot point to sit directly underneath the…
This is a base plate for the Bosch Colt PR20EVS palm router (trim router) that takes standard 1-3/16" template guides. I tested using the Lee Valley Veritas template guides. This model is designed true to size and I use x/y shrinkage…
Digital 3D model of Durmstrang Institute of Magic wand (Whole/Parts) Classic . This model is a fan-made replica of the wand from Harry Potter. The files contain the whole wand + wand parts + connection screw in STL. This assembly system…
360 Go3 Mount for Empire EVS Paintball Mask *EZ Clip accessory required* Easily remove the magnetic base from the EZ clip and attach to this 3d printed base. 3d printed base pressure fits onto the mask/goggles. VideoLink Includes…
