Liczymy pasujące modele…
I got a suggestion/request to put meshing herringbone gears on the outside of my rings, so one can drive another. Great idea, and here it is. Thanks to pixel9 for the idea. Playing with 4 gears that way is more crampy than relaxing…
The original PSU mounting bracket got lost for a bit so I needed a replacement. Tested for fit on Fractal Design Meshify 2 Mini. Should fit on other models as well, if the internet is to be believed.
I was compelled to sculpt his handsome pumpkin-looking fruit from the popular manga and anime Delicious in Dungeon / Dungeon Meshi by mangaka Ryoko Kui. This handsome gourd is available both in a single solid model, as well as a hollowed…
This is a Wheels mod for the Fractal Design 7 XL and Meshify 2 XL case, that i use as my huge DIY NAS/Server. (Also works with the non-XL Fractal Define 7 and perhaps more) The original Idea and files come from Wendell at Level1Techs I…
I recently saw the adaptive meshing and purging on Prusa MK4 and Klipper KAMP meshing and was really impressed! It is a really great feature, since it saves time on the probing, produces higher-density mesh , eliminates the purging skirt…
Geared Finger Fidget – The Gears Are Connected! A satisfying 3D-printed fidget toy that connects all four fingers through a set of interlocking helical gears. Slide your fingers into the four rings and move them — thanks to the…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Adaptor for Mounting a 140mm Fan on the Bottom of the Case where the shroud is normally located. Printed in DasFilament PETG Black.
This is my version of Falin's Mace-Staff from Dungeon Meshi. She's seen using the staff in various flashbacks and in some of the post-end of the main manga series content (keeping it vague for spoilers for anime-only watchers). The staff…
The Meshify 2 case from Fractal does not have a lot of vent holes in the inside bottom of the case (under the GPU). Half of them are pretty much blocked by the powersupply. If you are using fans to suck air in from the bottom, then a lot…
3 types of Marcille's familiar. Use the back of a toothpick to add eyes.
3D printable covers to turn any real book into Thistle's tome. Measure the sacrificial book (try to find one that is roughly 7inches x 9.5inches x 1.6inches at your local recycling center) and scale the covers and spine accordingly in…
2 different top pieces for the top fan grille area of the Fractal Design Meshify C case: -The "solid" file is just a flat piece made to finish the top of the case off aesthetically if you are not using the top most 2 fan mounting…
One (overly engineered) staff for Falin Touden from Dungeon Meshi. This model requires 3/4" schedule 40 PVC pipe for the handle. If you follow the pictured slicer layout, this model does not require any supports. All pieces have built in…
I installed a 280mm radiator in my Meshify 2 case. So I wasn't able to fit a third 140mm fan in the front of the case. Because I needed the extra airflow to cool my GPU I installed a 140mm fan at the bottom. But with the original cover…
These two spacer bits allow fitting fans (up to 30mm in depth) outside of the Fractal Design Meshify C case without any gimmicks. No glue, magnets or such needed! Just slot in these pieces to have the mesh snap into its place naturally…
Treasure Bugs from Dungeon Meshi! High in protein and best served pan fried. Salt lightly while cooking and be sure to coat them fully with oil. When setting up the MSLA print, Use light supports for the legs. They are very thin and…
This is a bracket to allow native installation of a Coolermaster Riser Cable PCIe 4.0 16x 300mm in a Fractal Design Meshify 2 XL (non XL should also work). The bracket screws into the cage over the PSU as the native Fractal Design riser…
If you are using the Fractal Design Meshify 2 Mini with a 3 slot GPU, your GPU will be starved of air. Unlike the Meshify Nano or Compact, the Mini does not come with a GPU fan shroud funnel to direct air to the GPU, so I made one. This…
These blanking plates are for filling the small gaps between the front intake fans. Screwholes need to be tapped with an M4 tap. May work for other cases, as the distance between holes is the standard 105mm which is used with 120mm fans.…
A clean, simple cover for the Fractal Design Meshify C PC case power buttons. The original author designed this to keep the cat off the case... I haven't had this issue (yet), but it's also helpful to keep yourself from bumping the…
Thew feet will replace the existing ones on Meshify 2 (Same screws can be use to attach) and allow for adding standard desk chair wheels with 10x22mm connections (e.g.…
Remixed to add a hole for my GPU power cables to route through. Quick and nasty, just tossed a hole in it. Probably not going to look at this one again for support or anything but if you like it, enjoy! Category: Computer
This is a replacement panel for the front of the meshify 2. This allows fans to be mounted directly behind it with the radiator inside the case. Designed with 120 x 25mm fans. I happen to have ek vardar fans with non standard mounts,…
I had a Build with a Gigabyte 5070 Ti Gaming OC in a Meshify 3 Ambience Pro Because of only 7mm left in the Front and the new Air-Shroud you cant use the OEM Holder or any GPU-Support-Stand so i made this. Just unscrew 2 Fan-Screws, put…
This is a super simple blank badge. Reuse the stock screws hold on the original badge. Step and Solidworks files are included so you can modify to your hearts content.
Front and Rear Feet for SSUPD Meshilicious that holds (2) Displayport adapters and (1) HDMI Adapter
The first of hopefully a small collection of decorative vent covers for the old Fractal Design Meshify C case. It's been on my list of things to do for some time. Still learning the ins and outs. But next version should have a little more…
Printed these out to hold my skis on a wall. Still need to find something grippy enough for the camming surfaces to hold my skis.
This is a simple magnetic and stackable rack that is made to be placed on top of a Fractal Design Meshify 2 Compact Case. There's 2 variants: 190mm x 220mm 190mm x 190mm Print them upside-down. Support will be needed for the leg overhangs…
Did like the solutions available for one large slim fan that just sits on the spine that separate the case. Came up with this mount for (2) 60mm fans that sits above the motherboard side. Secured in place with one screw.
These are some quickly assembled standoffs to extend the Mesh section of the Fractal Design Meshify C. The intent is to give +/-25mm of space so that a longer GPU can be used in combination of a standard thickness radiator by placing the…
I was looking for a shroud that would fit in the PSU/HDD hole and allow the 3rd case fan to be installed in my Fractal Design Meshify C and couldn't find one so I made one. This fits over the PSU/HDD shroud hole. it doesn't screw in so it…
Walking Mushroom Keychain – Dungeon Meshi Inspired Here's a fun and quirky keychain featuring the adorable Walking Mushroom from Dungeon Meshi! Perfect for fans of the series who want to carry a little bit of dungeon charm wherever they…
If you mount a radiator on your Fractal Design Meshify C and the computer is mounted under the desk, trapped heat might be sucked in from the top. That is why i made this cover. Upside is, that you don't need the mesh filter anymore if…
Best printed with an infill suited for compression (e.g. cubic with 40% infill).
Fan adapter for Fractal Design Meshify C to bring more cool air to the GPU and to be able to fit another 92mm fan below two 140mm fans while taking advantage of this excellent air deflector. https://www.thingiverse.com/thing:4356080 Print…
Replacement HDD tray for Fractal Design Meshify C Computer case.
It's still being edited. This modeling allows for the fan to be forced to be installed on top while the hard drive is on the bottom. Basically, even if you add 140mm, 120mm like in my picture when there is already a hard drive at the…
Use M2 and M3 screws. https://twistypuzzles.com/forum/viewtopic.php?t=38545 Category: Puzzles
This model is created due to not having sufficient space in the front to house additional fans in the fractal design Meshify C. This replaces the plastic shell that houses the front filter. To install you bend the clips steel lips on the…
Make science hands-on and visual with this Gear Train Demonstration Kit, Print in Place, 4 Meshing Spur Gears, STEM Educational Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ…
Covers up the ugly bottom of the case between the airflow guide and front panel.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150.48x200mm in size You may print at higher layer heights below the Base Thickness of 0.4mm The Max allowed Thickness is 2.16mm and the Actual…
Round vase with wire frame meshing
Intermeshing Tiltrotor Quadcopter. Main rotors provide only lift, tail rotors vector to control attitude. It always crashes outdoors. Not sharing the firmware because it's too messy. Good luck fitting any commercial flight controller in…
A unique 3D printable creation — this Gear Clock Display, Print in Place, Three Meshing Spur Gears, Steampunk Desk Art Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - PLY…
This one appeared as a necessity to have the full flow of air going to the GPU after an upgrade to the RX6800XT and the need to lower the front fan in order to fit the card in the MeshifyC case. Printed on Ender3 from PLA. 30% infill,…
A gearbox in your hand. A gold sun gear and three silver planet gears snap onto posts in a recess in the top of this Thrustmaster TH8S knob, sitting flush with the rim. Rub your palm across the top and they all turn together. Knurled…
Gear fidget keychain concept: two meshing spur gears (module 1.5, 12T and 10T) on a 52 x 28 x 2 mm base plate with posts, retaining caps and a keyring loop. Built with native TrueGeometry Playground commands only (no Booleans, no…
Replacement HDD tray for Fractal Design Meshify C Computer case.
I was looking for a shroud that would fit in the PSU/HDD hole and allow the 3rd case fan to be installed in my Fractal Design Meshify C and couldn't find one so I made one. This fits over the PSU/HDD shroud hole. it doesn't screw in so it…
This is a modified version of the insert originally made by @Vovan for the Fractal Meshify 2 case. In my case, I slightly shortened the model because I have three 140mm fans installed in the front of the case. In addition, I added vent…
A basic 3d-model of the wok carried by Senshi from the anime Dungeon Meshi This includesa full model and one split into 6 sectors, 2 identical ones of each to be assembled with 4mm pins
A basic 3d-model of the axe used by Senshi from the anime Dungeon Meshi This includes a full model as well as one of the axehead split up into 7 parts for assembly using 4mm pins and a 50mm or 2inch staff
A basic 3d-printable model of the sword used by Kabru from the anime Dungeon Meshi This includes a full model as well as one split into 5 parts for assembly using 4mm support rods
A 3d model of Laios new sword from the anime Dungeon Meshi after the living armor episode It includes a full version as well as one split into 8 parts for assembly using 4mm rods
A 3d printable model of the sword used by Laios from the anime Dungeon Meshi This includes a full version as well as one with the ornament separated and split into 6 parts for assembly using 4mm rods
A basic 3d-printable model of the helmet worn by Senshi from the anime Dungeon Meshi
For anyone with a Fractal Design S2 case that wants to fit a full size radiator in the front, this replaces the PSU shroud and allows better airflow and (hopefully) better aesthetics. I highly suggest printing with tree supports on build…
Print out the hex nuts or use real ones for easy alignment. Originally sliced up for a larger printer so use Prusa Blade 1-3 + Blade Top if using a Prusa. Otherwise just use Blade Bot, Mid, Top if you can print 220mm on z. 1/18/23 Updated…
群馬県の某釜めしに付いてくる漬物の容器にV6ノズルをセットできるようになるアタッチメントです。 釜だけではなく、容器も再利用したい方にオススメです。
