P
PrintablesDDRBoxman
Olimex ESP32 POE ISO Case
Case for the Olimex ESP32 POE ISO Remixed from https://www.thingiverse.com/thing:4860626 by Bram Gerritsen
- Pobrania
- 809
- Polubienia
- 42
- Ocena
- 4,67
Wyniki wyszukiwania: limex
Liczymy pasujące modele…
P
PrintablesRob Latour
Olimex ESP32 POE ISO project box
Designed for project described here: https://hackaday.io/project/166985-wol-with-google-homealexa-ifttt-esp32-poe-iso note: this is for an older version of the ESP32 POE ISO board (Revision B) and it does not fit the current version which…
- Pobrania
- 241
- Polubienia
- 10
- Ocena
- 0
P
Printablescreepe95
Olimex ESP32-POE-ISO Din Mount
Board is not screwed in, i dont have the right screw at the moment. Holder for ESP32-POE-ISO at DIN rail. Testet with: Olimex ESP32-POE-ISO rev.L, maybe more will fit Holes for ruthex M2 inserts
- Pobrania
- 186
- Polubienia
- 7
- Ocena
- 5
P
Printablesmch
Olimex ESP32 POE case with CC2530 as router
Why don't use Olimex ESP32 in ESPHome bluetooth proxy for Home Assistant also as a router? In one case? Grab your spare CC2530, flash router firmware, print the case and connect Vcc and GND to Oli ESP32 PoE board. Insert into case not…
- Pobrania
- 131
- Polubienia
- 9
- Ocena
- 0
P
Printablesexperify3d
Olimex Neo 6502 MMU box
A perfect box for your NEO 6502. Print and have fun. !Note: 3mf files are saved with bambu slicer profile and are MMU ready. They won't work in Prusa slicer. For Prusa slicer please use the provided STL files instead. Link to the git hub…
- Pobrania
- 84
- Polubienia
- 6
- Ocena
- 3
P
Printablesexperify3d
Olimex ESP32 C6 EVB
Simple case, all ports exposed, there are LED hole inserts for transparent filament. Print and have fun.
- Pobrania
- 78
- Polubienia
- 6
- Ocena
- 0
P
Printablesexperify3d
Olimex ESP32 FabGL
3mf file with settings for bambu lab printer Project: https://olimex.wordpress.com/tag/fabgl/ FabGL board: https://www.olimex.com/Products/Retro-Computers/ESP32-SBC-FabGL/open-source-hardware Buy case from here:…
- Pobrania
- 63
- Polubienia
- 7
- Ocena
- 0
P
Printablesned14
Superior Olimex ESP32-POE case (mini)
With all respect to everybody else who has supplied cases for the Olimex ESP32-POE on here, I don't like any of them, sorry! So I ended up making my own set of cases: The mini case, this one, measuring 100 mm long, 35 mm wide and 35 mm…
- Pobrania
- 53
- Polubienia
- 4
- Ocena
- 0
P
Printablesexperify3d
3D printed enclosure for the RVPC — an open-source / open-hardware project developed by Olimex
The enclosure is designed for mechanical compatibility and easy assembly with the RVPC board, providing protection and rigidity . It features a black matte textured finish , 3D printed in PLA .
- Pobrania
- 52
- Polubienia
- 3
- Ocena
- 0
P
Printablessoosp
Olimex ESP32-GATEWAY housing
Housing for Olimex ESP32-GATEWAY with Ethernet, microSD and USB cut-outs. Several variants are available: - with or without cut-out for cables to the GPIO pins - with or without OSHW logo - with or without screw holes One box requires to…
- Pobrania
- 47
- Polubienia
- 0
- Ocena
- 5
P
PrintablesCoat
Case for the USB-NeoHub by Olimex
Nice simple case for the USB-NeoHub by Olimex. There are versions with and without a logo. The two parts are a pretty tight fit and is probably a good friction-fit (depends on your settings and printer) but you can screw it together with…
- Pobrania
- 33
- Polubienia
- 0
- Ocena
- 0
P
PrintablesThomas
Walimex videolight mount
Introduction The original mount on this Walimex videolight for scuba diving broke. It's also made from plastics and had threaded M3 holes for attachment. The threads wore out and the lamp was almost lost on a dive. :-( This replacement…
- Pobrania
- 31
- Polubienia
- 1
- Ocena
- 0
P
Printablesexperify3d
Box for Olimex ESP32-POE2
Github project page: OLIMEX/ESP32-POE2: Power Over Ethernet Internet of Things POE IoT board with Espressif ESP32 WiFi, Bluetooth and wired 100Mbit Ethehernet with 25W power delivery Product page: ESP32-POE2 - Open Source Hardware Board…
- Pobrania
- 29
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDerLukas
Olimex ESP32 ArtNet Node Housing
This Housing fits a Olimex ESP32-POE and four GX12 connectors. I use it as an ArtNet Node for WS2812B LEDs with WLED. Screws are 3,0x10.
- Pobrania
- 29
- Polubienia
- 1
- Ocena
- 0
P
Printablesned14
Superior Olimex ESP32-POE case (midi)
With all respect to everybody else who has supplied cases for the Olimex ESP32-POE on here, I don't like any of them, sorry! So I ended up making my own set of cases: The mini case , measuring 100 mm long, 35 mm wide and 35 mm tall, which…
- Pobrania
- 29
- Polubienia
- 2
- Ocena
- 5
P
PrintablesGizmo Goody
Parametric Olimex ESP32-POE-ISO-EA AV Rack Mount 1U
Motivation I wanted to securely mount my Olimex ESP32-POE-ISO-EA and its WiFi/Bluetooth antenna to my Strong FS AV Rack so I could use it as an ESPHome Bluetooth Proxy for the Home Assistant SVS Subwoofer Integration . Solution Design and…
- Pobrania
- 27
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMarkoMck
Olimex ESP32 POE Relay Housing
A case for my boiler controller using a Olimex ESP32 POE module, a relay module and a DS18B20 for local temperature meas
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
PrintablesdaSäP
Olimex ESP32-POE2 DIN-Rail mount
Adapter to mount Olimex ESP32-POE2 on a DIN rail. A set of two is needed per Board. Print on the side, support should not be needed. Material and infill density doesn't realy matter. I printed with PLA, but PETG might have better…
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
PrintableseWuPi
Panel eink 4.2" Esp Olimex Poe
Panel na biurko w wyświetlaczem eink 4,2" Waveshare 1422, sterowany i zasilany przez moduł ETH POE Olimex , przyciski w stopce, działające na naciśnięcie panelu. ------- Desk panel with a 4.2" Waveshare 1422 display, controlled and…
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
P
Printablesexperify3d
Box for Olimex ESP32-GATEWAY
Print in matt black PLA for best quality. Find more about the open source project here: ESP32-GATEWAY/README.md at master · OLIMEX/ESP32-GATEWAY You can buy the box from here: BOX-ESP32-GATEWAY-F and support the development of more open…
- Pobrania
- 23
- Polubienia
- 0
- Ocena
- 0
P
Printablesned14
Superior Olimex ESP32-POE case (maxi)
With all respect to everybody else who has supplied cases for the Olimex ESP32-POE on here, I don't like any of them, sorry! So I ended up making my own set of cases: The mini case , measuring 100 mm long, 35 mm wide and 35 mm tall, which…
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSvensson2584
Case for OLIMEX TMS320-XDS100
Hi, this is a commissioned model for my workmates from our electronics testing department. A nice case for their JTAG programmer pcb (OLIMEX TMS320-XDS100 v3+ JTAG Programmer). It is a two part case for use with 8x M3 inserts. The input…
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMrKrueger
Limebox Remix (Olimex Olinuxino Lime A10)
An enclosure for the Olimex A10-Olinuxino-Lime single board computer. Remixed from one that was posted on Thingiverse 10 years ago and it still has a “work in progress” status. I've added holes for M3x4x4.2 inserts in the case and created…
- Pobrania
- 20
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJermyn
Olimex ESP32 PoE EA Rev L w/ DHT22
Case changed to fit the Rev L of the Olimex ESP32 PoE EA with additional extension to fit a DHT22
- Pobrania
- 19
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTobyLorenz
Top Hat Rail mount for Olimex BOX-LIME
This is a mounting plate to place Olimex OLinuXino-LIME BOX to standard 35mm top hat rail. Both orientations are available: alongside and cross
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
Printablesenergeticinterpretation44
Joint Piece for Tripod "Walimex WT-3131 Basic-Stativ"
Replacement part for the joint on my "Walimex WT-3131 Basic-Stativ" tripod. Designed in Onshape: https://cad.onshape.com/documents/56650c33d9ff2bc4b6eadadb/w/25c530232c5c8e16d42c6b2e/e/d91081d30246aae3d34dd405 Like the model? Consider…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCepadyes
Olimex GateMateA1-EVB Case
I needed a case for the Olimex Gatemate FPGA dev board that protected the connectors while still allowing for wires to be plugged-in. There are no holes to access any selector or jumper since I never change them, but buttons are still…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
Printablesquill_g
SlimeX-FDM BMI270 case remix
Go check out Yasu3D's Slime-X FDM GitHub page I personally think the SlimeX-FDM case is the best looking design for DIY trackers without a custom PCB, however I was left unsatisfied with the original case design. This remix fixes a few…
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesdiesesQ
Walimex / Elgato Multi Mount Flex Kit
I use a Walimex Wall Mount for my Elgato Keylight Air + top camera. I've always struggled to fit the camera cleanly & had several weird looking setups around it. Since getting a 3D Printer and learning CAD, i came up with this. It is…
- Pobrania
- 12
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPrinzpaulaner
Walimex pro StabyPod M 80cm spare part
Spare part for Walimex pro StabyPod M 80cm for the coupling between the two rods. Maybe try to print it in another orientation than in the file because of the forces that act on the layers.
- Pobrania
- 10
- Polubienia
- 3
- Ocena
- 0
P
PrintablesCabbitCastle
Walimex Pro WT-806 Light Stand Locking Lever
Tips are appreciated and go towards creating new designs I was using my Walimex Pro WT-806 Light Stand when the height locking lever broke for no discernible reason, despite being made from what looks like cast iron or maybe sintered…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
Printables0x3D
Olimex ESP32-PoE Case for SHT40 temperature sensor
Two scres (M2x5 or M2x6) can be used to fix the PCB in the enclosure (still got a couple blank PCBs left, contact me if you want one)
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
Printablesrkearsley
Olimex ESP32-POE-ISO-EA (Clip shut case)
Clip-shut case for Olimex ESP32-POE-ISO-EA. No screws or glue required. Clips hold tight but it can be re-opened with fingers or a small flat tool I printed with PETG, 0.2 layer height, 2 perimeters, gyroid infill, support for the…
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
Printablesexperify3d
Olimex RP2350PC Case
Use black matte PLA for best effect finish.
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
Printablesexperify3d
Box for Olimex MSP430-JTAG-TINY-V2 programmer
Print in this orientation: Product page: MSP430-JTAG-TINY-V2
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTVHS
Olimex A20 board housing styled after Wilson Hall
This is a housing for the A20 single board computer / Dev board from Olimex. It's styled after the Wilson hall building at the Tevatron facility. For best effect (I.E. resemblance to the original building) it's best to print everything…
- Pobrania
- 5
- Polubienia
- 2
- Ocena
- 0
P
Printablesexperify3d
Box for Olimex ARM-USB-OCD-HL
Plastic box. Requires one self tapping screw for fixation. Print in any material. Link to product: ARM-USB-OCD-H Link to github repository project: OpenOCD/tcl/interface/ftdi/olimex-arm-usb-ocd-h.cfg at master · arduino/OpenOCD
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
Printablesuwearzt
Olimex ESP32-P4 baseplate
For a FreeCAD model see: https://codeberg.org/uwearzt/freecad/src/branch/main/lab/gridfinity/olimex_esp32_p4.FCStd
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
Printables
Olimex ESP32 POE ISO Case (rev K)
Case for the Olimex ESP32 POE ISO rev K Remixed from https://www.printables.com/model/264188-olimex-esp32-poe-iso-case
P
Printables
Olimex GateMateA1-EVB Case
I needed a case for the Olimex Gatemate FPGA dev board that protected the connectors while still allowing for wires to be plugged-in. There are no holes to access any selector or jumper since I never change them, but buttons are still…
P
Printables
Olimex XDS100v3 snap-fit Case
Original model: OLIMEX XDS100V3 Case - by: x3on I've made some changes which i found helpful, see the differences to the original model.
P
Printables
Parametric Olimex ESP32-POE-ISO-EA AV Rack Mount 1U
Motivation I wanted to securely mount my Olimex ESP32-POE-ISO-EA and its WiFi/Bluetooth antenna to my Strong FS AV Rack so I could use it as an ESPHome Bluetooth Proxy for the Home Assistant SVS Subwoofer Integration . Solution Design and…
P
Printables
Case for the USB-NeoHub by Olimex
Nice simple case for the USB-NeoHub by Olimex. There are versions with and without a logo. The two parts are a pretty tight fit and is probably a good friction-fit (depends on your settings and printer) but you can screw it together with…
P
Printables
Case for Olimex USB 1.1, 2.0, 3.0 to 10/100/1000Mbit converter
Case for the open source project https://www.olimex.com/Products/USB-Modules/USB-GIGABIT/open-source-hardware
P
Printables
Olimex ESP32 POE ISO Case (rev K)
Case for the Olimex ESP32 POE ISO rev K Remixed from https://www.printables.com/model/264188-olimex-esp32-poe-iso-case
P
Printables
Olimex ESP32-POE-ISO flat base mount
I have printed it in PETG, and for the L revision of ESP32-POE-ISO-IND-EA it worked 100 % accurately.
P
Printables
Solar Filter Walimex 800mm
Solar filter for the Walimex 800mm f/8.0, including a protective box. The film is very thin. Made with Baader AstroSolar Safety Film 5.0 solar film. Buy me a coffee, if you want :)
P
Printables
Olimex ESP32-POE-ISO-F box
BOX-ESP32-POE-ISO-F has two fixing lugs which allow 3 mm screws to fix the box to a flat surface. Suitable for ESP32-POE-ISO, ESP32-POE-ISO-16MB, ESP32-POE-ISO-16MB-IND, and ESP32-POE-ISO-IND. Print in PLA Black Matt for best results. 3…
P
Printables
Olimex USB-ISO Box
Print with settings: 3 walls 4 top and bottom layers 0.2 layer height PLA black matte Product page: https://www.olimex.com/Products/USB-Modules/Isolators/USB-ISO/ Can I use USB-ISO for removing the ground loops between my computer and my…
P
Printables
Box for Olimex MOD-WIFI-ESP8266
Print on the bottom end of the case like on the image. Github page: https://github.com/OLIMEX/ESP8266 Product page: https://www.olimex.com/Products/IoT/ESP8266/MOD-WIFI-ESP8266/open-source-hardware
P
Printables
Olimex Tray for @Robert_28442's 19" Modular 1U Rack
I blended the blank tray in the original package developed by @Robert_28442 and the ESP32 case developed by Zapdo (which is listed on the official ESP Home website. Aside from blending, I expanded the hole in the case to allow the Olimex…
P
Printables
Olimex XDS100v3 snap-fit Case
Original model: OLIMEX XDS100V3 Case - by: x3on I've made some changes which i found helpful, see the differences to the original model.
P
Printables
Olimex ESP32-POE-AE-F
STL contains both parts - split to objects before print. 3MF adds the pattern modifier.
P
Printables
Olimex ESP32-POE-ISO-AE-F
STL file contains both bottom and top box. Pattern is build in to the box.
P
Printables
OLIMEX ESP32-EVB DIN Rail adapter
[EN] This holder has been made to install my BSB-LAN adapter based on OLIMEX ESP32-EVB board inside my gas heater Brötje. But it can be used for any IoT project based on OLIMEX ESP32-EVB (tested with hardware variant K - PCB size 75x75mm)…
P
Printables
Walimex Pro Hook
Hakenmodell um an einem Walimex Pro Lampenstativ etwas an der Spitze aufzuhängen. Hook model for hanging something at the top of a Walimex Pro light stand.
P
Printables
Case for Olimex uext hub
Simple case for uext split board. Print it with any kind of material, without support, put board inside and glue parts together. I think it didn't required screws or something like this - so I made it for gluing. Board have minor vertical…