Liczymy pasujące modele…
Hi, I always wanted an affordable, uncluttered and reliable mechanical pencil that I can always carry with me. This is the 3d printed solution I came up with. It's a simple mechanism, allowing you to adjust the length of the leads using…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
About I love 19 inch rack gear and I try and rackmount everything I can in my audio and home tech setup. Cutting aluminum beams isn't always an option so I thought I would make a custom setup for my electronics workbench to tidy up the…
Wydruk około 14,42 €–17,62 € nettoWstępna wycena jednego wariantu
I designed one support rail with an edge/guide at the left side (for proper alignment of the cutting mat) and a generic rail without edges to be used in the middle and at right side. Each rail comes with two parts for easy and stable…
Wydruk około 4,05 €–4,95 € nettoWstępna wycena jednego wariantu
No more scattered pencils! This practical and stylish box is designed to safely store up to 24 colored pencils or pens with a length of approximately 175 mm and a diameter of up to 8 mm . Perfect for students, artists, and creative souls.…
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
Background I wanted to print the original with rails however because of the fillets they would require supports or would print with droops. I used the provided f3d file to slightly narrow the bridge and instead use a chamfer on the rails…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple little magic trick that makes an object appear to be split into three pieces and then repaired back to its original shape. I saw a video of this trick online and wanted to model one myself. Can be used with the included stick files…
Wydruk około 9,17 €–11,21 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 2,55 €–3,12 € nettoWstępna wycena jednego wariantu
Beverage Can Opener against Broken Nails A keychain tool for opening beverage cans preventing broken nails or nail polish. Key Features Anti-slip curved thumb rest for user comfort with dirty or wet fingers Easy tab lead-in enables a…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Zalman Z3 Plus HDD rails Yes support PLA
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 15+ Supports: No Print Orientation: Flat side down Vectors image by SVG Repo : https://www.svgrepo.com/svg/477542/pointing-glove
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
There are plenty of fenders out there for the Onewheel XR, but not that many for aftermarket rails like the Floatlife Varials. Here is my version of a mini fender for WTF rails. Check out my Onewheel Collection – I have also designed a…
Wydruk około 7,01 €–8,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is one of my most popular designs and was originally printed in 2011 on my McWire RepStrap. It has since been downloaded from various .stl repositories over 100,000 times. If you print this model, please share your make, and leave a…
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
Armorial Shield Details. Designed using Automatic 111 absolutereality_v181.safetensors [463d6a9fe8] - Prompt: <lora:engraving (1):1> engraving, black and white, armory shield. Displacment of image used on subdivided cube x7 . Learned how…
Wydruk około 1,94 €–2,38 € nettoWstępna wycena jednego wariantu
Français en dessous :) __________________________________________ Here's a simple guide to allow you to easily tap M8x1.25 threads into the core of a 4040 Aluminum profile. This works perfectly with this kind of extruded profile:…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I love the Analogue Pocket and its dock. However, the dock has an annoying design flaw. The dock's USB-C plug is slightly taller than the recess it sticks out of. These guide rails (ugly, but functional) make it much easier to line up the…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I disliked the factory drawers that came with the Akro-Mils 10116 organizer, but I liked the shell, so I decided to make my own drawers that fit my needs. Can fit up to 50mm M3 screws. Printing Instructions: PLA 15% infill I will continue…
Ski Trails Font is a unique font mimicking the trail that a skier leaves in their wake. Scaleable and easy to print. 0% Fill 0 Top Layers 2 Perimeters
Wydruk około 2,27 €–2,77 € nettoWstępna wycena jednego wariantu
The Raaco assorter boxes seem to fit perfectly into a Kallax shelf. So why not make a rail to be able to draw each one out individually? The thin vertical bars help with assembly if you want to stack several rails on top of each other.…
Wydruk około 2,87 €–3,51 € nettoWstępna wycena jednego wariantu
I have a printed version to screw together. The glued version works the same way. Screw M3x10, Nut M3 You can combine multiple bridges and rail lengths. For going up and coming down, use Rail up and down (wooden rails) od autora Jakub…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
This tin can comes with no tray on it, just made 2 stackble trays you can put into the can and keep pencils organized
Wydruk około 3,14 €–3,84 € nettoWstępna wycena jednego wariantu
Support pour les outils basiques de jardinage. Print instructions Imprimé en PETG - buse 0,6 mm
Wydruk około 5,47 €–6,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Paint stencils to indicate the tire pressure for military and offroad vehicles. 0123456789. kPa, ato, atü, psi, Bar.
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Simple, low profile guide rail to help you line up your Analogue Pocket while using the dock so you don't scratch it. The rail needs to be stuck to the dock with double-sided tape. For a beefier, non-stick solution, see…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Study Details
Wydruk około 2,69 €–3,29 € nettoWstępna wycena jednego wariantu
I designed a pencil holder for my little 2-year-old niece. She is just learning to draw but always had problems taking the pencils out of the packaging. Now she can do it without any problems. The holder is designed for a total of 12…
Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu
Very nice piece of art in smooth and low poly style. Place it to your living space or in your office as eye catcher. Also a nice present for valentine or birthday. Take a look to my models, there you can find a lot of other low poly…
A whole lot of Sonic the Hedgehog characters. For characters like Tails who float above their platform plate, there’s a version with a connection. Includes: Sonic Tails Knuckles Shadow Silver Rouge Espio Charmy Vector Classic Sonic Blaze…
A 3d printed MGN-style linear slide bearing Ive decided to make my own linear rails when i saw prices for a good quality MGN rails. I hope that this project will allow more people to tinker freely without spending a fortune! This project…
Various Brio train tracks and switches Lots of track study and design for the joy of the kids :-) Thought I'd make it publicly available to play with. Let me know if you need another one, a combination, a female only track and so on! If…
Level up your desk game! This isn't just a sticky note holder; it’s a complete productivity toolkit. Designed with a built-in pen slot and a dedicated storage bay for custom stencils, this model helps you turn a plain square of paper into…
Easy printable pencil holder. Size cca 15 x 15 x 12(height)cm. It can be printed without support, because are used max. 45° angles. Filament need cca 50m (0,2mm, 2 wall loops, 15% infill). Tower inside diameter 49mm. Second models:
Based on my basic Brio rails [1], I created flexible/bendable rails in three different sizes (S, M, L). I find these rails pretty helpful, as sometimes you just need on little rail that's missing and with these flexible rails, you can…
License: Free for Personal use only For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails (Instant access to 44+ models) Hey everyone! 🐶☁🤍✨ I'm so excited to share my newest design with you all — this…
First set of Sonic figures based on Team Sonic. Set inludes · Modern Sonic (SSBU Pose) · Modern Tails · Modern Knuckles · Super Sonic (SSBU Pose) (Don't have pics sorry) · Super Sonic V2 (Original Pose) All my figurine models will always…
I found a couple of rails here on thingiverse but wasn't satisfied with the performance results when building a track with it. Therefore I designed my own rails from scratch, including a 4 and 5 tile overspan. Check those YouTube movies…
Guide Rails for the festool sustainer 3. There are 4 versions Version 1= Cut in half so they fit smaller printers with ribs on the bottom Version 2= Cut in half so they fit smaller printers with solid buttom Version 3= Full size with ribs…
I pretty much just took the model 660 uploaded, chopped it up, and put it back together so that the s-foils (wings) are in 'attack position', or the distinctive X shape that we all know and love from the movies. I would recommend printing…
I noticed that sticky note boxes usually lack a lid design. To enhance portability, I designed an integrated lid that not only provides a new option but also makes carrying and storing sticky notes more convenient, while also…
Assembly is a bit difficult because it has to be screwed together in a specific order, but I made a video about it. I hope it's helpful. Most of the models in the All.3mf file are equipped with support and seam and oriented to fit even a…
Set of rails: Strainght in 2x, 1x, ½ and ¼ of standard length. Flexible rail in 1x standard length. Curve in 1x, ½ and ¼ standard length. Two way crossing in 60° and 90° Three way crossing Truntable in 1½ of standard length. Turnout…
Set of six templates for coffee and dessert decoration.
Update 3/10/25: Added 2 new components, the side rail with integrated handle, and the side rail stacking connector. These allow for more customization as well the ability to add more rail sections. See details below. Update 3/8/25:…
Can be used for DIY RC Airplanes, education and more. If you want other models of NACA airfoils, feel free to comment. Included models; NACA-0012 NACA-0015 NACA-1812 NACA-2212 NACA-2312 NACA-2408 NACA-2412 NACA-4412 NACA-5416 NACA-7712
Model is made for 76 x 76 mm sticky notes. A multifunctional sticky note / Post-it holder designed for desk organization, note taking, and everyday planning. The holder stores standard adhesive sticky notes while also providing several…
This has some orginal models and some remixed models from Fabian. I recommend using the light grid and hot gluing it into the drawer to prevent sliding.
MOUNT GEN2 UNDER ANY TABLE OR DESK GEN2 Under Table Rails turn the dead space under any desk, table, or shelf into slide-and-lock drawer storage. Screw the rail up once, then slide GEN2 cases in and rearrange your whole setup in seconds…
This is my third Core XY conversion kit for the Ender 5 with Linear rails. Previous versions here, updates at the bottom of the page. MK2: https://www.thingiverse.com/thing:4777606 Mk1: https://www.thingiverse.com/thing:4650517 As per the…
I don't like to throw all of my utensils into one big container, so I've designed this internal divider for the Ikea ORDNING utensils holder. It's designed to snap into place (the upper part has a lip that grips the edge). There's also a…
Brand: Yonex, Victor, Li-ning, FZ, FUKUDA, Mizuno
this is a airless basketball
Heyho I make knifes and for the handles I dont want to use my very heavy height ripper all the time. So I designed this height marking device to use with a normal pencil (7 mm). There are two versions. 1. 7,5 mm - 65 mm markable height.…
PLA or PETG without support only with solid bottom.
3D Printing Guide for Cute Anime-Style Chibi Girl Model (Optimal Settings & Tips) This guide will help you achieve the best quality when printing the Anime-Style Chibi Girl 3D model. Since this is a detailed, decorative model, following…
These are straight rails for use with Gravitrax Print instructions Category: Mechanical Toys Summary These are straight rails for use with Gravitrax
To extend my son's wooden railway kit I originally printed some tracks from this set . It has a great variety of model, but unfortunately the connectors are too big to fit (at least the current) version of Lidl/Playtive wooden tracks. So…
Flexible rails for IKEA LILLABO, BRIO, LIDL train track Flexible rails which help to easily build the train track compatible with IKEA LILLABO, BRIO, LIDL The difference of this rails is the end - sometimes you need male-male of…
Bendy train track for non-standard curves
A stencil for christmas coffee How to use it To begin, hold the coffee stencil over the top of the cup of coffee or espresso. Using the small spoon or scoop, sprinkle a thin layer of ground cinnamon or other spices over the open areas of…
While many types of curved rails are available, I found that the types I wanted to use were rarely available and that many had very tight connections, making them difficult for me to use. Therefore, I decided to make my own. I also made…
This is a full Linear Rails mod for your Ender 5 s1 for the X and Y axis. This GREATLY improves rigidity and precision, and lowers the weight of the gantrys by 25% to 30%, which means greater quality at higher speeds. Also less unsprung…
The original Shade Foregrip had wide top brackets so it would clamp down securely to Nerf-Rails. However this prevents it from being mounted to certain low-profile Picatinny rails (for example the one found on Worker Retaliator pump…
Pencil stand easy printable 10 versions.
🌼 Spring Bouquet of Easter Daffodils Treat yourself or your loved ones to a 3D-printed bouquet of daffodils! This step-by-step guide walks you through printing, shaping, and assembling – for real springtime moments. Show off your skills…
HO sorta scale steel coils for gondola cars. Print coils on sides and coil holder flat. No supports required. I've included a completely round coil for use with the holder and a coil with a flat bottom so as to not roll around in the car.…
Lirilì Larilà in high details Supports must be enabled, be careful while removing them around the tusks Dimensions: 55 x 35 x 60 (mm) I used around 17 grams of filament in total
Kingroon KP3S - Z axis Linear Rails: This is a upgrade for kingroon Z axis, with this upgrade you have a best result on Z axis and you can increase the Z-height of your printer to 225mm. In the attached documents you will find a pdf with…
This is Hooky the funny, helpful multifunctional snake hook I designed it for multiple use cases for my Ford Nugget Fiamma F45s awning, where it does a great job. It fits in the 7 mm Keder rail and locks itself under load. It is very…
License: Free for Personal use only For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails (Instant access to 44+ models) Hey everyone! 🦖✨ I'm super excited to share my newest Fluffy Tails design with you all…
Cable Wall Clip for Nails Hey maker! 👋 Keep your cables tidy without buying huge packs from the DIY store. Features: Simple, fast-to-print design using minimal material. Three sizes included, or scale it yourself for custom fits. Perfect…
This is an insert / organizer for Great Western Trail 2d ed. and the Rails to the North expansion. It all fits in the base box, has no lid lift (as long as your player boards are flat), supports premium sleeves on the cards (Gamegenic…
This is a print-in-place telescoping holder for colored art pencils. To raise it, grab the handle, twist clockwise, pull up, then twist counterclockwise to lock in place. In the raised position, you can easily see all the pencils. To…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 I designed these hands for my costumes. Catwoman: https://www.printables.com/model/678691 They may also be useful for…
When I started printing face shields, I wanted to use larger (4kg) spools. Since the Prusa MINI spool holder is very good, but the lower rails were too short I modified them (now they are 15mm longer). Here you can get the original STL…
Use supports and glue the horns onto the headband. 50% infill.
This is the prusa lizard (multi-material) but instead of the eyes being a solid color, I added a pupil.
Introduction: Since the big Lego Purge, it was really hard to get any rail design from the internet, until now. Ive constructed any curved standard rail, “almost” in compliance with the L-Gauge standard (…
Tails, a character from Sega's Sonic the Hedgehog series. Tails is a nickname for "Miles Prower", which is a pun on "miles per hour", a reference to the famed speed of Sonic the Hedgehog. Tails is a two-tailed fox, hence the nickname. He…
MOUNT GEN2 UNDER ANY TABLE OR DESK GEN2 Under Table Rails turn the dead space under any desk, table, or shelf into slide-and-lock drawer storage. Screw the rail up once, then slide GEN2 cases in and rearrange your whole setup in seconds…
Want to make your journal a bit cuter? Use these stencils to add style and structure to your journaling.
These bin inserts are for the Akro-Mils small parts organizer to allow storage of a larger variety of small parts without worrying about them working their way under the dividers included with the storage system. Step files included for…
Non-Printed Parts (2x) 2040 Aluminum Extrusion (I used 1000mm) https://www.amazon.com/gp/product/B08BCG1FT9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 (2x) 1/4 - 20 Bolts (1.5 inch) (2x) 1/4 - 20 Nuts (2x) 1/4 - 20 T Nuts…
This Upgrade gives you the Ultimate 3018 CNC Machine - PCB's and Aluminium can now be milled accurately. Build Steps: Remove the old X-axis rods and Z-axis carriage Loosen the vertical X-axis mounts and slide them as far rear as they'll…
I have re-mixed this part to include a hole for the feed wire to the LM2596 in the back of the case, also increased the length of the LM2596 mounting holes as the smallest M3 screws i have where too long, also notched the two nounting…
This tool guides a threading die with the tailstock on a lathe. It consists of a 3D-printed handle with a large knurled section for a good grip and individual, swappable die holders. What you get: 3D files (.f3d, .step, .3mf, .stl) of all…
Here you can find an organizer for Gravitrax rails. They are available in the three common rail lengths. The stackers fit on the original Gravitrax playfield. Happy printing!
License: Free for Personal use only For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails (Instant access to 44+ models) Hey everyone! 🐯🧡✨ I'm so excited to share my newest design with you all — this…
Pochoirs lettres et chiffres : 2 dimensions 70mm et 90mm. Epaisseur : 1.4mm Imprimés en 0,2mm. Possibilité d'adapter aux dimensions voulues avec le slicer (uniquement X et Y) Letters and numbers stencils: 2 sizes 70mm and 90mm. Thickness:…
A cable clip that requires no screws or nails. Put the clip on the cable and then slide it in between the wall and floor molding. Perfect for rentals or when you don't want to leave a mark. Changelog 2021-11-24: Added two variants of the…
A 35mm DIN rail compatible housing to hold a WeMosD1 Mini and a common RS485-to-TTL Adapter. Print instructions Parts 1x 2 Pin KF301 Screw Terminal 1x RS485-to-TTL Adapter 1x WeMos D1 Mini (microUSB Version, ESP8266) 1x 1mm Optic Fiber…
This is my model of the Asgard Bilskirnir Class space ship from Stargate. It is once again assembled together as kit - with no glue needed. Not the best model I have done, but still. I uploaded the files in 7z so that the folder structure…
Snowflake stencils for the perfect christmas view from the window. Use snow in spray can, apply a thin layer, clean the stencil with water or a dry cloth & repeat for many many snowflakes on your window. No need to use paper stencils…
Completely built from scratch based on the original parts, as I had found the ones available don't quite perfectly fitted on my Q. I included the Tray as seperate parts, as well as a full version - you obviously only need one.…
Holder in two versions: single fake nail (prints in under 20 minutes) Up to 5 fake nails I'd recommend using 4 walls, the rest works with standard printer settings. If you print this model, don't forget to post a make :D
Funny pencilholder for your desk! Be different from your boring colleagues :D
I just modded the XY Joiner for the Gantry to fit MGN12H Rails instead of MGN9C. WHY? Cause i don't have 9C Linear Rails in stock :) Just the lower part has to be changed, upper joiners still stock. Print Settings Supports: No Resolution:…
Bring fashion-inspired decor to your space with this stylish Corset Vase ! Designed to resemble a classic lace-up corset, this unique 3D printed vase combines elegance, charm, and modern aesthetic into one eye-catching centerpiece.Perfect…
Víčko plechovky piva Pilsner a Kozel , Radegast, limonáda , Pilsner and Kozel ,Radegast , limonade beer can lid
Based on the Kurama figurine as seen in Boruto (screenshot below), this little nine-tail fox demon is a print in place, with supports. I printed in orange PLA and painted with acrylic paints.
MOUNT GEN2 UNDER ANY TABLE OR DESK GEN2 Under Table Rails turn the dead space under any desk, table, or shelf into slide-and-lock drawer storage. Screw the rail up once, then slide GEN2 cases in and rearrange your whole setup in seconds…
drop in t-slot nuts with printed threads in 1/4 20 and m5 x .08 Print instructions i printed them at 0.1 in pla
