Liczymy pasujące modele…
This is an addition to my SnapDIN series ! It is a simple attachment for cable routing that uses my DIN Rail attachment clip to snap securely on to railing.
For my modular desk project, I wanted a cable management tool that let me attach anything, and swap things out often. Cable trays, ties, and hooks just weren't cutting it. When searching for a modular solution, I came across DIN Rails, a…
The Snap Deck is a modular playing card holder that I started developing to help my grandmother hold her cards on game night. It ended up growing into something much bigger with feedback from the community and a lot of time in CAD and…
INTRODUCTION: I love the idea of PolyDryer/SnapDryer but not the standard blue color so I redesigned every plastic parts so I can make my own in the color I wanted. XL VERSION HERE : OPTIONS: I offer 2 options for attaching the lid clips:…
These tags were made for the super cheap and readily available Ntag215 25mm RFID tags. Special feature for Polydryer / Snapdryer owners: The ring on the tags is designed to fit over the rubber plug of the boxes. You can put the label on…
Note: This design is meant to work with 25mm round NFC stickers (Ntag213/Ntag216/Ntag216) My 3D printer (Snapmaker U1) has RFID readers which can read NFC tags with Snapmaker U1 Paxx12 Extended Firmware if the spools are side mounted. I…
Dry your desiccant in the 3D printed container(s) you use in the box . No need to empty and refill. No mess desiccant drying. I hated doing the empty and refill task for all my desiccant containers (10 boxes with 2 each), those stray…
The Snap Deck is a modular playing card holder that I started developing to help my grandmother hold her cards on game night. It ended up growing into something much bigger with feedback from the community and a lot of time in CAD and…
The Snap Deck is a modular playing card holder that I started developing to help my grandmother hold her cards on game night. It ended up growing into something much bigger with feedback from the community and a lot of time in CAD and…
The most recent set of boxes I received (4 of them) all have a bit narrower slot to place the “toe” into. I have remixed V3 into this V4 using the values supplied by Macco in his review of V3. I did a test print and they do slide in the…
Previously I had a Sunlu S1 Drybox mounted to the rear of my J1, but recently I upgraded to the Snapmaker SnapDryer (aka Polymaker Polydryer ) and were able to fit both the dryer itself with two storage boxes to the rear of the machine.…
V4 mod with more narrow toe uploaded as a option for download. I did a test print and V4 works well with the newer boxes. Edit: The most recent set of boxes I received (4 of them) all have a bit narrower slot to place the “toe” into or…
SnapDeck is a clean, minimal playing card holder designed to print in just 21 minutes while securely holding a full deck of standard cards. It’s perfect for keeping cards organized during game night, storing decks on a shelf, or holding…
***Remix file uploaded*** ***Version2*** Airflow diverter to force airflow upward to the spool. There is about a 15 mm gap under the rollers that doesn't do much for drying, so I made a diverter to force warmed air upwards to the spool…
There are similar designs available, but I felt they had some flaws I wanted to fix with this design: Increased friction due to rougher and bigger contact area with the spool No holes in end plates, reducing potential air exchange Glued…
Prusa CORE One L PolyDryer / SnapDryer shelf pair that each attaches with a 3M Command large adhesive strip. It’s a compact design using minimal filament and doesn't require magnets or screws. The Prusa CORE One L has enough vertical…
This is just a mini sculpture of the Qualcomm Snapdragon chip that I made as a quick gift to a family member who works at Qualcomm. It took roughly an hour to design with my basic "skills" and it took a few hours to print. It's not…
Ive printed at 0.2mm with Gyroid infill, 6 wall loops, The left and right variants are to get the dry boxes a bit further to the front, and reduce the bend in the filament pathway of the rear box to the feeder of the Snapmaker U1.
The base model height is 2.5 mm, print the letters_border with z-offset. Snapdragon and letters were printed with a wall thickness of 1.2 mm.
In the past, I have used 3D-printed business cards to display my expertise in this style of manufacturing. Now, I would like to expand their influence to showcase my design aesthetic principles and talents. These cards will be mounted on…
We used Slicer Goodies on here to make the lettering and not sure where we got the blank plant label from. Hope every one likes it. Look at all the other plant labels in our collection.
My spools would “climb/roll” up the wall of the dryer box when at the end of the spool when there wasn't enough filament weight to keep it centered. This happened with both the small OEM spool holder and by using the bottom rollers. This…
45 degree angle display Polydryer Snapdryer mod. No wire splice . No supports needed . Faceplate designed into top model . No M5 screw needed . Photos with step-by-step instructions start to finish . I really liked Kartans mod but had…
Version 2 of my police badge for the New Angeles Police Department, a part of the Android Universe. Category: Costume
5mm button set I designed for my 45 degree angle Polydryer Snapdryer display model. I wanted more height for the buttons from the faceplate and the white from the OEM (red & black rubber) buttons was fading due to use. I did a color swap…
Clear Cover Snapdryer Dessican Basket Spare Part glue the seperate printed clips in place to prevent them from breaking (print orientation)
3mm button set I designed for my 45 degree angle Polydryer Snapdryer display model but I wanted more height from the faceplate so I made a 5mm set also. The white from the OEM (red & black rubber) buttons was fading due to use. I did a…
I wanted to easily move my SnapDryer boxes around my printer for top feeding TPU filament, so I found this existing wall mount for the SnapDryer and modified it to attach to a pegboard.
This is a printed replacement for the acrylic top panel of the IKEALLER v2.3 enclosure. Two seats in the lid let you drop a Polymaker PolyDryer or Snapmaker SnapDryer straight into the chamber, so the dryer's warm air heats the printer…
Clear Cover Snapdryer Dessican Basket Spare Part glue the seperate printed clips in place to prevent them from breaking (print orientation)
SnapDeck is a clean, minimal playing card holder designed to print in just 21 minutes while securely holding a full deck of standard cards. It’s perfect for keeping cards organized during game night, storing decks on a shelf, or holding…
Prusa CORE One L PolyDryer / SnapDryer shelf pair that each attaches with a 3M Command large adhesive strip. It’s a compact design using minimal filament and doesn't require magnets or screws. The Prusa CORE One L has enough vertical…
The most recent set of boxes I received (4 of them) all have a bit narrower slot to place the “toe” into. I have remixed V3 into this V4 using the values supplied by Macco in his review of V3. I did a test print and they do slide in the…
A recreation of the New Angeles Police Department badge that Vince has in the artwork of his Android: Shadow of the Beanstalk per-generated character for GenCon 2018. Category: Costume
