Liczymy pasujące modele…
These bin inserts are for the Akro-Mils small parts organizer to allow storage of a larger variety of small parts without worrying about them working their way under the dividers included with the storage system. Step files included for…
Part of learning CAD, decided to model up a 16 x 16 MILS template. I have not converted my city to MILS, but may do in future. Prints should be under 150grams, which is way cheaper than the going rate for bulk bricks to waste underneath…
The IKEA "MILSBO" display cabinet is a popular solution for displaying plants and treasured objects. I use mine for my LEGO collection! These STLs are replacement parts for the shelf brackets which hold up the shelves in the MILSBO…
Classic untextured Hoffman Tactical grip 3.1 with a simple beavertail mod. Fits all AR grip mounts that are Milspec. Requires supports on the beaver tail and some sanding. Fuzzy skin settings; thickness 0.1, point distance 0.5.
“Milspec” Bug A Salt 3.0 Stock Adapter In the pursuit of owning the ultimate tactical bug exterminator, I was in search of a robust, tight-fitting stock adapter for the Bug A Salt 3.0 that didn't require tapping screws into the body or…
UPDATES: 19/09/2026 Updates pushers, now slimmer to help them stop striking the dart lever. 11/09/2026 New Dart Guides, 2 options created, one with a dart detector switch, another without. Gives way more reliable readings compared to the…
Akro-Mils makes plastic cabinets with plastic drawers for small parts. Each drawer has slots for one drawer divider. The typical cabinet comes with 64 small drawers, but only 8 dividers. The dividers are molded into the back of the…
Another pegboard-focused design for my workshop. I've got multiple Akro-Mil bins on my workbench with electronics and 3D print parts - this allows you to mount them directly to a 1/4" pegboard. Category: Organization
This model is compatible with the lego system.
I recently purchased an Akro-Mills 10124 parts cabinet and immediately printed off some of the replacement dividers , but found I wanted to be able to put smaller pieces in, and at the same time stack them up. While there were plenty of…
Akro-Mils 20701 Bin: Fits in 10726, 10164, and 10144 units. One of mine got stepped on and broken, so I came up with this 'lil guy. This model is designed to be used with vase mode and should be a drop-in replacement except that they…
Long Divider for the Akro Mils plastic storage bins. Modified the original design of the smaller divider to work with the larger bins. (See photo)
I was thrilled to find the model that these are a derivative of- a large part of why I got a 3D printer initially was to print custom LEGO pieces that didn't come in colors I wanted, so being able to use it to print MILS plates to make my…
Standard large and small drawer dividers for Akro-Mills plastic cabinets. These are direct replacements for Akro-Mils part #s 40716 and 40717. Fits any of these current models…
This is a drop in replacement for your MILSBO displaay cabinet if you want it to sit flat on the floor or on a different raiser/furniture. I designed it do be easier to print in terms of supports, as one side (bottom) is completely flat.…
These are made for the Ikea Milsbo Cabinet. I used a transparent PETG on a Bambu A1.
This is a remix of boltsnap's replacement Ikea Milsbo corner mount for flat screws. It has been beefed up and extended a bit. I've added the counterbore found on the original OEM part as well so it fits more snugly with the cabinet's…
This is a library of small part organizer drawer replacements that have permanent dividers to create multiple bins in one drawer. The many available removable divider systems for this are great, but when working with tiny parts (e.g. M2…
Fits Akro-Mils small plastic drawers, which can be found on a variety of Akro-Mils Plastic Bin Cabinets (i.e. 64 drawer, 48 drawer, etc.). Tray (vs. printed and/or stock dividers) prevents small parts from slipping underneath the…
Bavaria PETG Filament temp 230 C° bed 80C° infill 25%
These two bin dividers are derived from the project by StvPtrsn. The intent was to make divider bins that stacked in a way that allowed 12 sets of through hole resistors to be organized within a single Akro-Mils small bin. I customized…
For years, I've needed one replacement bin for my Akro-Mils 10726 parts organizer. I came up with this replica of the original bin and it worked great on the first attempt and fits my 10726, my 10164 and my 10144 units. The bin seemed…
I have printed these with multiple colors in PLA by manually changing filament at the first layer of text. I have tested 2 sizes: Little (for 30-210 and 30-220) and Big (for 30-230 and 30-235) These will probably fit other bins as well. I…
Piezas de soporte para las baldas de cristal de la estantería modelo MILSBO (IKEA)
Replacement mounting brackets for the Ikea Milsbo cabinet. Two different versions for each, one closely resembling original and another with a slight chamfer to support beveled head screws. Print models on their head to avoid supports The…
A magazine adapter for feednecks, to use TIPX magazines! No supports needed. Uses 2 3mm x 10mm compression springs. I used these (amazon affiliate link, I earn from qualifying purchases): https://amzn.to/3MAKW7J Also needs a 3mmx35mm…
Maybe you don't want to invest so much money in foundation plates, which can be quite expensibe. Those “ MILS plates ” keep the whole modular building set nicely stable and with these plates you can update your city layout easily. (More…
This model is compatible with the lego system.
Corner and center ziptie mounts for the Ikea Milsbo cabinet. I tried to design as close to the original shelf bracket design to ensure that the new parts could still work to support the glass shelves and provided the same offset for a…
24/1/2024: Alternate selector wheel added 1/12/2023: LowerFront is a depreciated version with a slot for rev trigger, have updated it with the current version which deletes it 28/11/2023: Forgot to upload the mag guide file, have uploaded…
These are drawer dividers that fit Akro-Mils. There are many other great designs already but I needed something that fit snugly and conformed to the shape of the drawer so nothing could slip under the dividers. I Have 5 different sizes so…
These drawer inserts allow you to keep different items in the same drawer without them mixing together. For example, I have M4x12 screws in SHCS and FHCS variations. These separators allow me to easily keep both styles of M4 screws in the…
Derived from Stewart Clelland's stacking dividers which were derived from StvPtrsn's dividers- they did the hard parts, Im just making a few more variations :) Notice that for some there are longways and shortways orientations! longways…
slide-on cover for a 500g quark from Aldi South (Milsani) Printed in PLA and PETG without any brim or supports
I made this because I needed a neat place to store my tips, so I figured I'd put them in my heat set insert bin so they're always ready to use! The tips I use are these: https://a.co/d/ckWd5pk They should fit any soldering tip that has an…
Akro-Mils Storage Bin Accessories I couldn't find anything I really liked due to shape or what I felt was excessive print times, so I created something that is functional, relatively fast printing and uses a small amount of filament.…
Hardware List (BOM): Qty (2) M5 x 12mm BOLTS, Qty (2) M5 x 16mm BOLTS, Qty (2) M5 x 20mm BOLTS, and Qty (2) M6 x 19mm SPRINGS I personally used button-head hex fasteners; countersink is 10mm diameter, so other head styles can be used.…
This is an adapter for the end of an AKRO-MILS 12901G watering can for delicate seed sprinkling. It helps preserve seed placement in sprouting/germination trays and avoids causing damage to new sprouts. Press fits onto the end with a nice…
Magfed Emek or Etha2!!! Supports needed for the eye cover area, part of the nose, and the mag well. Print at 6-7 walls, and as many bottom layers as you can manage. Uses 2 3mm x 10mm compression springs. I used these (amazon affiliate…
These bins are handy for all aspects of reloading. I use them for bullet bins as well as parts storage when servicing the machine. They fit on the press mount, casefeeder mount and wall mounts. These mounts fit tight to the profile and…
This is a remix of the Bin Dividers for Akro-Mils Small Parts Organizers by Steve with an added label and small scoop to each compartment. I printed these with 3 perimeters, 3 top and bottom layers, and 15% infill at 0.28mm layer height…
Ikea Milsbo shelf support (corner) which double functions as attachment to the supergreenlab LED holder The model is designed to work in combination of the original shelf supports of IKEA - 10003241 (white) - 10003245 (black) The complete…
Building upon the original design, utilizing a slightly more ergo cheek weld (extended and rounded on either side, similar in style to a B5 systems) with an (optional) added locking lever, designed to be printed separately and utilize a…
I had good success printing these (and other gridfinity parts) with 0.2mm layer height, 0.6mm nozzle, and outside parameters first (outside to inside)
Some of the other drawer dividers didn't quite fit my drawers, so here is another option.* sections divider for the small/long akro-mils drawer. Print Settings Printer Brand: RepRap Printer: RepRap Kossel Rafts: No Supports: No…
Trays for Akro-Mils small drawers. File naming convention: (3x2)ST(R) - 3 colums x 2 rows short for drawer top (rotated) (fits through hole resistors/diodes) 2TB - 2 Rows (T)all for drawer (B)ottom 10ST - 10 Rows (S)hort for drawer (T)op…
eSUn ABS infill 25% temp 250C° bed 100C°
Stormtrooped handles for Ikea Milsbo cabinet. Press fit on original handles. Print whith no supports.
A small Akro Mils drawer divider modeled after the original dividers that come on the back of the storage unit. Category: Organization
I disliked the factory drawers that came with the Akro-Mils 10116 organizer, but I liked the shell, so I decided to make my own drawers that fit my needs. Can fit up to 50mm M3 screws. Printing Instructions: PLA 15% infill I will continue…
Drumstick holder for Ikea Milsbo cabinet Remixed from : https://www.thingiverse.com/thing:3703309 and https://www.thingiverse.com/thing:440988 Category: Music
Bracket to hold diagonal shelves in the tall milsbo
🥣 Milsani Skyr Cup Lid – Simple & Practical A simple and easy-to-print lid for the Milsani Skyr cup to keep your Skyr fresh and prevent it from drying out in the fridge. Designed specifically for the 500 g Milsani Skyr cup from Aldi .…
Full disclosure, this is not a great idea. It makes using the CO2 adapter difficult, there is nothing preventing this from rotating, and getting the fit just right is important. That being said, You have all my files so mod to make it…
Dividing partition for Akro-Mils AkroBins part number 30-220
Better Organize your Akro-Mils 10144 44-Drawer Storage Cabinet. Allows you to have more parts in the Bin.…
Remix of @Steve_9363's Bin Dividers for 10 division, 5 division and a 4 division variants; for Akro-Mils 10144 or 10164
Trays with sliding lids to securely hold SMD components (50 x 0805, 20 x 1206 in each compartment). 1 small AKRO-MILS drawer can hold 2 long (E12 x 6) and 4 short (E6 x 6) trays. Snug fitting lid: Components will not spill into other…
This is a printable drawer divider for the small drawers on the Akro-Mils 10164 Storage Cabinet.
This was made in like 15 minutes in photoshop then exported to tinkercad. I've tested it with Frontline Foam's and Spectre's M79 barrel adapters with Monkee mods threaded jet blaster barrels, and both work fine. I intentionally made the…
When you build a Voron (or buy/build any large/fast printer), you may find yourself needing to order larger quantities of filament on bigger spools than you did previously. I needed to use a 3kg spool of ABS from Polymaker on my 2.4, and…
Preliminary model of the magwell for the BPX which allows the use of Milsig type magazines including Square and Hybrid mags.
Mount for a 40mm fan using the existing mount holes in the cabinet.
Dieser Schiebedeckel wurde passgenau für die Milsani Frischkäsepackung (Aldi-Süd) entwickelt. Er wird seitlich auf den Rand der Verpackung geschoben und verschließt den Behälter, sodass angebrochener Frischkäse länger frisch bleibt und…
Simple replacement clasp for Akro-Mils multi-compartment tool storage. I've had two of these for years and years. Lost one of the clasps some time ago and the rest are just getting worn down, so time for new ones. I toyed around quite a…
I grabbed some wire closet shelves from Home Depot (they will cut them for you too!) to make an Ikea Milsbo Greenhouse Cabinet. I printed it in ASA with 0.4mm nozzle with a 0.2mm layer height and it has held up great. M4x12mm screws…
Print it with the top of the cap facing the bed. The fit in the holes of the cabinet is very tight.
Hopper bung / side breech cover for the Valken CQMF, may also fit the M5 from Milsig, but I dont have one to check. Category: Sport & Outdoors
Ball detent for Valken and Milsig M17 M5 and CQMF markers Print in flexible TPU, simples. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament: Any - its all the same TPU…
Just some small inserts for the Akro-Mils small drawers so you could have more parts. The dividers that can with it are not good for really small parts.
I print these 4 at a time, sequentially (by Object). If it works for you, please Like and post a Make with photo for others to see.
Sling plate with milspec size. Fits milspec buffer tubes. Perfect fit magpul back plate. Fits Wolverine MTW.
I recently bought the set of three organization drawers from Amazon made by Akro-Mils, which have a total of 96 small drawers and 36 large drawers. They include drawer dividers molded into the back of the units, but removing them seems…
This organizer is designed to hold up to 15 CR2032 batteries with easy access to all of them. I don't know why you need 15 CR2032 batteries, but now they are organized and held neatly.
Top pic rail for the Milsig M17 marker. I originally put holes in for the retention pins but ended up drilling these after instead as it was difficult to get good alignment, also the holes on my receiver were on their last legs so I glued…
Breech cover for the M17, pretty much a direct copy of the original, as best as I can in Tinkercad in any case. Should print without supports at 0.15mm or less layer height. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts:…
Needed some dividers for my akro-mils bins so I whipped some up quick in fusion, and thought I'd share in case I can save the time for someone else. Added a flared base both for bed adhesion, and to make it easier to grab small parts.
Simple to print 4 Sections Divider for the Akro-Mils Plastic Drawer Storage Cabinet. Please use supports You can find my file here on marker world: https://makerworld.com/en/models/575547#profileId-495967
This is a remix of the DDR3/4 storage box to fit the width of an Akro-Mils drawer with tabs to fit into the divider slot so it doesn't move around when opening and closing.
This is a curtain for Ikea Milsbo to not get blind from the led inside. Unfortunetly it is 29,5cm long so you need a bigger bed to print it. Got only 4 layers 0,8mm thick, to make sure it is dense enough.
Remix of https://www.thingiverse.com/thing:5350352 since I had some issues with it. I'm currently running it in my M6 Carbine with good results Changes Tightened C-clip spacing Added printed holes for pins I still recommend drilling these…
This is a simple latch slot extension for the IKEA Milsbo cabinet. It is intended to be used as a “secure” method of propping open the door for ventilation of a greenhouse conversion project. The Milsbo is excellent for greenhouse…
I bought an akro-mils drawer for small parts and was dissapointed with the lack of separators, as there simply weren't enough of them. This seems to fit perfectly Cabinet in question:…
This is a barrel nut replacement, not to connect a handguard, but to replace the threaded hex nut connectors where they have been lost, this joins two 10mm M5 button head nuts in the middle - i.e. the connectors that go through the marker…
These are drawer dividers for Akro-Mils storage units (also Uline H-5578 and H-5579). There are variations to split a small drawer into 2 to 5 partitions, and a larger drawer into 2 to 10 partitions. The SolidWorks files and STEP files…
Collar that surrounds the squarehead for Milsig and Valken magazines, print in fine resolution ideally as the lip that positions the squarehead properly needs as much integrity as possible. Print Settings Printer Brand: Creality Printer:…
This organizer is designed to hold up to 21 LR44/SR44/357/303/AG13 batteries with easy access to all of them.
Self-aligning Gridfinity 2 X 3 drawer liners for Akro-Mils 24-Drawer Plastic Drawer Storage Cabinet - 20" W x 6" D x 16" H, 10124 Black Drawer measurements Product listing: Organizer drawer external dimensions - 6" x 4-1/2" x 2-3/16" The…
These are Akro Mils drawer dividers for their metal storage cabinets. The Fusion models are parametric. There are two models, one that has notched cutouts in the bottom corners, and one that does not. I did not attempt to fully replicate…
A spacer to adapt a Milspec stock, this one specifically , to the EMEK EMF100 PWR stock. Could potentially work with others?
i designed this for a friend and he never use it, so i dont know if its work fine because i dont have a m17. maibe i buy a m17 in the next mont... or not xd
Better Organize your Akro-Mils 10144 44-Drawer Storage Cabinet. Allows you to have more parts in the Bin.…
UPDATES: 28/07/2026 New flywheel cage! This now consists of one printed part, and 2 metal plates to mount the motor. Plate .step file included, can be cut via JLCCNC or sendcutsend. Removed sub250 1304 motors as an option and replaced…
I bought an akro-mils drawer for small parts and was dissapointed with the lack of separators, as there simply weren't enough of them. This seems to fit perfectly Cabinet in question:…
This is a remix of the DDR3/4 storage box to fit the width of an Akro-Mils drawer with tabs to fit into the divider slot so it doesn't move around when opening and closing.
This is a M.2 2280 storage box designed to fit the width of an Akro-Mils drawer with tabs to fit into the divider slot so it doesn't move around when opening and closing.
This is a remix of the "resistor" variant of the Akro Mils large drawer trays. The original model offers 16 dividers, but I wanted 8 for my application. So I removed alternating walls to yield 8 dividers per tray. I was able to use…
Remix of https://www.thingiverse.com/thing:5350352 since I had some issues with it. I'm currently running it in my M6 Carbine with good results Changes Tightened C-clip spacing Added printed holes for pins I still recommend drilling these…
