Liczymy pasujące modele…
Greaseweazle v4 & F1 Plus Mini Case with space for 3.5" Floppy *added new version of the bottom part that fits a Greaseweazle v4.1 **added new version of the top part with a Greaseweazle logo (add both the logo and top at the same time to…
Greaseweazle v4.1 slimline case with access to all the ports & jumpers so no need to open. Based on my original snap shut design for the v4 ( Greaseweazle v4 Slimline Case by TomDD | Download free STL model | Printables.com ). Details of…
I wanted an integrated solution for my Greaseweazle V4, drives, and a power supply. Bill of Materials Quantity Item 1 Greaseweazle V4 1 Floppy ribbon cable 1~2 Diskette drives 1 Mean Well RD-35A power supply 1 IEC 60320 C14 panel mount…
This is an enclosure for the v4.1 Greaseweazle and a 3.5 inch floppy disk drive. This only works with the 4.1 greaseweazle board. Requires 4 m3 x 12mm screws to hold the drive into the enclosure and 2 m3 x 8mm to attach the back cover on…
Greaseweazle v4 slimline case with access to all the ports so no need to open. Two versions, standard one that needs to be glued together and one that snaps together (latch in filename)
Parts Knurled brass threaded inserts: 8 x M3x5 (for the case) 4 x M2x5 (for the Greaseweazle) Bolts: 8 x M3x10 hex (for the case) 4 x M2x4 hex (for the Greaseweazle) 4 x M3x5 Phillips (to mount drive) To complete the device, you will also…
Bei dem Modell handelt es sich um ein Gehäuse, welches speziell für Greaseweazle V4 ausgelegt ist ( https://github.com/keirf/Greaseweazle/wiki/Greaseweazle-Models ). Den Rahmen und das Rahmen-Unterteil gibt es auch für V4.1. Es ist…
An External 3 Drive Bay Enclosure for Greaseweazle. It has mounting options for the F7 Plus or the V4 Greaseweazle. Use M3 screws for the enclosure. The Greaseweazle's will need smaller ones. Will require a large printer the length is…
Slimline 3.5" floppy disk drive and Greaseweazle ver 4.1 enclosure. This is a remix of a housing for a Greaseweazle ver 4 https://cults3d.com/en/3d-model/gadget/greaseweazle-v4-case The bottom will require supports in the screw holes but…
Required Screws: 4x M3x4 Screws for the PCB 4x M3x4 Screws for Drive 8x 4x30mm Wood Screws for the Case All screws go directly into the Plastic.
Case for greaseweazle 4.1 for 3,5 inch floppy drive.
Improved stability, deeper screw holes, space for an Amiga sticker & a slight design change.
Case for a Greaseweazle v4.1 interface board and a 3.5" floppy disk drive to go with it. Improved the original design in several ways: Added a power or activity LED hole (although I also left a version without it), the back panel now…
Greaseweazle 3.5" Drive Case fits 3.5" drive with either v4.1 or v4.0 Update to my other design with a little bit more room for longer 3.5" drives and now loosely based on the Commodore A1011 drive rather than the older A1010. Please note…
Added engraved labels to TomDD's version of the slimline case
This is the greaseweazle case currently in production by Emmy Bear Holdings. You will need: 4 M2x8mm screws (90362A138) 4 M2x0.4 mm hex nut (91828A111) 2 M3x6mm screws (91294A126) 2 M3x0.5mm hex nuts (91828A211)
A case for the Greaseweazle floppy drive controller, F7 version. Also features an external molex power connector, but you usually won't need it. Designed for brass threaded inserts. Use a soldering iron to set them into the holes. This…
Slim case for the Greaseweazle V4 USB floppy adapter. The board and top snap into place with no screws needed.
34pin version of the 26pin case. Had to modify it a bit as the “Blue Pill” design seems to vary a lot. This case is 2mm taller to accommodate the USB connector plus a lower right angle jumper hole and larger top hole as the top pins are…
Little case for the 26pin Greaseweazle adapter board soldered to a STM32 "Blue Pill". Includes easy access all of the jumpers etc... so no need to take it out of the box. Top does clip in but I usually glue it for stability.…
Easy to print enclosure designed to house a 5.25" disk drive, a 3.5" one, and a Greaseweazle “F7 Lightning Plus” PCB. See my blog post for details on how to build the station. Additional material required: 12 M3 screws 12 M3 nuts 4…
A remix of Bigby's Greaseweazle station for the v4.1 model. Changes from original model: - Fits a Greaseweazle v4.1. Has a cutout in the back panel for the USB-C connector. - Mounting posts for a LM2596 DC-DC power supply for the 5V rail…
This is just a redesigned front plate that fits a full height 5.25" drive.
This is a case for the excellent Greaseweazle F7 from Keir Fraser. I am not a fan of cases that require screws so designed this which simply snaps together. There are two different lids available. One is solid and has no openings for the…
Greaseweazle F1 Plus Mini Case Simple case to house the board giving access to the 34pin, power & USB connectors and the reset button. Case simply clips together.
Short case for Greaseweazle "Blue Pill Direct" build — floppy drive wired straight to STM32 Blue Pill with only 14 Dupont jumper wires — no adapter PCB, no ribbon cable. See https://github.com/keirf/greaseweazle/wiki/Blue-Pill-Direct You…
Two-part enclosure that turns Mitsubishi MF355H laptop floppy drive into a standalone USB floppy drive, with a Greaseweazle on an STM32 Blue Pill board inside. Features - Built-in front wall instead of the drive's bezel: disk slot with…
A compact two-part enclosure for the Greaseweazle "Blue Pill Direct" build – a 3.5" floppy drive wired straight to an STM32 Blue Pill with only 14 Dupont jumper wires, no adapter PCB, no ribbon cable. See…
An External 3 Drive Bay Enclosure for Greaseweazle. It has mounting options for the F7 Plus or the V4 Greaseweazle. Use M3 screws for the enclosure. The Greaseweazle's will need smaller ones. Will require a large printer the length is…
