Liczymy pasujące modele…
UPDATE : [May 14, 2024] Added STEP files. NOTE : This set of prints is now complete, with the sizes and dates added as follows : 05/18/22: #4,#6,#8,M2,M3,M4 05/10/22 : #10, M5 05/19/22 : 1/4",M6 05/10/22 : 5/16", M8 05/19/22 : 3/8",M10…
This is a 3mm, 4mm, or 5mm knurled knob that has a bolt and nut into it. Used to screw into threads of a heatset or 3D print that has threads printed into it. These can be printed with no supports.
Just plain honecomb storage wall glue stick tray for glue sticks up to 32mm
Work in progress model not fully tested Ryobi HCS 1250Circle saw guide rail adapter. Allowing you to use the Ryobi circle saw (185 blade) of on a Makita (or similar like festool and other brands) guide rails. It has adjustable trim blocks…
This is a remodel of the Capra headband yoke supporting the DMS Omega cups, utilizing M3 flat head cap screws. I was dissatisfied with the available remixes, as they were not made with FHCS, nor to be tangent to the cups of the omega,…
Same thing as original design but You can use 4x BHCS M5x16 instead of 4x SHCS M4x16. Also M5 T-nuts fit just fine into the wheels. All parts are adjusted to fit M5 main tensioning bolt.
Chee's Beefy Front Idlers , carrier part for Voron Trident, version for M5x16 screw instead of 5mm pin -- remixed to fit the slightly larger head of button head cap screws (BHCS) currently provided in LDO kits.
A very simple endstop riser that uses M5x16 BHCS bolts that you may already have from your 2.4 build. I use the 12mm version, but you may want to use a slightly longer one for some more clearance. Friendly reminder to check your Z endstop…
Quick remake of the handle to be compatible with a common M5 x 40 SHCS. Aesthetics influenced by the original handle. Includes a cosmetic cap which should be a tight friction fit, no glue required.
Found that the Remix from @ReneDifferenz_299585 are a little bit to low for M3x6 screws and the head of the shcs arent deep enough into the Holder. So i remixed it.
A wing-nut shaped piece that is designed to be pressed onto the head of an M6 Socket Head Cap Screw (SHCS) and turn it into a hand-turnable “wing-bolt”. Hopefully the pictures make it clear I used an arbor press to press it on, but you…
I started with [thingiverse/thing:3738687 by SantiMZ], and added an assembly for the ESP32 and the associated electronics. All parts are inserted in a standard PVC pipe which is fixed on top of a water tank. A mobile cover protects the…
This is a very simple remix that allows you to attach your multitool to the HCSW (Honeycomb storage wall). The multitool can be inserted as you like (see pictures). The model in the picture was printed without supports with a layer height…
This is a series of great power supplies: Presets, Remote Control, Programmable, USB for realtime-remote monitoring and control, stable, low noise, powerfull; all you want! The only downside is that due to the fact that a power-on always…
Realizzato con Fusion 360, stampato con filamento PLA+ Sunlu
This model allows you to mount your PlayStation portable 2000 to the honeycomb storage wall. I will hopefully update this model for better stability and security. I hope you enjoy!
Stock option for the B17 bullpup lower for the M17. This option utilizes a few air fitting parts from the Hybrid Combat Stock to function. Will also need M5 screws and nuts to assemble.
This model allows for the storage of gba games on your HCSW
Found the original by @Dabal_640841, but didn't have any sockethead screws in the sizes suggested., however, I had a bunch of M5x10 BHCS (button head) from my Voron build. Revamped to fit the wider screw head and 10mm length to match the…
Stock option for the B17 bullpup lower for the M17. This option utilizes a few air fitting parts from the Hybrid Combat Stock to function. Will also need M5 screws and nuts to assemble.
This is a remodel of the Capra headband yoke supporting the DMS Omega cups, utilizing M3 flat head cap screws. I was dissatisfied with the available remixes, as they were not made with FHCS, nor to be tangent to the cups of the omega,…
4 countersunk sunk inserts on 1 build plate for quicker work flow. I made this to upload to my printer.
I needed a screen holder for my screen that I use for Kilpper Screen on my RatRig VCore3.1.
Updated design to fit the M5 SHCS bolts my LDO Trident kit uses.
It has just been remixed for use with SHCS screws, therefore the thickness of the backboard needed to be increased. I used M2,5 x 12mm screws.
This is a simple, quick to print knob to press on to the head of a M5 Socket Head Cap Screw (SHCS). It's intended to be a press-fit onto the screw. I used a vise to press it on to the screw immediately after printing while the part was…
Remixed to use on GT2 16T with M5 spacing from Creality printer. Also reinforced the body to decrease flexing.
This print was made for a 6mm SHCS, but the idea can easily be adapted to other sizes. This was made for use with my benchtop mill gib lock. Originally the gib lock used a lever type screw, but the mill vise was always interfering with…
Some equipment in my shop uses M8 socket head cap screws which are prone to collect metal shavings and other junk in the hex socket. I made these socket plugs to put into the socket hole - they do not keep junk from collecting, but they…
Remixed bottom, so i could use SHCS Screws to mount it together. Remixed top so i dont have the Fan Mount.
After spilling a small box with multiple sized SHCS M3 screws I got frustrated said there must be an easier way! A SHCS is a Socket Head Cap Screw. I typically use these for my 3D printed projects. The measuring tool is very specific to…
SHCS M5 measuring tool this is measuring screws to verify the size quicker.
These were created to fix an issue I had with my Dragon Burner contacting the rail stops on my Z axis. The regular size stop uses an M3x8 FHCS, whilst the shrunk one uses an M3x6 FHCS, and protrudes less in Y and Z.
