Liczymy pasujące modele…
Printed cover to mount the Prusa GPIO “Hackerboard” to the frame. 4x M3x6 BHCS or SHCS to mount the board to the cover 2x M3x10 SHCS to mount the cover to the frame Wires route through the MMU pathway into the electronics enclosure.…
Cover for the Raspberry Pi GPIO pins, to prevent accidentally shorting them out when using a case (such as this one ) that leaves them exposed. This remix has a lip at the top for easy removal -- it's not a tight fit (assuming your…
Sussie : Kpop Demon Hunters. Magpie I was going to put this in Myclub but I lost my eye and rushed it and then gave up. So I will leave it here. Lots of missing details… and the legs are cattywampus… the ridge line bothers me. But I just…
I've solved some errors in the lower part and modified the top part to have space to use the GPIO pins from outside and have the pin to fit a 30x30 mm fan without screws. The fan is oriented to blow air inside. I've removed the holder,…
This design replaces the original Prusa Core One Wifi cover. In a single cover it combines the Wifi and the GPIO interface. ACCESSORIES This part is secured with the original M10 SHCS screw The GPIO card is secured with 4 x M3x6mm SHCS…
The top/bottom layers are only 0.4mm thick, but the rigidity is not compromised thanks to the ribs. The whole thing can be assembled with four M2.5x8 screws. This model is designed to be printed with a 0.8mm wall thickness (0.4mm…
Set 0 botton and top layers Infill: Honeycomb, I used 25%
10/26/2025 - Edit: Version 2 is now available. The feet extend further forward for better balance and movie accuracy, and the hat is now more accurate as well. The feet, beak, hat, and head are split off from the main body to minimize…
Do you ever need to place an arduino nano on a breadboard? place this case on it to protect it while you still have access to GPIO Designed on Fusion360 Print in PETG or PLA - easy slot together
Update 5/28/2023: Replaced drone reed tongue with an improved model with better tone. Quick Start If you don't want to read all the text, the quick way to jump in and have a playable instrument (without the bag) is to just make the…
This is a playable uilleann (Irish) bagpipe practice set. It contains all the printable parts you need to build a practice set. I don't yet have good assembly instructions. Please email or message me if you'd like personalized assistance…
Donald Linsay designed a mini bagpipe chanter in high G, and I wanted to print it as a practice chanter so I took the top file from Kadaku's practice chanter and resized it to fit, and I also took the printable reed parts to make my…
I added a cut for heatsink
UPDATE 2025-03-03: Uploaded STEP files for easier editing and ready to print .bgcodes for Prusa Core One and Prusa MK4S. The hexagonal case for GPIO Hackerboard You only need 4 pcs standard M3x10 screws from the spare bag:
This is a digital 3D printable model of Sussie the magpie bird from KPop Demon Hunters . It comes in two versions: one with a hat featuring loops for attaching a real string, and another with the string already integrated into the model.…
Nothing new but I just thought I'd share my design. This was originally to mount a RPi 4 under a desk, which housed my printer. Then I used for multiple projects, such as a bird box. I wanted the case to be as thing as possible, to keep…
This should fit ESP32 WROOM USB-C and micro USB versions. With this case it possible to press both buttons (BOOT+RESET), even though it does not have cuttings for some reason. (My first model edited in TinkerCad)
I have remixed the mesh model that the gpio is accessible Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Infill: 20 Filament: Prusament PLA Galaxy Black Category: Electronics
I've got a Raspberry Pi 400 and I don't like that when I pick it up I always seem to put pressure on the GPIO pin port on the back. So I made quick cover that slips on – friction fit – and keeps them protected until I need access. Print…
This is a jig for installing the solderless GPIO header on a Raspberry Pi Zero/Zero 2. Same concept as this: https://www.adafruit.com/product/3413 Print 2 copies of the jig Hold it together with some screws or 2 allen keys (or whatever…
This puts the GPIO card under the wifi card, so the pins are low and at the back of the machine and easily accessible. The GPIO cable passes through the slot for the bed cables. MMU text included for Wifi and GPIO symbol. Uses 4 m3x10 (or…
I remixed this design to mount my 3.5 touchscreen and a Raspberry Pi 3B+. The mounting holes for the RPI are oversize so I could use some M3 screws I had here. You will either need to open up the holes in your PI or make the ones smaller…
Remix removing the GPIO slots of the original design by pedrolamas Original File: https://www.printables.com/model/184688-raspberry-pi-zero-2-w-screwless-slimest-case
Full enclosure for the GPIO “Hackerboard” for the Prusa Corre ONE. Attaches magnetically to the Core ONE body for flexible placement. Requieres: 4x M3x8 screws 5x 6x3mm magnets
A statue of Xi Jingping. Was took down on chinese makerworld due to … ? I did not get the point, as for me it does not seem offensive. Statues look good with matte PLA or marble PLA. Most likey as the layers are less visible.
Simple remix of MisterMcDuck's Raspberry Pi Zero case for the MakerSpot USB Hub. My RPI0 already has a GPIO header soldered on already, so I punched a hole in the case to allow them to pass through. Great enclosure, thank you for doing…
Modified case top and bottom with 5v and ground GPIO pins cuts to power my LED light. Print List Top (pizero2casebottom) Bottom (pizero2casetop) 2 clips (Clip_wire_interlock) Parts Needed 4x M2.5 screws
I made gpio cover with perfect fit because I dont like others that I found. Test it! You can use it with another Raspberry Pi, my Raspberry is Pi zero 2wh.
Increased the size of the GPIO hole so that the ribon cable from an Adafruit Cobbler can fit through. increased the size of holes so that heat set inserts can fit in.
his is a remix of a fantastic one piece case for the RPI zero made by superrei. Added GPIO and cooling holes ... July/11/2018 added the case including the cam If you download and/or find it usefull, do not forget to leave a like for this…
Designed for use with my Ryobi Compact Battery Powered Chemical Sprayer. This allows the use of "standard" bottles. The intake tube can simply be extended with 5/16 in. I.D. x 7/16 in. O.D. Clear Vinyl Tubing No supports
Insert to fit between the Flipper Zero and the silicone case to cover the GPIO pins when not in use.
A detailed model of the Prusa GPIO Hackerboard . Created from the original PCB manufacturing data, but vastly improved by user PATROSS (thank you!) with nice labels and graphics for the various IO pins for the Prusa Chain Production PCB,…
Universelle Aufnahmeplatte für den X-Tool F1 mit Pins zum Abstecken von Anschlagspunkten. 10mm Raster mit 4mm Bohrungen
Collingwood Magpies 2023 Premiership Cup
Most of the parts are from other things. USB Cover https://www.thingiverse.com/thing:4541413 GPIO Cover https://www.thingiverse.com/thing:4251391 (Many exists but this worked the best for me) Stand…
Screwless Raspberry Pi 5 Case with easy access to GPIO, PoE and Camera Print with supports in order to get a good fit for the snaps as they are overhangs. Tried to get them at an angle for better printing but it makes the case loose To…
This model is compatible with the lego system.
Kingroon KP3s - LCD TFT RPi GPIO Raspberry pi Zero 2w This design has been created to place a raspberry tft with klipperscreen in our kp3s. NOTE: This is only compatibility with raspberry pi zero 2w or another model with the same…
I started out with a plan to create a Raspberry Pi 3 GPIO header cover with customizable cut-outs for jumpers. The idea was to only expose the pins that are needed and protect the rest. In the end i have an scad fully customizable header…
Use 4xM3*4 heat inserts and 4xM3*8 counter sink screws for assemble. Freecad design file included incase you need to make your own change. Updated: V2 version extended the edge by 1.5 mm so that TF card can be protected by the case.You…
Requirements: 4 18.6mm Length, 6mm M2.5 Threaded Standoffs, M-F for bottom threads 4 20mm M2.5 Screws as top screws. 4 M.2 HAT + / AI KIT/ AI HAT +/ SSD KIT official included plastic Threaded Standoffs. 4 14 mm M2.5 (can be longer) Screw…
The main purpose of this remix is to implement a more accessible GPIO pin section design to the original case. The original design has no easy access to GPIO pins. Pins are hardly reachable, and it is difficult to see what pin you are…
Added mesh in front of fan and cut a hole for easier GPIO access. Use PET-G . PLA will most likely deform under Raspi's temperatures. Bottom parts can be found from the original model of which gcbenlloch's remix is also based. Original…
Two versions one that is to cover GPIO pins and spacers and one to cover the GPIO pins only. WIFI Dev Board version is untested as I don't own one.
The original one: https://www.prusaprinters.org/prints/32790-raspberry-pi4-case-for-prusa-mk3 Basically the same version as the original, only with cutouts in the top part for GPIO-access. v2 is the basic version v3 is the compact version…
Designed this jig to easily install solderless GPIO hammer headers on the Raspberry Pi Zero without the risk of bending or otherwise damaging the Pi or the GPIO Header. Place Pi on the jig like in the pictures, place the header and give…
This is my Harefolk with a bagpipe remix made for a Patreon of #MZ4250 who requested it on the Discord server. This model is free to use for everyone. If you like it and/or would like to help me keep up my cafeën addiction. Please…
Highland Bagpiper Gnome Category: Sculptures
I printed them using ninja flex TPU on a purse mk3 S+ with a .4 nozzle, .2 layer height, 245 nozzle temp, 4 layer wall thickness, 40% grid infill on a texture steel print bed. with bed supports. with these settings I feel it came out…
Please post a make if you make one! :) Two relay type / size boxes are available here... regular and an optocoupler relay. The optocoupler better isolates the relay control from the rest of the board is how I've read it. I've not had any…
It is a simple and easy to print case for RPi 4B with a capability to install a 40x40x10mm fan, which is just snapped into the top part of the case. GPIO slot can be covered with a simple insert, that partially hides the cable mess. Only…
Printed cover to mount the Prusa GPIO “Hackerboard” to the frame. Remixed it to use 3 magnets (6x2mm) to attach it at the back of the core one
Stevenson screens protect ambient sensors from direct sunlight and rain, ensuring constant airflow (based on temperature differential) to provide accurate readings. Due to how they are built, you will not be able to see the screen of your…
Inverted bottle caps for standard GPI/SPI threads. These can be used with household products to let the last of it drop to the bottle neck. The first number is (approximately) the outer diameter of the bottle threads.
this part is meant to replace the mouthpiece part of the original 3ddrones files, it will require you to remove the pin that's there and then glue this piece straight on, or, if printing the blowpipe whole then you can just attach this to…
Everything is the same, but in original file you can see cracks around Raspberry Pi logo. So I repaired them for better aesthetics and easier printing. Enjoy ;) Print List Top (pizero2casebottom) Bottom (pizero2casetop) 2 clips…
You will need 2 neodymium magnets, round flat, the stronger the better, diameter 8 x 3 mm Print Instructions 0,4 nozzle 0,20mm layer height. no supports - I recommend the use of brim pause to insert the magnets (settings in the 3mf file)…
This is a quick remix of luc.e's RPi 3B case that mounts easily to the aluminum extrusions. I love the case they designed! It fits the pi perfectly and snaps together really solidly. All I did was add a couple of cutouts to the case to…
Support structures are included in the file, as well as suggestions for material and layer height. work much better than the original ones
This is a remix of dancan13f's excellent GPIO and wifi cover. Specifically, it is a remix of his V2 model. In addition to holding both the GPIO and wifi modules, this remix adds loops for zip ties to attach to. The idea is that zip ties…
any print settings Used to cover gpio pins this is so they dont short out
A module for the Snap Together Raspberry Pi case (linked below). Made in Fusion 360 with the STEP files provided there.
Model designed to improve KP3S Pro and Pro with a RPi 4 with TFT LCD Touchscreen and KlipperScreen. Material needed: Raspberry PI 4 TFT LCD 3.5" PLA filament Base: 4 screw M3x6 Base + Mid Union: 2 screw M3x35 Mid + Case Union: 2 screw…
Retroflag GPi Stand Remix Changes: Removed text Removable back 4 back parts to choose (with SD card storage, regular and shorter versions of both for those with modded L and R buttons) enjoy! Category: Video Games
Little mod for anyone who had the same problem
This is magnetic housing for the Prusa GPIO Hackerboard Set. It's modeled so the Hackerboard snaps in using the four holes at the corners. There is a hole modeled through the bottom so you can push the Hackerboard out to remove it. I also…
It's scaled at 100% to match the height of other mini dudes but it should be printed at 120 (just a suggestion)
Kingroon KP3s Pro - LCD TFT RPi GPIO Raspberry pi Zero 2w This design has been created to place a raspberry tft with klipperscreen in our kp3s Pro. NOTE: This is only compatibility with raspberry pi zero 2w or another model with the same…
So after I actually managed to short a Pi lying around through the workbench so I draw this one up. Print it with the flat end down, if needed clear the holes with a 0,75-1mm drill. If you want to make a remix Fusion 360 file is here:…
Blocks most GPIO pins of a Raspberry Pi board for connecting the Pi to the Prusa Einsy board via GPIO using the Prusa Pi-Zero W installation guide ( https://help.prusa3d.com/en/article/raspberry-pi-zero-w-preparation-and-installation_2180…
Hi, added two holes for GPIO and cable routing to suit my needs, feel free to remix it. Shout out to the original creator of the case.
Remixed enclosure for the Waveshare ESP32-S3-ETH+POE board. Includes cutout for access to subset of GPIO pins.
Variant of the snap lid case for the "Smallest possible ESP32-CAM" to be able to use the GPIO headers.
Bring a modern festive touch into your home with this Diamond Christmas Tree , a clean, faceted design that prints beautifully on any machine. The geometric shape creates a sparkling look under ambient light, giving it a stylish,…
Only modified stl are uploaded. You need to download the original model: These are based on the V2 models. Wings and tail models should be printed with a brim. The Circles, eyes and buttons needs to be printed with support turned on. The…
This tiny spacer allows you to solder a HAT onto a pi zero keeping the minimum distance, and still be parallel to each other. The highest point on the pi zero is the hdmi port, btw. The round washers are designed to use M2.5 or M3 screws.…
Remix of the mini faux red dot sight by Ehdrien that can attach to the MHP Magpie . Print this out and simply screw it on in place of the rear sight using the same four screws. It prints with very minimal to no supports. If you use…
I used to just punch a hole in the bottle cap to make a “ self-watering ” kind of water reservoir, and i thought the must be a better way. So i designed this. It screws on every standard glass bottle we have here in Germany and i believe…
A case for the Orange Pi Zero 3 that exposes the GPIO pins and has space for the expansion board
A press fit cover for the exposed GPIO ports on the Raspberry Pi 400 computer. Used to prevent dust or accidental shorting of the pins when not in use. Print instructions Prints fine with the default 0.15mm (Speed) profile.
Model designed to improve KP3S Pro and Pro with a RPi 3 with TFT LCD Touchscreen and KlipperScreen. Material needed: Raspberry PI 3 TFT LCD 3.5" PLA filament Base: 4 screw M3x6 Base + Mid Union: 2 screw M3x35 Mid + Case Union: 2 screw…
Snap, slap, or flick your way into reloads!
This is a basic SNES-style version of the shoulder buttons as part of my custom button series for the GPi case. This replaces the L and R buttons on the back of the case with a profile modeled after an 8BitDo SNES controller making it…
une boite unitaire et compacte pour anche de cornemuse
Simple remix that thins out case wall between the PCB and TRRS jack for a better fit.
This is a square paddle version of the shoulder buttons as part of my custom button series for the GPi case. This replaces the L and R buttons on the back of the case with a slightly pronounced paddle for more comfort for larger hands.…
Remix of the sparkyws Raspberry Pi 5 Pimoroni NVMe SSD Base to remove the lip for the GPIO case variation.
I just got a Raspi Pico H and needed a cover to protect the GPIO while i don't use it. I love the case designed by GrevTech and made this to go with it. I've printed mine using Creality CR-PLA Black, 0.4 nozzle, 0.28 layers, 100% infill,…
I have used PET plastic with flame polishing.
I designed this box to watch the timer of my washing machine. I run the example code from the library with the cam server. The batteries in a separate Box .
Paperclip with a magpie silhouette after a friend's request. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: generic PLA Category: Organization
Raspberry Pi GPIO cover. Only 5V power, Ground, TXD and RXD are accessible. So You can connect Raspberry Pi with your MK3S.
note: This has not been testet yet, but if so it will be updated here. Let me know in the comments, if it worked for you
I know 8x2.6mm magnet is a weird size. This was the smallest i had on hand at the moment. I will literally order all the magnet size in the world god damn it. Here is the Onshape file:…
Intended to fit the WaveShare CM4 IO board with Raspberry Pi 4 Compute Module, a redesign to allow for access to the GPIO connector. The case has a 40mm fan design to blow air across the top then around the side and to the bottom to cool…
GPIO pinout template for the Raspberry Pi with the pin labels printed directly onto the part. Simply slide it onto the 40-pin header to quickly identify the pins. Required for the fine text and details: 0.2 mm nozzle Arachne wall…
Bagpipe Garden Gnome 🎶 Bring a little Scottish spirit to your garden, shelf, or desk with this cheerful Bagpipe Garden Gnome Few supports are needed. I used organic-style supports, which peeled off cleanly with minimal effort. Adjusted…
Printed cover for the GPIO Hackerboard. It sticks to the Core One frame by magnets. Materials needed: 4x M3x6 screws (you can use the spares of the assembly kit) 4x 4x2mm magnets Magnets of this size aren't too strong, but they holds the…
I made a 1 cable smarthome display that I use to track energy usage and see my security camera stream https://www.reddit.com/r/raspberry_pi/comments/1ba0sib/easy_1_cable_smarthome_display/
