Liczymy pasujące modele…
This holder is clamped onto the sun visor of the car, or onto your shower cabin door. It reliably holds a pair of glasses without interfering. So the sunglasses are easily at hand when you need them. Easy to print with standard…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
Edit 24/11/2022 I've printed the model in ASA now so it should have a better resistance to heat. However, winter as come and the temperatures are not enough to properly test it. Do not print in PLA Works best for thick sunglasses (6mm…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a Squintsworth Glasses Holder. It works well with any glasses or sunglasses. Looks great on a desk or night stand. Recommended print settings layer height: 0.2 mm infill: 10% gyroid perimeters: 3 supports: no Prepared files…
Wydruk około 6,57 €–8,03 € nettoWstępna wycena jednego wariantu
Introducing my latest 3D model: a clip that attaches your sunglasses to your car's sunvisor, keeping them within easy reach. This easy-to-print accessory is designed for quick assembly and installation, adding a touch of convenience to…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A model of funny glasses for celebrating the arrival of the new year 2025. Printing: Print takes about 1h47min on MK4 and I reccomend to use color-change during print, e.g. first 7 layers with one color and rest with black color. But of…
Wydruk około 1,41 €–1,73 € nettoWstępna wycena jednego wariantu
Inspired by an old set of tokens I had found on this site. https://www.thingiverse.com/thing:2591952 Made in the same syle as my other tokens and using the JoCat icons for the classes. Easy to print tokens for when you can't find just the…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
This is a Lady Beatrice Squintsworth Glasses Holder. It works well with any glasses or sunglasses. Looks great on a desk or night stand. Recommended print settings layer height: 0.2 mm infill: 10% gyroid perimeters: 3 supports: no…
Wydruk około 6,74 €–8,24 € nettoWstępna wycena jednego wariantu
HAPPY BIRTHDAY glasses with funny bobbling letters. Fits on Prusa MINI (see the last picture). If you want “MERRY CHRISTMAS” glasses you can find it here https://www.printables.com/model/669553-bobble-merry-christmas-glasses. Short…
Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu
Easy to print Glasses, no support is needed. For the hinge use a bit of filament, if you have the 1.85mm one. Else print the pin and use that. The glare should fit snug in the cutout of the glasses. for best result, press the glare in…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Print, fold and enjoy :-)
Wydruk około 1,47 €–1,79 € nettoWstępna wycena jednego wariantu
I designed this to replace the clip in my car that started to fall apart. This design is split into 3 components: Locking Sunglasses Holder Sun Visor Clip (3 optional sizes). I recommend not using PLA as it will likely warp in on a warm…
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
I don't want to have to fold my glasses and struggle putting them in the right groove so they don't fall over. This bud wears them proudly, just throw them on him and voilà. Most glasses sizes fit, but the little guy wears +2.0 lenses for…
Wydruk około 14,07 €–17,19 € nettoWstępna wycena jednego wariantu
After printing, heat the arms with a heat gun or a hair dryer and bend them to fit your head. Two Part Version The initial design (the one part one) did hold up for a month or two, but it did brake after some time at the mounting point to…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Overview: Looking for a tough, practical way to carry and protect your eyewear? This remix of the Flexi Glasses Case is now part of my RangeVault series—designed for Everyday Carry (EDC) durability and convenience. Whether you’re on the…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Basic wall mounted sunglasses holder. Needs x2 screws for wall. Lay the arch model down on the side. I have been meaning to upload this for about a year; the one I originally printed is still going strong. I printed with standard…
Wydruk około 3,18 €–3,89 € nettoWstępna wycena jednego wariantu
A holder or stand for eyeglasses with a big nose and mustache. One-piece version requires supports under the mustache and nose (for my set up at least). Two-piece allows the stand to lay on its back (excluding the base part) so that…
Wydruk około 5,20 €–6,36 € nettoWstępna wycena jednego wariantu
Car glasses holder for credit card slots in my VW ID.4
Wydruk około 1,73 €–2,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a glasses case with print-in-place hinge. It keeps your glasses secure even when open. The example images show “oversized” reading glasses from amazon. The inner length is 148mm. The hinge friction will keep the lid closed, but…
Wydruk około 5,71 €–6,98 € nettoWstępna wycena jednego wariantu
This is the ultimate laptop holders organization kit. This will help you organize all necessary accessories for your laptop. Your desk will look extra clean. Kit includes : AirPods Holder with optional camera cover Single camera cover…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Dies ist ein Remix von "Interior for a Märklin H0 coach wagon" von jvdwaa. Die Bänke wurden zusammengeführt und schmaler gemacht. Dadurch bleibt auf einer Seite ein Gang frei und die Bänke sind leicht einzusetzen. This is a remix of…
Wydruk około 4,00 €–4,88 € nettoWstępna wycena jednego wariantu
Glasses that you can bring to spice up any New Year's party. Note I only have a model for the left side arm, mirror it in the slicer to create the right side arm. I usually print the arms standing up on the top edge using a small amount…
Wydruk około 2,27 €–2,77 € nettoWstępna wycena jednego wariantu
German below. Easy and quick to print! This is my idea of a beautiful, small, stable, light and resource-saving glasses stand. The main idea is not new, but I haven't seen such a glasses stand with a structured surface yet. The surface…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I lost my last replacement nose piece for my Swissflex Eyephorics 2.5 Glasses. You know, the ones Jaime Hyneman wore on Mythbusters. Here is a good-fitting, comfortable replacement that I designed and printed on my Prusa i3 MK3S+ in…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
This is a model for Shutter Shades. I like to print these and give them out at events. Note there is only one model for the arm. You will need to duplicate it and mirror it in the slicer for the second arm. The Arms can be printed on the…
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
UPDATE Added a V2 - a complete remodel but only in the shorter length for now My daughter came home yesterday and had broken the arm of her glasses at school. She wears Tomato Brand glasses, and these things are meant to be tough but…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
This is my "hello world" program for SCAD. There are already multiple reading glass cases on line but I wanted a single piece that protects the glasses taking up the smallest possible space. The included STL file prints a case that will…
Wydruk około 2,97 €–3,63 € nettoWstępna wycena jednego wariantu
This 1x1 Gridfinity module holds a pair of glasses. This is also a taller version for wider glasses . The glasses are balanced over the center of gravity so it doesn't fall over. It was designed using a coil to produce a helical path that…
Wydruk około 2,05 €–2,51 € nettoWstępna wycena jednego wariantu
If you are planning going on the hiking trip or just going to the city print this mount for your Sunglasses, glasses or protective glasses that you can attach on your backpack or molle strap so it is easy for you to reach. The model has…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Info: extended lens plugin to be inserted into these party glasses recommending more angled temples because this model weights something, so you need to carry it more safely. lenses are: interchangable you can print your own pattern using…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
This is a printable in place case for eyeglasses. First you need to print the test to select correct gap for your printer.
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Requires some support.
Wydruk około 3,13 €–3,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 1x1 Gridfinity module holds a wider pair of glasses. The stand is taller than its shorter version (shown in the second photo). The glasses are balanced over the center of gravity so it doesn't fall over. It was designed using a coil…
Wydruk około 2,24 €–2,74 € nettoWstępna wycena jednego wariantu
Hello, Today I have for you a Keg for pouring drinks into 4 glasses . It is the highlight of every party! Automatically divides drinks into 4 glasses. Absolutely amazing! Interesting appearance. For proper functionality, you need to use a…
Wydruk około 2,53 €–3,09 € nettoWstępna wycena jednego wariantu
Be the talk of the party this Super Bowl with these KC novelty glasses Can be printed monocolor but best done multicolor with 2 standout colors and clear or white for interconnects. The KC modifier look super great in Silk/Metallic Gold…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
TAMIYA - stack container for 6 color glasses (6x 23ml glasses) compatible with: TAMIYA - stack container for 2x 250ml Lacquer Thinner von stefancham | Kostenloses STL-Modell herunterladen | Printables.com
Wydruk około 3,82 €–4,67 € nettoWstępna wycena jednego wariantu
Ever wondered what to do with Google Cardboard VR Glasses you may have lying around? Look no further. With this print, you can turn the fresnel lenses that you find in Cardboards into an eye loupe. The model is designed for one 25 mm…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
Add a touch of attitude to your style with this amazing Rocker Skull with Glasses Charm ! Perfect for personalizing your Crocs, backpacks, or any accessory with holes, this charm is ideal for those who love rock, punk style, or simply…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
160mm wide, 218 mm deep, 80 mm high The spots for the 5 glasses are 40mm deep. The walls are 3mm thick. There is place for 5 sunglasses. Printed ist with silk pla. 0.4 Nozzle, 210/60 Degrees 245g Filament, 10.5h
Wydruk około 12,51 €–15,29 € nettoWstępna wycena jednego wariantu
Its a bigger Version of my ohter creation
Wydruk około 19,15 €–23,40 € nettoWstępna wycena jednego wariantu
Some of the lids were brocken, so I made a new one
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
EN: Are you also tired of shelves stained with honey dripping down the glass? If so, then you are my target group. The plate can be used for two glasses with an outer diameter of max. 100 mm and can also be printed on small printers such…
Wydruk około 3,33 €–4,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
editable label - right click on the text and edit the text . étiquette modifiable - faites un clic droit sur le texte et modifiez le texte. infill 5 % no support
Wydruk około 16,08 €–19,65 € nettoWstępna wycena jednego wariantu
Case for glasses that uses 3D flexible structure. This model is printed flat and then folded into its final shape. Introducing video: Printing: There are small user support blocks under the side wall radiuses and it is intended to be…
3D Printable Party Glasses Key Features: Shutter-Style Lenses: The horizontal slits allow for partial visibility while maintaining the bold design. Easy to Print: No supports, just 20g of filament needed, printed in less than an hour.…
If you like this check out my Vernier & Pen Desk Organiser and Watch Stand that goes with this. Vernier & Pen Desk Organiser by SD-3D | Download free STL model | Printables.com Watch Stand by SD-3D | Download free STL model |…
print in place, no supports, easy to print
I always break my glasses by falling on the ground or sitting on them... I was tired of buying a new pair of glasses every time, so I decided to 3d print them. Easy task, but first I had to draw them. So I reused the lenses, but…
Glasses frames with snap-fit temples for easy swapping of frame components or lenses. I use these as backup frames, but I may find a line of lenses for the frames for a future update. Source files are provided if you want to try to adjust…
Use 4 walls + PETG. A simple clip designed for holding sunglasses or prescription glasses on a car sun visor. The clip attaches to the visor and keeps glasses easily accessible while driving, helping reduce clutter and prevent glasses…
Some day before a trip my original prescription glasses frame broke, so I had to use 3D printing to save myself from being close to being blind during the trip. A quick outline in a sketch, a couple of Fusion 360 tricks, and we have a 3D…
Print with supports on build plate. Insert temples in holes.
Bring personality to your desk or shelf with this collection of 3D printed bust-style sunglasses holders — each one inspired by a different iconic character or figure. Perfect for organizing your glasses in a fun and creative way while…
Inspired by a great game about a bad goose Remixed from: Goose by Maggiman2001 Print instructions Both the neck and beak require supports. I printed both flat side down. I used Inland PLA+ white, Paramount Matte Black and McLarren Orange…
This is a scan of my hand holding glasses. The socket deliberately is a bit out of centre so that eye glasses placed between thumb and index finger won't push the center of gravity out of the sculpture's footprint. Printing I printed the…
Thank you SV3D for the model. I split the part to make it faster and easier to print. I printed it in matte black PLA and PETG on a textured, powder-coated print sheet. The parts fit perfectly for me, but if they are a little loose, just…
Needed a larger version to fit my glasses and this worked well
The clip attaches securely to your vehicle's sun visor , providing a convenient storage location for your glasses without taking up extra space in the car. Its compact design keeps your sunglasses accessible while helping to prevent…
Simple sunglasses holder for sunvisor in car, printed with The Filament HT-PLA to prevent deformation in the sun.
Introducing my latest 3D model: a clip that attaches your sunglasses to your car's sunvisor, keeping them within easy reach. This easy-to-print accessory is designed for quick assembly and installation, adding a touch of convenience to…
With this model you can easil print your own name tag and attach it to your glass or mug. Ideal for any party or wedding. No more mixing up drinks. Ideal for seating arrangement. Customizing Nametag If you haven’t Fusion360 you can open…
Basic glasses stand that can hold up to three pairs. There are two version: one for narrow glasses that can fold and occupy little space (as the pictures ones); the other for larger frames so that the majority of models can fit. There's…
Gnome (supportless) Glasses Holder If you like it --> press like it :-) I remixed the awesome model Gnome ( Supportless ) which was designed by BODY3D . I made the beard wider and added a cutout for the glasses, but also you can find the…
Rugged Glasses Box The box is printed Print-in-place The locks are printed separately and click onto the top of the box. The dimensions of the box are in the picture, measure your glasses first. If it is small, scale all parts equally in…
Print with PLA or PETG without support. I printed Z=0,3 started with white color and changed to green on Z=1,1 Use double side glue to fix it on the wall.
A remix of the (sun)glasses holder by @masimplo_77234 for the Ikea Skadis pegboard using the awesome T-Clip system by @LineArcLine . Printed with PLA, 0.2. No supports needed. I printed the t-clips with 4 perimeters and 20% infill for…
Sunglasses holder for Tesla Model 3 or Y. Print in PETG so it can withstand high temperatures inside a car.
Fix with glue the two case parts Then insert the scroll blind as in the GIF
A model of funny glasses for celebrating the arrival of the new year 2024. Printing: Print takes a little over 2 hours and I reccomend to use color-change during print, e.g. first 3 layers with one color and rest with black color. But of…
Gnome Glasses Holder If you like it --> press like it :-) I remixed the awesome model Gnome Vase Mode Ready which was designed by NorbertCierpicki . Now the gnome can hold your glasses! Would be happy to see your makes.
This is an updated version of my original minimalist Glasses Stand. I wanted a design that was complex and bold while still being a practical model that could be used every day. The gyriod structure is mesmerising to look at and is also…
A remix to integrate TotallyAddicted 's very cool Skull Eyeglass and Change Holder with a connector for Mike 's excellent Slotty Modular Storage System . Additional credit to Mocodroid whose model provided the lower jaw
Ho creato questo porta occhiali per poter fare fotografie espositive, per esporre gli occhiali in vetrina o semplicemente per riporli a fine giornata, senza rischiare di graffiarli o rovinarli. Durata stampa 54 minuti; Altezza Layer 0.3…
wall holder: https://www.printables.com/model/1293915-sunglasses-wall-holder-for-4-glasses
This is a special set of (glassless) glasses, intended to be used for training your eyes' ciliary muscles (these are the muscles that focus your eyes on different object distances) to avoid or even heal visual defects (lifestyle diseases)…
Print in purple or your favourite colour. There are 2 sizes of arm, 100mm and 125mm. 100mm seems to fit the young'ns I made these for and 125mm is about the same size as an adult pair of glasses but you can of course scale these to other…
I created this model, and its variants, for the " Eyeglass Holders " contest hosted here on Printables. I had in mind a simple shape where I started from a rounded-top prism and worked from there. I've then proceed to add a channel to…
They're a celebrated image in the world of memes
IMPORTANT, PRINT THE FIRST LAYER VERY SLOW SO THAT THE HEXAGONS SLEEVE WELL. Gafas de sol con los hexagonos tipicos del relleno “honeycomb” caracteristicos de Prusa. Estas gafas estan hechas para el concurso kit cards y las sujeciones al…
My son needed glasses for his Harry Potter costume, so I re-designed these to fit his head. The hinges use 3mm bolts, at least 18mm long, to hold them together, and they can fold when not in use.
These are two color Harry Potter glasses. The scar is done as an inlay. There is a text document discussing how this is done. This is a remix of the one by Makerlabarautomation. My design allows for two color printing without dual…
3D model of party glasses for celebrating the arrival of the new year 2026. Printing: Print takes about 1h12min on CORE One and I recommend to use color-change during print, e.g. first 7 layers with one color and rest with black color.…
This remix is supposed to be used with the absolutely fantastic design Honeycomb Storage Wall by RostaP Since I am using their design as a place to store my EDC and other bits and bobs, I came up with this simple design in order to store…
Suppose your favorite glasses are broken. Usually this is frame, temple or - most likely - the hinge. But the lenses are OK. But hey - we have our 3d-printer and enjoy 3d design and printing. Let's design and print our glasses using the…
Glasses case. No supports. Glue four little magnet under edges for better close. Print instructions Unassociated tags: glasses accesory Category: Glasses Summary Glasses case. No supports. Glue four little magnet under edges for better…
Store up to 3 sunglasses with style with this module. I've also included a 4x1 version that holds just 1 pair. Magnet cutouts have a diameter of 6.1mm and a depth of 2mm; good to friction fit 6x2 magnets. This module is part of my Vide…
Skull glasses holder and change/pocket bowl for your night stand. Used Prusament Pearl White PLA 0.2mm layer height MK4 with input shaping enabled Paint on supports / organic supports / For support enforcers only 10% grid infill (painted…
Printed some glasses for the kids. Print the glasses with the front flat on the bed. The legs with the sides flat on the bed. Use a needle/small screw to push into the holes. Print instructions Category: Glasses
Description I created these 3 boxes to house my glasses and sunglasses when camping, hiking, biking, sleeping & car trips. As you can see, there are many uses, and I use them every day. There are also a lots of other uses besides holding…
"If you frequently break your glasses frames like me, then these Ray-Ban RB 8903-5262 frames are perfect for you. You can see in the pictures the comparison between the original frames and the 3D-printed ones. If you're interested in…
0.2 layer height, print it in a flat orientation with top of the frame down on the bed
Just some cool sunglasses for Lucky 13 and Mini 13. UPDATE: The Lucky13 version no longer needs to be scaled down to 95%. I've updated the model to the correct size to provide a snug fit. Added a Mini13 version.
This is a replacement frame for Rayban Aviator lenses (in case your original frame has been damaged). Filament (1.75mm) is used as pin for the hinge. You can use hot water or a heat gun (with caution) if you cannot insert the lenses. The…
Travel Glasses Case with Carabiner/Lanyard Hole This fully printable case is designed to protect your glasses or sunglasses when you're on-the-go to the beach, pool, or wherever else you may be going! It comes in three sizes to fit…
Safety Glasses clip for wherever you need to keep them handy. Remix of https://www.thingiverse.com/thing:2954156
This is NOT a remix of an amazing Jasoncanning case: https://www.thingiverse.com/thing:2578431 since I did not use any original files just the picture as reference. This is complete rework with slight changes. The case is printed in place…
Print with PLA 0.2mm QUALITY Infill 15% Bed Temperature 70 for without printer enclosure No support needed Printing orientation please check with gcode file
Layer height 0.2. Infill 25%. No support.
