Liczymy pasujące modele…
Commercial licence I’m now on Patreon! If you'd like to support future projects or legally sell physical prints of my models, consider joining my Patreon. https://www.patreon.com/cw/MILITECH A compact Springfield Echelon slide-action…
This is a 10X Lego Tricorn Hat. Use it for your bigfigs. Size up or down as required. Supports required underneath. Print Settings Supports: Yes Category: Toys & Games
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
The .30-06 (thirty-aught-six) Springfield cartridge was introduced to the United States Army in 1906. The .30 refers to the caliber the bullet in inches, and the 06 refers to the year the cartridge was adopted by the US Army, 1906.…
This case with a sliding lid will hold 20 rounds of 30-06 ammo. Each round sits in the case snuggly and doesn't move around.
Intro I have tried a few Gridfinity magnet jigs, and most of them work well. But when I'm done gluing/pressing, where do I put the jig? I have somehow lost more of these jigs than I have printed! Why can't I store the jig in the very…
.30-06 Springfield, also known as .30 Gov't '06, is a centerfire rifle cartridge designed in the United States of America by Springfield Armory in 1906. Print this for props, display, education, training, just because it's cool, or scale…
The MMS Springfield Hellcat Platform Holster! Use in your car console, on your desk/table, on a nightstand, in your gunsafe, wherever you want! As per most of my designs, it is MMS Capable and as such is absolutely modular! Use any of the…
RingFit Holder - Nintendo Switch. It will work with Ring-Con and Leg Strap. Can be mounted with two or four screws. No Support. Remix of: https://www.thingiverse.com/thing:4627262 Print Settings Printer brand: Creality Printer: Ender 3…
This is a tool to make vertical adjustments to a A2 style front iron sight. This is specifically designed for Springfield Armory flip up sights as shown in the original picture. This can be printed off of the base of the tool with zero…
1:1 and scale model of a kingfisher. The model features detailed feather texturing along the model. I recommend printing it at a finer layer height or with a resin printer. The files are pretty large, they may take a while to load.
I got a request for a 9mm Luger ammo box. The spacing is 50pcs/10,34x30,74mm between the insert top and bottom. Please read the size for the ammunition before you comment that your ammo doesn't fit. I am using 1,6mm stainless steel…
Wanted a magwell with a little lower profile than the ones I was finding for my Night Stalker with a Prodigy Magwell. Ended with with a snap-on design so I didn't have to change out the mainspring housing pin. Slide it on and snap it into…
Small and simple hook for IKEA Skadis board. The hook is snag fit to the board, ideal for hanging smaller objects - key rings, netsuke, capsule toys etc. Update - 01 Apr 2024 Re-exported the project file using ‘Generic 3MF’ from Bambu…
The top sliding part is held in place by 7x2 piece of 2x2mm magnet. Feel free to change the magnet size,count or the front design with the .f3d files!
Is your bigfig thirsty? Give them a drink! This is a 10X version of the minifig bottle. Supports required for both pieces. Print in two pieces to minimize supports. Print Settings Supports: Yes Category: Toys & Games
Bust of Ringfinger Leonhard from Dark Souls 3, sculpted in Zbrush. "Leonhard was born into royalty, which is believed to be the reason for his skill in both sorcery and swordsmanship. In his youth, Leonhard suffered grave burns to his…
This is a simple display stand I created for the Springfield XD 40 S&W Pistol. I designed this for color switch printing using Prusa Slicer. You can place color switches at the following values in Prusa Slicer to achieve the results you…
Holder for bateries works with MacAllister SOLO 18V Batteries. Tested with 2.0Ah but 1.5Ah and 4Ah will work too __________________________________________________________________________________ Some options available - chose best fit…
.30-06 Springfield stacking loading block. This is a work in progress, so check for updates before printing. Revision History: 05/13/2023 - Text vertical adjusted. Category: Tool Holders & Boxes
EggTimer Tracker Box Build Video: I use the 0.28 spacers for the LCD and Audio Board mounting Spacer 0.44-Buz is designed to fit by the buzzer on the board Recommend using 7 slot picatinny rail 4-40 hardware is used for mounting all the…
After experimenting with magnets, I decided to add a latch.
Print at 300 degrees (I was too lazy to pre-rotate it) with supports and brim. Also works as adhesion test for your printer. Update: don't drop it loaded, print cracks between layers.
.30-06 springfield round for M1 Garand
The lids on this stuff doesnt last as long as the glass. Rather than buying new sets and discarding the old glass, I made these. I print them out of PETG as it's somewhat food safe, although I'm not sure how food safe anything FDM printed…
Kingfisher Earrings PLA 0.3 Layers Ironing on top
Kingfisher in a dynamic diving pose, with an angular beak and faceted wings suggesting motion.
springfield echelon pistol stand. printed on ad5m 20% infill 3 walls
This holster fits a Springfield Hellcat pistol in 9mm and is intended to be mounted under a desk or table. I suggest printing it in a vertical orientation with only the muzzle end of the mounting bracket on the build plate. Requires 2…
Quick and easy light access for dark nooks of the house without ever leaving your natural gun grip that wont break the bank. requires: 2x M3x20 screws 1x M3x12 (I think that a 10 would fit) 3x M3 Nut made to fit Olight I3T EOS but I am…
Extended Magazine Grip Blocks for Springfield XD 9/40 These were developed from scratch in Fusion 360 for use with Springfield XD, XD Mod 2, and printed variants. They are direct replacements for the OEM magazine base and install the same…
three dials 20 cm frame: The dial frame is only for variantA and variantC of the dials! wall art bookmark stencil topper
Just a storage for 4 rolls of whatever you choose. 1 compartment is bigger for the large Clingfilm device. My wife's idea - she wanted to free up some space inside the cupboard itself.
Decoration, stencil: kingfisher (one colour)
These are supposed to be fully printed, drop in replacement parts for the nerf slingfire. Although I modelled these from scratch to match the slingfire's dimensions, they were heavily inspired on SomeDingus 's Nerf Retaliator Brass Barrel…
What's up everyone! I like having all my guns on these stands, and being able to keep the mags with them is nice. I couldn't find a design specifically for some of the models I have, and so I decided to design them. Wanted them to be a…
A great Wall Art of a kingfisher. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used Flux.1 AI, Copilot and Hotpot
For the Springfield Armory .40 magazine baseplate adapter for MantisX training system. Added standard baseplate as well. Edit: Added thin version Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…
Hallo das ist ein Ansaugfilter mit einem Gardena Anschluss für ein Hauswasserwerk. Ich habe es entworfen aus dem Grund weil unsere Zysterne voller Blätter und Dreck ist und somit die Pumpe immer verstopft. Benötigtes material: 4x M3…
The MMS M1A Magpouch is here! This magpouch is for the box magazines the M1A/M14 uses! Make sure you grab the other things you need with this in the links below! Grab an MMS Belt Module For Warbelt Use! -=|MMS Belt Modules!|=-…
Hi it's my body post brace for HSP Flying Fish
Springfield offers a 7-round magazine for their .45 ACP XD-S original model , but not (yet?) for the newer XD-S Mod.2. The “Mod.1” magazine will not fit into a Mod.2 receptacle due to interference with the plastic grip extension. However,…
.30-06 Springfield Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Revision History: 05/14/2023 - Fixed *-50 slot cut into lip. 05/13/2023 - Text vertical adjusted. Print Settings Rafts:…
I made an insert for my .30-06 Springfield . I based my measurement on CIP chamber data plus a tolerance of 0.2mm of the diameters H2 and P2.
Frogfish are in the same order as as their more famous relatives, the deepsea angler fish, though these tend to stay put on surfaces instead of free-swimming--hence, the ‘arms’ they use to help propel them. This model is based on the…
I wanted to hang 4 magazines on a wall. I could not find very much for the Springfield Kuna, I guess because it's relatively new, so I did a simple design in TinkerCad. This screws to the wall (provided 4 holes to help positioning, sized…
Dock to hold and XDm with a PL-MINI 2 light and charge it. Print the chamfered version and add supports, or print the square version without supports. Chamfer was added for drawer clearance and is what is shown in my images. Category:…
Experience a piece of WWII history with this full-scale 1:1 30-06 Springfield bullet used in the legendary M1 Garand rifle 🇺🇸. Perfect for historical displays, cosplay props, collectors, or as a realistic decoration on your desk. Designed…
Australian lungfish (Neoceratodus forsteri) . Honestly, I don't know much about the species other than what's in the Wikipedia article, but I do know that over at the California Academy of Sciences they have one that's estimated to have…
Housing for replacement pancake type motor to suit old Hornby/Lima ringfield motors. Suits COCO or BOBO bogie sets. Two different designs as I found there was a difference due to age of the units. Print flat with no supports. I print in…
coasters 10 cm, two colours; dials 15 cm / 20 cm, three colours
Print in Place keine Stützstruckturen nötig Helfer im Garten
The first one milimeter print by transparent filament.
Tento model není určen pro MMU multimateriálový tisk, ale pro ruční výměnu materiálu a změnu barevnosti filamentu po vrstvách. This model is not intended for MMU multi-material printing, but for manual material replacement and filament…
This is a compact and practical magazine pouch designed for both the Springfield Echelon Compact and the full-size Springfield Echelon pistol magazines. The pouch is optimized for everyday carry (EDC) and range use, offering a secure fit…
Breech/dart gate for nerf slingfire that uses 16mm OD barrels. Does not require chambered barrels, uses a barrel retention mech somewhat similar to worker breeches.
This is old design of when i tried to replicate springfield power plant, it is not 100% accurate and i don't know if it is able to print
The first one milimeter print by transparent filament.
Holds your toothbrush!! 2 versions - Left and Right. Print it on its back. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Yes Resolution: .2 Infill: 5% Category: Bathroom
You can lock it on the mag release if the bolt is back but isnt necessary for stability. recommend 5 walls and 25%+ infill. did it with Prusament PLA and .2 height in pic.
Couldn't find this model anywhere, so I took Eletric Squid's model and just made it not big. The proportions are still a bit different from the original lever, but it should be a bit more confortable for people with larger hands. I…
I wanted to practice using Fusion 360 so I tried to measure and model an IKEA Sigfinn as an exercise. Here are the fruits of my labor! This simple phone stand is universal and will probably fit pretty much every phone. It features a…
This will press fit onto a post with a diameter of .375-.380. Easy install and removal.
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Imitation of .30-06 springfield cartridges for exhibition or diorama. Very nice model. There are 2 versions, one is an exact imitation and the other has a hole…
!! So was braucht jeder Garnelen Halter !! Eine Perfekte platzsparende Kombination aus Röhrensystem und Moosbeet, perfektes Versteck für Garnelen und Jungfische in Kombination mit einem Moosbeet das den Garnelen und Fischen eine…
This is essentially a drop-in mod for the Nerf Slingfire to have a big loop lever. This allows you to spin cock your blaster with some training. I'm pretty bad at it myself so I taped a screwdriver to stock to weigh down the rear. Print…
I have been really into the LEGO space theme lately, and I wanted a couple of these guys for my space sets. I used the bigfig hulk body part from PrintableBricks.com, and combined it with the Minifig Head Alien Squidman part from the same…
The .3mf files are just examples, the real party is in the .3fd files. Crack open Fusion360 and use those to create your own parameterized miniatures trays. Use the FigFinity1xN.3fd file for a mini tray that is 1 GridUnit wide, and N…
Tento model není určen pro MMU multimateriálový tisk, ale pro ruční výměnu materiálu a změnu barevnosti filamentu po vrstvách. This model is not intended for MMU multi-material printing, but for manual material replacement and filament…
This is a new muzzle for your SLAB v4 made by SillyButts, inspired by the nerf slingfire. This muzzle is designed for the v4, I do not know if it will work with the v3, as I do not have one. This muzzle ONLY WORKS WITH THE SHORT PLUNGER…
This molding preparation set will greatly help you when making your own holster for Springfield Echelon. - You have to remove the disassembly lever - Safariland mounting/drilling template is included in the files - Retention plate comes…
Allow the print to cool completely before removing it from the print bed. Remove from the print bed very carefully. If you need a different size, please adjust the size of the model according to your own needs.
.30-06 Springfield (30-06 Spring.) loading block for 100 cartridges
Advent Calendar - Door 4 10min Blitzprint part of a "Super Fine Art" series photo: Prusament Vanilla White printed on an MK3S Print instructions Based on Standard Settings 0.2 @MK3 Speed with 0.4mm nozzle Z-ROTATE Model by 46 degrees to…
Allow the print to cool completely before removing it from the print bed. Remove from the print bed very carefully. If you need a different size, please adjust the size of the model according to your own needs.
Jebediah Springfield's tongue, a quick model in Solvespace. Category: Scans & Replicas
This is my brick version of the gladiator Rotta the Hutt shown in the new Mandalorian and Grogu movie remixed from a Jabba the Hutt figure. It requires three blue cross-axle/single-pin Technic pieces, and can be used with brand-name hulk…
Recording Artists -Dusty Springfield
This .3MF file is completely free to download, print, and use however you see fit. There is no paywall, membership, or hidden charge. Once you download the file, it is yours to enjoy. Print it for yourself, give it as a gift, customize…
a 3x2xX Box dispenser for the Gridfinity system. Print with supports only underneath the opening at the bottom, and using standard profiles. Gridfinity by Zack Freedman. Disclaimer: Please refer to the manufacturer of your resin for…
cca 20 cm x 2 mm, one colour / two colours, the bigger the better
This is a mount for my SA XD-E “plinker” - the cal.177 BB gun. The BB version of the XD-E should have the same measurements as the .45 ACP or 9mm version, , so the mount should work for those too. Also, AFAIK the XD (without E) series…
✨ Features: 🪶 Detailed feather textures 🐦 Realistic bird shape and proportions 🌳 Natural tree stump base 🎨 Looks great in silk, metallic or stone-effect filament 🏡 Perfect for a shelf, desk or nature-themed decoration A beautiful model…
Instead of buying the crappy rims that last only a few days of flying, try this ones. Glue them together. And you are up flying again in notime. Fits the OEM 5 inch bush tires
This allow you to clear the MAC DS9 Comp without shaving any parts.
Adjust the size acording to your needs. Small window bars
Very fast to print. Two coloured print.
This is a round decorative coaster inspired by a armory emblem design. The model is optimized for clean two-color printing and sharp logo contrast. The coaster was printed using a manual filament swap (pause at layer) – no AMS required.…
I needed a GFI face plate .160" taller.
I noticed that the original model has errors which cause the inner and outer shell geometries to not be concentric. As a result, the wall thickness is not uniform, which makes it easy to break the ball when removing supports. I rewrote…
