Liczymy pasujące modele…
A mount that can hold 360 to 120mm radiators or fans. I needed a mount that could support a 240mm radiator for my GPU and could only find models for 360mm. For 360mm radiators just screw in place and then slide onto the poles of the case.…
When you need to pile mortar into a broken hole in the wall . I used a nail as a piston. Note: If you like this model (which is not behind a paywall) you can buy me a coffee. Když potřebujete narvat maltu do rozbité díry ve zdi. Jako píst…
This is a Maltese cross I designed for a retired firefighter. I printed in Prusament PETG signal white. Temps were 250c nozzle, 85 bed at .15mm layer height. Turned out really good! Hope you enjoy! Update: added the design for anyone who…
For commercial licence: Patreon https://www.patreon.com/c/MiniFlexi Say hello to the Mini Flexi Maltese Dog – a cute, articulated Maltese Dog designed for effortless 3D printing! This model is 100% print-in-place , meaning no assembly…
Replica of the prop used in the 1940s movie. This is a remix from Colin Freeman model.
I always wanted to make a candy dispenser since I baught my 3d printer, here it is. It has a anti-return (replaceable) mechanism, doesn't need any support and just required some screw. I've tested multiple versions to not crash MMS, but I…
Other necessary components: 2x screw M3-10 Printing parameter: Nozzle: 0,4 mm Layer height: 0,2 mm Perimeters: 2 Infill: 15% Supports: None Filament: PLA
I created this bracket to allow for a large gpu to be installed horizontally. Mounting wholes are sized to use fan screws to attach to the P3's frame.
The important things to know about this print are the following : It works It can be improved Filling and painting is needed for best result As can be seen from the referenced remix, I made a full size print of the Maltese Falcon some…
🐾 What is a Maltese Puppy? Breed name: Maltese ( Canis familiaris ) Origin: The Mediterranean island of Malta — one of the oldest toy breeds in the world. Group: Toy (AKC) / Companion (FCI) — bred for companionship, known for grace,…
I did not like the orignal hdd cage of this case. Also it offered only place for three 3.5" hard drives and it was hard to access the drives. As I am using this case as a server, I wanted quick access and place for 4x 3.5" harddrives. In…
Detective Tom Polhaus: "Heavy. What is it?" Sam Spade: "The, uh, stuff that dreams are made of." Update Jan.21, 2012 : Added the full size STEP file (unmodified - one piece) for anyone who want to play around with it. The Maltese Falcon…
The model has been made only from the picture and the dimensions have been just roughly translated. Printed on a Prusa Mk2 with support Resolution: 0.15 / Infill: 20% Malta_Balcony_1.stl is with a ribbed roof Malta_Balcony_2.stl is…
Installation and assembly depicted in the above video. Thermaltake Core P3 TG Pro only comes with a single fan mounting bracket. I used mine on the side of the case and wanted to limit the amount of dust coming into the case from the top.…
flexy dog maltese inspired by flexy cat , model may be small but you can allways resize it to the size you want
🇲🇹 Merħba Malta! Welcome to Malta! This stunning model full of detail was created by Dany Sánchez , available in the following versions: Complete Split in 2 parts, for faster printing, or print at larger scales The Cittadella , also known…
Se recomienda utilizar soportes, la altura de capa puede ser 0.28 sin problemas ya que es un accesorio para utilizar al sumergir la pieza de cerámica en el esmaltado y evitar marcarla con los dedos.
This was designed specifically for the Thermaltake Tower 300 Computer case to stop your fingers and cables from getting caught in the fan blades when taking the top panel off. This can also be used for the optional rear fans connected to…
I made this model in order to keep using my old case, the Thermaltake Versa H17, but with my new processor that produced much more heat (i5-12500). However, the stock H17 is not a very good case in terms of airflow, and there are…
This is my latest version of my radiator bracket for Thermaltake Core series chassis. This one should allow you to mount a 360mm X-flow radiator between two posts of your Thermaltake Core P3. It should work on any side of the case you…
Thermaltake Core P3 5.25 Vertical Drive Bay Print Settings Print with the bottom side on the build plate (for orientation see P3 Dual Drive Bay.3mf). Needs lots of supports
Thermaltake Core P3 120mm Fan Mounts. Use rubber foot screws to secure.
Thermaltake Core P3 PSU Cable Cover
This bracket for the Thermaltake Core P3 with the curved or flat glass side panel allows an additional three 140mm or 120mm fans to be mounted or any 120mm, 240mm, or 360mm radiator at the top or front of the case. The only other parts…
Se recomienda utilizar soportes, la altura de capa puede ser 0.28 sin problemas ya que es un accesorio para utilizar al
This is a remix for mounting EK-Quantum Kinetic TBE D5 pump/res combo units. It has been shortened to allow the fittings to exit the rear along with relocated mounting holes for the standard bracket. I also thickened the vertical mounting…
Mounting bracket/arm for fans or radiators for the Thermaltake Core P3 chassis. There are 2 versions depending if you are mounting a 120mm or 140mm type of fan or radiator: 360mm mount (slimmer) (For 120mm Fans or 120/240/360mm Radiators)…
This is a model of a firefighter maltese cross made into a extruder visualizer. I recommend printing them separately so when you do the color change it doesn't change the color of the back piece. However it will be hidden so you can print…
I recently built a new PC in a Thermaltake Core P5 case. As you can see in the pics on the website and my ‘before’ photo, you can see the power cabling easily. I have the case mounted to the wall behind and above my monitor, so this…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This pair of brackets will allow you to suspend a U-flow 480mm radiator between two of the window-mounting corner posts on your Thermaltake Core P5 chassis. They should allow you to place your rad on the top, either side, or even the…
An 8 bay 3.5 inch HDD enclosure designed around the Jonsbo N3 backplane which can be purchased separately for ~€15. I have also Included a mounting piece for the Thermaltake CoreV21. The main assembly is fastened to the mounting plate…
I've gotten tired of gothic terrain and wanted something different. Going for Art Deco retro futurism vibe. I'm using for Battletech but ruleset agnostic. I'll continue to put more models out in the line. Prints fine without any supports.…
While this is registered a s a remix, it is actually a completely new set of models with STEP files included. There are two versions. The threaded version is designed for use with standard g 1/4 fittings for water cooling. The three small…
Updated to have better socket retention and more solid clip engagement. This is an ATX 24 pin bulkhead pass through for the Thermaltake Tower 900 case. For securing ATX 24 extension cables. The rubber grommets from the Tower 900 case can…
This is a grommet insert giving you a bulkhead that will accept two 8-pin ATX power connectors. Either EPS/CPU or PCIe are compatible. This secures the cable and gives it a very clean look. The design allows you to run extensions from…
Made this for a friend in this line of work, thought it would be cool to post the files. Instructions Both files are very large and need to be scaled down before use. Also the keyhole is not included in the file, but can be easily created…
A slight remix to add colours for bambulab AMS
J'ai réalisé cette silhouette murale du plus célèbre des marins de la bande dessinée. Enjoy !
This is a cover for drive bays on a Thermaltake Armor computer case. I designed it specifically for this case (which is rather old now), but I'd be willing to bet it works with other cases too. It might take some slight x/y adjustments in…
Menší model maltézského mechanismu. Trošku drhne, ale jinak je oukej.
I printed this with no supports. When printing use post processing to change color where the cross ends. If you don't want to change the filament mid print, I also made a model to insert in the top space but it will need to be modified to…
Note: I specially designed this to lock in place using old springs that you've likely got lying around from replacing weak print-bed springs, or the spring near your extruder knob. Smaller springs can be used (I'm using a combination of…
What is this? This is a basic bung I designed to seal the 25mm opening in the ball valve of the malt pipe of the Brewzilla 35/65L Gen III all in one brewing device between brews, when it is in storage in my garage. Previously I was using…
🇲🇹 MALTA 🇲🇹 If you are Maltese, a vexillologist (look it up!), have international friends, or simply don't know what to do with your color filaments, this Flag Coasters collection is for you! This is not the actual flag of Malta, but the…
I made these to cover some gaps I am not using.
After the great success of my Flexi Yorkie, I decided to create a Maltipoo ! There are very few high-quality Maltipoo models available for free, so I wanted to share this one with the community. 100% Print-in-Place: No assembly or…
I needed a place to put my spare change and I figured since I had a replicator I could just print something. So I went looking for a piggy bank but I couldn't find models I liked. That's when I decided that I would make my own. The…
Originally published here: Amalthea scaled one in four million by tato_713 - Thingiverse This model was rendered using MATLAB R2016a on the ICQ model of the PSI made by Philip Stooke from the data of the Galileo and Voyager missions. The…
A simple adapter for an Aquacomputer D5 NEXT pump on the mounts of the Thermaltake 900 Tower. I use them with two layers
Check my repository on github for more information: https://github.com/ducntq/3d-printed-malt-mill
I've had a Core P3 for a while and have been pretty unhappy with the GPU riser situation. The included 8-slot bracket causes you to either have a modern (ginormous) GPU right against the case glass where it can't breathe, or further back…
simple cockie cutter. print upside down
Remixed Adam's Maltese Mech as a fidget toy
Data source: eu_dem_v11_E40N10 Copernicus Used qGIS and DEMto3D plugin vertical exegeration at x10
I wanted to use only 1 fan for my mATX server build to be as quiet as possible. Therefore I wanted to mount the original 200mm fan above the motherboard in addition with the Alpine AM4 Passive cooler (…
For this model you will need an assorted set of M3 bolts, nuts and a few washers (or you can print spacers but I didn't). The pics are quite dusty but that's just proof that it works. Printed: 1x Grill_Frame_All 2x Mesh_Grips_Sides 1x…
La silueta está conformada por dos partes que se imprimen en un solo momento, la base y la figura; una vez termina de imprimir la base pide un cambio de filamento. En la base hay espacio para colocar un nombre. Tamaño aproximado de 13 x…
This is a quick mount I designed to mount the pump / resevoir of the EKWB fluid gaming set more to the top in my Thermaltake Core P5 case. The Mount uses only hardware that is included with the fluid gaming set and is pused into a hole in…
This is for the Thermaltake Core V21 as a customizable badge for the front panel. I created a Noctua for example but this base is good for you to put anything on. It takes a 10x1 mm magnet in the whole in the back to stick to the case.…
Przedni panel do obudowy thermaltake core p6 w kształcie plastra miodu dla maksymalnego przewiewu. Drukowane w jakości low na standardowych ustawieniach drukarki creality ender 5. Wybór jakości dla tego kształtu nie ma znaczenia. Trzy…
Remixed from mikebin41 https://www.thingiverse.com/thing:2188329 Changed up the dimensions to better fit larger headphones and added a hanger to reduce the need for a screw or double sided tape.
Iconic Movie Props - The Maltese Falcon - 1941
UPDATE: Source .SCAD files here: https://github.com/SimplifyAndAddCoffee/KeyV2_Advantage download the full repo and make adjustments to the keymaps. There are 4 sets of files for different printing options. Blanks -- These are just the…
Easter Bunny coloring Eggs
This leg for the Thermaltake Core Case P3 (https://www.thermaltake.com/products/chassis.html?cat=190) has a cutout for the power supply. Remixed From https://3dmakers.thermaltake.com/dwgallery.aspx?s=170
3D scan of a replica of the emblematic statuette that was unearthed from the Hal Saflieni Hypogeum, Malta, and made into keychain. The Sleeping lady is an artistic masterpiece created in the Neolithic period. This represents one of those…
If your GPU is heavier, the Frame is hanging down. This Print solve the Problem.
Hey this is a first revision of a fan bracket for my Thermaltake Core P3 open air case. It does not have mounting holes yet. I just drilled with the appropriate size drills for the fasteners I used. There is a version of the case that…
Remodeled Headphone Hanger for glass side on Thermaltake View 71 to be in one piece, as it printed in 2 separate pieces form the original model. (At least with Prusa Slicer) Fits my Steelseries Arctic V2 Print instructions I used: PLA…
Usb c support for pc case for (thermaltake core p3) Cable usbc : aliexpress.com/item/1005003141440210.html?spm=a2g0o.order_list.order_list_main.20.10785e5bOV2uN6&gatewayAdapt=glo2fra Just screw the cable with 2 M3 10mm screws in the…
🕰 Maltese Steampunk Bust – A Victorian Pup with Attitude 🐾 Step into a world where gears grind and goggles gleam! Few supports are needed. I used organic-style supports, which peeled off cleanly with minimal effort. Adjusted the Z-top…
I needed a power supply shroud to cover up the cabling and PSU in my Thermaltake Core W200 case(right side) so I made this. It's got the AMD and Ryzen logos in it for my build. I uploaded them separately so you can choose to add them or…
Comic Book Art - Corto Maltese by Hugo Pratt (1967–1991)
This is a SSD slot cover for the Thermaltake Core P3. This model covers all the ugly cables and adds a way to customize your case. The 2 parts are printed separately and can be put together. There is no glue needed.
My wife wanted us to stop using plastic drinking tumblers and straws, but I was unable to find any glass tumblers that held enough water. I drink a lot of water, so I wanted something that would hold at least 32oz. I found these 32oz…
Something I whipped up as I couldn't find one for maltese. Enjoy and please do let me know how it goes and if there's any improvements that can be done. thanks
headphone Hanger to work from glass side of View 71 Print instructions use Supports
Einfaches Malteser- oder Johanniterkreuz
For mounting the breakout box for my HTC Vive Pro inside of a Thermaltake Core Case P3 computer case (https://www.thermaltake.com/products/chassis.html?cat=190). Print Settings No supports needed if printed with the front or back on the…
This is a replacement panel for the Thermaltake T600 tower pc case. The case comes with a second panel to use with the Thermaltake LCD, but that screen is much smaller. This bezel is designed to match the clips and protrusions on the pc…
Allow the included brackets to be attached to a 120mm fan. The bracket is held in place with standard computer fan screw and the original bracket is screwed in M3x3 brass inserts. I inserted the brass inserts from the back of the brackets…
For mounting the breakout box for my HTC Vive Pro inside of a Thermaltake Core Case P3 computer case (https://www.thermaltake.com/products/chassis.html?cat=190). Update - I've created a 2.0 version. The new version has a circular cut out…
Simple mount for Primochill CTR Reservoir w/ D5 Motor into the Thermal Take Tower 900 Holes are for M5 Grub screws, if your tolerances are good you only need one! Mounts to the frontmost reservoir plates in the case using M5 screws, you…
Simple thingie for holding a container of tip tinner on Skadis, specifically Thermaltronics TMT-TC-2 Tip Tinner in 0.8oz (20 gram). On Amazon, ASIN B00NS4J6BY . You will need: 1x this model 1x Skadis T-nut , 2.5 mm variant 1x M2.5 hex nut…
Replica of the original power/reset button for Thermaltake the tower 300 PC case. It's useful as replace or if you want to change the buttons colors. Copia dei bottoni originali avvio/reset del case Thermaltake the tower 300. Utilizzabile…
This is a shim too mount Ultitube D-5 pumps on the Thermaltake Tower 900 Pump mount.
USB Hard disk slot mount for the Thermaltake Core P3 case. Likely also compatible with the Core P1 and Core P5 cases. The mount holds the drive at a 27 degree angle to allow space for the USB3 cable when multiple mounts are stacked. Print…
This is a 2 part replacement foot for the Thermaltake V1 ITX case. The inner part (nut) carries an M3 nut. The fit here is snug, so you may need to press it in. The hole through the foot is sized so an M3x8 bolt will not protrude past the…
fidget malteser | Geneva drive | Malteserkreuzgetriebe → 0.4 Nozzle → 0.2 mm Layer Height → 30% infill → PLA Deburr all parts well and remove the Z-seams from the pins with the file or similar tool. The pins and gear parts should move…
You can print it either way, flat side or the other way around. Supports are needed for both options. See pictures Printed in PLA with following Settings: 2 walls 5 Top layers 5 Bottom layers 20% infill 0,2mm layer height normal supports
A spacer plate modelled off the bottom of this model: https://www.printables.com/model/204631-thermaltake-the-tower-900-pump-mount-adapter-for-e for of you're wanting to raise your pump/res up. I have included the .step for easy…
This is a mount to fit your EKWB DCC pump onto a Thermaltake core P3 case stock water bracket. This goes between the pump and the stock case bracket to mount securely and look good. This uses the stock EKWB DCC pump screws and a set of…
Malteser und DRK Plaketten für die Nachtsichthalterung des Busch Protective ATR-1
I lost the secondary spur gear for my Schmidling Maltmill in a cross country move, making my Gear Drive option just a passive roller. The Gear Drive Option is/was great, turning one roller slightly faster than the other, not only crushing…
No idea what the model for this hard drive cage is. I tried to replicate it best i could. However, this results in some printing issues, if i find the time i might revise the model later. The retention nubs are slightly too short.
I designed this case riser for my Thermaltake TR100 to improve cooling and also direct the air out on a specific side. I felt there was a lot of “stagnant” hot air below the case which often was blew towards my keyboard and it didn't feel…
This angel Maltese memorial figurine is created as a gentle tribute to a beloved companion with a delicate presence, bright eyes, and a deeply devoted heart. The peaceful sleeping pose, combined with the Maltese’s graceful form, flowing…
