130 modeli
Friend Asked for a Tool stand for RC wrenches. This will hold all sizes of MIP tools. 4 of larger orange or Black handle wrenches. 3 of the smaller handled wrenches and 2 medium ones( newer ball drivers). 3 Turnbuckle wrenches,Sharpie or…
Reasonably dimensionally accurate concentric brightness knobs. To be honest, this design pushes the limits for a 0.4mm nozzle and would ideally be printed with a 0.2mm, but as the pictues show you can just about get away with 0.4mm. The…
This is a NexGenSim 3D printable A320 MIP Frame Captain Side Panel. It is provided free of charge for you to 3D print it yourself. It is a highly accurate representation of the real A320 ceo panel, scale 1:1
This is a NexGenSim 3D printable A320 MIP Frame EICAS panel. It is provided free of charge for you to 3D print it yourself. It is a highly accurate representation of the real A320 ceo panel, scale 1:1.
Kingroon KP3S Printed with 0.4 nozzle, layers 0.2mm, 100% infill. Filament PLA BASICO fron Ctrol 3D in several colours. Yellow thick 2mm, black 1mm and white 0.8mm. Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%.…
This is a replacement cap / front piece / bracket for a broken eQ-3 Homematic IP Evo (HmIP-eTRV-E) Thermostat. The front cap has broken off on two of my thermostats, which happens quite easily by accidentally bumping into the thermostat,…
A pony, lying on the ground. She has no hair nor tail, but you can for example glue on yarn. Based on the drawing by xbi: https://www.deviantart.com/xbi/art/Pony-Entertainment-System-PES-788524638 Print instructions Rafts: Yes Supports:…
This is my remix of the @Pepe LePew remixed stand. Please note: My skills are very limited and this could probably have been done better but since I couldn't find what I wanted, I did it myself. This remix turns the stand into a deluxe…
This is a easy to print case / enclosure for a Homematic HmIP-PCBS board that can be used as a repeater / range extender for a Homematic IP network. This box is tiny. I used a small piece of double sided tape to glue it to the wall where…
Case for Homematic "HmIP-PCBS" board
As there's no DIN-Rail actuator available which support power measurement, HMIP-DRSI1 is far too expensive for its little set of features and there's also no single channel shutter actuator, I needed to use the flush-mounted actuators in…
Das sind STL Dateien zur Fernbedienung aus dem Homematic Programm. Beide Varianten, teilweise mit Text... Muss man sehen was für einen passt.. ❤Lasst gerne ein Like da ! Da freut sich der Bastler!✌😉 Jeweils mit 2 Befestigungslöcher 4mm an…
Purchased the Fysetc DSI display as it was much cheaper than the BTT one but found that it's a much slimmer display with the ribbon cable in the middle instead. Remixed to make it work for the Fysetc 5" DSI display. Update : Added a…
Holds MiP drivers and a 3'' harbor freight magnetic tray
Cover for the HmIP-DSD-PCB module. Fits very tightly. Be careful. Category: Electronics
🦕 Dino Delight Front Cover: Unleash Jurassic Joy on Your Piggy Bank! Turn your 3D-Printable Alphabet Piggy Bank into a dino wonderland with our whimsical Dino Delight Front Cover! 🌋🦖 This STL file, available for download, seamlessly…
I made it to fit next to the Philips Hue Rack Mount by 3DPasha. ( https://www.thingiverse.com/thing:5386580 ) You can screw his Mount and mine together. Print Settings Printer Brand: Creality Printer: Ender 3 S1 Rafts: No Supports: No…
Designed around several specific parts. See image for specifics
Case for HmIP-PCBS2 actor from HomematicIP with relais board installed. Easy to print, no supports needed. You might need to press the clip for the board in with your finger before it moves freely and you can clip in the PCB. One version…
🦄 Unicorn Rainbow Bliss Front Cover: Infuse Magical Joy into Your Piggy Bank! Transform your 3D-Printable Alphabet Piggy Bank into a whimsical wonder with our enchanting Unicorn Rainbow Bliss Front Cover! 🌈🦄 This downloadable STL file…
All parts prints without support. In 0.2mm Layer hight. There are different Versions of the lid: HmIP-USBSM_Box_TOP: LEDs are hidden. HmIP-USBSM_Box_TOP_LEDTube: Includes Tubes for the LEDs HmIP-USBSM_Box_TOP_LED3mm: Includes 3mm Holes…
Hergestellt aus PC, Achtung der Schließzylinder sollte ca. 4,5mm hervorstehen, damit der mitgelieferte Kunststoffadapter in schwarz gezeichnet daran festgeklemmt werden kann. Der zylindrische Stummel unter dem Türdrehknauf, der zu sehen…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl changelog: 29.10.2026 - added NEW insert-parts with different tolerances -…
This piece was made to fit a unique situation where the elbow fitting was protruding through the wall (pictured), The flange has a 7/16" recess to accommodate this. There are two versions included, a threaded version which fits 1/2"…
Deutsch Für den "Homematic IP Funk-Temperatur- und Luftfeuchtigkeitssensor" HmIP-STHO bzw. HmIP-STHO-A habe ich dieses kleine Modell konstruiert um es außen am Fensterbrett in die Wasser-Ablaufrinne einzuklemmen. Der Keil (wird unten…
Please go learn more about the MMIW/MMIP movement. Not only do I have some learning material at https://linktr.ee/nbiish but you should also do your own research. Thank you for being an ally to First Nations Peoples and helping raise…
Danke für Interesse! Mein erstes ausgestelltes Modell :) Passt als Gehäuse für Homematic Temperatursensor HmIP-STE2-PCB ARR-Bausatz.
Hier findet Ihr ein Modell der Gummipuffer für die Seitendeckel einer Vespa PK50XL aus dem Jahre 1989. Sicherlich passt diese auch bei anderen Modellen. Gedruckt habe ich die Puffer in TPU-95A im Profil 0,2Structural ohne Stützmaterial.…
I needed a 360° nozzle for our HUMIPRO home humidifier Please give a HEART for the download! We like to collect them. ;-) PRINT SETTINGS: Total time → 1 Hour Number of print files → 1 Layer height → 0,2 Layer width → 0,45 Perimeters → 3…
This is a replacement part for the Homematic IP HmIP-DLD door lock drive. The rotary knob on my drive broke off, and I had to find a replacement. Printed with 3 Perimeters, 20 % Infill, 0.2 mm Layer height and ramdom seem.
[German] Dies ist eine Halterung für die Kontaktschnittstelle HMIP-FCI1 von Homematic IP. Die Halterung kann mit einem Taster unter dem Tisch befestigt werden. Die Kabel von der Kontaktschnittstelle müssen nicht gekürzt werden und können…
This is an original design. It's a little touch, but it's noticeable in flight
Simple and fast to print mount for homematic IP Access Point suitable for IKEA Skadis punchwall. You can easily hang the holder in the Skadis wall and attach the HMIP AP with its mounting holes / drill holes. I printed on a high…
UHF holder (diameter 13mm + D12)
Modified the original model to have bigger wall mount and to have less parts. Consists of two parts only - the mount and the cover that slides into the mount. Just place the mount, put the sensor inside and slide the cover. The cover does…
HMIP-SLO Holder with angle to fix with wood screws. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Fast Filament: nunus PETG white Category: Outdoor & Garden
Parts Tray With MIP Tool hold with a side cover to store the MIP hex bits
This compact geometric fidget toy is designed to be fun, satisfying, and addictive to play with. The layered spiral design creates a smooth tactile feel and produces a pleasant clicking sound while interacting with it noticeable enough to…
Hello, Here I propose my holder for the MipBip from Mipfly Can be assembled on risers of 2.2mm thickness, maximum 30mm width. I recommend to print in PETG BOM: - x4 M3x10 socket head screws - x4 M3 nuts (Normally, if you have a Prusa, you…
HMIP-SLO Holder to attach to the gutter with a cable tie. Diameter 76mm Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Fast Filament: nunus PETG white Category: Outdoor & Garden
Diagonal Dimension : 2.76 inch Resolution : 480RGB x 480 pixel View Direction : - Touch Mode : None Module Dimension : 76.48(H) x 73.03(W) x 2.34(T) mm Viewing Area : 70.13 x 70.13 mm Supply Voltage : 2.8 V Interface : MIPI, RGB Luminance…
Gummipuffer Führungsschieber Ulmia Gehrungssäge 348, 352 & 354 Rubber Buffer Druckmaterial: -TPU
Alternative cover designed for HomematicIP HMIP-SWDO-A motion sensor. The models either fit a - PoleMount for ~42.5mm pole with cable ties - Single M8 Screw (to mount to “PKS M8/10-40 E5” clamp) - Just the cover (e.g. as repair part)
Please go learn more about the MMIW/MMIP movement. Not only do I have some learning material at https://linktr.ee/nbiish but you should also do your own research. Thank you for being an ally to First Nations Peoples and helping raise…
Rallonge qui remplace l'embout d'origine en caoutchouc, facilite l'accès au frein du côté opposé (frein gauche avec la main droite et inversement). Imprimé en PETG remplissage 50%
The Machine Gummipuffer, am besten in TPU drucken zwecks Elastizität
Dummy für Fenstersensor. So kann schnell und einfach geprüft werden, ob dieser ins Fenster oder die Tür passt.
HMIP-SLO Holder to slide the sensor under at the dormer on a slate plate. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Fast Filament: nunus PETG White Category: Outdoor & Garden
Please go learn more about the MMIW/MMIP movement. Not only do I have some learning material at https://linktr.ee/nbiish but you should also do your own research. Thank you for being an ally to First Nations Peoples and helping raise…
Rack mount brackets for the MiPro ATC-312B each can be 3d printed on any printer similar too ender 3 in one go. No need for chopping up and threaded inserts. Antennas will need to be rerouted with a antenna panel and 2 external TNC…
use a homematic optical sensor to determine if garage door is closed. mounts the sensor on top of upper segment to allow free movement. needs reflection folie on frame, if not the distance is too large. Check your setup, it might differ…
Mein Gehäuse für einen HmIP-STE2-PCB Temperatur-Differenz-Sensor. Die Platine wird innerhalb des Gehäuses mit einer (oder zwei) M3x8 Schraube fixiert. Der Gehäusedeckel wird mit zwei M4x12 Senkkopfschrauben festgeschraubt. Die Laschen…
Flexibles Gummiprofil für Schellen / Flex Clamping Rubber Band( / Anpassbares / Customizable OpenSCAD- Script → 0.4 Nozzle → 0.3mm Layer Height, → 50% infill, → TPU → No support
Tested with Nanlite Lumipad 25 and Velbon EX-530, but the same quick-release plate (QB-46) should work on other Velbon tripods, and the Lumipad half might work for other models. Printed with PETG using slightly higher infill (30%), seems…
Diagonal Dimension : 3.4 inch Resolution : 800RGB x 800 pixel View Direction : All Touch Mode : None Module Dimension : 96.95(H) x 94.9(W) x 2.3(T) mm Viewing Area : 87.6 x 87.6 mm Supply Voltage : 2.8 V Interface : MIPI Luminance : 350…
Just slice off the QR to add your own and search for "qr code to stl" to get one to add to the handprint.
Ich habe eine Halterung für einen Homematic HmIP-PCBS2 Aktor in einem Sommer Antriebe Schaltkasten gezeichnet und gedruckt. Mit dem Modul kann über ein Handy oder andere Homematic Taster usw. das Hoftor geöffnet werden. Die Halterung…
Der beim HmIP Wettersensor basic mitgelieferte Kunststoff-Rohrverbinder ist, gelinde gesagt, “windig” konstruiert und hat sich in der Folge bei mir im Winter bei leichten Minus-Graden mit einem Sprödbruch verabschiedet, als mein…
Everyone appreciates your support!
Standfuß für Homematic Wetterstation HmIP-SWO-B
Diagonal Dimension : 3.4 inch Resolution : 800x800 pixel View Direction : FREE Touch Mode : None Module Dimension : 99.0(H)x96.6(V)x3.98(D) mm Viewing Area : 87.6(H)x87.6(V) mm Supply Voltage : 1.8 V Interface : MIPI 3lane Luminance : 350…
Kopie držáku klopového mikrofonu ke klipsně. Originál se mi zlomil. Pokud se vám model líbí, budu rád za váš like. If you like the model, I would be happy for your like.
Table top organize for my most used Rc bits and driver. Designed for MIP bits but will work with others. used the slicer settings to change the colours of the rigs around the bits.
Gummipuffer für Hocker / Trittstufe der Fa. Brunner
Everyone appreciates your support in raising awareness! QR goes to https://linktr.ee/mmip.stamp 🚨
Print these however you like. I did ABS with four walls top and bottom 40% infill. There is a set of four handles with numerical labels and a set of two handles with a L and S label
La cama viene con la electrónica descubierta y con esta tapa se corrige Print Settings Printer: Artillery Genius Rafts: No Supports: Yes Resolution: 0,15 Filament: Sumlu PETG Category: Hobby
Alternative cover designed for HomematicIP HmIP-SCI contact interface There are two models uploaded - Just the cover (e.g. as repair part) - Cover with side outlet for cable connection I additionally uploaded the .step file so you can…
The translucent body of the Lumipets night lights is ideal for diffusing light in your speedlight photography. The fun shapes and animals have the additional advantage of bringing smiles to your subjects' faces. This adapter fits the…
Printed in PLA, with 50% infill, in horizontal orientation (so the shear lines aren't between the mount and the light).
This is an alternative button cover for the HDMIPI. You can find more info on HDMIPI at http://hdmipi.com/ The Bridges are now thicker in V1.02 Instructions These were sliced with Simplify3D but other slicers should be fine. I recommend…
The design is simple, lightweight, and installs without any additional hardware. All parts are designed to snap together, and the HmIP-KRCK can then be inserted directly into the holder. Print Settings Material: ABS or ASA (recommended)…
Diagonal Dimension : 1.39 inch Resolution : 400 x 400 pixel Display Color : 16.7M(Maximum) Touch Mode : None Module/Panel Dimension : 38.6 x 40.5 x 0.7 mm Viewing Area : 35.4 x 35.4 mm Supply Voltage : 1.8 V Luminance : 300 cd/m2…
I designed this model to magnetically mount my HmIP-ESI to the ferromagnetic surface of the home electric panel. I use NdFeB magnets with 10mm x 2mm, you could use a bit stronger magnets, though. I added another version for 10mm x 3mm…
Although the print is a square shape, and the actual panel on a320 is not, you can place the panel behind a cutout to give it the shape, (see pictures).
Diagonal Dimension : 5.0 inch Resolution : 1080x1080 pixel View Direction : - Touch Mode : None Module Dimension : 136.531(H)x132.208(V)x1.98(D) mm Viewing Area : 127.008(H)x127.008(V) mm Supply Voltage : 1.8 V Interface : 1/2/3/4-LANE…
Diagonal Dimension : 1.39 inch Resolution : 454 × 454 pixel Display Color : - Touch Mode : None Module/Panel Dimension : 40.3 x 41.8 x 2.45 mm Viewing Area : 35.41 x 35.41 mm Supply Voltage : 3.3 V Luminance : 430 cd/m2 Interface : MIPI-1…
This 3D model is a custom wall bracket designed to hold the portable MiPro Sense thermostat by Saunier Duval. It allows you to mount the thermostat securely and stylishly on a wall, while keeping it easily accessible and readable.
Diagonal Dimension : 2.47 inch Resolution : 480 x 480 pixel View Direction : U/D/L/R free viewing direction Touch Mode : None Module Dimension : 66.64(H) X 70.14(V) mm Viewing Area : 62.64 × 62.64(circle) mm Supply Voltage : - Interface :…
Diagonal Dimension : 3.34 inch Resolution : 320RGB x 320 pixel View Direction : 12 o'clock Touch Mode : None Module Dimension : 69.3(H) x 66.2(W) x 2.66(T) mm Viewing Area :60 x 60 mm Supply Voltage : 2.8 V Interface : MIPI Luminance :…
Diagonal Dimension : 1.39 inch Resolution : 454RGB x 454 pixel View Direction : All Touch Mode : Capacitive Module Dimension : 42H) x 42.6(W) x 2.227(D) mm Viewing Area :35.41 x 35.41 mm Supply Voltage : 3.3 V Interface : MIPI, SPI…
Diagonal Dimension : 1.4 inch Resolution : 454RGB x 454 pixel View Direction : All Touch Mode : None Module Dimension : 38.46(H) x 38.62(W) x 0.78(T) mm Viewing Area : 38.46 x 38.62 mm Supply Voltage : 4.6 V Interface : MIPI, SPI…
Ein einfach zu druckendes Gehäuse für ein HmIP-PCBS. Keine supports nötig (den Deckel auf dem Kopf stehend drucken). Zur Zugentlastung werden die Kabel mittels Kabelbindern festgezurrt. Der Deckel mit mit 2x M4x12 Senkkopfschrauben an den…
The provided .3mf files already contain the settings I was using. If you're using the .stl ones, use the following settings: Magnet cover: (Orientation as is; closed on top, open on bottom) This part replaced the original one. Material:…
Diagonal Dimension : 1.20 inch Resolution : 390 x 390 pixel Display Color : Hyper R.G.B Touch Mode : None Module/Panel Dimension : 33.22 (H) × 34.72 (V) × 0.66(T) mm Viewing Area : 30.42 (H) × 30.42 (V) mm Supply Voltage : 1.8 V Luminance…
Diagonal Dimension : 1.20 inch Resolution : 390x390 pixel Display Color : 16.7 M Touch Mode : None Module/Panel Dimension : 33.22 (H) × 33.75 (V) × 0.656(T) mm Viewing Area : 30.42 (H)×30.42(V) mm Supply Voltage : 1.8 V Luminance : -…
Introducing the LumiPod, a compact and elegant earluge lamp that brings a touch of warmth and serenity to any space. Inspired by the soft curves of a foam earplug, the LumiPod combines minimalist design with functional illumination,…
adapted to be used with https://github.com/will127534/CSI-2-FourLane-HDMI-Extender allows 2x HDMI connection from the back side of the Pi. Screw holes adapted for M2.5 flat head. Two models, one with flush top and the other with increased…
Durch das Aufbohren der Platte für Weru Fenster ist mir die Halterplatte kaputtgegangen. Daraufhin habe ich anhang des Originalhalters ein Nachbau erstellt. Mit Stütze drucken. 0.2 mm PETG By drilling open the plate for Weru windows, the…
A forehead buckle type mount-plate for under-the-visor POV mainly for portrait capture. With the right angle, it helps to convey the steepness as close as perceived by the rider. For some footage samples you can see my other similarly…
Wandhalterung für HmIP -KRC4 KRCK KRCA KRC Fernbedienung Wall mount for HmIP -KRC4 KRCK KRCA KRC remote control
The mount has been adapted to accommodate the different dimensions and wiring requirements of the HMIP-FROLL. The design allows for two different WAGO terminal configurations: 2× WAGO 221-413 terminals or 2× WAGO 221-412 terminals with an…
This is the Mipclip, a Silly Shell carrying system designed to attach to the non-standard webbing spacing of the SCRD Tactical Belt, as well as options for standard MOLLE spacing. It's heavily based on the original RIPclip, but is…
Made for IPhone 16 but works with most sizes
Man muss während dem Druck anhalten und den Gummit einlegen.
Can be used to fixate a IoT device to a tree using a belt. Mounted a HmIP-STHO (HomeMaticIP Smart Home Temperatur- und Luftfeuchtigkeitssensor – außen). You will need some screws: assembling top and bottom: 2x M4x12 Countersunk screws…
I created this as part of my Cessna 172S MIP sim build. I disassembled a Honeycomb Alpha light to fit behind the MIP and extended the control rod (12mm dia) with a replacement from Amazon that was longer but had to make some rod…
![Argon Neo 5 Top Cover adapted for [MIPI to 4-lane CSI HDMI extension by Will Whang]](https://media.printables.com/media/prints/149aca6e-1acb-409f-bc57-3828ecbed2be/images/13012063_0c86629c-46ee-4dc3-845b-6a4a3a1dc3af_daaa5df0-9d87-4eda-893c-3a7a1d977ece/topcover-extra-height-1.jpg)
![[Homematic IP] Baum-Klemme / Tree clamp for HmIP-STHO](https://media.printables.com/media/prints/bf0f8f74-959a-4904-873c-ddd7047f2b4c/images/10237580_5fee7399-8bd4-4bf1-b4f1-a17fb3cf3481_37cb6313-5ec9-4f4f-99d3-71c3924a87d5/makes-01.jpg)
