Liczymy pasujące modele…
Rail Risers for Kato Unitrack - N Scale / N Gauge To raise the Kato Unitrack Rails from 2 to 50 mm with increments of 2 mm. This is an easy way to determine a suitable track inclination for your trains. For instance: 2 % inclination == 10…
When in need of a Kato Unitrack Insulated Unijoiner , this 3D-printable solution is ready to click into place. Designed as an alternative to Kato’s 24-816 or 24-819 insulated rail joiners , it provides reliable electrical isolation for N…
For mobile layouts KATO’s Unitrack is the first and only choice in n-scale and one of the best track systems in general: https://unitrack.katomodels.com/what_is_uni_track The system includes viaduct tracks and as I have made a viaduct for…
Here are Piers/pylons for KATO’s viaduct track. Compared to original piers here you can find piers in 5mm steps up to a height of 120mm giving a smooth ramp to never reached heights of viaducts. The height is defined from ground level to…
For single track versions see: https://www.printables.com/model/1243296-diy-viaduct-for-katos-unitrack-n-scale/files Here are now the double track versions. I made viaducts for all possible combinations of tracks offered by Kato, so you…
********This Blaster is intended to look like a real firearm, I highly recommend using a orange muzzle device******** UPDATES: 5/27/2025-removed faulty trigger spring, fixed slide tolerances, fixed mag indent (All Muzzle Devices are…
Beside the Unitrack rails, Kato has also Unitram rails for creating layouts with trams. This system comes with street plates and even modular houses to create whole cities. The Unitram system can be connected to the Unitrack rails to…
Time to extend the DIY-viaduct with points/switches and to add DIY-signals! See pictures for more information. Here the advantage of possible cable routing inside the DIY-Viaduct for Kato’s Unitrack comes to the light. For viaducts and…
For model railway modellers lacking the space for a permanent layout or trying something new Kato’s Unitrack is the first choice in n-gauge. Kato offers also elevated tracks and ramps/viaducts (see for example Variations-Sets V2 or V13),…
The idea for a stopper for Kato’s Unitrack is anything but new. Wapata made one and published at Thingiverse: https://www.thingiverse.com/thing:147963 But I wasn’t satisfied with, as it stops the rolling stock with the coupling and…
For single track viaducts see: https://www.printables.com/model/1243316-diy-piers-for-viaduct-for-kato-unitrack Here are Piers/pylons for KATO’s viaduct double tracks in two styles, one that fits to single track piers (23-015…017) and the…
This is an Unitra Tonsil speaker Pin/peg that holds the grille. It's modelled from Space '86 model.
Holder for hanna checker nitrate
used tinkercad to modify Spoon77's hook design to make a loop for armrest bag straps. thanks Spoon77! Print Settings Printer: Cetus3D Rafts: Yes Supports: Yes Resolution: 0.3 mm Infill: 65 Filament: Hatchbox PLA glow in the dark Category:…
KATO Unitrack Rail Clips. To secure the rails to the building plate without glueing the rails themselves Printing I printed with PLA, 0.2 mm layer height. Assembly Slide the clips under the rails. Use glue under the clip or screw the…
Design These are designed to be compatible with the official Kato N gauge diorama kits 28-889 Kato UniTrack Diorama R183 & 28-888 Kato UniTrack Diorama S124 Straight Kit As used in the Kato Dioramacircus. These models offer support for…
********This Blaster is intended to look like a real firearm, I highly recommend using a orange muzzle device******** UPDATES: 5/27/2025-removed faulty trigger spring, fixed slide tolerances, fixed mag indent (this blaster has no slide…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs No one doubts the effectiveness of clinical simulation as a method of teaching future and existing medical…
A better way to organize Hanna Test Kits.
Modernes 2-ständiges Lokdepot für Spur N Anlagen. Das Modell wurde speziell für Kato Unitrack Gleise entwickelt und eignet sich ideal für moderne oder klassische Bahnbetriebswerke. Das Gebäude besitzt 2 Gleisstände detaillierte Tore…
********This Blaster is intended to look like a real firearm, I highly recommend using a orange muzzle device******** UPDATES: 5/27/2025-removed faulty trigger spring, fixed slide tolerances, fixed mag indent (this blaster has no slide…
On request from user of such beautiful KATO-train sets, like the ICE4 or the Pacific Surfliner, I made a wider version of the viaduct for Kato’s Unitrack:…
🇲🇦 مرحبا بك في المغرب Welcome to Morocco! This model was designed by Mohamed Naciri @mohamed.naciri21 A kasbah is a fortification, citadel or stronghold, and this one is located in what was the port of Mehdya (also spelled Mahdiyya,…
Having been unsatisfied with common methods of attaching N-Scale Kato Unitrack to XPS foam panels, I designed these anchors to provide mechanical alignment and grip, with the ability to remove and reset track as needed. The anchors use a…
Of course, tighter radii are always a compromise between reality and the space available for a model railway layout, but for those cases where a tighter radius is needed, here I offer DIY viaducts with slightly wider spacing between the…
Small pieces I made to keep my double track a consistent distance from each other. 8mm is the gap between the plastic ballast pieces. Referenced from the Double Track Truss & Girder Bridges. Use small pieces for curves and long pieces for…
My original clips for packing Kato’s unitrack works quite well for tracks only, but can’t be used for points (also called railroad switches or turnouts), as these cannot be stacked so close one on top of each other, due to the mechanics…
Here's a new version of the piers for KATO’s track systems. The goal was optimal stability with compact storage, as well as the ability to use them not only for viaducts but also directly with Unitrack track. Especially with temporary…
Having published DIY-double track piers for viaducts, someone pointed out, that the 6-leg piers are more stable, than the standard single column piers and it would be great to have an extension, to use them for a 2nd tier to. So, I…
These are a set of organizers meant to hold 10 pieces of track each to allow better organization and storage. I have also found them to be useful if you are taking some track someplace to set up a temporary layout, as it keeps it all…
To complete the wider versions of my viaducts here you can find some special parts for turnouts/points and signals but also some parts to connect double track sections with single track. The advantage of having a viaduct that works also…
Piaristický kostol sv. Ladislava v Nitre/ The Piarist Church of St. Ladislav in Nitra
Simple 45 rpm spindle adapter for Unitra vinyl players Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** 0.2 Infill: 30 **Filament:** Tiger3D PLA Black Category: Audio
I wanted to set up a Christmas train on my carpet with Kato Unitrack. Every time the train rolled over one of the joints, the track bent down which can cause scraping and derailment of pilot wheels. I have decided to design the "carpet…
You have S186-tracks of Kato’s Unitrack, but need Unitram-double track plates for your layout? Here is the solution, inlets for filling the gap. Have fun! Please note: “Kato”, “Unitram” and “Unitrack” are trademarks of K.K. Sekisui…
Switch replacement for an old tape recorder Unitra M2024-S.
Stworzone jako emblemat do przyklejenia na taśmę dwustronną.
Here is an adapter to retrofit a Tomytec TM-TR02 chassis into a vintage Minitrains Plymouth. The vast majority of original Minitrains suffer from split gears. To fix this I decided to re-power mine with a more modern and easily sourced…
Having created a DIY-print version of Kato’s viaduct track and some more Add-ons to it, as well as the original, I was several times asked, if I could design a similar viaduct to Kato’s H0-Unitrack, especially as Kato itself doesn’t offer…
This is an AddOn to my universal, stackable Piers for Unitrack & Viaducts: https://makerworld.com/de/models/2671120-universal-stackable-piers-for-unitrack-viaducts#profileId-2985741…
Add-on to previously published design: https://www.printables.com/model/682214-katounitrack2lego-support-n-gauge It allows you to use catenary poles up to the beginning of viaducts and even further, if wished. KATO itself knows two…
It's hard fo alligne the polarscope when it isn't illuminated. So I bought the cheapest polarscope light I could find and made myself an adapter for it. have fun :) and cloudless nights ;) Print Settings Rafts: Doesn't Matter Supports: No…
********This Blaster is intended to look like a real firearm, I highly recommend using a orange muzzle device******** UPDATES: 5/27/2025-removed faulty trigger spring, fixed slide tolerances, fixed mag indent (All Muzzle Devices are…
this is a collection of little helpers for Oregon Minitrack holder to place a compass on it to place it in North longer holder for polscope to see Polaris also with mounted camera holder to justage the polscope
Knob for radio Unitra Junior Line Height 0.24 Print without support i printed with PLA but PETG is better
Projekt elementu do korektora graficznego DIORA FS 042 , stworzony przeze mnie od zera na prośbę znajomego. Udostępniam go prywatnie i niekomercyjnie – projekt nie był robiony na handel. Ważna uwaga: Model nie został przeze mnie fizycznie…
A very practical and reliable selfie stick holder for the very sensitive Saphymo/Bertin miniTRACE radiation detector. The friction joint is compatible with the mounts for action cameras and can be used with any compatible other equipment.…
About pictures: white version is a prototype, black version is a final version, printed from attached STL. Category: Audio
Adapter plate suitable for Rolly Toys Minitrac ride-on vehicles. It consists of two parts: the adapter plate, which is simply inserted into the ride-on vehicle’s trailer hitch, and a corresponding holder for tools or other items that…
J'ai réalisé ce fichier 3D à l'aide du modèle initialement créé pour la découpe laser par Sierramike du forum “KATO mini-diorama Fr” que vous pouvez trouver à cette adresse :…
A telemntry kit with avionics bay and ground station
KATO Unitrack Rail Clips. To secure the rails to the building plate without glueing the rails themselves Printing I printed with PLA, 0.2 mm layer height. Assembly Slide the clips under the rails. Use glue under the clip or screw the…
Knob for radio Unitra Junior Line Height 0.24 Print without support i printed with PLA but PETG is better
For model railway modellers lacking the space for a permanent layout or trying something new Kato’s Unitrack is the first choice in n-gauge. Kato offers also elevated tracks and ramps/viaducts (see for example Variations-Sets V2 or V13),…
