Meowl
The Meowl cat I will include a GCode file and an STL file.
- Pobrania
- 1943
- Polubienia
- 43
- Ocena
- 5
608 modeli
The Meowl cat I will include a GCode file and an STL file.
Some users may find the +/- variants fit their machine's alignment marks and materials better than others. Luckily, these are quick to print and easy to swap out! I like to keep spares around as well. For ~$0.50 for a set of 2x5sizes, why…
I designed one support rail with an edge/guide at the left side (for proper alignment of the cutting mat) and a generic rail without edges to be used in the middle and at right side. Each rail comes with two parts for easy and stable…
Fortnite Muscle-Cat Atlas Statue. Meowscles Add your own globe, thing, whatever you want, to the plate.
I'm a fan of Alfa Romeo and I like to share with you my passion. Senza cuore saremmo solo macchine Enjoy it ;)
Print in something that is not brittle, preferably with a brim. There are no supports required as the model features in-model supports itself (between the lowermost plate and the one above). Make sure to enable “detect thin walls” and…
Place the guide on the left hand side of your cameo 5. Place the mat against it and just press the LOAD button .
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
This is a custom tool holder for the Silhouette Cameo 4 desktop cutting machine. This holder fits into both socket 1 and 2. The hole in the middle is 4 mm diameter, and you can use an M3x5mm brass insert and an M3 screw to lock your tool…
This cupholder insert fits into one of the two central console cupholders in the Alfa Romeo Giulia and Stelvio. It holds a smartphone in place and prevents it from moving around and. It creates a dedicated space for a smartphone in the…
Magnetic rifle scope with fron 50 mm and rear 44 mm diameter. You need 12 pices of gagnet 6x2mm (Aliexpress) - https://www.aliexpress.com/item/1005005884332595.html?spm=a2g0o.order_list.order_list_main.15.8b511802zbc0Fz Scope is Meopta…
This is a simple rework of the arm of the design of russiancatfood's ( https://www.thingiverse.com/thing:696271 ) that i like so much. I don't like the original square arm so i decided to make a personal rework. I've integrated a ball…
If you used this part consider leaving me a small tip using the below links! https://www.buymeacoffee.com/wafflecart https://ko-fi.com/wafflecart Silhouette cameo 5 roller replacement parts. This can be used to replace the parts on the…
Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…
Original file from MeowCha on GrabCad: FN FAL | 3D CAD Model Library | GrabCAD The OG file was just one big stl file. I separated all the files on this one and exported each of the parts. I also included an f3d file of the original file…
Killflash meant to press fit onto the front of your romeo5. This doubles as a sacrificial lense cover for airsoft. I couldn't find a model anywhere so I decided to make one. Enjoy Also will work for Aimpoint CompM5s optics also
This is an STL printed laying down at low layer heights with different colored filaments with the goal of blending the filament colors to make both a multi-color and exaggerated depth image much like a cameo or bas relief. The file will…
Full Image Catalog The complete gallery of my works can be found at Portfolio . You can search by the file’s reference number or simply click the preview image to open it directly. This Chibi Idol Demon Hunter model mixes the glamorous…
Here is the model for Romeo Bear. Romeo is a good Friend of Barry, and like his friend he seems to just want to be your friend too, do you have space for Romeo? maybe he can keep Barry Company. I hope you enjoy, Thanks Bugman If you like…
I designed this homeoffice cup holder for a christmas gift for my brother. Easy to clamp onto the desk. Printed the first 6 layers in red and switched to blue at layer 7. The last 4 Layers have been printed in red too. Support required !…
Frustrated with registration failures, I've been working to mechanically align my prints so that I can get consistant cuts without tedious manual registration corrections. These extensions were created to guide a cutting matt through with…
Here an cool Mod and Cover for the Stealthburner Toolhead that Supports: LGX LGX Lite CW1 CW2 Designer: https://grabcad.com/sandman-8/models
Check out this 3D model made with HueForge. If you're new to HueForge, it's a cool tool that lets you mix different colored filaments in your 3D prints and preview how they will look. The models produced are designed to be printed flat,…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Meowscarada, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other…
This is an adaptor which will allow a Roland blade holder to be used in the Silhouette Cameo 4. These blade are easy to change out, and much less expensive than using new Silhouette ratchet blades. A compatible Roland blade holder can be…
My very first 3D printed object (early 2015). Actually made for testing purposes. I had to change a few details so it can be placed vertically without falling apart. Category: Other
I remixed my remix (This Original is Ductippi's CB09 adapter ) again because the first version was a bit too small for me when I changed the tools and I wanted to have a surface on which I could mark so as not to mix up the knives. Then…
Cat Cell phone stand "Meow" label, 90mm high, 50mm wide. Resized for a more stable stand. Reconfigured tail for better fit of 10mm thick phone. Added Meow label. Print on side. No supports needed. Edit: Added “Blank” version for easier…
Here is a great adapter that will let you use a sharpie with your Silhouette Cameo 4. The fit for the sharpie is tight for a reason, its a pressure fit so it won't come out. Print Settings Printer Brand: Creality Printer: Ender 3 Pro…
Killflash for Sig Romeo5 GenII red dot optic Wanted a killflash to sit inside the optics rather than outside so here it is.
Wird in die "Justierbuchse für Schneidemesser" auf der linken Seite des Cameo 4 eingesteckt und bietet einen Anschlag für Ihre Matte. Originales Design von "cleversomeday". Allerdings passt der Abstand beim PRO-Modell des Cameo 4 nicht.…
Guide and support for cutting mat for Cameo 3
Replacement buttons for Alfa Romeo 147 electric windows
3D PRINTING SETTINGS Nozzle: 0.4 Material: PLA Layer hight: 0.2 Infill: 20-100% Print it with multiple colors: Base color is black. Insert filament change at 1mm hight. Next filament change is at 2mm hight, insert the color you want the…
Speaker adapter for Alfa Romeo 159 (potentially compatible with other models). Dimensions: Diameter of the bottom side circle - 170mm Distance between the outer holes for screws - 125mm Distance between speaker screw holes - 110mm Outer…
Alfa Romeo Keychain - Portachiavi - Porte Clès - 钥匙链 Resize/Scale to adjust dimensions If you download, please give me a made and share. It will really helps in my progress - Thx All trademarks, logos and brand names are the property of…
I've tried this pen holder ( https://www.thingiverse.com/thing:4336648 ) in my silhouette cameo 4, but it did not fit. So I've just re-created it. I've also added more strength to the center pins. The diameter for the pens is 11 mm. All…
This part replaces the original Cameo middle feeder rollers, as they're not providing enough pressure to support vinyl rolls and other materials for mat-less cutting. The problem to be solved There is a significant gap between the base…
Radar Shield per eliminare il problema dell'accumulo di acqua, sporco e neve che disattiva il radar anti collisione in caso di forte pioggia o nevicata. Testato con tutte le impostazioni di sensibilità non influisce sul corretto…
The v14 file has extended lips for more support if gluing down to the bumper My bumper tabs broke, so I took one and scanned/modeled it. I test printed in PETG and attached it to the bumper with a 2 stage epoxy, we'll see how long it…
Blades holder for 6 silhouette cameo 4 plotter blades to be placed onto Skådis wall.
Print it with supports on the builtplate. Use more heat resistant filaments like PETG of ASA.
Modified design of RomainCNC's magnet based holder for a phone holder to fit on the central console of an Alfa Romeo Mito ( https://www.thingiverse.com/thing:4413656 ) by adding a ball so most swivel based holders can fit on it. V1 has an…
This 3D printable cat bowl model is designed to provide a comfortable and stylish feeding solution for your feline friend. With dimensions of 14x14.5x4 cm (5.5x5.7x1.6 inches), this bowl is spacious enough to accommodate a generous…
This is a Multi-Penholder for the Cameo 4 because I don't like the original pen holder at all. I have the impression that the pen tip sits too close to the paper and that it is pushed down even further by screwing it in. In addition, the…
3D PRINTING SETTINGS Nozzle: 0.4 Material: PLA Layer hight: 0.2 Infill: 20-100% Print it with multiple colors: Base color is black. Insert filament change at 1mm hight. Next filament change is at 2mm hight, insert the color you want the…
The model consists of two parts!
🟩 🟦 🟦 🟪 🟥 🟧 🟨 I remixed the Cameo 4 adapter as I had a few problems with it: My original print in resin did not fit my CB09 due to manufacturing differences It was not possible to properly secure the adapter with the push fit thing in the…
Large printer (15ct.) and small printer (12ct) Vinyl Roll holder no supports needed. Recommend using a brim and no support are needed for this print for Ender 3 and similar size print beds I added a 12 hole file for smaller print volume.
I've printed a few in this style that sit on our skirting board next to the cat bowls. Load in to PrusaSlicer and change the filament at 2.24mm (Layer 7 @ .32 layer height). If resizing, change layer change to suit.
Four colors printing for new Alfa Romeo Logo Printed with BFB IeC Refurbished Category: Signs & Logos
Nabeldecken für viele Serienfelgen der Marke Alfa Romeo mit 50mm Durchmesser. Original Artikelnummer: 60652886 Die Embleme gibt es sehr günstig aus China wie z.B AliExpress oder andere Gedruckt in massiv PETG. PLA ging bei mir nicht, da…
This is a collar to hold Stabilo pens more centered in great pen holder made by ngaillet . Category: Art Tools
3D PRINTING SETTINGS Nozzle: 0.4 Material: PLA Layer hight: 0.2 Infill: 20-100% Print it with multiple colors: Base color is black. Insert filament change at 1mm hight. Next filament change is at 2mm hight, insert the color you want the…
This is holder/box for Silhouette Cameo sketch pens and cutting knives. It will hold the standard 24 color pens with three spaces for additional ones and three spaces for cutting knives. Print instructions After printing, friction-fit the…
I’m now on Patreon! If you'd like to support future projects or legally sell physical prints of my models, consider joining my Patreon. https://www.patreon.com/cw/MILITECH This is a dummy model, approximately the size of a €1 coin. It is…
3 sizes of cupholder 56mm/2.2in ideal for 250ml/8.4oz cans 68mm/2.7in ideal for 500ml/17oz cans 76mm/3in ideal for 10l/338oz Americano shakes
3D PRINTING SETTINGS Nozzle: 0.4 Material: PLA Layer hight: 0.2 Infill: 20-100% Print it with multiple colors: Base color is black. Insert filament change at 1mm hight. Next filament change is at 2mm hight, insert the color you want the…
I designed a model of the "cat sword" from stardew valley and terraria items. The 3mf file opened as a project in prusaslicer have the stops for change the colors. You can scale the model for cosplays. Post your make+Press Like&Enjoy!…
Silhouette Cameo 2 - Mat Guide The Cameo 2 is an older machine but still widely used. I got one recently, and I was looking for a mat guide to help load the mat into the machine. The one I found didn't really fit at all in the hole, so…
Scale: 1/1 Wheel Size: 17x8.0 Offset: 35 Bolt Pattern: 5x98 TR Sadece kişisel kullanım içindir. Referans aldığınız ölçülerin oluşturabileceği zararlardan sorumlu değilim :) Tüm Alfisti'lere selam olsun! EN For personal use only. I am not…
Linker und rechter Clip um die Hutablage zu halten. Möglichst massiv in PETG drucken.
Description This is a Hex pattern vent designed to replace the top part of the OEM vent. Since it does not provide any way to close or open the vents, it's not something that I personaly use and it was more a props to test another…
Vertical wall mount for a CaDA C64005w Alfa Romeo F1
Positive battery terminal cover for Alfa Romeo Giulietta. Files has been updated so now the “Giulietta” and “Alfa Romeo” logo is turned correct. Don't mind the pictures. Sorry It is based on a pre-facelift Quadrifoglio Verde 2010, but it…
Not my model, just remodeled/reuploaded to be printable with multiple colors Uses 4 colors Meowth for multi colored FDM printing. Original Artist info: Meowth for 3d printing. Help me keep doing what I love! ❤…
3D MODEL DESCRIPTION Alfa Romeo 156 Facelift keychain. 3D PRINTING SETTINGS Nozzle: 0.4 Material: PLA Layer hight: 0.2 Infill: 20-100% Print it with multiple colors: Base color is black. Insert filament change at 1mm hight, use Gray color…
Badge/Keychain with Alfa Romeo quatrefoil logo. You can print two color background with “two color” models.
Meet Count Meowcula, a little bat cat with big eyes, tiny fangs, and plenty of charm! With pointed ears, bat wings, little paws, and a long segmented tail, this spooky companion is ready to claim a spot on your desk or shelf. The pictured…
Pieces to build a roll feeder for your vinyl cutter such as those by Cricut or Silhouette. See Materials and assembly.txt for instructions Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16mm…
Hello one and all! Whitewolf 3DP back here with a useful little print for crafters and makers out there. My wife recently bought a Silhouette Cameo 4 and I noticed the tools had exposed blades and we have a toddler who is curious about…
A little stackable organizer for homeopathy tubes - 20pcs. Stackable box printed with 0.4mm (layer height 0.28) and 0.6mm (layer height 0.32) size noozle. With bigger noozle size the time is significantly reduced. Homeopathy tubes…
Tired of the absolutely worthless cup holder in your Alfa Romeo 159? Not anymore with this print :) Now you won't spill your energy drinks all over the shifter and the buttons. Does not block cigarette lighter if you're not using the…
This filter holder slides onto the D shaft below the lens where the red safety lens usually is. Category: Parts
In case if roller on main plotter's shaft gets loose just clip this stopper on and you are ready to cut!
Gridfinity Silhouette Cameo Tool Holder
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200mm sp. 3mm
I have seen a few variations on different websites but nothing that I really liked for my Silhouette Cameo 5. This has several key features: STL (unlike alternatives that use other model formats) to make it easier to print 3mm height…
Just a penholder so you can use just about every pen in the Silhoutte Cameo. It should work in most others also but i did not check this. You only need to add a small m3 nut in the opening and with a small m3 screw you can lock the…
In these files you will find: A .3mf and .stl for a single card holder, meant to hold a trading card game (TCG) sized card. A .Studio3 file for a Silhouette Cameo device to click/drag image files to. You print the pages on sticker paper,…
a small 6 tool shelf for your Silhouett Cameo 4 Tools/Blades. Im a noob so its not perfect but my first try.
Button for windows Alfa Romeo Category: Parts
Unfortunately I forgot to take pictures of the installed spacer but, as there are so few designs available to fit this car, I thought I'd get these out there. I've included the STL as well as the STEP files for those who'd like to have a…
A replacement Alfa Romeo GT logo that I made for a friend of mine who lost his. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Category: Vehicles
Alfa Romeo Giulietta Ersatzteil für den Bolzen des Tankdeckel Part-No. 51851496 Am besten in ABS drucken.
Italian: Se anche tu hai strappato il parafango anteriore fatto in moquettes a causa di una pozzanghera profonda, stampa questo utile rinforzo che evita di peggiorare la situazione. L'oggetto è stato provato su un Alfa Romeo Giulia…
I lost the rear wiper cover for my Alfa Romeo Mito and needed a replacement. It looks like a common design for various car brands and might also fit for others (not tested). I am happy for feedback and like to hear if this fits (or not)…
Silhouette Cameo pen holder custom made for various roller ball pens. Made for exact fit, no need to measure height with popsicle stick etc. Adapter for other pens will be added as we go. *might not be dimensionally right for your…
Print face up. With support.
3D MODEL DESCRIPTION Alfa Romeo 147 Facelift keychain. 3D PRINTING SETTINGS Nozzle: 0.4 Material: PLA Layer hight: 0.2 Infill: 20-100% Print it with multiple colors: Base color is black. Insert filament change at 1mm hight, use Gray color…
3D PRINTING SETTINGS Nozzle: 0.4 Material: PLA Layer hight: 0.2 Infill: 20-100% Print it with multiple colors: Base color is black. Insert filament change at 1mm hight. Next filament change is at 2mm hight, insert the color you want the…