Wyniki wyszukiwania: gri

Sortowanie

32 905 modeli

P
PrintablesPred

Gridfinity Storage Box by Pred (now parametric)

IMPORTANT Read the description carefully before print! Check the changelog at the bottom before printing, there might be updates to the model The original model and the parametric one are not stackable with each other! Prusa Mini version:…

Pobrania
58 409
Polubienia
17 507
Ocena
4,89
P
Printablesrcmz

Print In Place Tensegrity

Here is my take on the tensegrity table, a print in place version ! To tension the mechanism, turn the little nobs in the center using pliers I recommend printing the file with built-in support, they are very easy to remove Printed fine…

Pobrania
38 010
Polubienia
10 022
Ocena
4,62
P
PrintablesMatthew

Modern Gridfinity Case

This is my design for a case for holding Gridfinity bins. My design goals included: Clean design No Hardware Able to stand on ends and back Contents stay in place Easy to open and securely close Stackable Designed for 3D printing While I…

Pobrania
20 445
Polubienia
12 180
Ocena
4,9
P
PrintablesFH

MicroMax - SD card grip

In order to find the perfect fit for your setup, just print a bunch of these with different scaling in Y/X-direction (+/- 10 %). MicroMax Standard The card is recessed by 6 mm and will fit every typical card slot. I tested these with my…

Pobrania
12 650
Polubienia
4206
Ocena
4,69
P
PrintablesChewey

Oculus Quest 2 VR pistol grip - Fits Quest 3 controllers

IMPORTANT: This is just a model shell grip for a VR controller. NOTE: This is for the Oculus Quest 2/3 controllers. If you are looking for the Quest 1 version, see here . NOTE2: This will fit a Quest 3 controller, but it may be slightly…

Pobrania
8334
Polubienia
1355
Ocena
4,72
P
PrintablesMateusz Tokarz

Hex-Grip Bed Scraper – Print Removal Tool

🔥 UPDATE: V2 NOW AVAILABLE! An improved version (V2) featuring new side-grip grooves for better control is now out! 👉 Get the new V2 version here: This is a bed scraper / print removal tool designed to safely and efficiently remove prints…

Pobrania
6025
Polubienia
792
Ocena
4,81
P
PrintablesJerrari

GEN2 Gridfinity Drawers - STANDARD (LEGACY)

Two modular storage systems combined! GEN2 Modular Storage System is a modular rail system for mounting storage units under Lack enclosures and tables. Gridfinity by Zack Fre edman is an incredibly customizable storage solution that uses…

Pobrania
5718
Polubienia
3102
Ocena
4,93
P
Printablesecoiras

Joycon Grip with Front-Looking LED Windows

A Nintendo Joycon grip with front-looking windows for the LEDs. It prints without supports and the LED windows face forward, so you can see them right as you normally hold the joycon. The LEDs shine into a slit that arrives to a 45º…

Pobrania
5310
Polubienia
1015
Ocena
4,89
P
Printablesordnerino

+++UPDATED+++ Grind Setting Dial V2.0 Universal Fit - Eureka Mignon

The original finecoar Grind Setting Dial V2.0 for all new Eureka Mignon grinders Now also compatible with all* new Eureka Mignon models! For more information, please continue reading under Compatibility. If you'd like to buy a finished…

Pobrania
4968
Polubienia
364
Ocena
4,86
P
Printablesgbombadon

Golf grip training aid

Print upright on bed for best strength and accuracy, put the arrow marker at the top. I added a single support for the bottom tab that sticks out, and a brim for good adhesion. Otherwise, standard PLA works well for snapping onto a…

Pobrania
4793
Polubienia
394
Ocena
4,71
P
Printablesprntmkr

XXXS Bit Tool - Super-mini & Super-grip

Intro A super-mini tool designed to hold standard hex bits with exceptional grip and control. Its compact size makes it perfect for tight spaces, keychains, or everyday carry in your toolbox — yet it still offers a confident, textured…

Pobrania
4607
Polubienia
1335
Ocena
4,84
P
Printablesrolli-on-fire

Snack Gripper - ergonomic snacking tongs/sticks

When I discovered snacking tongs on printables, I really liked the idea and immediatly downloaded and printed one. They served their purpose, but they just felt wrong between my fingers. They were too bulky, heavy and they used a lot of…

Pobrania
4508
Polubienia
982
Ocena
4,87
P
PrintablesThe Next Layer

Gridfinity Caliper Holder - Low Profile Space Saving

This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…

Pobrania
4012
Polubienia
569
Ocena
4,71

Hexagonal Grid Generator in OpenSCAD v2

Version 2 - adds support for round grids, adds a parameter for outer wall thickness, and allows for quick adjustment of $fn (facets) on circular grids. Summary Hexagonal grids are a nice design tool when printing. They are regularly used…

Pobrania
3924
Polubienia
155
Ocena
5
P
Printablesdhiltonp

Gridfinity Battery Box: CR2032/CR2016, 357/303/SR44 and A23/MN21/AAA slots

This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…

Pobrania
2868
Polubienia
552
Ocena
4,9
P
PrintablesAllpa

Ice cream handle and drip guard for kids / Eis Handgriff und Tropfschutz für Kinder

Unfortunately, it is quite difficult for small children's hands to hold and lick delicious ice cream in summer. The melting ice cream drips, sticks and the sticks are very small and difficult to hold for long periods of time. With this…

Pobrania
2854
Polubienia
1193
Ocena
4,87
P
PrintablesEinfach Felix

Gridfinity cable Organizer

For bigger cabels: https://www.printables.com/model/1203677-gridfinity-cable-organizer-big-cabel-2x3 this is inspired by: https://www.printables.com/model/274250-ikea-alex-cable-organizer but it's completely redrawn with different sizes…

Pobrania
2783
Polubienia
372
Ocena
4,89
P
PrintablesM4NU

Dual Tensegrity - Connected Structures

These two connected tensegrity structures pull on each other. You can give them different hights and angles. Start with the tension of the two lateral threads (1 and 2), then the central thread (3) and finish with the external (4). Longer…

Pobrania
2444
Polubienia
421
Ocena
5
P
PrintablesCatja

Saab JAS 39 Gripen Kit Card

The Saab JAS 39 Gripen ("The Griffin") is a multirole jet aircraft in service with the Swedish Airforce since 1996. It is also used by the airforces of Brazil, Czechia, Hungary, South Africa and Thailand. This model is based on Kaboldy 's…

Pobrania
2260
Polubienia
523
Ocena
4,83
P
PrintablesViermalbe

Gridfinity Modular Drawer Remix

A remix of the great Gridfinity Modular Drawer System by Chipp Walters that saves 37% of filament, reduces print time and is also less challenging than Hexagon pattern remix by soulbrotherb. I added small stops for the trays, so that they…

Pobrania
2012
Polubienia
535
Ocena
5
P
PrintablesSaddamCZ

Customizable board game (Carcassonne) tile grids

My remix of a board game tile grid by garyacrowellsr with extended customization and minor bugfixes in the SCAD. Original version here: https://www.thingiverse.com/thing:25158 As is, the STL fits 45 mm Carcasonne tiles but can be easily…

Pobrania
1990
Polubienia
283
Ocena
4,97
P
PrintablesEightyeight

Herb Grinder

Small functional herb grinder, please use food safe filament if you intend on consuming the ground herbs. The small recesses in the centre are for small neodymium magnets, but they are not required for it to function. I printed this with…

Pobrania
1911
Polubienia
73
Ocena
4,67
P
Printablesweirdswiss

M-Lok ForeGrip AR15

Hello to all gun-guys and trigger happy people! I made an foregrip for my AR-15 in an extremly light, slim and tiny version, just to fit on your gun with M-Lok rail. I recommend to print with support and an infill of min. 50%. Like this,…

Pobrania
1909
Polubienia
408
Ocena
5
P
PrintablesPrecision 3-D

Replacement Nintendo switch grip

Second third and fourth picture are to show the difference between the original and the 3-D printed one original one is on the left and 3-D printed one is on the right To see the to see the original thing from Nintendo…

Pobrania
1898
Polubienia
505
Ocena
4,79

5 x 5 Grid Bed Level Test - Fits Prusa MK3

Simple bed level test - 5 x 5 grid of 25x25mm squares layed out in the shape of the Prusa MK3 Printbed.

Pobrania
1782
Polubienia
48
Ocena
4,93
P
PrintablesFabianVeile

Refillable Gravity Pencils + Ergonomic Grip Cover

Hi, I always wanted an affordable, uncluttered and reliable mechanical pencil that I can always carry with me. This is the 3d printed solution I came up with. It's a simple mechanism, allowing you to adjust the length of the leads using…

Pobrania
1684
Polubienia
780
Ocena
4,56

Ultimate Ender 3 Bed Level Calibration Grid (ABL workaround)

Update Jan 2024 - I added a third version (v3) with a center square and fewer connecting lines for faster printing / less filament usage! Update - I added a second version with connecting lines for faster removal from the bed Since bed…

Pobrania
1591
Polubienia
61
Ocena
4,75
P
PrintablesFabianVeile

Thin Grippers / Tweezers (Compliant Mechanism)

Hello, this is an early version of a compliant gripper which allows you to hold small objects that you can't reach using only your hands. So far I made four versions: Small rings (Ø20 & Ø14 mm): Short version - its dimensions are approx.…

Pobrania
1573
Polubienia
422
Ocena
4,69
P
Printableshoco

Gridfinity Caliper Stand

This 1x2 gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate. This model prints without supports, but I recommend watching the first layer go down to ensure the circles around the magnets all…

Pobrania
1558
Polubienia
404
Ocena
4,93
P
PrintablesROPI

Herb Grinder ROPI

⚠ Note: This is the very first prototype of the ROPI grinder. It works, but it’s basic. If you want the latest and fully refined version with stash chamber, durability upgrades, and smoother grinding, check out 👉 Herb Grinder ROPI with…

Pobrania
1532
Polubienia
186
Ocena
5
P
PrintablesLEN polygon

Minimalistic clothespin with 'snake-bite' grip

It's a medium sized clothespin, but as a single minimalistic part and print-in-place. It uses ‘snake-bite' style teeth to hold material together because it doesn't have any extra force pushing the clamp closed. The force is a little less…

Pobrania
1524
Polubienia
171
Ocena
5
P
PrintablesBram

Xiaomi Wowstick 1F+ #Gridfinity holder

Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…

Pobrania
1475
Polubienia
293
Ocena
4,92
P
Printables3DPrintBunny

Tensegrity print in place

This is a print in place tensegrity structure that is held in place by 4 strands of printed filament. When printing use the 0.3mm layer height, make sure ‘detect thin walls’ is checked and put your seams at the rear. When sliced you…

Pobrania
1348
Polubienia
234
Ocena
4,86
P
Printablespejvl2000

Screws labels for Gridfinity Bin

Screws labels with pictures of DIN912 screws

Pobrania
1201
Polubienia
440
Ocena
5
P
PrintablesThaliaFP

New Nintendo 3DS XL ergonomic grip smooth

I printed the model from Luckystrykx and have to say I didn't like the feel with the gap on the side. It had sharp edges, so I used Meshmixer to smooth it out. I recommend printing it at 97% in PLA because it does not shrink as much as…

Pobrania
1143
Polubienia
127
Ocena
4,75
P
PrintablesMarcusInCo

Gridfinity Parametric Divider Bin Fusion360 File

Based off Zack Freedman's pretty useful Gridfinity stoarge system. Original model I used can be found here: https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba More info on Gridfinity can be found here: I…

Pobrania
1040
Polubienia
111
Ocena
5
P
PrintablesAaronOaks

Gridfinity Spade Bit Holder

Holder for spade bits up to ~1" compatible with the popular Gridfinity organization system. I have designed different models for a variety of drill sets: https://www.printables.com/social/175706-aaronoaks/collections/313836 More details…

Pobrania
1007
Polubienia
236
Ocena
5
P
PrintablesJérémy Reeder
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
923
Polubienia
433
Ocena
5

Thermomix TM5 TM6 Stöpsel Griffabdeckung Plug handle cover

I lost the litte handle cover, so i made my own. Should also fit on the TM6.

Pobrania
923
Polubienia
63
Ocena
5
P
Printablesargoroots

Gridfinity base for Systainer 3

Gridfinity base grid for Festool Systainer 3 toolbox. Print 4 pieces and glue together or just in one piece if you have a large printer.

Pobrania
901
Polubienia
145
Ocena
5
P
Printablescodysechelski

Gridfinity 608 Bearing holder (with dust cover)

Holds 16 608 Bearings. Yeah, the same ones you have left over from the fidget-spinner craze 🤪 Because these often have a thin coat of oil, I wanted to add a cover to keep them dust-free, but the lid is completely optional The block is…

Pobrania
883
Polubienia
150
Ocena
4,8
P
PrintablesAaronOaks

Gridfinity Drill Bit Holder

Holder for Ryobi drill bit collection compatible with the popular Gridfinity organization system. I have designed different models for a variety of drill bit sets: https://www.printables.com/social/175706-aaronoaks/collections/313836 More…

Pobrania
882
Polubienia
231
Ocena
5
P
Printablesmethlon

Gridfinity zip tie storage

gridfinity zip tie storage (came back to look at this holder and saw just how many mistakes i had made, iv learned how to do a better job of it so hear the updated version) Added a taller version for the longer zip ties enjoy

Pobrania
853
Polubienia
212
Ocena
5
P
PrintablesIllia Shekera

Gridfinity Pen/Sharpie Stackable Tray 4x2x4

Features: - suportless magnet holes - easy to get the pen or sharpie from tray - stackable design

Pobrania
839
Polubienia
104
Ocena
4,89
P
PrintablesCtihy

Karak / Carcassonne 4x4 tiles grid / mřížka

U původní mřížky byly zámky na můj vkus až příliš volné, upravil jsem tedy přesnost zámků, těsnost políček pro dlaždice a trochu snížil výšku oddělujících křížků. Díky moc za původní model, který jsem jen lehce dotvořil ke své…

Pobrania
799
Polubienia
79
Ocena
4,9
P
Printableskennetek

Spiral Vase Gridfinity in OpenSCAD

Gridfinity by Zack Freedman is an open source design specification for printable organizers to optimize shop workflow. I felt that the provided Fusion models, while able to make many bins, were limited. They are not completely parametric…

Pobrania
790
Polubienia
137
Ocena
4,2
P
PrintablesGad_Gad

Snap-lock Pin for Gridfinity Screw Together Baseplate

Snap-lock pin for the screw together gridfinity baseplate by Kyle Warren. Itself Based on ZackFreedman design . Kyle himself describes his baseplate as “overkill”, and while I love the model, I don't quite need the rigidity of screws; I…

Pobrania
768
Polubienia
130
Ocena
5
P

Nürburgring Silhouette of the Race Track - Wall mounts

Hi Matching the Shiluette of the Nürburgring with LED lighting there are here the filigree spacers so that the light can shine cleanly outside. Please note: Update 02.03.2025 The shiluette of the Nürburgring is milled from wood and not…

Pobrania
764
Polubienia
124
Ocena
0
P
PrintablesCalebTimoteo

General Grievous - Star Wars Wall Planter

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint in support, use .3mf file) Scale it as you like :)

Pobrania
757
Polubienia
321
Ocena
5
P
PrintablesP_B1234

Drill sharpening tool for angle grinder 125mm

With this slip-on tool you can easily sharpen you drills. it will slip-on the protector (1mm with) of your angle grinder. I printed it with PLA but i think it is better to print it with ABS. Use brim and full supports only on the bed…

Pobrania
752
Polubienia
77
Ocena
5
P
PrintablesROPI

Herb Grinder ROPI with Stash Chamber V2

⚠ Note: This is the second version of the ROPI grinder. It introduced the top stash chamber and major usability upgrades. If you want the latest and fully refined version with further durability, smoother grinding, and overall polish,…

Pobrania
748
Polubienia
86
Ocena
5
P
Printableskvol

Grinch Sign

I'm a Halloween person. I made this little sign to hang on my door so that people stop asking why I haven't decorated.

Pobrania
744
Polubienia
214
Ocena
4,9
P
PrintablesRobertusMaximus

Electrical Grid Series - Switch Yard

Electrical Grid Series - Switch Yard Power is no small commodity in the war for freedom across the bloody wastelands of the home worlds. This is the Electrical Grid Series Switch Yard. Guaranteed to move with electromotive force all of…

Pobrania
733
Polubienia
105
Ocena
0
P
PrintablesJan Vejtasa

Ultimate Karak & Carcassonne tile grid holder

Catacombs of Karak is a great game full of emotions. Sometimes these emotions turn into dangerous movements and can distort cards on the table. This 4x4 grid helps with that. And oh yeah, its **stackable** and **connectable** too! You can…

Pobrania
733
Polubienia
92
Ocena
5
P
PrintablesMario M

Vintage guitar pick with great grip!

My favorite pick, the vintage Martin patent pick with on both sides a hollowed grip, is almost impossible to get. Time to make a replica. Both side hollow will be a next challenge, but one side is doable. This design gives a really good…

Pobrania
725
Polubienia
75
Ocena
4,75
P
Printablesrocketgonzo

Honeycomb Grid – Light modifier for Aputure MC

This honeycomb grid add-on fits the Aputure MC video lights . Due to it being friction mounted, there is no need for any modification whatsoever to the final print for it to stay attached. Just snap it onto the light and you're ready to…

Pobrania
714
Polubienia
88
Ocena
5
P
PrintablesDankof

Grinder drill sharpener 115mm

Description: This is a remixed version of the original drill bit sharpener, redesigned to fit a 115mm diameter grinder. It offers a compact and efficient solution for sharpening your drill bits with ease. Printing Configuration: Material:…

Pobrania
680
Polubienia
112
Ocena
5
P
PrintablesFH

FlexBox2 - Gridfinity Bin with Dividers and Labels

Years ago, I finished building the cabinets to store my hardware collection, but never got around organizing the contents. Now, I’ve finally transformed those chaotic parts drawers into a well-organized hardware stash. Starting with my…

Pobrania
660
Polubienia
306
Ocena
4,64
P
PrintablesAaronOaks

Gridfinity Countersink Bit Holder

Holder for collection of countersink bits compatible with the popular Gridfinity organization system. I have designed different models for a variety of drill sets: https://www.printables.com/social/175706-aaronoaks/collections/313836 More…

Pobrania
651
Polubienia
128
Ocena
4,86
P
Printablesramservices

TIG TUNGSTEN GRINDER for DREMEL

Re-design or Re-mix This was a new setup after trying some on else's (TIG grinder uses collet by jobstulus September 30, 2020). Not sure why so big but was a great idea to use the tig collet for support. It had merit as you just use the…

Pobrania
622
Polubienia
86
Ocena
3,33
P
PrintablesJerrari

GEN2 Grid Drawers

JERRARI3D.com The GEN2 Grid Drawers are part of the GEN2 Modular Storage System I designed which features a simplified installation method that allows you to rearrange and customize layouts in minutes. These drawers feature grid pegs…

Pobrania
614
Polubienia
100
Ocena
5
P
PrintablesMallonbacka

Gridfinity 2x1 business card holder

This business card holder is perfect for a desk drawer or Gridfinity-based desk organiser. Cards are stores at a slight angle, so overhang a little, but also can be seen quite easily if you have multiple cards side-by-side. It is designed…

Pobrania
592
Polubienia
55
Ocena
5
P
PrintablesJUCO

Gridfinity Dremel Bit Caddy

This caddy organizes my whole dremel collection with all different attachment requiring different gridfinity slot this caddy fits most of my dremel needs. This is model is by Zwierzak, Does a Thing on Thangs didn't see any good Dremel…

Pobrania
589
Polubienia
92
Ocena
5
P
Printablesfhessel

Gridfinity Generic DevBoard Holder

This holder allows to store development boards with pins mounted on the bottom in Zack Freedman's Gridfinity system . As such boards come in various sizes (e.g. different ESP8266 or ESP32 boards, Raspberry Pi Pico, Arduino Nano, …), the…

Pobrania
568
Polubienia
122
Ocena
4,88
P
PrintablesKevin Barker

Gridfinity Bin for Prusa Nextruder Nozzles

There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…

Pobrania
567
Polubienia
146
Ocena
5
P
PrintablesStevenVanHands

Herb Grinder Spoon/Knife

The knife spoon has a small handle to grab the knife without getting your fingers dirty. The included 3mf prusaslicer file uses an mmu2s to change the color of the handle, making it more visible if lost under the finer herb. There are two…

Pobrania
563
Polubienia
99
Ocena
5
P
PrintablesMatthias

Akku-Tragegriff für zwei Einhell-Akkus - Battery Tray to carrie two Einhell batterys

zwei Akkus von Einhell in einer Hand tragen die Akkus können auch einfacher getragen werden, wenn sie nicht im Gerät sind ideal für 36V Geräte von Einhell, bei denen zwei Akkus benötigt werden die Kontakte der Akkus bleiben geschützt -…

Pobrania
561
Polubienia
69
Ocena
5
P
PrintablesFraham

Gridfinity Tape measure holder

Gridfinity Tape measure holder

Pobrania
535
Polubienia
67
Ocena
4,8
P
Printablesmobiobi

Tensegrity Harp & Lyre Print in Place

Was going for a more striking yet stylish model to show off what can be done with a 3d printer. Designed for 0.3mm layer height, as the strings are 0.4mmx0.3mm. Probably won't scale well, but might be possible. Just need to watch the…

Pobrania
519
Polubienia
79
Ocena
4,67
P
Printablesswissbear

Tensegrity Stand

A small tensegrity (Tension-Integrity) study. I redid the CAD files from scratch to make it more stable and printable. Print instructions Print once or twice, scale to fit. If printed twice, the same sized parts can be put together.…

Pobrania
518
Polubienia
48
Ocena
4,89
P
PrintablesHank

Winged Dragon Tensegrity

This is a remix of the Low Poly Tensegrity Dragon by Mochi115 . I liked the concept of the tensegrity dragon with one tension and two support elements. I made the following changes Modified dragon model Eliminate need for supports Add…

Pobrania
510
Polubienia
187
Ocena
4,4
P
PrintablesKayuHD

Wasserhahn/ventil Knauf/Griff mit integrierter 7.7mm Rastbuchse / Faucet handle valve with integrated 7.7mm snap-in socket

Ich brauchte einen Ersatzknauf/-griff für meinen Wasseranschluss meiner Waschmaschine im Keller. Dieser hat die, meiner Meinung, nach unschönen Rastbuchsen mit 7,7mm Durchmesser. Ich hab ein stark verändertes Remix durchgeführt und tadaa,…

Pobrania
508
Polubienia
29
Ocena
5

Gringotts Dice Tower

Gringotts Bank Dice Tower - A cool dice tower I found on Thingiverse I added in a little extra support on the back nothing to fancy just to help it print a little better. The STL file is not scaled up but should roll a standard D20 just…

Pobrania
490
Polubienia
109
Ocena
5
P
PrintablesAaronOaks

Gridfinity Metric Sockets 1/4"DR

Socket set for 1/4" drive metric sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…

Pobrania
489
Polubienia
60
Ocena
5
P
PrintablesRipped

Gridfinity Box Parametric Solid Edge

If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped A parametric Modell of the standard Gridfinity Box in Solid Edge. If you set a Dimension to 1, the Model gets stuck. So if you want a 1x4 Box, Set 4…

Pobrania
486
Polubienia
20
Ocena
5
P
PrintablesJUCO

Gridfinity USB Cablemanager 1x4

This bin organizes my whole cable collection if you guys can see from the photos I use lots of USB Cables and keeping them organize was a challenge until now with this grifinity usb organizer I can pick i cable within seconds no thumbling…

Pobrania
480
Polubienia
61
Ocena
5
P
PrintablesPatrik

Gridfinity bins for CR2032 batteries

Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…

Pobrania
471
Polubienia
44
Ocena
5

socket holder bin 10-22 metric, gridfinity

Socket holder 10-22 metric The socket holder uses a gridfinity 2x5 bin. Its made for metric sockets 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 and 22. Used with 1/2" drive ratchet. Print with 10% gyroid/grid infill and no support. You…

Pobrania
469
Polubienia
119
Ocena
3
P
PrintablesAaronOaks

Gridfinity Dremel Sanding Band Holder

Holder for Dremel 1/2" and 1/4" Dremel sanding bands, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:

Pobrania
461
Polubienia
97
Ocena
5
P
PrintablesAaronOaks

Gridfinity Dymo 160 Tape Holder

Holder for Dymo LabelManager 160 label tape, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:

Pobrania
458
Polubienia
68
Ocena
4,94
P
PrintablesBram

LR44 Coin cell Battery #Gridfinity organizer

Design description This is a gridfinity holder for 10 LR44 Coin cell batteries. Block area is 1x1, and has a height of ⅓, stackable. Gridfinity description Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop…

Pobrania
456
Polubienia
45
Ocena
4,57
P
Printablesstixpjr

Trammel of Archimedes (nothing grinder)

Mathematical toy mechanism: https://en.wikipedia.org/wiki/Trammel_of_Archimedes Fully articulated model drafted in Onshape: https://cad.onshape.com/documents/d659bd7bc2d1aa257044b19d/w/c36c7990b68ed0b7e594a5ae/e/fd8c4be747739989452cc2a9…

Pobrania
456
Polubienia
88
Ocena
5

⛋ Grid-Board Display w/44 Characters

Scaling is not advised , but if you do, scale the characters also. I added a BLANK PIN so get to work on the REMIXES! All the characters are individual, so you can print any phrase. Print Grid Board in 1 or 2 colors with easy filament…

Pobrania
456
Polubienia
242
Ocena
5
P
Printablesgedeyenite

9 "Credit Card" Holder - Horizontal - 1x3 Gridfinity

I liked the ideas for Gridfinity credit card holders that were already posted, but I had a slightly different use case, i.e., a shallower drawer, and felt it could hold more to maximize storage space. I don't use a magnet system, so I…

Pobrania
456
Polubienia
41
Ocena
5
P
PrintablesOzRocky

Canon Speedlight Grid

I was after a grid for my Canon 580 EXII speedlight, but none of the ones I could buy really appealed to me. They all seem a bit “clunky”, held together with magnets, rubber bands or Velcro. I figured there had to be a neater way. These…

Pobrania
452
Polubienia
114
Ocena
5
P
Printablescookiecrook

Grinder/Cutoff Disc Holder (No Supports)

I couldn't find a good angle grinder disc holder that printed without supports, so I put this together. Print on the flat bottom and it should work without additional supports. Any filament will work, but I use PETG as the default for…

Pobrania
427
Polubienia
102
Ocena
5

gridfinity 1x2 bin dremel tools, spanner, chuck and std. dremel 3.15mm (1/8") tools

Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…

Pobrania
418
Polubienia
121
Ocena
5
P
PrintablesJan Votoček

Worx Landroid wheel spikes for better grip

A spikes for better grip that helps a landroid going uphill or in a sharp corner

Pobrania
417
Polubienia
30
Ocena
5
P
PrintablesRae

Gridfinity AAA battery storage

This model uses the Gridfinity plugin to Fusion 360. The modeling is fairly basic after that, a negative extrude with an edge fillet. This then uses the rectangular pattern feature to build out the rest of the slots for the batteries.

Pobrania
409
Polubienia
33
Ocena
4,8
P
PrintablesMadigan

Ultimate Snack Gripper Chopsticks

Features… Aerated handle with grip bumps for comfort, lightness, ease of handling and no-slip. Subtle, yet effective 3° bend at end of sticks for a solid grip on those snacks. Teeth at the very tip perfectly come together for picking up…

Pobrania
385
Polubienia
56
Ocena
5
P
PrintablesSteveW91

Gridfinity for Swiss Army Knife

Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699

Pobrania
381
Polubienia
71
Ocena
4,86
P
Printablesr31joel

Tanos/Festool Organizer Sys3 SysGrid Sortainer BasePlate

Tanos BasePlate Printed with Aurarum Black Petg Set Skirt to 0. Recommended printing with a .8mm Nozzle at .4mm layer height ([email protected] is great but time consuming) May add Parametric .FCStd if enough interest.

Pobrania
381
Polubienia
82
Ocena
5
P
Printablesbriancmoses

Gridfinity USB-A/USB-C Storage for 4 Devices (1x2)

This was inspired by Zack Freedman's Gridfinity project. I wanted to be able to store some of my frequently used USB devices (USB-A or USB-C). I mashed up a couple different objects together to make this 1x2 bin that will hold 4 different…

Pobrania
378
Polubienia
44
Ocena
3,5
P
PrintablesDaniel Vitanza

1x1 Gridfinity Dremel Accesories Holder

1. Introduction Dremel accesories holder for gridfinity......optimised to get a lot of accesories by 1x1 grid and with ease of use. 2. Revision History Version Description Date A.1 Initial Release 25/06/2024 A.2 Add more variants. Change…

Pobrania
372
Polubienia
63
Ocena
5
P
Printablestimbarnes

Gridfinity / GridZinity vertical pegboard hooks

These hooks snap on to the back of standard gridfinity bins, in heights 2u, 3u, 4u, 5u, 6u, 9u and 12u, with space for the stackable lip. Please note that the lip is required - it's the mechanism that allows the hook to grab the bin. They…

Pobrania
367
Polubienia
150
Ocena
4,75
P
PrintablesKeldor

Gridfinity 2x4x6 Hex Bin

A single Hex bin with 2 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…

Pobrania
365
Polubienia
61
Ocena
5
P
PrintablesOndřej Hladík

Angle Grinder Discs Holder

Holder for angle grinder discs. The discs are stored in two rows, the maximum disc size is 125mm. The holder is ideally attached with 4mm screws. Printing without supports, Infill: 10%. Share your printed model.

Pobrania
363
Polubienia
35
Ocena
5
P
PrintablesMiguel M.

Bandsaw insert (Grizzly G0555, King industrial KC-1433FXR, King KC-1401FX)

I designed this for my King Industrial 14inch band saw model KC-1433FXR, It also fits Grizzly model G0555 bandsaws as these are the same bandsaws with different branding…. This has a much smaller slot that lets you get in close with small…

Pobrania
363
Polubienia
51
Ocena
4,67
P
PrintablesCJ I.

All in One Angry Eyes Grille for Jeep Rancher by 3dsets.com

I found some files for the jeep rancher angry eyes but they were separate and required super gluing or screwing on. I had issues printing these and getting it to look clean due to supports being needed so I combined the two models and…

Pobrania
344
Polubienia
42
Ocena
5
P
PrintablesAdrián Vidal

Low profile pen display gridfinity

I wanted a way to store and display my pens that could fit inside a drawer.

Pobrania
343
Polubienia
63
Ocena
5