Liczymy pasujące modele…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Lukisegler 2.0 an RC electric glider with brushless drive Attention! Since this is a large project with many files, I will add more instructions here in the near future! Instructions for the fuselage are included in PDF format. The first…
Hello. I have recreated the sign for Luke's diner from the 2000 show Gilmore Girls. The files come with both sides of the sign that hangs outside the diner. Six 10x2mm magnets required for each sign (12 in total), pause mid way through to…
Swappable thermal wing for the Lukisegler rc-glider This wing is designed for the Lukisegler rc-glider ( https://www.printables.com/de/model/927540-lukisegler-20-electrical-rc-glider ) to give it better thermal gliding properties. You can…
Lukisegler update (english): Servoplate for 9g Servos Servoplate for 9g servos (standard-mini-servos). Lukisegler update (deutsch): Servoplate für 9g Servos Servoplatte für 9g Servos (Standard-Mini-Servos).
Luke Skywalker on Ahch-To Netsuke. I think I went a little bit beyond old and grumpy - to just Frumpy. Ahh.. I may move his face around in the future. For now I kind of like the Frumpy. + this has me thinking of doing a few Peter Dinklage…
Luke Ornament als Weihnachtsbaumschmuck. Die Schrift ist die Star Wars Jedi Schrift von DaFont. Ca. 10cm hoch. No supports needed/keine Supports nötig.
A box for fluke accessories. It is wall mounted because it holds a lot of weight when fully loaded. Screw size is #8, which is what comes with wall anchors from home depot. One side holds two boxes of fuses. The other side holds two…
Update October 22 2022 - Added a whole version of the grip for anyone who wanted it. Here is my Luke Skywalker lightsaber featuring a slide-open control box to reveal the internal circuitry as featured in a deleted scene from Return of…
The case is based on my parameterizable " Rugged Box ". Inner dimensions: 130 x 185 x 65 mm (Bottom height: 50 mm) Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a…
The iconic lightsaber used throughout the Star Wars film series. Photos show the prop after filling, sanding, and painting. The files contain versions from A New Hope, Empire Strikes Back, and Rise of Skywalker. We made a video covering…
Lukisegler-NG XS Span: approx. 900 mm Body length: approx. 500 mm Take-off weight (LW-PLA): approx. 100 g Controls: elevator / aileron Center of gravity: 7 mm behind the profile nose (next to the fuselage) Rudder deflections: aileron…
Made possible by my amazing Patreon supporters! If you like my work and want more models and pre-supported files for resin you can support me in Patreon This model needs supports to the chin. Luke Skywalker, a Force-sensitive human male,…
CArts Lukisegler !! Attention !! There is an updated version of the fuselage of the Lukisegler: https://www.printables.com/de/model/927540-lukisegler-20-electrical-rc-glider CArts Lukisegler (english) Span: approx. 1700 mm Body length:…
Had a chance to make some tweaks and gave him a base. Not perfect, but should be more accurate than the previous one. Faces are tricky to get right, but it's a lot of fun to try. Best printed upright with supports under nose/chin/back.…
Loved the original pool noodle handle by Cosmeeto but wanted to add some variety to it for my kiddos and their friends. May the force be with you. See the Sith Model Here
This version of the rugged box was re-sized and re-shaped to fit a Fluke 117, 115 or 114 and the TL175 TwistGuard test leads. It has additional storage for items like a spare battery, spare fuse or the AC175 alligator clip set. It's a…
It's a Print-In-Place model, without the need for any support material. It also takes advantage of the material properties, meaning that there are no external parts or hardware, it's just the material that allows it to flex and store…
Hello! This is the Mega-Assembly we've all been waiting for, and the only question is - can you go To The Moon!?!?! This sequential discovery mechanical puzzle box will challenge teens to adults. Can you get to the meteorite vault? Can…
🌅🌅 May the 4th be with you! At MiniWorld3D we celebrate Star Wars Day of May 4th with a model inspired by Luke's iconic home at the Lars moisture farm in Tatooine. To be hidden from the Emperor and Darth Vader, Obi-Wan Kenobi took baby…
Requires only 6x M3 x 30 mm bolts for assembly, with no additional hardware needed. May also fit Fluke 89, 187, and 189, but compatibility has not been tested.
I wanted a compact box to keep my Fluke 107 together with the test leads in an organised way. I’ve remixed @Whitty’s rugged box a bit to accomodate the fluke meter whilst having a roughly similar footprint to the other compact tool cases…
Turns out one fan isn't enough if you want to have perfect prints on your Ender 3 or any of the Ender 3 derivatives. So I began search for dual fan hotend enclosure and came across this one . As some things in original model were adjusted…
All REMIXED parts end with _R. See this YouTube video to for more detail on the improvements: Thank you for all the feedback, it's allowed us to make this puzzle box extra robust and much much more fun! All the feedback has lead to…
DISCLAIMER: This lightsaber was modeled based on photos with no scale, so all measurements were guesses. Actual size may differ from props used in films. This is a simplistic lightsaber model based on photos of props used by Mark Hamill…
Star Wars: The Rise of Skywalker Custom lithophane stand included. Software used: Machine Learning (various GitHub based systems/scripts), Photoshop, Blender, Meshmixer and S3D. Dimensions: 172mm x 142mm x 6mm. Print settings and…
This is a set of pieces that can be used to recreate a Luke Skywalker figure at 500% scale. This figure was released in 2016 and was included in 8 sets between 2016 - 2022. All of the stl files needed to create this have been included in…
Gridfinity holder for a Fluke 115. 2x2 grid space required, about 45mm (1 3/4") high. Printed in PETG, standard PrusaSlicer settings for Prusa PETG. Would suggest adding a hook&loop to your Fluke probe wires to tie them together for…
Inspired by similar models on here, I made a holder that fits a Fluke 117 specifically. I imagine it would work with other similarly sized Fluke multi-meters (or maybe other brands that have a hook on the back too.) A separate probe…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
you will find a instruction as pdf by "other files"
Description Everyone knows Luke's lightsaber from Return of the Jedi. Disney sells them (I have one). But for those with a keen eye for details will know that the lightsaber Luke uses in most of ROTJ does not match what we get in the…
Here's Luke Skywalker's lightsaber from Return of the Jedi! Be sure to print two of the triangular indicator pieces, those are very small prints, I would suggest printing them at the same time as some of the larger pieces to let them cool…
I know there are variations out there, but I made my own as a fun project to continue my 3D modeling education. I made this to be printed in parts and I used 3 color filaments, but would be better printed in 5 colors (I didn't have green…
A Gridfinity-compatible (2x5) bin for probes that come with the latest models of Fluke digital multimeters
All REMIXED parts end with _R. See this YouTube video to for more detail on the improvements: https://www.youtube.com/watch?v=v4uSPPAtK\_g Thank you for all the feedback, it's allowed us to make this puzzle box extra robust and much much…
A nice and sturdy HSW mount for modern Fluke MultiMeters. Tested to fit both the Fluke 15B and 17B range of meters, but others like the Fluke 101, 106 and 107 should also fit.
Every Piece has been REMIXED based on your FEEDBACK from 100s of 3D PRINTER ENTHUSIASTS!!!!!! See this YouTube video to for more detail on the improvements: https://www.youtube.com/watch?v=qoUnkRJTB\_c Thank you for all the feedback, it's…
Lukisegler XXS 3d-printed free-flight glider. Printed in LW-PLA. Reinforcement for the fuselage and main spar printed in regular PLA. Wingspan: 400mm Length: 260mm Weight: 18g Additional parts: 1x M3 x 20 screw 5-6x M3 nut 4x M4 nut.…
Tlumič hluku přepadu pro mořská i sladkovodní akvária. Model je navržen pro maximálně jednoduchý tisk bez podpěr. Montáž je rychlá a intuitivní – stačí složit a nasadit na přepadovou trubku. Ověřeno dlouholetým provozem. Hlavní výhody:…
Lukisegler update (english) Update of the wing-parts 10 (l/r) and 12 (l/r) from version 2 (v02) to version 3 (v03). The perforation for the servo-cables are now included in the printed part. It is no longer necessary to cut the holes by…
The final print might require a bit of trimming to fit. But works just fine. Compatible with Fluke: 333 334 335 336 337
The Lukisegler 3.0 – Improved Fuselage Concept The Lukisegler version 3.0 is based on an improved fuselage construction concept. The 3D-printed parts are made from LW-PLA and printed with infill for a lightweight yet durable structure. It…
Remix of the Olukelo gimbal that has threaded arm with mounting space for a 6pin din connector like this: https://eu.mouser.com/ProductDetail/Kycon/KMDPLX-8S-100?qs=56XnaFOCjrofk105TmWYHg%3D%3D gimbal carier and frame have mounting holes…
This is a remix of the stellar model by fixumdude inspired by the X-34 Landerspeeder Luke pilots in Episode IV. Added a few cutouts on the top panel of the speeder to allow for easier coloring. Printed and sliced on Bambuslicer using a…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Hello! I have an updated version of this model that you can find here The second lightsaber used by legendary Jedi knight Luke Skywalker in Star Wars: Episode VI Return of the Jedi. This model is separated by color and doesn't need any…
Detailní sci‑fi miniatura inspirovaná Lukem Skywalkerem ze světa Star Wars. Postava v černém jediovském oděvu, se zelenou energetickou čepelí a odhodlaným výrazem, zachycuje ikonickou atmosféru galaktické ságy. Model je ideální pro…
With this design I tried to make an accurate replica of the Luke Skywalker Lightsaber from the Return of the Jedi (Hero Version). Easy to assemble! No Glue necessary! :) Just screw all the parts together in the right order. If printed at…
Lukisegler-NG XS e, Update to brushless electric drive Wingspan: approx. 900 mm Fuselage length: approx. 500 mm Take-off weight (LW-PLA): approx. 120 g Controls: elevator / aileron / motor Center of gravity: 8 mm behind the profile nose…
Replacement stand for Fluke multimeters, improved version, original by: https://www.thingiverse.com/make:958810 Printing parameters: Resolution: 0.2mm Perimeters: Default Infill: 15% works fine, increase as needed for more durability…
Hey Everyone, This is my test for a new printer, new filament, or even new slicer settings. I use this all the time, and I figure if it helps me, maybe it will help you too. This is a nice hands-on way to see if you'll have success when…
This is a set of blocks that can be used to recreate the Endor moon Forest and Luke Skywalker minifig from set 7128 at 500% scale. This is our second post from this set. The first post containing the Scout Trooper and Speeder Bike can be…
The Puzzle has been REMIXED! Thank you for all the feedback, it's allowed us to make this puzzle box extra robust and much much more fun! All the feedback has lead to MASSIVE improvements! Stronger, No more wear, less breaking, smoother,…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Thanks to QED_Maestro for his brilliant idea Print as oriented Supports: no Infil 25% Filament: PLA If you download/enjoyed this file, please leave a like Thanks
Replica of Luke Skywalker's Lightsaber Featured in Star Wars: Episode VI Return of the Jedi. It is not an exact onscreen replica, but it was fun to make and great for cosplay or for fun.
Found these at https://facepunch.com/showthread.php?t=1304034&page=6 Also found AnyCad converter with the click of a button turned them straight into .OBJ and .STL's http://www.anycad.net/the-free-3d-model-converter-anycad-exchange3d.html…
Update 5/29/2025 I made a slight tweak to the model that reduced the floor of surrounding area around the tool. I lowered it to save on material, reduce overall print time, and make it easier to get it out of the bin. I've kept the…
Replacement clip for Fluke digital multimeters. It snaps into the back of the case, allowing the meter to be strapped or hung during use. This hanger is shorter than the original accessory but provides the same functionality. Its design…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Fluke holder to put in the back of your Fluke multimeter to be able to connect a rope, wristband or whatever. I've added a small belt with magnet attached to it so I can stick my meter with the magnet on something made of iron (door post,…
The second lightsaber used by legendary Jedi knight Luke Skywalker in Star Wars: Episode VI Return of the Jedi. This model is separated by color and doesn't need any supports or glue, all the parts screw together and are compatible with…
This is a wall mount to hold the Fluke 287 DMM (may work with the 289 since they are supposedly the same size, but I don't have the 289 to test it). It includes holders for the TL71 probes and probe tips that come with the 287. I mount…
XY Size Compensation on the Inner Piece at -0.4mm
Made this back in high school on Solidworks. Over the years I have seemed to have lost the actually stl and Solidpart files which makes me really sad not gonna lie but I still have the gcode and thought I might share it with those Star…
I printed it and it works with PLA. I don't know about other materials. All models are in thier correct orientation, do not change this. (They are fine just as they are.) Do not use supports unless noted. I have included 3 files for the…
Ersatz-Halterung für Dachluke (Wohnmobil / Caravan / Boot) Mit TinkerCad habe ich einen schnellen Ersatz für die spröden und gebrochenen Halter meiner Dachluke konstruiert und in ABS gedruckt – so konnte der Urlaub gerettet werden. Der…
The model by @nicklargent was good. but i wanted a place for the leads. So I added them.
Here is the Model a What If…? Luke Bear Luke Bear would be a good Friend of Barry, but Old Ben REALY should have shown him how to handle a lightsaber before handing him a lethal Weapon. 😶 In an alternate universe his thumb got too close…
Youtube Video for Metric 15-Piece Allen Key Set: I've reinvented the ALLEN KEY TOOL! Finally Printable orientation - every other allen key sits on an edge when laid on it's side. NOT ANYMORE! This is sits on an side! Not an edge! Minor…
A mount that utilizes the grips on the back of most Fluke multimeters
This mount has been designed using a 3D scan of the Fluke 101 Multimeter. I initially designed it neglecting to consider print orientation, so the print will require supports. Print this in whatever material you like. I used polymaker ASA…
Design is remixed from an existing model on Thingiverse. Uses the universal hook system from another set of models on Thingiverse. Fluke 179 meter and probe holder (side mount) https://www.thingiverse.com/thing:2908239 IKEA SKADIS…
A 3x5 Gridfinity bin for your Fluke 117 and 113! Theres a V1 on Thangs but V2 has a much better Fit This was designed specifically for the 117, but can also fit the 113
Carrying case for first gen Fluke 87. Room for test leads accessories in the bottom. The parts where the handle is secured has to be glued in place and the bottom compartments also needs to be glued in place. The top is secured with eight…
Created to fit Fluke TP175 test leads, 11mm diameter
Another awesome model created over at the 3D warehouse https://3dwarehouse.sketchup.com/model.html?id=723f13f70b2132413c5a70503dac4f1d Cheers Jace
Description This is my take on Luke's ROTJ Hero saber. It is based off schematics found online that were created from a molding of the original prop. This includes small details like the 2mm and 3mm rings on the ‘grenade grip’. And now an…
Designed for printing in ABS @250C through a 0.4mm nozzle at 0.2mm layer height. Print with button face on print bed. Supports will be required for some areas, and finishing may be required on the retaining flanges due to the print angle…
I needed a wall mount for my fluke 115. I did the infill at 15% but I would likely recommend a bit more.
Before you go further! This project is for personal use only. Any commercial use is forbidden Follow me on Instagram to keep up with latest designs Check out this project's Instagram - @StawiamKlocki.pl Read FAQ Follow MOC designer on…
Nose section reinforcement (optional) For engines with high power / high torque, I designed a reinforcement for the nose area. It is glued in with epoxy resin. It is primarily intended for LW-PLA fuselages. Print this in PETG. Verstärkung…
1:1 Scale Design of Luke's Lightsaber from Return of the Jedi If you want to paint it, I suggest using files 1-4, file 5 is for all in one go Use no supports for File 3 (Top Hilt-Grip), Normal Supports for Files 1 and 2 (Top/Bottom…
A friend was in need of a Cookie Cutter of Luke's Diner for a Gilmore Girls themed birthday party. I designed one using Photoshop & Tnkercad and printed it out for them. Print Settings Printer Brand: XYZprinting Printer: da Vinci mini w…
gilmore girls lukes dinerdddddd
¡Bienvenidos a España! 🇪🇸 Welcome to Spain! This is a recreation of the bell tower or belfry of the church of St Luke the Evangelist in Cheste, Valencia, eastern Spain. It was built in the XVIII century in the baroque and rococo styles,…
Remix of the Fluke 17B+ wall hanger to hang it on to a nail or screw. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: Yes Resolution: 200 Infill: 50 Filament: Sunlu PETG black Category: Tool Holders & Boxes
Created by slicing the original case bottom in fusion 360 and adding 12mm to the overall height, then recombining.
A file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model, but…
A Gridfinity-compatible (2x4) bin that can secure a Fluke 101 digital multimeter.
Combined 2 emitter models into one. Emitter is by timmy_3d and emitter tip is by UnimatrixRed. I added UnimatrixRed's emitter tip to timmy_3d's emitter and splitted it into parts for easier printing. You need also to print new neck remix…
The "speeder-FDM.stl" model can be scaled to the desired size and then divided into objects. Each part can then be printed with fewer supports and a better result. There is a gap of 0.2 mm on all sides between the parts that fit together.…
I originally did this design in 2014: Now I know why Vader was so angry. He saw his electric bill. I made this as a reminder that following in Vader's footsteps is not only fun, but can save you some cash as well. Switch to Vader to go to…
I'm fully embracing the pegboard as the optimum back wall of my micro workshop and am busily designing adapters for the various tools and supplies I want to have at hand. The multimeter is one of those tools, and I wanted a way to keep…
Check the related Fluke 117 model for a nice probe mount.
A versatile IKEA SKÅDIS mount for Fluke 170 series multimeters, featuring a modular design for both multimeter and test leads storage. For mounting hooks use Skadis_Universal_Hook.stl from here: https://www.thingiverse.com/thing:2853257…
