Liczymy pasujące modele…
Schöner Stern der in verschiedenen Varianten verklebt werden kann. Es sind ebenfalls alle Größen dabei mit Loch um die Stern aufhängen zu können. Der Stern kann ohne Infill und Supports gedruckt werden. Durch das geringe Gewicht ist es…
Wydruk około 2,39 €–2,93 € nettoWstępna wycena jednego wariantu
deutsch weiter unten Uniform glue application for edges Simply apply glue to the edge and spread it with the spatula. The lateral border keeps the glue exactly where it should be. You can reduce the amount of glue by using a flatter angle…
Wydruk około 3,00 €–3,67 € nettoWstępna wycena jednego wariantu
Update 1-6-26 With the combinations of mats and sleeves and expansion, what to print is confusing. Here's a chart to help: Update 10-22-25 I have made new files that allow for storage of the Dragon academy cards, tokens and other…
Wyrmspan, a Wingspan game, takes the core elements of Wingspan and adapts them to a new theme for a familiar but fresh experience. This insert is primarily to assist with setup and teardown and includes a card market tray that can be…
UPDATES August 22, 2024 - NEW 2 Cent Euro I've had a couple of folks show some makes using the 2 cent euro where they had to scale the model a bit to get it working. I've updated my model to allow me to more easily add different coin…
This is my take on Wyrmspan resources. I wanted to resize the original pieces so they were all roughly the same size, but ended up remodeling most of them from scratch so I could adjust their shape as well. The gold bar is modeled after…
The filter is for the new paper filters with combined filter and return, please print the version with open lid. The filter can also be used for the older whirlpool types with separate filter and water inlet, but you will need the adapter…
Eine kleine Christbaumspitze (19 cm breit) in Sternform. Update 30.12.2022: Aufbewahrungsbox hinzugefügt. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0.2 mm Filament: GIANTARM PLA Silk…
Made a functional insert for wyrmspan that works with the deluxe tokens. Does not have space for card sleeves, I would have to redesign most of the insert to make it compatible with sleeves. I printed this one with 15% infill and…
The dragon coins feature dragon scales on one side and a dragon wing on the other. You decide which is heads and which is tails. They are perfect for upgrading cardboard tokens from games like Wyrmspan. I designed the coins in Fusion 360…
These Wyrmspan tokens can replace the various cardboard resources and cube markers that come with the game. One benefit is that you can just print more if you tend to run out of resources in those large-player games! Or, if you want…
Better than cardboard Wyrmspan Resources Wyrmspan is a 1-5 player game from Stonemaier Games where you build and explore a cavernous sanctuary for dragons, based partially on the popular game Wingspan. I have created 3d printable versions…
Print in as high of detail as you can.
The last time I played Wyrmspan with friends, we ran out of eggs near the end of the game and had to scramble to use substitutes. (I'm not good with the multiplier tokens) So I decided to create a simple 3d printable one similar to those…
Mspa lite inflatable bubble bath (spa whirlpool jacuzzi) filter holder for universal paper filters or filterballs
UPDATES Aug 22, 2024: Updated clip to be more stable. Shouldn't deform as much over time. Updated the font in the .3mf to ITC Benguiat Std Thanks for the suggestion @Velosiraptor_773686! 8.0mm height 50 pt char gap 300 pt boldness The…
I was inspired by loringczroby's beautiful work on his PackMan Boardgame, so I decided to make the Third level (my favorite) of MsPacMan with an appropriate size to fit my Ender-3 bed. This board will need 3 colors: black, wood brown and…
Das Modell besteht aus zwei Teilen: Schlauch-Adapter , um einen 32mm Schlauch an den Wasserabfluss des Whirlpools zu hängen. Ablauf-Stutzen , der im Pool in den Ablauf gesteckt wird, damit der Pfropfen den Ablauf nicht verschließt und das…
I use 100 micron premium sleeves on my cards and needed an insert that fit with that for this game. Since my first solution placed the cardboxes where the other insert has the player trays, I figured i should just design the rest myself…
This is the big brother of the star of my "Snowflake Christmas Tree", suitable for the real Christmas tree. The star with holding tube is 20 cm high, weighs about 50g (additional 12g for support) and took 2 1/4 hours on my "Neptune 4…
Kegel für eine 10mm Gewindestange z.B. zum umspulen von Filamentresten mit einem Akkuschrauber. Benötigt werden 2 Kegel (siehe Bilder) Schichthöhe: 0.24mm, PLA Infill: 25% Cubic je 4 Schichten (Wall, Top, Bottom) Durchmesser: ca. 52mm bis…
A bowl/nest for the egg tokens from Stonemaier's Wyrmspan board game. Inspired by basalt columns such as the Giant's Causeway in Northern Ireland. There is a small one designed to fit on smaller printers (mine was printed on a Voron V0)…
The MS3 does not mount to the stock ECU mounts on an NB Miata (mine's a '99). Recommend printing with: ABS filament Fill density=30%+ Perimeters=3+ With supports These originated from Risi_turbo's MS2 mounts from…
Ein Werkzeug um das Laden der Filmspule aus der Filmpatrone zu erleichtern. Nach ein paar Probeläufen des Originals wurden einige Änderungen vorgenommen. So läßt sich die Filmpatrone leichter einklippen und ist beweglich gelagert,…
for English, see below Intro Mein Präsziser Filamentumspuler war ursprünglich für meine Prusameter Spulen gedacht. Mit diesen zusätzlichen Teilen könnt ihr auch andere Spulen mit ca 32 Windungen pro Lage und einem Minimal Innendruchmesser…
These deluxe resources replace the card board resources in the original game. This remix makes the milk tokens into a single piece for ease of printing. In the picture with all of the resources in an organizer: This is the super cool…
I was using a model created by someone else until the release of the expansion. The additional cards and board make it significantly more difficult to get the box to fit together just right. I couldn't find anything that was exactly what…
New Versions : with holes to easily push out cards from the back with and without risers to make it easier to pick up the cards I created this model based on a suggestion/desire expressed on facebook. The card holder is designed replace…
Inlays & Boxes for Wyrmspan --- Please give me a "like" when you download it --- If you have finished prints, please post a photo --- Everything fits in the original box and is also suitable for cards in sleeves. Look at the pictures,…
These are some trays we've been using for Wyrmspan. They have the following features: Stackable (with snap fit) for storage. Sized to fit within the original box alongside the player mats. Can store up to 4 personal trays in the box,…
Profiles 0.2mm Speed and Gereric PLA are unmodified, just like they come from the slicer . PrusaSlicer Version ist shown in the pic section, as a screenshot. Greetings to the world !
This is a remix of an excellent existing insert to add support for the new components added in the Dragon Academy expansion. Most of the components have been remodeled but they're still heavily based on the original upload. Unfortunately…
This is a Wall mount for Arkenstone replica "The Heart" by Dreamspheres (a replica from The Hobbit / The Lord of the Rings) http://dreamspheres.co.uk/the%20heart.html It incorporates a spot to include a Puck light I found on Amazon to…
EN: Insert for Wyrmspan + Dragon Academy with sleeved cards (sleeves for cave cards were cut - 58 mm in hieght). I added some filling parts to set perfectly in the box (simple boxes, placed mostly upside down). You will need some parts in…
Please remember that the support structure must only extend from the printing plate, as otherwise the spring hooks will not function. Bitte daran denken, dass die Supportstruktur nur von der Druckplatte ausgehen darf, da die federnden…
Die Schrift passt perfekt in das Schild und wird darin eingeklebt.
Dekoratives Schild für die Carrerabahn
Dekoratives Schild! Bremspunkt
This is a 3D printed action selection coin that is weighted with a penny inside. It replaces the cardboard coins from the game. I remixed this so that it would fit in the super cool organizer I had already printed. I had decided to use…
I grew tired of expensive water bottles that would get stopped up or drip everywhere. After looking at a dog bowl that used a 2L bottle, I thought I could do the same for our hamster. This two piece water bottle will mount on a wire frame…
龙翼翱翔的收纳，支持20丝牌套 打印 3个 龙卡盒子（01）和 5个 玩家盒（05） —————— Wyrmspan Insert, Supports 20 Silk Card Set Print 3 dragon card boxes (01) and 5 player boxes (05) —————— 图上3d打印token来自（The 3D printing token on the image comes from）：…
I have printed this with petg. seems to work ok, but would probably be better in abs or asa
Eine Weihnachtsbaumspitze. Einstellungen habe ich wie folgt vorgenommen: Für die Spitze: 0.15 Layerhight --> 2 Konturen --> 0 Boden --> 6 Decke Für die Kugel: Vasemodus Für die Spirale: 0.15 Layerhight --> 6 Konturen --> 6 Boden --> 6…
A set of tip-proof organizers for the game Wyrmspan. The prints are designed to nicely organize all of the materials from the base game, with space left over to be used for presumed future expansions. The leftover space is designed to…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Update 20261004: Changing the latch of the folding stock to spring up instead of down to prevent dislodging when priming Also edit BOM and instructions to use M3x14mm…
My friends Wyrmspan meeple got snapped in half by his dog. I don't have the game myself but I took a picture and modeled it in Fusion 360. The size likely isn't exact because I don't have the game to test. But feel free to resize and…
Lost you tow point cover? Me to Never actually got one with my msport bumpers and SE does not fit at all Couldn't be bothered with overpaying in dealership or paying for model I made one myself Took a lot of prototypes and it's not ideal…
Es wird noch im Mai eine neue Version des Filament Umspulers geben. In dieser VErsion ist der Motor und die Sensoren integriert. Das ganze wird sehr viel kompakter sein. https://www.wendelgass.com/3d-druckwerkstatt Diese Anleitung ist…
This is an an adapter that keeps smaller cards (in this case, Wyrmspan cards) from rotating and getting caught up when being shuffled using a hand cranked automatic shuffler. This isn't a perfect solution, but works well enough. The…
Re-design d'un filtre pour spa en deux partie --> il n'y a que la partie fixation à réimprimer en cas de casse. Peut etre collé au besoin mais de par la fixation doit tenir en place. Pour les machines dont les ponts sont bien réglés il…
I have printed this with petg. seems to work ok, but would probably be better in abs or asa
Man kann die Drachenkartenhalter und Hölenkartenhalter mit Magneten verbinden. 6x3mm Benötigt werden: 3x Schwingenschlag_Caves 3x Schwingenschlag_Cards 1x Schwingenschlag_Automata 1x Schwingenschlag_Chips 1x Schwingenschlag_Chips2 die…
German follows after English. Since the internal mini filters are not sufficient to completely filter the water, I designed a complete conversion for MSPA Aurora-type whirlpools or comparable pools with similar wall thicknesses (approx.…
Here's an insert for Wyrmspan where you'll find : - 1 multiple ressources box with it's lid (printed with transparent filament) - 1 coin box with it's lid (printed with transparent filament) - 1 tray for guilds tiles and the score sheets…
This model was created by me using Deck In A Box by Steve Genoud. I use a piece of velcro that I slide in to keep it closed. Printed on a stock Prusa Mini+ with Input Shaping: Layer height 0.30 First layer height 0.30 Bottom layers 3 Top…
ohne suports ca 45 min ca 13 rp
Replacement tip for parasols (inner diameter 23.5mm) Ersatzspitze für Sonnenschirme (innendurchmesser 23.5mm)
The game has an okay storage solution for the dragon eggs, but not for cards and ressources. With this print you can fix this. The cards now fit neatly between the game board, and the resource tokens are easier accessible. Image 5 shows…
Einfacher Stern, ca. 16cm. Der Stern ist relativ leicht gedruckt PLA (hier Overture Mattes PLA rot) 0,2mm Schichthöhe Oben und unten 3 Schichten 10% Füllung Stützen unter dem Halter Die Ecken habe ich mit Mausohren an der Platte gehalten.
This is a wall mount for the Shark SteamSpot Steam Mop, S2001 model. It didn't come with a wall mount, so I decided to make one. I recommend printing in a strong print setting and orienting it as shown in the images. This orientation will…
This is kind of a remix of the player token holders from https://www.printables.com/model/745579-wyrmspan-board-game-insert That model doesn't allow remixes, so this is what we get :) I didn't like the six coin slots all that much, so I…
A custom insert for Wyrmspan that: Speeds up setup and tear-down Streamlines play Organizes play space Keeps components from mixing during storage without bagging anything Includes detailed instructions for assembly and use. This insert…
In China at Ali I bought 3 waterproof led lights. (see images) For this I made a holder that is clamped on the water filter outlet of the inflatable Mspa hot tub. On the side of the water outlet are recesses where the holder clamps.…
This is an organizer for Wyrmspan and the Dragon Academy Expansion. It holds all the content without any lid lift. It does not support: sleeved cards play mats the original round board (although it probably would fit) The design was done…
This is a very simple case to protect the development board from dust and ESD, at least partially. Just orient both parts flat on the print bed and use whatever settings you feel like.
Token, egg and card container for Wyrmspan game, fits into original box alongside other game boards and cards
Inspired by wingspan organizer by @gnollzor : https://www.printables.com/model/1511786-wingspan-card-and-egg-holders Print at 0.2mm layer height. The center piece requires supports. PETG with PLA supports works great.
Over on Tindie there's this cool Nixie Clock kit that I like so much, I've purchased two of them (granted I killed the first one and couldn't fix it, but... moving on). After I assembled the kit I determined the sufficient, but plain…
The eye has to be glued into the tower.
ich habe diese Halterung auf https thingiverse gefunden und habe sie leicht verändert!
Ein Aufsatz für den Weihnachtsbaum, mit dem ihr euren Hernnhuter Stern auf die Spitze setzen könnt.
Distanzen für die Filmspulen in Paterson Filmentwicklungstanks. Wenn man nicht alle Spulen braucht, damit die Spulen im Tank nicht verrutschen. Für 2 Spulen Tanks und 3 Spulen Tanks in insgesamt sieben verschiedenen Längen, je nachdem wie…
An insert for the boardgame Wyrmspan by Stone Meier Games. During the process of designing the insert I tried to keep ease of use in mind as much as possible, making it easy to setup the game aswell as pack it back up again. To help with…
Hallo zusammen, hier ein Adapter, der auf das Bremspedal geklemmt werden kann, um den Bremslichtschalter zu betätigen. Nach tausch des Bremspedals hatte ich bei mir ca 15mm Abstand zwischen Pedal und Schalter. Das Loch ist für einen…
I love the Wyrmspan box organizer from Hextra (https://makerworld.com/en/models/187990?from=search#profileId-207130), but I wanted to make a second resource tray. We like to have a tray on each side of the table so everyone is within easy…
What an excellent design! All I did was changed dimensions to match the original game piece. 18x15x10 Printed with .6 nozzle and .4 draft layer for speed, so not the best print. Yellow is the original piece and Peach is this file
I made this because a sleeved organizer I like has the coins stored separately. This is my attempt at storing the starter coins along with the other player pieces, instead of in separate trays. It has a magnetic lid because magnets are…
I have designed a Multiplier Token which is double sided - x2 & x5 on the same coin. I allowed for a 0.001mm recess in order to paint white on each side from the slicer. Ideally, I would like to have the two colors separated into parts so…
A small guide to use with scalpel blade (works fine with Stanley blades) to trim sleeves for Wyrmspan Cave Cards. Use Sleeve Kings SKS-8808 sleeves, this will trim them down to fit ~ 59 mm x 57.5 mm cards (i.e. cave cards with a little…
Minneapolis airport runway map No supports Happy printing!!
Meine Originales ging jetzt nach 66 Jahren kaputt. Gedruckt aus TPU mit 0,15mm Schichten. Oben 10 massive Konturen, unten wenig, 25% Infill. Geht stramm drüber ließ sich aber von Hand gut montieren. Original Teilenummer müsste die 11 53…
🇬🇧 English: This is a custom-designed replacement container for the Nilfisk Super Foamsprayer. It features a compatible thread for the adjustable foam head. Ideal if your original bottle is cracked or if you want to have multiple bottles…
mit diesen Teilen könnt ihr euren Pastamatic Filamentwickler mit einem Motor antreiben. Es gibt schon ein paar Varianten davon, aber wie so oft, war ich nie so ganz zufrieden und habe mich deshalb selbst an die Arbeit gemacht. Bei mir…
Die Idee ist schon älter ich habe aber bemerkt, dass es eine neue Version gibt die mit den hier zu findenden Gadgets nicht kompatibel ist. Es wurde wohl vom Hersteller eine zusätzliche Sperre an der Gewindestange angebracht (Bild). Man…
Box für die nachladbaren Filmspulen Nikon AM-1 und / oder für die Nikon F Filmspulen ohne deren Behälter. Die Innengröße der Box ist entsprechend dimensioniert um sie mit Velour (DC-Fix Velour) auszukleiden, damit die Filmspulen nicht…
Everything fit exactly in the box as visible on the below picture: I am attaching 3mf file with two plates filled with the models, 2 models including whole plates ready to be printed and all the models separately. Please make sure to…
have to made the corners round :-) Category: Parts
Can't hear the beeps on your MSX/MSP/MSv3? Worry no more with the "FlyBeeper" mod created and designed by me! Just print it, and replace the old one. Note: you will forgo the USB port but I've never used it in the 2 years I've been riding…
While building a breadboard trainer lab I needed a way to mount a Texas Instruments MSP430 Launchpad development board. At the time, I didn't have 3d printer, so I built this out of wood. I have now modeled this for 3d printing. Hopefully…
This case is to suit the Jumbospot Pi hat for the Raspberry Pi Zero W found on eBay which seems to be a clone of the Zumspot. Created in openSCAD if you need to customise. Print the 3 parts Insert the Pi into the lower piece Press the…
YeaLink MSpeech AI Microphone Wallmount
Stemspacer for the standard 28.6mm (1 1/8″) stem 28.6mm (1 1/8″). Disclaimer: I did not test sufficiently if the 3d printed spacers are strong enough so print them at your own risk. I just used them to build the bike and later replaced…
Start with black filament then change to white at the pause in the gcode/3mf. Middle circle is sized to flush glue an 8x3mm magnet to the back.
Source: https://repables.com/r/534/ Author https://repables.com/u/macegr/ Garrett Mace macetech LLC
I had the same issues as everyone else on the original make. I put the scale side up and part of the wing won't be good. Wing up and the scales are bad but the wings still didn't show good. I took the STL file to TinkerCAD and added some…
Print solid with no supports. I used a soldering iron to press the M3 nuts into the retaining holes. Screw size is M3x6mm. Print is for left (driver's) side. Mirror along y axis to for other side.
