Liczymy pasujące modele…
This is a quick remix of Josue's Flirc mount . I added 4 screw holders and removed the inner block to have my Pi fit into the case. I did have some print artefacts at the height of the screw mounts, yet my Pi fits fine and they are hidden…
This prints a replacement top for the Flirc Raspberry Pi case. The measurements are pretty much dead-on from an original plastic top, and it snaps in perfectly. I did make the tabs slightly thicker to make them stronger. This shouldn't…
The original Flirc case bottom plate gets sticky and degrades after a while. This is a printable replacement part. I filled the magnet holes that the original design had so it's just a plain bottom plate. Comes in variants with/without…
This is a bottom plate for the Flirc Raspbery Pi case to attach a Raspberry Pi to an Ikea Skadis pegboard . It uses Skadis T-Nuts for secure, wobble-free installation. Read more about the Skadis T-Nuts Mounting System and check out the…
This enclosure pairs a Raspberry Pi 4, housed in an aluminum Flirc case, with a 2.5” SSD. For more information on the Flirc case, please see: https://flirc.tv/more/raspberry-pi-4-case You can also find it on Amazon. The 2.5" SSD shown is…
Made this case to mount my Flirc Raspberry Pi 4 case to the wall. Of note, this does not replace the bottom of the Flirc case, rather the print is simply placed beneath it. To do this, just unscrewed the existing four screws from the…
I really love the Flirc case for the Raspberry Pi, so I designed this mount to attach it onto my Prusa i3 Mk3. To screw the case together I used two 4-40 x 1/4" socket cap head screws. To attach the mount to the printer I used two of the…
Stackable case for extra HATs to be added on top of FLIRC's Raspberry Pi Zero case. I've included three case models plus USB-brigde-cover (for Waveshare's Ethernet / USB HUB HAT): * TEMPLATE - this is a basic piSlice case template to be…
Español: Por aquí les dejo la carcasa para la cámara de alta calidad de la Raspberry Pi. La diseñe para que trabaje con la carcasa flirc. Pueden ver el video de YouTube donde la diseñe en SolidWorks y Fusion 360 para hacer una leve…
This is a back plate for the Flirc Raspberry Pi Case to mount it to a Prusa i3 frame . It works with the Raspberry Pi 3B, 4, and 5 versions of the case. There are different versions of the back plate depending on the case variant. Note…
Magnetic mount for Raspberry Pi-4 in Flirc case. My workbench was getting a bit cluttered, so created this to mount my raspberry pi's underneath. Requires 4 8mmx3mm ceramic magnets.
Replacement Flirc Raspberry Pi 4 bottom cover for mounting directly to Ikea Skadis boards.
I have a Pi 3B+ and got a gen2 FLIRC case for it a while back as I loved the passive cooling (at least the idea of it). I've been hemming and hawing about whether to mountn it to the frame or not (whether the weight up top makes a…
This stand/case keeps your controller nearby the pi zero for storage and charging. This is a remix from the below sources: https://www.thingiverse.com/thing:5156759 https://www.thingiverse.com/thing:3964539
UPDATED FOR 2024 - Now with rounded corners - Imported from my Thingiverse. Simple holder for Raspberry Pi Zero 2 W - can be glued to the 3D printer og to a wall for simple organizing.
This "Piggy back" mount allows you to attach a Pi Zero w2 enclosed in a Flirc aluminium case directly on to your Prusa mk3s+ Einsy cover. The Pi is connected to the Einsy board with 4 wires (+5, 0, Tx, Rx). The mount attaches to the Stock…
This package contains three designs (including all .stl, PRUSA Slicer, PRUSA MK3S g-code, and Fusion 360 source files) to mount a Raspberry Pi Zero in a Flirc case to a wall or backboard. These designs are for: Mounting on a pedestal…
A new backplate for the Flirc case for the Raspberry PI zero. This screws into the case instead of the factory backplate and has space to attach the case to the frame using T-nuts. This was made for the extrusions used on the Ender 3 but…
This holder was designed to keep my Raspberry PI 4 boards stacked firmly together while using the FLIRC case . All rear ports are accessible. However, top ports are covered except the USB-C. The reason is that I use my RPi boards in…
The Raspberry pi 4 runs hot. So hot, in fact, that it heat soaked my FLIRC case in the time it took to watch half a movie in Kodi. I dug around in my spare parts bin and found a 40mm X 40mm X 10mm heat sink and a 12v 40mm Noctua fan. I…
Raspberry Pi Stack for FLIRC case, with cheap USB 3.0 Hub and two HDD disk with external case. I've used cheap Chinese cases for HDD from Alibaba. FLIRC case is for better cooling of Raspi, Caution: If you plan on using the same usb hub…
Just added a dovetail to make it easily wall mountable. Probably best to print upright with supports. Dovetail is the same size as the original wall mount. Category: Computer
This was my idea to have an external cooling option for the FLIRC case. The power supply can be fed through the opening on the side where the camera cable exits. The design is in two halves so that no supports are required and the halves…
I wanted to print the cooler but i didn't have the right size fan to fit so i remodeled the fan case to fit a 35mm and it was short enough to fir in the case with good airflow.
This is to replace the Flirc top section of their case, I've added a raspberry pi logo as well as generally changing the shape of the design a little. You may find it a little loose, compared with the original I remixed it from, but this…
About This model is a small bracket which can be used to mount a Raspberry Pi Zero enclosed in a Flirc Case onto a tripod for camera projects. The bracket features a standard ¼ inch screw hole, which is the de-facto standard among…
The original case cover and base may become sticky or develop cracks after years of use. These parts are designed as replacements. Differences from the original design: The top cover snap hooks have been reinforced to improve durability…
This simple mod allows you to attach a Flirc Pi Zero case to any 2020-based extrusion (2040, 20-4040, etc) I used mine to attach it to an Ender 3. Print settings don't matter, but DO NOT USE ABRASIVE FILAMENTS! That means NO CF, GF, or…
Case mount for the Flirc Raspberry Pi 4 Case. No supports needed.
RPI Holder with flirc case for Ender 3 v3 SE. this is use with and adapter
The original case cover and base may become sticky or develop cracks after years of use. These parts are designed as replacements. Differences from the original design: The top cover snap hooks have been reinforced to improve durability…
I wanted to mount my Flirc Raspberry Pi 4B Case to the wall so i decided to create a custom mounting model for this case, could be usable on other cases but i have not tested that. Case in question:…
I created this FLIRC Raspberry Pi 3B+ case caddy from scratch in Fusion 360 to secure my Raspberry Pi 3B+ in an aluminum FLIRC case running Octopi to my Ender 5 Pro using the rail under the Ender 5 control panel using two M5x8mm allen…
Bracket for mounting Raspberry pi Flirc case to 3030 profile use 2 M3/M4/M5 x10 screws and 2 M3/M4/M5 nuts to mount it to profile (choose screws per your liking) you can also use my drop in T nut:…
Thank you Micro SD Mantis4g63. Modified for 2 25X25mm fans and added a tray to hold the Micro SD to Micro SD Extension. These smaller fans allowed me to mount them inside the enclosure and the Micro SD to Micro SD Extension tray is just…
I created from sratch a clip to hold the RPi 4 FLIRC case with the clip from https://www.printables.com/model/677437-en You need to print both to use this clip. The RPi holder goes all the way down to rest for stability against the side…
Mount replaces the bottom cover of the Flirc case. Attaches to the Prusa Enclosure with two M3x12 screws
Modified top and bottom covers for the Flirc Raspberry Pi 4 Case, with camera mounting holes for camera module v2. You will need to cut a small slit in the top of the case to use the top cover. Both models print easily laying flat. Bottom…
For those who want a fanless and optimal cooling setup for their Pi and 3D printer! I've been using a Flirc case for my RPi 3B+ and Ender 3 ever since I got my printer more than a year ago. So far, I've ran Octoprint on it with a bunch of…
This is a back cover that screws onto the Flirc case for a Raspberry Pi Zero (2W). It allows hanging it onto some custom mount pegs like the once on my mk frame mounting clip. I printed with supports on build plate. afterwards just remove…
