Liczymy pasujące modele…
Another Bolt Sizes! Updated to fix hex socket size. More chamfer on the bolt tip, easier to clean up threads Added washer Added sets Clearer file names Feel free to send me a message if you have any special requests. Updates New double…
With the help of the Fusion360-file of the version2 (with mounting hole) of the Y-Splitter remake of Brandon Raineri, I have adapted a version with M10y1mm PushFits, since the recommended McMaster-Carr part is hard to get in Europe. I use…
This silencer has been tested succesfully at 7.5 Joule of kinetic energy using 4.5 mm pellets. *please test with caution and always wear safety glasses when shooting *not suitable for pellets larger than 4.5 mm / 0.177 *test with caution…
This piece was made to hold a PTFE tube right above the printing head of an Ender 3 V3 SE/KE
Collection of screws (ISO 4017 / DIN 933) including : M10x 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 80, 90 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…
This is a very old design. Please look at my other moderators for a current design This moderator is for air gun use only! Do not attempt to mount it to any other type of gun! Follow you local laws regarding moderators! This moderator has…
I designed this M10x1.0 PTFE Tube Connector for a ø4mm PTFE tube to be able to fit the @suit1337 *Filament Guide Arm M10x1.0-version because the ones I found the hex was to big and obstructed/preventing the connectors to reach the threads…
Filament Halter für PTFE Schlauch mit M10x1 Gewinde (MMU2S geeignet) Version 1: nur Halter Version 2: mit Filament-Reiniger Halterung Filament PTFE Holder with M10x1 thread (MMU2S suitable) Version 1: only holder Version 2: with Filament…
Collection of screws (ISO 4762 / DIN 912) including : M10x 12, 16, 20, 25, 30, 35, 40, 45, 50, 55, 60 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
This nozzle is meant to thread into the bottom of the transmission oil pan on VW 6spd automatic transmissions. (My car is 2010 VW Golf 2.5 Auto. I was doing a fluid flush on the transmission in my garage and didnt realize I needed a…
Filament/PTFE tube guide for Ratrig V-Minion and other 3d printer with 8mm nut. Pushfitting M10x1 - 4
shift knob features ralliart logo on the bottom. I lost the original sleeve. so I made a replacement. Uploaded two type of screw fittings. loose one and tight one. If you choose the tight one . You might need to use Hairdryer to loosen…
Print these in black PETG with 5 perimeters. For the logo and shift pattern plates, do a color change after the 2nd layer. The holes will need to be tapped afterwards. There are intentional voids within the part, but they force perimeters…
Collection of set screws (ISO 4028 / DIN 916) including : M10x 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit…
Shifter Knob with M10x1.5 thread and a hole for a 12mm rod, ideal for SRT gearbox Size of the ball is 45mm (1.750in), thread is modeled in the part. It should be a little tight when you thread it but you get a ‘’lock fit'' this way No…
This isn't a new idea, but I couldn't find an updated Bowden passthrough model for the latest MK3S+ MMU2S raised filament sensor so I took the original and made my own. This also includes an updated adapter that goes below the fs-cover. I…
after downloading lots of nuts and bolts in "ISO Metric profile" and not finding any that fits after print I decided to make my own set from scratch and her is the result for 10mm (M10x1.5 ISO Metric profile) / 15mm spanner
Collection of screws (ISO 10642 / DIN 7991) including : M10x 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher…
Collection of screws (ISO 10642 / DIN 7991) including : M14x 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher…
my 3rd design of a shift knob. due to difficulties on fusion as i'm still learning i rendered it as an OBJ file instead of the common STL file.
Modified @SANAIR_255075 y-splitter remix for pushfit connectors so that it can be attached to printer using 8x5 magnet (8mm dia 5mm thickness) instead of using M3 screw. onshape source:…
Filament guide adapter for a 30° angle for dry boxes, suitable for pneumatic quick adapters 4 mm (M10x1 & 1/8-28). This adapter is ideal for dry boxes, e.g. Ikea Samla etc., to ensure the correct angle outlet to the printers and to…
This is just another filament port for a drybox, with this one being for PC4-M10x1.0 fittings. It uses a compression fitting to retain a piece of PTFE tubing that "hangs in the breeze" to guide the filament into the coupling off the…
Replacements for lost or broken bass drum spur feet and nuts. Modeled from scratch using a set from a Pearl Export bass drum. Fits: Pearl Export-style bass drum spurs with M10x1.5 threads. Files: Bass Spur Foot.stl : spur foot Bass Spur…
he first shift knob I designed for use in my Toyota MR2 roadster. This has been adapted to sit lower and for fitment with Older Hondas using a M10x1.5 thread This design was used as a tester for a carbon fibre variant now being used in my…
Fully 3D printed airgun moderator/silencer designed for a Diana Chaser, but fits other M10x1 threaded air guns. The end cap can be easily removed by finger friction, in case it gets too tight the included wrench makes it easy to remove.…
Used Azure PETG and 0.1 detail with 100% infill and 10 layers, no support, no brim…nothing worked like a charme in the first try :-)
Das ist eine DIN genormte M10x1.5 Schraube mit Schaft (k=6,4mm, L=45mm, Lg=19mm, SW=16, E=17,8mm). Gedruckt mit PLA 1.75mm 205 Grad bed 60 Grad. 20% Infill. Lüfter beim Gewinde an lassen.
These are NOT easy to connect, but it is necessary to have a friction fit once it is connected.
Adapter for Julas "Anslut" lamp holder. The internal bottom thread is M10x1. Small hold is there to secure the cable clamp at the end of the lamp holder - models does not include the thread, but it is possible to thread it with a standard…
Fixed Cylindrical Handle - Impugnatura fissa cilindrica M10x1.5 Metric thread Rev.2 Type Fixed non-turning handle Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx
Modified to allow both two different pushfits (e.g. I have 10x1 for 4mm and ½" 18TPI for 6mm PTFE tubes). 4mm PTFE tube comes from AMS and 6mm PTFE tube comes from dry box. If you want to use both 4mm PTFE tubes you can use original part…
Added cone to the top of the threaded section to enable printing without need for supports. I have printed this out in TPU and it does fit my own car. There are 2 lengths here. The make shown is of the 95mm version. Make image is a 2007…
This is a replacement for the nut on top of desk lamps common in Europe. It uses a metric M10x1.0 thread for the shank of the switch. After 30+ years of use, these nuts are commonly worn down on otherwise completely functional desk lamps.…
Thanks to stockholmviews I added an M10x1 connection thread with a 4.1 mm through hole. The clamping pieces have a 0.3 mm thick adhesive disk. The PTFE hose connector holds surprisingly rock solidly. The usual compressed air couplings are…
An extremely simple shift knob, 100mm tall and 40mm diameter. I used painted on fuzzy skin on the main cylinder and left the tapered areas smooth. Might require a little downward force when screwing on to get it started I printed mine in…
Modified right-side handle that accepts PTFE bowden tubes using a PC4-M10x1 fitting for use with external filament dryers/storage. I modeled the M10x1 thread into the hole so that fitting screws in directly.I also included the model files…
This is for the Mazda Bongo, but will fit anything M10x1.25 The Mazda has to have a removable boot - this will fit the existing retaining ring if you replace the knob with an 8 ball or whatever :)
This mount is designed to attach a Beeline Moto II using the original Beeline Moto Mount Adapter . The holder was specifically designed for my Husqvarna Vitpilen 401 . It screws directly into the left factory mirror mount on the…
M10 Gewindehülse + passende Mutter – eigene Konstruktion Dieses zweiteilige Set besteht aus einer M10 Gewindehülse und der dazugehörigen Mutter. Beide Teile sind vollständig meine eigene Konstruktion und wurden in Autodesk Fusion 360…
Generic star-shaped fixed handle for industrial use. Compatible with conveyor systems, lateral guides, and packaging equipment. Internal thread: M10x1.5 Outer diameter: Ø44.50mm Hub diameter: Ø20.00mm Total height: 22.70mm Thread depth:…
Fully 3D printed airgun moderator/silencer designed for a Diana Chaser, but fits other M10x1 threaded air guns. The end cap can be easily removed by finger friction, in case it gets too tight the included wrench makes it easy to remove.…
This mount is designed to attach a Beeline Moto II using the original Beeline Moto Mount Adapter . The holder was specifically designed for my Husqvarna Vitpilen 401 . It screws directly into the left factory mirror mount on the…
Collection of screws (ISO 10642 / DIN 7991) including : M10x 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher…
Collection of screws (ISO 10642 / DIN 7991) including : M14x 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher…
Shiftknob I modeled which can take a 608zz bearing, just print this and whatever matching fidget spinner you can find (I used this one: https://www.printables.com/model/346220-fidget-spinner ) that takes a 608zz bearing and you're good to…
Locking nut M10x1.5 3mm widened for the FPV Gimbal by Bacon2002
Plugs/thread protectors for Milwaukee M18 Angle grinders and others using M10x1.5 thread. Also includes cap for handle
Entfernen Sie den Original Griff und den Connector am Filamentsensor inkl. dem blauen Clip. Schrauben Sie die neue Steckverschraubung in den neuen Griff und befestigen Sie diesen wieder am Drucker. Nun können Sie den PTFE Schlauch einfach…
Konstruktionsbeschreibung Dreifuß-Adapter für JBL Control 1 Lautsprecher 1. Projektbezeichnung Konstruktion eines Dreifuß-Adapters zur sicheren und stabilen Montage eines JBL Control 1 Lautsprechers auf einem handelsüblichen Stativsystem…
i designed a textured gear knob with an m10x1.25 thread
gear/shift knob M10x1,25 / M12x1,25 size 42mmx42mmx138mm printed in petg
I stripped the adapter that came with my off brand shift knob and sketched this up. The outer threads are M17x1.5 and the inner threads are M10x1.5. Used on a 2012 Civic Si. I used PLA in the winter and it held up just fine but switched…
