Liczymy pasujące modele…
UPDATE: New rear Betweener! Creality K1 Lid Riser. I didn't really care for any of the other lid risers out there. They were frequently huge and had sharp angles that needed supports, so I set out to design a modular lid riser system. It…
Updates 2023-07-26 - Adjusted z-Height of Betweeners, all level with floor now. 2023-07-20 - Rear Betweener Added! Introducing the JC K1 Lid Riser now with hinges! Keep your lid attached and stop having to find a place for it when you get…
Improved taller enclosure for the FlashForge AD5X. These alternate parts and additional parts increase the overall height by 64mm, this gives proper room and clearance for the PTFE feed tubes, There is also a cowl that installs over the…
The Hybrid Betweener Tired of having to swap betweeners depending on the material you are printing and its ventilation needs? And where do I keep the spare betweeners when they are not in use? This project aims to provide the only…
Same enclosure, I just removed the personal logo inlay from the pieces.
Technical information for all model files : Nozzle size: 0.4 mm, no Input shaper Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: Textured Notes : All…
I generated the STLs that correspond to the different cases: Bottom : WIthout RJ12 port : CYD_Dial_JC2432W328C_bottom_without_RJ12.stl RJ12 on rounded side : CYD_Dial_JC2432W328C_bottom_RJ12_rounded_side.stl RJ12 on squared side :…
Little 3D print to mount an action camera/GoPro to the chin bar of your HJC I90 modular helmet. I designed it so that the helmet stays fully functional, so you can still operate the chin vent, as well as the modular button part. I…
This files are the shape of the DJ control Mix, the DJ control Starlight and the HDP DJ60 Headphone. You can print the controller in two parts by cutting it, his purpose is to help you to customize something around it. Have fun and…
If you're looking at this, you like the Speedbump and the JC hinged Riser and you really wanted to make both work. Now you can. Included is a VERY rough combo of the JC Hinged Riser for the K1 as well as the speedbump. Some minor work…
This is a general purpose low profile wall mount case for the Guition JC3248W535 3.5" display. The front part supports the display using the screws supplied, and clips onto the wall mount bracket. I specifically made this to mount the…
Basic wall mount for the MJJC V2 foam cannon. The design is very basic, so feel free to remix it however you want :)
Didn't like the idea of a big ol' hole in the lid of the K1 so I sealed it up and added a ptfe tube hole at an angle
The clip was broken and I couldn't find anywhere, so I decided to make this mount.
Filament need cca models A ,D…20m, B,C, E, F…10m. Hole diameter 46 (A,B,C) 51 (D,E,F), 43(G,H,I) mm. Size A models cca 120x120x45mm.
After modifying my K1 with the side spool holder and filament sensor bracket from MDFPereira (https://www.printables.com/de/model/507110-creality-k1-side-load-spool-holder-version-2) I also wanted the lid riser assembly from @ Joe Cooper…
JCreateNZ - Commercial License Available --- Keycap switch top and base. Fits over a keycap to fully enclose it - I made this as a base to model fidgets / clickers over. Free for personal use, if you would like a commercial license to…
I used a 3d scanner on my motorcycle helmet and I made a mount for the front for a GoPro, all you need is some permanent 3M tape. Plz lmk if it works or needs adjustment, this is my first model so post pics!
Designs to use with thin (1.2 mm) rubber pad for tighten fixation on the handlebar (ø22,3mm) Print Settings Printer Brand: Prusa Printer: Prusa Steel Rafts: Doesn't Matter Supports: No Resolution: 0.2 Category: Camera
The mount follows exactly the lines of HJC RPHA11 Helmets, and has dedicated clearance to still open and close the air chin intake ! Although it may seem as the angle of the camera would be way too much towards the sky, it as absolutely…
printed 15% infill Pla
Decorative key Best dad, the inscription can be made in a different color, Polish and English version.The key size is an example, good luck.Download, print, you will like it, LIKE.Regards, SCANER.
I bought this inexpensive JJC negative scanning LED light and holders from Aliexpress for scanning film negatives and slides. https://www.aliexpress.com/item/1005005050118182.html Really liked the light which is bright, well diffused and…
Description I had issues with the rear betweener not fitting nicely because of the extruder cable. I made the gap for the cable bigger while also extending the wall on the right side so that it fully slots with both lid risers on both…
A front-facing side spool holder. Don't know about you but I don't have enough room behind any of my desk to be putting a spool.. This faces that spool to the front so you can go as far back as you want. The bowden tube clip holder also…
Action Cam ChinMount For HJC I71 (ORGINALLY MADE BY GREGLGOMEZ). I found it useful and it got deleted so here u go. I dont own this model. All credits to original creator greglgomez! This was the original link:…
I designed these framed betweenners because they looked better and more in keeping with the rest of the structure
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.1 mm (Quality) Infill 15% No support needed Materials recommended: PLA Printer used for prototyping: Prusa XL Type of bed used for prototyping: smooth All…
JCreateNZ --- I bought Bar Keeper's Friend but it didn't come with a lid, so I made one. Should fit both Barkeeper's friend cleanser and cookware cleaner & polish. If your printer is accurate it will snap on for a tight fit and seal (but…
The knobs on my stove broke so I created new ones. The width of the pin it pushes onto was 6mm on my stove, however I have made multiple sizes. Free for personal use, if you would like a commercial license to sell this model please check…
Wall mount your JC8012P4A1C panel in style with this bracket! Avoid cutting into your wall to get that flush mount. Two versions are included: a landscape and a portrait bracket. A small hole is placed at the bottom right of the mount to…
I made a quick remix on Evan's design to work directly with the "JJC Slide and Film Remake" light that can be bought here at Amazon
Action camera helmet mount to fit the HJC RPHA 90S helmet.
Here is my GoPro mount for my HJC RPHA 71 helmet. This is the 7th version I've created, and it's by far the best one yet—quite sleek with excellent adhesion to the helmet. preview : https://youtu.be/MG_Sxr9S8nc (GoPro Hero+)…
You can print it like @emcee_nars recomended, or, like I did, cut the part in two and print it in the position in the photo. The hinges printed in this position are much more strong and you need this. And the speedbump will not have any…
A flexi polar bear! Print in place, provided both 7mm and 13mm thick options.
UPDATE 10.11.2023 Added a new model for other Einhell tools with grabs and integrated supports. Print this file if the tool is NOT the table saw Original description It turned out that JCB batteries fit almost perfectly the EInhell tools.…
BOM: 1S-8S battery indicator 1 “60W” lamp 1 SPST 15x10mm switch 2 6.3 mm wide, long spade connector, I've used angled PCB spade connectors. 2 6x12 mm screws optional if low battery voltage cutoff is needed, I used TL431 low voltage…
No supports needed Infill irrelevant Resolution: 0.15 Printed from PETG Scaled to 105% to compensate shrinking
Dekorativní velikonoční vejce Vajíčka mají ozdobnou prolamovanou strukturu tvořenou kruhy Tisk bez je možný bez podpěr, pouze s límcem, který pokud se neodtraní slouží jako stojánek :) Proto přiloženy dva soubory jeden bez podpor ve…
Technical information for all model files : Nozzle size: 0.4 mm, no Input shaper Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: Textured Notes : All…
Pokémon Card Centering Checker (2024) Ensure your Pokemon cards are properly centered with this simple yet effective centering checker. Designed for French Pokemon cards from 2024, it should work well with most current cards. Just slide…
Můžete sem něco zasadit. Ideální velikonoční dekorace a květináč.
Tisk PLA - MMU vrstva 0.2 výplň 100% Print PLA - MMU layer 0.2 100% infill
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings I recommend to do a color change by script and use a prime pillar
I designed this frame for necessity. Maybe I'm going to improve it, for example with a camera block system. If you have some ideas let me know that. There is also the Autodesk Fusion 360 file if you want to do some adjustment. Let me know…
Jun., 01., 2024 V1.1: Removed protruding parts inside the mask Minor changes to the lettering May, 30., 2024 V1.0: First release Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed…
JCreateNZ - Commercial License Available --- This model is a round tsurikawa! the classic tsurikawa shape. This tsurikawa has a diameter of 10cm and is 1cm thick. Tsurikawas are designed to work with a 1 inch (25mm) nylon strap, 2x M4x10…
Tired of using a flashlight to see your prints? I sure was! Can be printed w/o support. Can print 2 at a time on the K1 if you are careful how you place them. Based on JCs excellent lid riser and hinge! Requires soldering etc… for the…
Chin mount for HJC F70 helmet and gopro fixation
I was looking for an increased printer cover for my K1 and decided on the slotted version from Joe Cooper. After printing the parts with ABS, I noticed a lot of warping on the contact surface of the parts. As a result, the outer edges…
I've created this case model with openings on both sides because I couldn't find batteries for this camera, so I've decided to power it with a power bank. The tolerance is low, and the square hole in the front helps to remove the camera…
Simple replacement screw for a HJC CL16 helmet screw. They are a standard M6 thread but with a large flat head. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.1 Infill: 20 Filament: NA PETG…
Printing with one extruder with filament exchange. / Tisk jedním extruderem s výměnou filamentu.
Remixed SYSDmg design mainly to add space for 2 wires to go in the attended slots of the metal frame. It allows to avoid the printer carriage to catch one of the wire (the main wire, and in my case an USB cable for my Cartographer3D).…
The JC66-03278A is a Samsung gear-lifting cassette component designed for specific Samsung multifunction printers. This part plays a crucial role in ensuring smooth paper handling and consistent performance. It's compatible with models…
Velikonoční vykrajovátko ve tvaru vejce.
!!!!! NOCH IN ERPROBUNG !!!!! STILL IN TEST !!!!! DEUTSCH: Ich habe hier für Motorrad Helme der Marke HJC einen Atemabweiser konstruiert da die dinger immer verlohren gehn. Er sollte in folgende Modelle passen: IS-16, FG-15, FS-11, FS-15,…
JCreateNZ - Commercial License Available This is the model for the top section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts). See the images of the assembled tsurikawa…
I cut the slots to clear drag chain bracket
3D scan of the MJJC V2 Foam Cannon. Use this if you want to design wall mounts etc.
I designed these to replace my original clips after they got damaged. Printed in PETG solid, these are very stout. Nice snap fit onto my 9mm diameter hiking poles. If you need a different diameter, let me know and I'll update the model…
Modelo base para crear monturas para camaras de acción (incluye proyecto FreeCAD con ejemplos). A partir de esto podrás crear diferentes monturas según tus necesidades. Incluye dos modelos, con hueco para tuerca y liso para palomilla, y…
Technical information : There are two files to print the case, depending on the number of nozzle you have. Case printed with one nozzle Nozzle size: 0.4 mm Layer height: 0.32 mm (Speed) Materials used: PLA/PETG Printer used for…
This is a cover for the GUITION JC2432W328C development board. It is a cheap development board that can be programmed with MicroPython, Arduino IDE and ESP-IDF. 3mm screws are required for assembly.
Two days ago i watched a video of the "Impossible Dovetail" on the "Clickspring" channel on YT. For ambitious woodworkers this is a very common project, but Chris machined the parts out of aluminium (aluminum for U.S.) and brass. I really…
Perfectly fitting chinmount for the HJC RPHA90S and RPHA90.
quick mount for gopro camera
Air assist for xtool 20watt non-pro. PLA without supports. A 3d printer nozzle goes on the output side near the laser.
There are two files to print the case, depending on the number of nozzle you have. Case printed with one nozzle Nozzle size: 0.4 mm Layer height: 0.32 mm (Speed) Materials used: PLA/PETG Printer used for prototyping: Prusa XL 2. Case…
JCreateNZ - Commercial License Available This is the model for the top section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts). See the images of the assembled tsurikawa…
JCreateNZ - Commercial License Available This is the model for the top section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and 2x M4x10 screws (and 2x M4 nuts). See the images of the assembled tsurikawa…
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
I could not find a spare bottle cap for my new foam cannon, not by manufacturer or as a 3D print so I made my own. PLA works just fine or print in a material of your choice. You do need a couple of settings though: Walls: 5 Seam position:…
Bumper made to fit ddr jcab pads. more info and picutres to follow in the future. Please let me know if you'd like a part for pump pads or kcab pads, as they're slightly different. PIU might be identical but it's cold in my garage abnd i…
JCreateNZ - Commercial License Available This model is a tool for accurately punching the holes in a tsurikawa strap - for use with my tsurikawa strap locks (see my other designs for the free files). You can make a tsurikawa strap without…
Hundreds of thousands of Johnson Controls (JCI) Metasys VMA-1410 and VMA-1420 Variable Air Volume (VAV) controllers exist across the world. Hardware wise these controllers are very reliable however the common point of failure after about…
I used a led spotlight leftover from another project; 24 volts, 120 degree angle, warm white, 25mm: https://www.aliexpress.us/item/3256803619896206.html?spm=a2g0o.order_list.order_list_main.89.469c1802ZuKBM4&gatewayAdapt=glo2usa4itemAdapt…
English (This translation is computer generated) : The Egg of Columbus is consisting of a flat egg-like shape divided into 9 or 10 pieces by straight cuts. The goal of the puzzle is to rearrange the pieces to form other specific shapes,…
I got a second hand Sena SMH10R headset that was missing the battery clip so I made my own. In this case fitted on an i90 helmet, but it should fit any HJC helmet that is prepared for use with Smart HJC. Keeps the battery for the Sena…
VELIKONOCE - vejce
My first original articulated print-in-place toy! Provided both a 7mm and 13mm thick version. All joints work great print-in-place, I used .3mm layer but should be good with anything .15-.4. This is just a first attempt, more to come!
These are the front K1 risers designed by JC with integrated wire clips to use DerrickDarrell's LED mod.
I've remixed UWU-designs Pegboard backplate for the JCD 8898 Soldering + Heatgun station from Aliexpress, to make it work on Ikea Skadis pegboards The backplate is slighltly wider than the original backplate that came with the station…
JCreateNZ - Commercial License Available This is the model for the bottom section of the tsurikawa strap lock - designed to work with a 1 inch (25mm) nylon strap and snugly fit 2x M4 nuts (used with M4x10 screws). This model is designed…
Action Camera chin mount specifically for the HJC RPHA 71. I have also added the helmet mesh, for anyone who might want to design their own mount. If you want to modify the original file, you can do so on onshape here:…
Vykrajovátko na těsto ve tvaru vejce, velikost 70mm, stěna 1mm
Helmet Visor Screw HJC form Visior
Bruder jcb 5cx boom mount i printed it in abs
Enjoy a pleasant experience with this elevated case for the Hercules DJ Control Mix . Using the DJ controller at a comfortable height enhances convenience. Impress your friends during a mixing session with this functional case featuring a…
🦋 Minimalistický motýl je elegantní dekorace v 2D reliéfním provedení vyrobená technologií 3D tisku. Design tvoří jemná silueta motýla s čistými liniemi a výrazným obrysem, který vynikne zejména v bílé barvě. Decentní a moderní vzhled se…
wanted some slots for the rear Betweener so remixed and added slots
