Liczymy pasujące modele…
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height no supports infill 15% rectangular infill 2…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
For the most up-to-date version of this design, check out the Makerworld version. It's the original threaded dragon egg, great for Easter egg hunts, gifts, and Game of Thrones fans. This is my made-from-scratch design from 2022 that has…
Honeycomb Wall parts I designed, I also created my own Screw Wall that is much stronger and many more available tool holders (over 300) check it out! Thanks for looking. Screw Wall now has over 50 Club subscribers! I also have created…
This set includes screws, nuts and washers of all kinds ISO 4017 DIN 933 With smaller screws and nuts, it is necessary to set the height as low as possible so that the screw works correctly for example at M3, M4 and M5 The screws are…
UPDATE: 2022/12/14 No changes in this update, just a big thank you to everyone that's downloaded, posted a make, remixed, or re-shared this model! This was only the fourth model I shared and was the first ‘big project’ I took on while…
Carabiner with lock that I created for study For greater strength, increase the number of walls. Normally I use four walls but I recommend using five or more. The use of supports is required in the parts highlighted in the image. WARNING:…
28/8/23 Added step file for battery holder to aid with remixes 2 versions, a single battery and a triple battery version. Prints vertically, no supports Important note on scaling As the fit of the battery is so precise I would advise…
Print, assemble and play directly, no screws needed 8-11
1.75mm filament clip with screw. One size fits most spools. 31 October 2022 update New body with tearshaped screwhole to fix issue with screw being too tight. Added screw model from second edition of filament clip. Second Edition…
Filament clip works on many spool brands including Prusament, Amazon Basics, Overature, Hatchbox, AMZ3D and others. Very simple design. Version 2+ , added March 15, 2024 incorporates slightly smaller filament clasps and reverses the two…
Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course. The following Makita tools have been tested so far in the 40mm version: Makita DTD171 Makita DDF484…
UPDATE: 15th September 2023 - Thank you all for the positive feedback for v3. I've now removed v2 as a result. UPDATE: 24th July 2023 - Whilst v2 was a lot better fit I understand some comments about smaller pieces going under the scoop.…
Simple functional M5 hexagonal nut and bolt Nut is scaled to 105% from ISO4032 Bold is scaled to 95% from ISO4014 Perfectly functional 3D print. Print instructions Parts Summary Simple functional M5 hexagonal nut and bolt Nut is scaled to…
6/10/2023 - 2.7 posted. Thanks to SuperRoach for pointing out the floating pieces in PrusaSlicer. With the latest PrusaSlicer RC1, it renders the bottoms of the gills on the left side of the head floating. That wasn't the case previously.…
I'm glad to introduce you the latest version of my cantilever tool box! Take all the necessary tools with you Easy to use and store Print-only design, no metal parts or glue required Clip and snap assembly Rigid and durable PARAMETRIC.…
You can now purchase screw/mirror kits at Kissner Optik . Official Discord server here. New instruction manual is here! See “other files.” I recommend the Hill Mount, Marci Mount or EMT remix over the one featured here. Wooden ones still…
This is openGrid, a general use wall and desk mounting framework/ecosystem. openGrid uses an opinionated design, focusing on ease of use and a clear structure for all the base parts. Still it is mainly meant to be extended by everybody…
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
UPDATE: ++ some Users had issues with the size of the 128 mm and 32mm axles therefore i upload 4 variants - small, medium, large, extra large. please choose which one fits better for you, depends on the calibration of your Printer. lots…
This collection regroups the models of handles for nuts and screws i designed over time. All designs can be printed without support, refer to the illustration to identify the different types. Bigger sizes up to M12 are available here:…
this system is fully compatible with standard grifinity models. Based on ZackFreedman design it screws together using 4-40 socket head cap screws and heat set inserts, with an optional 1/8 dowel pin in the center if you want to be truly…
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
Crisp lines for a modern look. Thin and lightweight, fast to print. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Notes: Optional: enable ironing for a smoother top surface Split objects manually by…
Important! This is a remix version of Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector for the new revision of AMS feeding funnel . There are several reports that such AMS units arrived to users from 08.2023 . Please check…
🇬🇧 English 🇬🇧 (In 🇫🇷 Français 🇫🇷 at the bottom of the page ) Ideal for your 3D designs, find 3D models of ISO M3 screws L4-L5-L6-L8-L10-L12-L14-L16-L18-L20-L25-L30-L35-L40 in .step files. and their washer and nut. Advice for 3D conception…
Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…
Among us crewmates don't have a consistent style, and of all the models that I found, non of them was spot on what I had in mind when I think about the Among us crewmates. So I decided to make my own. At first I wanted to make a realistic…
Note: Update available here: Pocket Screwdriver Kit v2 I picked up a pocket screwdriver kit similar to this at a tradeshow many years ago, and I wanted another one so here it is. The bits fit in snugly and the cover snaps closed. No…
Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap screws (M3-15 or M3-16) 8 nuts (M3) Foam rubber sheet with adhesive on one side. Recommended…
UPDATE: Sorry, I didn't realize I uploaded the “original” remix twice, the _medres file is the new sculpt. I was wondering why everyone was printing the old version. A remix of the ChibiGrim model. Added a base of skulls for Grim to stand…
Różne postacie znalezione na innych stronach, zmienione szczegóły w każdym i skompilowane w jeden kompletny zestaw.
This is a remix of the Rod and Tube Cutter for Dremel by GreaseMonkey88 on Thingiverse ( https://www.thingiverse.com/thing:4241055). But after printing I realized that it does not fit my Dremel 4300 (and possibly other large Dremel…
Screw and nut model by Ondřej Stříteský The model which we use on our promotional photos for Original Prusa MINI 🙂
Use case This screwdriver (bit holder) is made for fine to medium duty work. It is made to fit well into the palm of your hand, while still giving you a good grip for your fingers to apply some reasonable torque. Thanks to the clamping…
Super fun, Easy to print, Relaxing Gear Cube Fidget! This prints very easy and fast and just clicks in during assembly! How to assemble: Begin by putting all the pins into the core Put on the bigger gears on the bigger areas Put on the…
Flexi-Conda and Brick-Flexi-Conda If you like it --> press like it :-) Remix of my own Brick-Flexi-Gator model. The brick studs have an diameter of 4.9mm and at the head 4.8mm. There is a fast test file to check how the bricks fit. Works…
I really like maxwxyz 's Screw Claw , but I'm not fond of printing the thin screw holder fingers in the vertical orientation. I also wanted to accommodate a larger variety of screwdriver sizes. This redesign has all the flexing elements…
Why might you need this? Following my design of a top-mounted spool holder to allow my Creality K1 Max to print TPU more reliably I received several requests for a similar model to work with the K1 and here it is! This will allow the…
A Two Piece Rotating Table to help with painting models. No bearings needed, prints without supports. (approx 4 to 5 hrs on a Ankermake M5C , 10% infill). (Appears to be sturdy enough) can be used as a display. Sizes : - Top Plate/Table…
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
Template for equal distances on the stitch.
Just took delivery of my new Steamdeck and decided to design a storage tray to easily store your USB-C charger and MicroSD cards in the cavity on the bottom of the official Steamdeck carrying case that comes with the Steamdeck. The design…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…
Hey, since the cleaning with several paper towels has always annoyed me, I have designed this small but helpful tool. You just click it into the Lead Screw and move the Z axis completely. If the lead screws are very dirty, you can repeat…
Inspired by RJ Design's Impossible Vortex and Pyramid, but redesigned from scratch here with my own pitch, lobes and external shapes and models. ALL of these are my own design from OnShape with no measurements or copies or work taken from…
Often I found myself needing thumbscrews on my projects, and since M3-M8 are my most common used sizes i deceided to make myself some, and this is my Knurled version of my standard thumbscrews. The thumbscrews are designed for socket head…
Universal Ergonomic Screwdriver (Remix) This is an updated version of the popular universal screwdriver, focusing on improved ergonomics and an expanded set of collets. The main changes concern the shape of the handle — it now fits much…
!!! REPAIRED FLYING PARTS !!! CZ/SK Jedná se o model trojplošného letadla Fokker Dr.1. Jde o méně náročný model na složení. K dispozici jsou nové klapky (Flaps), při tisku buďte pozorní které soubory používáte (jsou označeny vždy buď OLD…
UPDATE!: I have revised the original Overture Spool Adapter based on feedback and experience after creating my Polymaker Spool Adapter. Version 2 of the spool adapter works just like the original except, I have added the small retention…
These are tool mounts for DeWalt cordless tools. They can be screwed into the underside of a shelf and fit to the battery female end of the tool. Print standing up. I use 3 walls, 20% infill, and no supports.
🐱Cute Flexi Cat Redesign🐱 This is a fresh redesign of my very first Flexi model, the cute kitty that so many of you fell in love with. I've kept all the charm and simplicity that made the original so popular, but gave her a little…
There already is a plethora of raspberry pi cases on the internet and the last thing we need is yet another one ... well - I created one anyway ... because I wanted to and I had a lot of fun doing it :-). I tried to achieve the following…
Update 17/09/2023 Added “HSW Ez-V1 Round Object Holder - 65mm Left” Update 29/04/2023 Added “Ez-V1” and “Ez-V2" hooks (14 files) which supersedes all other versions. These have been completely remodeled for improved strength, easier bed…
Now - here the brand new design of my articulated snake, which is not that spiky anymore. The joints are again improved. I added a the mini snake (also as keychain with 3mm hole) which you can use as a test file before a big print, if…
Note to printables staff : this is NOT a remix of a different model that doesn’t allow remixes, it is an original design of my own making where I invested significant effort. As proof, I am including the Fusion360 CAD files here to prove…
NEW VERSION 2 : link After releasing two print-in-place card wallets, I decided to take a different approach for my next design—this time, not print-in-place. I revisited the drawing board and developed a brand-new design with an…
Filament load/unload issues? MMU2 taking too much space? Not with this Universal Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to four full revolutions. The AMF files of the buildplates are included. The…
PROJECT PRESENTATION This project is a tripod allowing to maintain a phone in all possible positions thanks to a ball joint . The assembly is done without any screws , which however does not affect its robustness. The goal for me is to…
caliper size on the cover photo is 78.5 mm Someone posted on reddit asking how a helix screw toy was made but did not have a link to the STL so i reverse engineered it and made my own version. I added the full parametric fusion 360 source…
Filament load/unload issues? MMU2 taking too much space? Not with this Universal Auto-Rewind spool holder! It keeps filament on the spool during unloading, up to four full revolutions. The STL and AMF files are available for download on…
The Printed parts are created by Flashforge, I sketched DXF file of enclosure based on it. All panels are made of 3mm polycarbonate or acrylic panels Besides you need to cut the panels which are cut by laser or CNC cutter, you also have…
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
I was told that it'd be impossible to fit a ratchet mechanism inside a tiny screwdriver, let alone hold more than a single bit. This is to prove that person wrong ;) also check out the Print-In-Place version A reversible ratchet mechanism…
This is a standard camera screw, as included with most tripods. The knurled headplate is a real stress test for FDM printers. ;) Due to the tiny dimensions, I recommend printing it using the highest resolution/lowest layer height your…
Outer Dimensions: H: 44mm R: 38mm Inner Dimenions: H: 35mm R: 30mm Print Settings: 0.08mm Layer height 3 Walls 8 Top and Bottom shell layers 45% infill Fuzzy Skin with a modifier so it doesn't affect the outer thread → Contour with 0.3…
Updated modified design - big “groove” added on top side, so scredrivers sit in it and cant fall off when accidentaly hit. Universal comb type holder for various tools. Comes in two sizes for bigger and smaller tools. Big - 5 cut outs for…
Würth keychain screwdriver Introducing the Würth keychain screwdriver - Your Go-To Tool on the Go! Are you tired of fumbling around for a screwdriver when you need it most? Say goodbye to the hassle of searching for the right tool with…
Adapter folded from two parts to limit the use of supports DeWalt battery adapter You will need: 5x M3 - 15mm screws 2x male connectors and wires
This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…
Documentation & Assembly Guide - Please Read! I've moved much of the documentation here. Many of your questions are answered here (or will be answered) as I fill it out. READ DOCUMENTATION HERE Status updates April 22, 2025 Rendered STL's…
A 3D scanned statue of Mewtwo. Requires supports around the tail, hand and best case also between the legs. Printed with PLA at standard Prusa settings for MK3S at 0.2mm!
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Thanks to the awesome Delta P duct design by @teookie,…
Second edition of the 1.75mm filament clip with screw. 31 October 2022 update New body with tearshaped screwhole to fix issue with screw being too tight. Added screw model from original filament clip. What's new compared to original…
Update 6. Aug. 2023 The STL ist about an 1cm larger than what you see on the Lavazza photo. You can print it a little bit smaller if you want. Especially if you put you coffee bag into a Kellog's tin can as shown in the background. Update…
Print: On the side
inspired from commercial product, I tuned it to suit gutterman bobines but can fit with a lot of brand. to use in combination with a clip https://www.printables.com/fr/model/249327-pfaff-sewing-machine-bobbin-cover/comments/1177551…
Note!** June 13 2022 Version 5 Released. ** - Increased spacing and set back to accommodate the Larger 3 amp and up battery sizes - Added single and 2 unit shelves if you don't have 3 - added profile and snugged fit for better hold and…
Use the Skadis T-nut to mount different accessories to the IKEA Skådis board. The accessory will be firmly attached to the board and will not come loose when used, as can happen with conventional hooks. Is the threaded T-nut strong…
Made this to be able to put the bed back in place more easy and add a cable chain on my neptune 4 plus Thanks to: scrogathon & Matt Queen & Sascha and Berry C & Daan87423 They Helped me a lot for making the mount possible on the neptune 4…
The Revolver Born from a particularly frustrating weekend of printer maintenance, tinkering and DIY I bring you “The Revolver”. A fully 3d printed screwdriver for ¼" Hex Bits What started out as a fun weekend, slowly spiralled into…
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Torx screws according to ISO 724 , ranging in sizes from M2 to M20, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30…
3D Printable Screw Generator for Fusion 360 This is a fully editable Fusion 360 file designed to generate screws specifically optimized for 3D printing. Most standard metric threads are designed for metal manufacturing, not for FDM…
If there is any other type of screw/bolt you need modeled please message me
An organizer designed in two versions: a free-standing tree and one with a tray base. Recommended print settings: 0.40mm nozzle 0.20mm standard profile 10% gyroid infill Commercial License: You can subscribe for a commercial license…
This model was missing from Printable so I upload with credit to the original creator under Creative Commons.
A Dewalt tool holder that should work with most Dewalt tools that use an XR battery. This holder replaces the battery in the tool so that it can be mounted to a wall for easy and convenient storage. I currently use this to mount my 4"…
These screw holders hold a screw in front of a drill, and automatically release it once the screw head starts to enter the material. I recommend printing these from PETG or a stiff TPU e.g solid 68D Inspired and improved version of this…
The PocketDriver is a sleek and practical EDC bit driver designed to hold up to 4 bits within its body. Help me create more FREE models! If you like the stuff I create, consider joining my printables club as a supporter. It makes a world…
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: 5mm/s or lower…
New Version out now (metric and imperial) Keep your allen keys organized and turn them into a handy screwdriver! Head of screwdriver (black part) can rotate free for even more comfort. Note: You will need to warm up allen key with a…
Looking for a solution to reliably hookup CAN devices, fans, sensors and more to your beloved 🥰 VORON with a tiny bit of 😎 premium touch ? This custom skirt for CNLINKO LP12 (and compatible) connectors might be it! Why This Mod Exists…
Please give it a ❤ if you like it 🥰 Here are from belt tensioner for the Creality Ender 3 design to re-use the stock screws. Video talking about it (FR): Everything can be printed without support but some z-hop while moving may be…
Deutsch: Das ist ein Schleifpapier-Block passend zu den Schleifpapier-Rollen mit einer Breite 25 mm (1 Zoll) oder auch zum selber zuschneiden dafür etwas breiter in 300 x 40 mm. Für den leichten Zusammenbau benötigt man nur noch eine…
The 5 holders "tight" version is the most space effective. If you want more space in between, then the other versions are c.t.c. 40 mm like the holes in the Skadis board.
01.09.2025: Danke @GBorni von Makerworld für das Erstellen des gif deines fertigen Aperolinos in Aktion! Das zeigt doch sehr gut allen wie simple es dann abläuft! 11.11.2024: Stößelaufnahme mit kleinerem Durchmesser von -0,15mm für das…
Maj 30/06/24 : https://www.printables.com/model/927111-anti-pluie-piege-anti-frelon addition test piece anti rain hat suspension Part to test because no more printer working at the moment... fixing with petg wire as attachement Thanks in…
BEST PRINTED WITH PETG I modelled this in Blender while making sure it can function when printed. All you need is glue to glue the two hinge parts together while inside the handle and blade. It should take around 4-5 hours for 100% infill…
Get the other engines here ! Get the screwdriver here ! Build Video/Instruction Print the weights at a higher infill percentage to actually give them weight (I used 70-80% infill on the weights). This entire print is around 180g of…
![[Use M3 screws] Spool holder for Prusa MINI Flexible](https://media.printables.com/media/prints/62910/images/657225_6e3e876b-c636-4d75-9a4a-d73aa241cde4/ming-cheng-wei-she-ding-3.png)
![#0017 [Remix] X2 Delta P Duct [V2R2.2] for the MK3S(+) [New Flow Splitter]](https://media.printables.com/media/prints/155387/images/3720913_fbdbd996-a1de-4291-8b9e-a4c2554d6d73/mod2-and-3leds.jpg)
