Liczymy pasujące modele…
You like 🥰 the KID'nR filament spool silica gel boxes, but your spools don't fit as they have a larger inner core diameter? Here it is the KID'nR XL : All the features as the standard model but now for spools from 56mm - 90mm inner core…
This is a larger version of my original compact pillbox. It also has an extra hinge in the middle. It doesn't feel much bigger in the hand, but the capacity of each compartment is also twice as large. For printing instructions, please…
Hogwarts Castle Remix of a great Hogwarts Castle model, to be cleanner, more printable, and bigger. Huge model cleanup with printability in mind (remove inner faces, manually simplify small features like windows, change some rocks to…
Needed a larger version to fit my glasses and this worked well
After seeing Neebick's genius addition of a stand into JordanK's Steamdeck USB-C Charger Cradle, I went about reimplementing my slightly larger tweak to that version. Once again, it is about 3mm taller to make it easier to get all of the…
Other hex bit holders that I have tried were too small for all my miscellaneous bit's widths, so I have made better holders. These models are for hex bit holders which have larger 6.6 mm, 6.7 mm, 6.8 mm, and 6.9 mm hex bit cutouts. I am…
72mm and 73mm openings should fit most larger spools. Most spools with larger openings have a slightly larger diameter on one side, which is why i have 2 sizes loaded into one print. Added a lip to these so that even if the spool opening…
The lid prop angles the top glass creating a “chimney effect” to vent the hot air. With my 50mm versions of the lid spacer, you no longer have to print PLA with the door open. The original design was very narrow and made the glass lid…
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
I love Gridfinity for organising small parts in my home. It does, however, not work for larger items - so I designed a solution that works with Gridfinity and allows me to store larger items and interoperates as one of the four solutions…
I love making armor and mods for the Dummy 13 but have felt that the shoulders could be wider to give it a more “Heroic” physique. I became especially inspired when I realized the hip armor could also go on the shoulder! I extended each…
This is a remix of https://www.printables.com/model/239612-big-bag-clip-with-screw-on-cap , which allows to close larger bags. I have extended the length of the clip by 25mm, to make it easier to close larger bags.
I've seen many different models of card boxes and each one was missing something. I created two boxes from scratch that met all my expectations. The boxes have large enough tolerances so they will not cause any problems in printing. The…
This is a remix of the Lego_man. Holder toilet paper by vvK187. We buy the extra large rolls of Quilted Northern (https://amzn.to/2VBXz7r) and they just would not fit on this. I scaled him to be a little bigger, then I carved out the…
This remix of the model by LoboCNC lengthens the depth and width of the holder (and also the gear) by 0.5in to accommodate tools with larger handle diameters.
When I started printing face shields, I wanted to use larger (4kg) spools. Since the Prusa MINI spool holder is very good, but the lower rails were too short I modified them (now they are 15mm longer). Here you can get the original STL…
I liked the Prusa scraper, just needed a larger hole for hanging it. :-)
I have used another "Bin" in real printing. I found that, if there are lots of color changes, it was too small. So i needed something bigger. I took it and redesigned it to be larger. So if you have an Bambo Lab X1 and you use the AMS,…
Print both files from this model, the rest of the files can be used from the original model. If you have any question, feel free to contact me.
This is the same as Julia Ebert's excellent model and prints in the same way. The only difference is it allows for three compartments per day instead of two. It fits on a standard Prusa print bed but doesn't, unfortunately, fit on the…
Also available with ready-to-go print profile at MakerWorld for your convenience. This is a two-box set that completely fills out the available space between AMS first stage feeders. First, the boxes are lengthened (vertically taller than…
This remix of the Demon Hands Bookmark makes the models larger and stronger. The Claws are 25% larger, and the Bookmark is thicker (1.75mm) and longer (100mm). This makes the bookmark more rigid without affecting the book or the binding,…
This is an update to the corner file to allow a larger hole for larger cables. There are two print file options one for a medium cable and the other for even thicker cables
Printable Mehrunes Razor from The Elder Scrolls Skyrim this is the larger version at 16 inches/406mm.
A simple fuss free headphone stand that is easy to print and looks professional and elegant on a desk setup. This can be printed in vase mode with 0% infill or with 5-10% infill for heavier headphones. This design was initially made for…
This is an insert / organizer for Food Chain Magnate and the more recent, larger dry erase milestone boards from BGG. It has no lid lift, supports premium sleeves on the cards (Gamegenic Prime sleeves shown in the images), supports…
This is a redesign of some tape measure holders for Skadis that I found online, especially inside this great collection: https://www.prusaprinters.org/prints/57792-skadis-tool-mount-collection I've started the model from scratch to fit my…
Alternate latches for the Pop-up Gift Card Box with larger filament holes. The original latch files have 2.2mm holes and are made to be a tight fit with 1.75mm filament. These latches have 2.6mm holes, which will more easily accept 1.75mm…
The originals were awesome, but weren't large enough for the tea bags I have (tazo and other brands) so I scaled accordingly. I used the JD version so I could mount them under the cabinet. I also added a small cutout in the top rear to…
Make sure to check out my updated remix that integrates Neebick's stand! Remix of JordanK's design because I was still having trouble squeezing the cable into the box while still being able to close the lid. Increased the external height…
Mad props to @Br3akfstE4tr for the design and thanks for sharing the f360 file. I remixed this because the eggs my wife gets from her quail are just a bit too big for the original and while I was at it I made it print without supports and…
I made 2 versions V1: Will fit 8 accessory boxes and a few bigger compartments but not adapted for gluestick V2 : Will fit 8 accessory boxes and many small compartments and one adapted for gluesticks I used 6 x M3 25mm screws
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
I took the FPV-Rover V2.0 and made some adjustmants to fit my hardware and my liking. Things I have changed: -inner_frame_left and inner_frame_right: I deleted the venting openings. These pieces are now much sturdier. -motor mount:…
This is a remix of Ethernet Port Dust Cap/Cover - No Supports from kerngebiet with a larger base for easier printing and easier extraction of the cover. The initial design was a bit loose in my ethernet ports, therefore I added a 105%…
The headband, created by NX3CREATIONSLLC, was too small for my head. I am a larger person and needed something bigger. This is a remix that adds 10mm in-between the ear mounts. I have also added some spikes on the lower portion of the…
Larger bases for upcomming addons :-). Print them the same way as the original. (I fixed one minor issue with the outer that overhang that the original design has. The chamfer is 0.2 mm to small there, resulting an in very small 90…
X-Wing Xmas Ornament (remix) I really liked basti30's original decoration but experienced difficulties printing it, the detail failed to print well, and the laser cannons of the x-wing lifted. This version is scaled up by about 30% making…
This is a remix of John_Wet's gyroid which is a remix of jcohen313's gyroid which is a remix of westomopresto's groid on thingiverse. I wanted to print this rally big and thought the large trim at the top looked off to me and would also…
The Base is 6.5 inches in diameter. You print all of the walls twice and assemble them to make the diameters twice as large. This leaves you with a display that is much larger than the original and will fit an extra candle. PLA 10%-15%…
Remix of the Phone Holder by @PlatinumStars at Phone Stand by PlatinumStars | Download free STL model | Printables.com - I rebuilt this from the ground up using slightly different dimensions to be able to fit my friend's iPhone in an…
The original Worx cutting disc size is 145mm, with original blades the full cutting width is 175mm. There are other versions around but mostly for older Landroids. I wanted to create my own and also make some changes to the original…
Update 7/18/2025: You can find the latest version of this design, which includes a desiccant holder at the link below: https://makerworld.com/en/models/1613938-gridfinity-watch-stand-with-desiccant-holder#profileId-1702837 Description…
Original Model: https://makerworld.com/en/models/538757#profileId-455917 Modification: Extended the base and made a hook style to make sure the rear is supported and the front doesn't allow for the laptop to slide off…
With this printed I can safely and securely attach my Sodastream CO2-bottle and the regulator to my Cornelius keg in my kegerator, making sure the bottle doesn't fall over and my beer isn't flat when I want to pour a pint. A remix of the…
Made the main base larger (about 9 ½ in or 240 mm wide) and added two holes at the top for possible bungee connection. Original cup holder and fence hook still fit. Used the original print suggestions, but added a modifier on the bat…
Redesign of Catan player pieces with a lid. Fits with 5e Catan pieces The lid can also be placed on the underside when actively using. But I also added a version with a filled bottom, at which you cannot store the lid, but you don't need…
This is a remix of SHR3D.eu's Clicker with a larger main body so that you can easily hold it and operate it with one hand. The functional clicker part is unchanged. Update: I've uploaded a new version with a solid “clicker activator” (see…
NEW! Video of how I built the circuit and installed the software: UPDATE: I was missing the diffuser file. You could get it from the base model but for convenience I uploaded it here (and converted it to metric) In the cover, I added a…
After reviewing a few comments, it became clear to me that the new jugs not only had a larger diameter screw-on, but the cup was larger too. My wife likes to use the original small cup and I am guilty of not thoroughly investigating the…
Remix of the ‘Larger slide cover’ by RasmusB, which is based on https://www.printables.com/model/411917-logitech-c922-webcam-cover-slide-to by codysechelski Remix differences from RasmusB's version Removed the gap between the body/button…
This is a remix of the Multiboard single plier holder, scaled up to accommodate larger tools like wire strippers.
I had an 8lb jug of desiccant and while I really liked the original functionally, it was just too small and would have required printing too many copies. So Instead I took the original and added 100mm to the height, then added horizontal…
Created entirely from scratch with inspiration from https://www.printables.com/model/412974-simple-mason-jar-candy-machine-updated-with-printa/comments/800004 since I wanted to use peanut m&ms with it and it wasn't large enough to…
88x88 mm Shelf: Needed a larger shelf to hold a few photography light modifiers. Made this thicker, larger, and stronger then the original shelves.
I really liked https://www.printables.com/model/302028-brother-p-touch-tze-label-tape-gridfinity-storage- by serialx for storing my TZE Tapes. I really liked that it fits any size tape. I just had two small issues with it. 1) I like…
IKEA SKÅDIS holder for 35mm paint bottles, such as: Vallejo Primers / Varnishes (60ml) Vallejo Metal Color / Mixing bottles (35ml) Liquitex Inks For slightly smaller bottles, such as: Vallejo Pigments AK Interactive Pigments / Weathering…
It uses 608 zz 8x22x7 bearings. Print on PETG or some material witch can handle heat. 4 walls 4 bottom 4 top 15% infill Little support on back side stand. Brim of 10mm for the Shaft and about 6mm for bottom Spacers. I printed in Garolite…
Due to my inability to find a much larger shelf than the ones available for download on the original HSW page, I made one by myself. This shelf is much wider, and deeper, and consists of 2 pieces that have a small tolerancy and should…
I needed to hold larger sized paper so I made this bigger. That's all. Thanks to the original creator of the file! Print Settings Printer: Anycubic Kobra Rafts: No Supports: No Resolution: .03 Infill: 20 Filament: TPoimin PETG Clear…
Brackets for building a DIY shelf out of a 1x10 or similar shelf board. Designed for X1C print bed (256mm * 256mm). *please note the slicer modifiers to make the bracket/screw part much strong I wanted a shelf that could specifically hold…
Larger. Stronger. Easier to get stuff out of
I needed to remix the compact pill box ( https://www.printables.com/model/619766-compact-weekly-pill-box-easy-to-read ) for my mother-in-law, so decided to remix the larger pill box for myself. This printed really well in PLA for me. To…
Refer to the original post for further model details.
I printed Greg's Heart Shaped Jewelry Bowl for my wife and she really liked it. When I suggested it was kind of small for what she needed, she agreed. I considered scaling the model up to make it larger, but I didn't want to impact the…
May 2026: Added a larger V2 so we could keep more pens handy at the fridge. This necessitated using larger magnets so I switched to these roughly 3mm thick items . The model has room for 12 magnets but in my case 8 was more than enough.…
Based off of the updated back cover with fan. Increased fan size from 20x20x6 to 25x25x7 and added more vent holes. uses M2.5x9 button head or maybe m2.5x8 flathead screw. i made mine from ASA. Will make from a higher temp material when I…
Skadis compatible panel. Dimensions: 240 mm Wide x 120 mm High x 5 mm Thick. Other panel sizes available at https://www.printables.com/@HighDesertHacker/collections/2757420 Key features: Panels can be joined together to create a larger…
Here comes the longer version of the Original Ultimate Ice Scraper from Genghis . This one is around 30cm in length, for vehicles with larger windshields. I printed this with 4 walls. No supports needed when printed upside down. Watch out…
Remix of dMosher's design “ Larger Console Tray for Honda Pilot or Ridgeline ”, with minor improvements. This should be compatible with the following vehicles that use “Base Tray” part number 83407-TG7-A01 or 83407-TG7-A02: 2016-2022…
Multiboard hammer mounts (regular size and mallet size). Use tree support from the build plate. Reccomend using 3 walls. Also recommend using a multipoint bolt and the heavy duty (hooked) snap.
No supports needed. Model in picture printed on Prusa MINI with PLA.
After seeing the Lucky 13 articulated figure by soozafone I knew the amount of articulation could be used for a lot of variations, and this was one of the ones I immediately started working on. I replicated the head and split it into a…
Larger spacers for the Joseph Joseph rolling pin . The largest it came with was only 3/8" (10mm). I recently needed one that was 1/2" (13mm) and designed my own. Also included larger ones for 3/4" (19mm) and 1" (25mm). Here is the source…
More than just a remix, I made both of these models from scratch but they are based heavily on kilthro's and IrgendSoEinPaul's works. Both models have widths equivalent to hanging two smaller containers side-by-side. I used 0.2mm layer…
Print in place cable organizer
At the time of the Behringer X32 release, the iPhone 3 was the main iPhone and the 4 was just about to be released. The phone holder on the X32 was designed to fit these older phones, but now 13 years later, the holder is no longer able…
Updated version of the Nintendo 3DS stand by gilianmartins. This version has a larger front lip, because my New 3DS XL with a case on it kept sliding off the original one.
The original models posted by @PrusaGuy are optimized to work with Prusament spools, however other spools are not guaranteed to be compatible. My modified models allow PrintedSolid Jessie, Push Plastic, and Atomic spools to function in…
A self gripping nail holder, which helps to keep your thumb & fingers safe from those stray hammer blows we periodically make. These are also great at holding some of the very small little nails which are virtually impossible to grip with…
An optical illusion with multiple arches. The one on the far right appears larger than the one on the left, but all are the same size, which you can prove by stacking them on top of each other. Print 3 of the same model.…
☕ The original Nespresso Vertuo Pop drip tray was too small in diameter and too high to fit my Starbucks “You are here” mugs meaning we had to use it with the drip tray removed and that left drips on the kitchen countertop, or we had to…
Larger shelf 4 for Honeycomb storage wall The shelf is extended 1 cm towards the front.
[EDIT 13.5.2024] added new model for even larger lenses and fingers. 3d printed Handgrip for Smallrig CCS2310 2310 cage. Tested with Sony a6400, may work with 6100 and 6300, but I haven't tested. Won't fit a6500. This is V2 version of…
The most recently purchased jugs of all® detergent have a larger diameter screw-on cap. My guess is they are standardizing with the rest of the industry as the new cap is the same size as OxiClean™ and several other bottles of various…
Used M8 20mm Button Head Socket Screws Print Settings: Polylite Black PLA .2mm layer height 15% Cubic infill 3 walls Supports enabled 5 Top and bottom layers Printed on Bambu P1S
This is a adapted version of Thingiverse “Model Lego man cap (fitted)” from anynoob , to fit for Fun King 3D's Lego MiniFigure Toilet Paper Holder For Larger Rolls . I added custom supports in the *.3mf file. Version 1.0 - 24. Mar. 2023 /…
Whenever I build something using an ESP32 or Diguno I want to make it clean. There's never enough space in the case to do that. Everyone focuses on making it as small as possible and feeding in ugly wires from the outside. I've…
Models These models are for the G502 Proteus Spectrum (model from 2017). There are many revisions of the G502 mouse that are very similar in design, so there's no guarantee that this model will be compatible with your G502 mouse.…
A more substantial grip for the Sony DSC-RX100 camera. Tested only on Mk2 and Mk1. Print instructions Category: Camera Summary A more substantial grip for the Sony DSC-RX100 camera. Tested only on Mk2 and Mk1. Print Settings Printer…
This is an AT-AT plant pot that is made for bigger plants. This is a remix off of Rick269's file. I changed the plant compartment to have a larger space with one segment instead of one so that it could fit larger plants. I made it in…
I printed these in clear PETG with two walls and 20% gyroid infill. They feel good and glow well!
I liked the idea of the original MK8 nozzle holder, but I had purchased larger packs with more sizes than offered, so I remixed it to hold more size, and even more .4 nozzles. UPDATE 2/25/21: Added "Hardened Steel Nozzles", "Stainless…
This is a larger bumper to replace the original one. The standard bumper is not enough protective for my 6 years old boy's driving skills so I designed this one. Head on collision (front impact) is absorbed either: by the bumper ("use…
Update 2025-09-11: Added adapters for the Mosquito MK1. You will need supports for the MK1 adapters. See screenshot for details. Update 2025-06-10: Changed the tolerances for the latch cutouts since it was too tight for some users, added…
With this ratchet strap winder you can quickly wind up your straps. I've found other quite similar models, but I needed a model that was abit larger and that still is quite quick to print. This can support straps with a diameter of about…
It annoyed me that I could not fit my water bottle into the cupholder on my honda element. I opted to make a new one. This replaces the existing center console cupholder. As it is deeper, you must assemble it in place. I printed…
I love the Industrial phone stand model that @josh3D created. I wanted to use it on my phone, but the phone was too large. So I increased the width of the base and also extended the back up 20mm. While I was at it I created a Voronoi…
Bambulab ABL Widget V2 : Bambulab ABL Widget is a simple accessory that let you easily see Z axis movements up to less than 100µm. You can easily see how much Z axis is moving : when print head is shaking when print head is homing when…
No supports needed. Printed on i3 mk3s+ in Prusament Galaxy Purple @ 0.2 mm layer height.
![Larger Qidi Plus 4 Lid Spacer [Updated Size and Shape]](https://media.printables.com/media/prints/1053720/images/8192105_e4d6d9ae-eb33-4d51-a963-1ef8a95607aa_4493d5d3-f08e-4035-abf2-1d4f4315463e/20241122_163022.jpg)
