Liczymy pasujące modele…
Security Please follow the mounting instructions in PDF to replace plates and knobs Customize at your own risks ! Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability , add : 7…
Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 7 perimeters to plates 5 perimeters to the knob 15% Infill For Knobs' better grip texture, we recommend you to use…
There are 3 files available on this page : 1/ The DESIGN PIECE is the most important one. You must use it as the base to design your own knob that fits around the piece. 2/ The ADAPTATER is the part needed to mount your knob on the…
Added a V2 which provides a much better fit on the shaft than my first version. I've also extended the lip as it tore off on the first version.
I found that when using the thrustmaster th8a shifter on cars with less than 7 gears, i would sometimes accidentally put it in a gear that didn't exist. These gear blocker/fillers eliminate that issue when you are driving a car with 4, 5…
New Thrustmaster TH8S gear lever Variations: TH8Sss1 v1 - no screw needed, just fold and push TH8Sss1 v2 - push, use screw, put part 3 on and then part 2 No supports. Perimeter: 5 Material: PET-G Layer: 0.1mm TH8Sss3 - thread printing,…
I use the original jeoje's model but adding the plate for the handbrake, and the holes for the thrustmaster th8a. Assembly Instructions: This was designed to be assembled with 30mm M3 screws with 5.5mm nuts. Print Settings Rafts: No…
A simple print to hold your Galaxy Watch 8 Classic on the included charging puck. This also works with the Galaxy Watch 8 (non-classic) charger - the puck is the same size! Tolerances are tight-ish and set up for my printer, so your…
The Sparco gear knob is a popular low cost shifter for your Thrustmaster TH8A shifter, but the fitment leaves alot to be desired. This adapter securely mates the TH8A thread to the internal diameter of the Sparco knob with zero flex .…
A beautiful shifterknob i remixed Shortened and rethreaded to fit Thrustmaster TH8A Printed in Polyterra black 0.2mm
This is a replacement for the Shure SRH840 headphone joints (left and right) connecting the sliding band to the speakers. Each side is two parts. Connected with a rod. And two little caps to finish it up. That way you can print the caps…
Printing recommendations I've printed a first prototype in PLA, we'll see how long it lasts. Might print an ABS/ASA one and vapor smooth it for better finish. 0.15 LH 0.4mm nozzle No supports required Use high infill (I've used 50%) to…
This model was inspired by the design of DonKeulito . I needed to re-design the model as my angle of the tube it attaches to did have a different angle and I needed it for a different handbrake and shifter. The chair can still be folded…
So i modeled a shifter knob for thrustmasters new th8s shifter i noticed that there was none of these on the internet, i only found adapters and almost none shifters that fit on the adapters, so i decited to make my own it just slots into…
I designed a screw on shift knob for the Thrustmaster TH8A shifter. Just remove the old one and screw on the new printed one with a little presure from above. I used PETG.
TH8A shifter Playseat Challenge mount Robust shifter mount for mounting Thrustmaster TH8A to a Playseat Challenge sim racing chair. Printing Rotate the models as shown below. Use supports. Use at least 5 wall loops. Mounting Use six M6…
The plastic hinge broke on my pair of SRH840's, right where they pivot left/right and up/down. Instead of throwing them away, I 3d printed a replacement.
Playseat Challenge mount for a Shifter (TH8A/G29) with handbrake mount
accessories for sequential ordering attach the bottom plate add pins add rubber bands according to the required strength screw the top part 4x M4 print: material PETG perimeter 4 layer height 0.1mm filling 15% gyroid supports no old model:
Give your sim-racing setup a cobra-inspired shifter knob with a flared hood, detailed scales, a segmented belly and sculpted fangs. Cobra 90 has a shortened neck and a widened grip surrounding the mounting socket. The scale detail…
you should print this with supports and the infill density doesnt matter to much but also dont change the scale from what I have for it to fit. This is small and only takes 5 grams of fillament and it works on the Thrustmaster TH8S shifter.
Alex Zahnrad Z42-M1-H8,5-SW8,6 Die Kürzel heißen : 42 Zähne Modul 1 mm Höhe 8,5 mm Schlüssel weite der 6kt. Bohrung 8,6 mm Dies teil habe ich als Ersatzteil für einen Mini-Papier-Schredder für einen netten Kollegen kreiert.
Realistic Skull Shifter Knob – Thrustmaster TH8S A human skull from a real medical CT scan, with the official TH8S threaded insert built in. It screws straight onto the stock adapter, and the face points forward once tightened. Size: 53 ×…
I made this bracket because i bought one without a bracket and want it lower from the table. 2 M8 nuts and 2 M8 wing bolts are require.
A tiny blocker for the Thrustmaster TH8A shifter. It's a bit longer than other models, to block the path to the 7th gear. In a normal movement to the right, you will hit the print and with a bit pressure you can go into reverse. Print…
Some parts to improve scale looks of the car and also a bigger battery tray for the front that will be a direct replacement. Scale parts are the bonnet grills and a jerrycan. The 3mf file are correctly scaled as well as the grill .stl…
Cheap and long-lasting repair of critical design flaw in Shure SRH-840 headphones. I've owned many pairs due to them all failing by snapping at the connection between the pivot block holder and the adjustment arm My one pair of SRH-940s…
A shade for the Kessil H80 LED grow light to prevent light spread. 90mm top to bottom with cutout for cables/ bracket. If you need a different length let me know
A durable tissue box cover that prints efficiently. Couldn't find any models of a tissue box cover that would fit our local (EU) size boxes. The ones I could rescale to fit, would result in a waste of printing time and material. Even…
If you have installed a short shifter mod, you'll find that there is no protection from scratches on your gear lever stick from hitting the faceplate. Sure you can heatshrink some tubing, but that will only last you a week before you'll…
NOZZLE TEMP: 230 BED TEMP: 70 BED PLATE: PEI LAYER HEIGHT: 0.2 AMOUNT OF RAFT LAYERS: 3 MAX PRINT SPEED: 150 MM/S FIRST LAYER SPEED: 50 MM/S ACCELERATION: 2500 MM/S2 MATERIAL: PLA INFILL: 25% COOLING FIRST LAYER: OFF COOLING OTHER LAYERS:…
Remixed Harsesis Playseat Challange Shifter (TH8A) and Handbrake (Moza HBP) mount according to his recommendations which was to move the hand brake a bit further to the front and the shifter a bit to the outside (right). Also added slots…
Made a replacement for the TH8S shifter screw clamp. Included a .step file of the project in case anybody wants to tinker with the design.
With printed 3.5mm pads Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Doesn't Matter Resolution: 200 Infill: 50 Filament: CCTREE PLA Category: Hobby
The Boards you need are from daver18qc, you need them scale up to a lenght of 160mm. https://www.printables.com/model/9497-110-scale-maxtrax-mkii-traction-board the holder for the spare tire is with 12,5mm offset to the right side
Every wasteland war machine needs a gear knob forged from its own engine. This knob turns a classic engine piston into a snarling skull: three ring grooves on the crown, the wrist-pin bore through the side, and a skull face carved into…
Extension of G7 Block to help shift to 6th and lockout Reverse. STL has some extra bevels from photo to make in install easier.
My collection of custom shift pattern plates for the Thrustmaster TH8A Shifter for use with ETS2 and ATS. The following gearboxes are covered: Scania 12 and 12+2 Volvo 12 and 12+2 ZF-12 and ZF-16 Eaton Fuller 10, 13, and 16 There is also…
I've done a couple of changes since the original model: Made it a bit shorter (doesn't affect the overall length as the thread is in the same place). Split the model into 3 to print the middle part in a different color.
I bought my shifter used.. with no clamp, sounds like a project for the 3D printer. The clamp turned out pretty tough, seems with withstand the abuse. Only time will tell. Brief Instructions: -To reinforce and add to the longevity, i left…
Model includes some clips on 3-4 throw to hold in place. Simply take gear knob off to install. With the existing throw mechanism the throw can't be made much shorter otherwise it may bounce out of gear. With the slightly shorter gear…
A shifter mount i made to side mount onto a piece of 8040 so that i could have both my sequential shifter from moza and my thrustmaster th8a (with trucking shift knob) at the same range from my seating position. Uses 4xM8 bolts (with…
Schrittmotor Kurbel mit Zahnrad D6-SW3-H8-Mod1-Z15 und Schrittmotor Kurbel mit Zahnrad D5-SW3-H8-Mod1-Z15
I designed this to try to match the feel of my GT86. I printed mine with 80% infill for the extra weight.
A mini shift knob for thrustmaster th8s its print in place model that doesent need any screws or anything, just pop off the printer and use it fits snugly on the saft, so just push it on and play no supports i used brim, no need to use it…
An ergonomic, ventilated knob for the THRUSTMASTER® TH8S shifter in the sizes small, medium (recommended) and large. Check also my DRIFT Knob for the THRUSTMASTER® TH8S Shifter . Please don't scale the parts: The thread and the fits are…
Brackets for Govee H706C Permanent Outdoor Lights Pro Remix of https://www.printables.com/@Gelap https://www.printables.com/model/630613-govee-permanent-outdoor-lights-pro-mounting-bracke
No other tools required. I printed it with the sturdy profile, arachne, and a 0.6mm nozzle on a P1S.
The hole is 8.5mm so you can take a M9 thread cutter to make it fit on the original shifter pole.
A customized MagSafe iPhone mount for Samsung C34H890WGU - CH89 Series, made by a 3D scan and stoneburner's OpenSCAD design. P.S.: It seems there was an export issue with scaling. Cura scaling to 10000% works. For other slicers scale to…
Ecken-Schutz D40H8 Zum aufkleben z.B. auf die Ecken einer Glasplatte eines Tisches.
Refrigerator Drawer Divider for LG Fridge Beverage Drawer Since the LG fridge only ships with one divider for the beverage drawer, the draw fits four, and they won't sell you any more, Davoxt saved the day with his model! (go show him…
Botao de Câmbio Personalizado PRUSA Thrustmaster TH8S Shifter
Lens hood LH830-02 for the original Sigma 50mm f/1.4 Art lens
A mod to reduce the shifter to a 6-gear version. No more accidentally slide into the 7th gear while shifting into 5th.
Overview A simple Knurled Knob that can be optionally weight with a medium of your choosing. Designed for the Thrustmaster Custom Shifter Knob contest - hit that like and follow to help me out. Printed Parts Knurled Knob Comes in either a…
The intermediate apparatus I designed to attach the Scania gear shift knob.
TH8A Shifter Mod Block to make the shifting feel more tactile.
Scania 12+2 , Volvo 12+2 , Eaton 18 , ZF 16 pro řadící páku TH8A
Remix of just the surface part from https://www.thingiverse.com/thing:3569302 to provide the bolt holes for the TH8A. There are several other TH8A remixes out there - but they also tend to merge the surface and outer bracket. I am…
A horned hannya designed in ZBrush
A Hotwheels model of the Annis Elegy RH8 from GTA V based on the Nissan GTR. To get the model to Hotwheels scale, resize it to 69.17% in your slicer. For wheels, use any standard 11mm Hotwheels wheels. To install the them, either drill a…
TH8S Hot-Swappable Shifter Knobs – 4 Designs in One System Customize your Thrustmaster TH8S shifter with this hot-swappable knob system! Choose between four different knob designs and easily switch between them depending on your driving…
Used to attach a unifi us8 to HSW. Needed to print with 100% infill or the honeycomb pegs would snap off easily
This is a pair of support brackets that allow to mount a Lenco SB-080 soundbar just below the screen of a Sony Bravia KD-43XH81. The brackets mount to the TV where the stands would usually be, so obviously you will need to wall-mount your…
I modelled the shift knobs of the best european cars so you don't have to! I hope it will make your sim racing journey more immersive.😊 The bundle contains 12 shift knobs some of them needs glue to assemble. Pictures of printed examples…
Shift knob with an iconic design inspired by a pistol grip. Surprisingly comfortable and provides a great grip when changing gears. If you race muscle cars in games, it’s basically required by law that you use a pistol-grip shifter. There…
Print at whatever resolution you like scale up to your needings (I found 102% scale fits well my 8mm rods) bushing first of his type, here in thingiverse : found the mockup of this exact bushing but without any groove on the inside. I…
This is an adapted version of the shift knob I originally designed for my personal sim racing setup. I’ve redesigned it to be compatible with the Thrustmaster TH8S , using the official adapter, while keeping the classic…
Same bottom profile, and requires rubber feet.
Turn your sim racing setup into something extraordinary with CobraShift, a custom shifter knob inspired by the iconic shape of a cobra. Its sculpted snake head and flowing, curved body create an aggressive, organic design that makes every…
Thread pitch - 1.25 Thread diameter - 10mm Compatible with Logitech G25, G27, G29, G920 and Thrustmaster TH8 Print PETG with 15% infill ASA - not tested PLA - not tested
EPOMAKER TH80/66 Pro Volume Dial with Totoro from "My Neighbour Totoro" Features: The Totoro figure was designed by Patrick @Patrickart on Thingiverse Permission to remix was obtained from Patrick!! Print Settings Printer: Creality Ender…
I made a ball shape knob that is directly mountable on TH8S and fits well in average hand. Updated for knob contest.
Reversed Shift Up/Down version provided I quickly painted the letters with a Sharpie pen for the photo, but I recommend a white pen/whiteout for better visibility (or use multiple filaments) Assetto Related - Uncheck H-Pattern mode in CM,…
Skull Racing for Thrustmaster TH8S Shifte
This is a slightly altered version, intended to be printed with TPU (flex) as I don't like the idea that the metal shaft is simply rubbing against rigid plastic. I'd describe the feeling as “dampened”. It's still notchy and tactile but…
CraVeg's Case for the Fish8840 or other RipOff Component Testers but with exposed SMD testpads Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX Rafts: No Supports: No Resolution: 0.3 Infill: 40% Category: Electronics
Die Vorrichtung für denn Schwamm hat ein Lochdurchmesser von 40mm. Halterung ist auch nicht im Weg wenn man denn Lötkolben Benutzen möchte. Die Box wurde sehr pass genau Gebaut, wenn es bei ihnen nicht direkt rein passt einfach etwas…
I was sick of my positioners being a jumbled mess when i took this tray down from my tool board, i designed this to fimly hold all my positioners tight enought that you can shake the container upside down and they will still be retained.…
Mad Max: Fury Road – Shift Knob Knife (TH8S Custom) Bring the post-apocalyptic world of Mad Max: Fury Road to your racing simulator! This custom 3D-printable shift knob is inspired by the iconic bone-shaped knife design from the movie.…
Pickle Rick Shifter Knob for Thrustmaster TH8S First he turned himself into a pickle, funniest shit you've ever seen, now watch him get transformed into a custom shifter knob! Designed specifically as a drop-in replacement for the…
Removes the "TM" ("Thrustmaster") on top of the knob to help with my printers limitations. No other edits, only the top circular knob part included.
Another take on the THRUSTMASTER® TH8S shifter knob - this time less conventional but with all the pros of my first version, the ERGO Knob . Please don’t scale the parts: The thread and the fits are sized for the THRUSTMASTER® adapter.…
A normal monitor arm might not fit into the bay of a Samsung LU32H850. This adapter moves the connection point outwards that you can use oversided VESA plates. Additional required material 4x M4x20 instead of the standard VESA srews
An open, organic lattice cage wrapped around a twisted helical core, so the core seems to spin through the windows from every angle. It has four printed parts, needs no supports, and gives a two-colour look on a single-colour printer.…
This is a fan bracket for a Supermicro AOC-S3108L-H8iR RAID card. Model was made from scratch, inspired by the design of https://www.thingiverse.com/thing:3646996. Designed around a Noctua NF-A4x10 PWM fan. I printed on a Prusa Mk3s+ with…
How I mounted a WeatherFlow Tempest weather station to my backyard fence gate post. Print Settings Printer Brand: Prusa Printer: i3 MK4 **Rafts:** No Supports: No **Resolution:** .2 mm Infill: 35% **Filament:** SUNLU PLA+…
Remove the original screw clamp and screw in the adapter either from the top or the middle. An M6 (longer than 30mm in length) screw can then be inserted from the side with the flange to secure it in place.
I was not happy with the flat top knob that came on with the Thrustmaster TH8S shifter so I made my own round ones based on various nylon shift knobs I've seen on race cars. Keys into the metal shaft and secures with the original T15 Torx…
This is very self explanatory, a pickle for you to shift gears. This is just epic. upvote to see me print this in matte green pla and actually use it. I didnt expect for people to actually print this. Guys and Gals... variable layer line…
Ever wanting to try drift up daring heights just like Ken Block. Well then, print the ALL NEW Hoonigan Shifter Knob designed to fit the TH8s Racing Wheel Shifter. Split in two peices to put together when you want to go drifting, racing,…
Sometimes, less is more. I wanted to create a shifter knob that doesn't try to turn the TH8S into something completely different. Instead, the goal was to give it the look and feel of a clean, classic manual transmission shifter while…
Support chargeur M9 AEP, H8R et combat zone
Classic JDM Tuner Shift Knob for TH8S A sleek, classic JDM-tuner style shift knob for your Thrustmaster TH8S shifter. It features a slim, elongated cylindrical profile with a smooth rounded top and a tapered base. Four horizontal grooves…
Overview When your mobile suit has a manual transmission you'll need this shifter. Assembles with minimal extra requirements - mostly glue; although I'm working on tolerances to make the pegs tighter for snap-fitting. Printed Parts -…
This is a remix of the original TH8S knob adapter. While the original design was limited strictly to the TH8S, this remixed version enables you to use all the custom shift knobs created for the TH8S contest on your premium Thrustmaster…
AEROLITH — Custom Shifter Knob for Thrustmaster® TH8S Sculpted for control. Designed for the drive. Give your sim-racing setup a distinctive upgrade with AEROLITH , a custom 3D-printable shifter knob designed for the Thrustmaster® TH8S.…
Purpose: I need to plug in and out the dongle of my Logitech Headset headset regularly. Using the original storage inside the headphone is not very handy. For this reason I designed an external dongle holder which can easily fixed on the…
