Liczymy pasujące modele…
Use normal supports on build plate only. A compact twisty sensory fidget sphere with a spiky textured surface. The sphere is built from rotating segments that can slide and twist along the central axis, creating a satisfying mechanical…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
Article with build instructions: https://blog.prusaprinters.org/dryboxes-and-alternative-spool-holders-not-only-for-multimaterial-upgrade/ Material: Prusament PLA Galaxy Black
Wydruk około 13,60 €–16,62 € nettoWstępna wycena jednego wariantu
Next remix of Drybox for Prusa Printer Enclosure V2 - with humidity sensor. Print instructions You can place five pieces of this drybox on the top of the Prusa Printer Enclosure V2. Can be used as a standalone spool holder for Original…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
Reverse bowden IR Sensor Cover for the MK3s I have included 3 versions one for the PC4-M10 pass through connector and another for the PC4-M6 connector. I have now added a version for the PC4-M5 connector. Edit 19/2/19: I have added a M5…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
This design was inspired in 2 other designs in this site: https://www.thingiverse.com/thing:2339441 https://www.thingiverse.com/thing:2668159 Since I could not find for the original file to adapt it to my battery with protection circuit…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Used to detach the filament sensor from the original spool holder. You might want to do this when building a custom enclosure for your printer or when using a different spool holder. Features: Easy print without support structures Firm…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
A spiky sensory fidget sphere designed for tactile stimulation and stress relief. With a diameter of 80 mm, the surface is covered with evenly distributed spikes that create a pleasant massage-like sensation during use. The model prints…
Wydruk około 4,38 €–5,35 € nettoWstępna wycena jednego wariantu
This holder makes changing filament one arm operation again and makes the printer tidier. Primarily intended for our farm, where spools are hanging from the top, but you can use it even on the table with spool behind your printer, just…
Wydruk około 1,34 €–1,63 € nettoWstępna wycena jednego wariantu
A spiky sensory fidget roller designed for stronger tactile feedback and massage. With a height of 110 mm and a diameter of approximately 32 mm, it fits comfortably in the hand and rolls smoothly during use. The surface is formed by small…
Wydruk około 2,01 €–2,46 € nettoWstępna wycena jednego wariantu
Upon assembling my new MK3S Kit I noticed that the Autoload Function did not work and the IR-Sensor always showed 1. A quick search led me to this entry in the Prusa Forum:…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Credit to original creator: https://www.thingiverse.com/thing:5148846 Printed at scale 150%, and added custom support for the chin.
Wydruk około 8,13 €–9,94 € nettoWstępna wycena jednego wariantu
Outdoor cover for the popular analog Capacitive Soil Moisture Sensor v2.0 (according to comments, this also fits version 1.2). No soldering changes are required. I just crimped a JST 2.54 mm female connector on the cable. The cable…
Wydruk około 0,93 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this simple and (almost) fully printed anemometer for students in local high-school programming classes. 3D printed parts (PETG): Top dome Top core (this is where a small magnet is placed) Bottom body (this part contains a Hall…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stand for Henson Razor requires no supports
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
This model is originally from Tingiverse, made by Printer2261 also known as Shane Jackson. https://www.thingiverse.com/thing:5172136 But I thought that users of printables would also like to be able to print this, since the Tesla Model Y…
Wydruk około 8,62 €–10,53 € nettoWstępna wycena jednego wariantu
Rowan Atkinson, Mr. Bean Meme
Wydruk około 9,17 €–11,21 € nettoWstępna wycena jednego wariantu
Cupra Born has some big trays to store things. But it is difficult to organize cards, pens, coins for shopping carts etc. So I first tried the model of Sven Van Opstal at Thingiverse to insert in one of the cup holders. In my case it had…
Wydruk około 7,61 €–9,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the 2022 version 5 of the MiSTer Multisystem enclosure. For printing the enclosure, please read the included PDF - how to print guide. Multisystem is brought to you by Heber ltd and RMC Retro. If you have any technical questions…
Wydruk około 2,20 €–2,69 € nettoWstępna wycena jednego wariantu
Use normal supports on build plate only. A compact twisty sensory fidget sphere with a rounded textured surface. The sphere is built from rotating segments that can slide and twist along the central axis, creating smooth and satisfying…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
Do the exposed PCB's of the Ender 3 Pro push sensors bug you? Me too. That's why I made these. Just pop them on and enjoy.
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
3D printable wall mount for Philips Hue Motion sensor , give a little bit wider rotation angles, and allows easy battery changes while keeping the mount aligned to the correct direction. Check out all the mount options . The mount is…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Esta peça esta no formato para Canhoto é necessário realizar o espelhamento para ser utilizado por destros. Utilizei as seguintes configurações na minha impressão: Preenchimento: 30% - Giróide Suporte: Sim (arvore) - Coloque a peça de pé…
Wydruk około 2,00 €–2,44 € nettoWstępna wycena jednego wariantu
Star Wars Data Console Switch Plate Sci-Fi Switch Plate.
Wydruk około 4,85 €–5,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
READ THIS TO BETTER UNDERSTAND THIS MOD BEFORE PRINTING This mod needs you to flip the IR sensor connector so be ready to swap cables as described below. You can damage the sensor if you will not follow these instructions. Updates at the…
Wydruk około 4,97 €–6,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use normal supports on build plate only. A compact twisty sensory fidget sphere with a dimpled textured surface. The sphere is made from rotating segments that can slide and twist along the central axis, creating satisfying mechanical…
Wydruk około 1,30 €–1,58 € nettoWstępna wycena jednego wariantu
BMP280 / BME280 Sensor Case with strain relief for 2-8mm diameter Cables You need 2x M3x10 DIN912 Screws This is a composite Part, click on “Split to Parts” in PrusaSlicer and right click on the intended elements. Add the following Part…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Greetings all! This is a set of sensory/noise reduction earplugs for individuals who are looking for a little bit of noise reduction for everyday activities, like going to the movies, being in a loud restaurant, and much more. These are a…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Console tray based on zrides' center console design (thingiverse) with the following changes: removable divider radius added to all inner corners for easier dirt & dust removal outlets for usb charging cables added Printed for Tesla Model…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
A small toy for your child. I use superglue to mount the cap to the animal. Use M4 bolts to mount the labirint to some surface.
Wydruk około 6,54 €–8,00 € nettoWstępna wycena jednego wariantu
I like the idea of varstef75's sensor holder, however the curved hanger is unnecessary thick and the sensor frame is a bit too small. So, I redesigned it from scratch, using half of this holder instead, which should fit the sensor easier…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed a clip to hold the G Sensor cable for the Ender 3 V3 SE printer, as I didn't like it hanging loose. I found another clip that attaches it to the top frame, but it wasn't functional for me because it stretched the cable too much…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
I remixed https://www.prusaprinters.org/prints/24951-prusa-mini-filament-sensor-holder-v2 because I didn't have an m3 square nut available and the thread of the printed m3 square nut was to weak. Hence I adapted the holder for use with a…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Allow me to introduce you Capacitive Soil Moisture Sensor v1.2 and v2.0 Case (box). I required this sensor in one of the previous projects and create case for it, to make it more secure. Hope you will enjoy it. Print instructions:…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
No reason at all. None. I picked the egg because it had a nice chin & nostrils for vase mode.
Wydruk około 2,38 €–2,91 € nettoWstępna wycena jednego wariantu
I really liked this design and found it to be closest to the OEM one that Tesla used to provide for free. However, I found the STL to have some odd artifacts and difficult to paint in PrusaSlicer for a combined PETG+TPU print on my XL.…
Wydruk około 10,11 €–12,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sliding tray that fits in the center console of Tesla Model Y and Model 3, with 2nd generation center console. The tray can slide forwards to allow easy access the space underneath: To minimize wear on the center console, make sure you…
Wydruk około 13,90 €–16,99 € nettoWstępna wycena jednego wariantu
Print 4 of these and insert them on the sides of the console. This raises the console 3cm above the surface for improved air circulation and better cooling. (You can use some rubber tape for the bottom of the feet) Remixed form…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Jdsfighter model gave us a great baseline design, but in the Australian version of the IONIQ5, the height of the rear part of the tray meant the cover wouldn't close. So we slightly tapered the design and also adding a few more…
Wydruk około 5,12 €–6,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a scale update remix which resizes a Tacoma center console insert to fit a Toyota 4Runner Gen5. There are 3 different variations. One is a single tray. Another is the same tray, but with a center divider and coin holder. The last…
Wydruk około 6,84 €–8,36 € nettoWstępna wycena jednego wariantu
This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
A holder for the Abbott FreeStyle Libre sensor that can be used with a 20mm wide elastic band. This holder helps to keep the sensor stuck on your arm.
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Summary Organizer tray for the arm rest console - adjusted STL with slopes under ledge for less requirement for supports, and gcode file adjusted to fit supports on the Mini+ plate. Note : Print using the gcode file if possible (using…
Wydruk około 11,28 €–13,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design , but is a new development except for the rear ball joint . The radar…
Wydruk około 1,61 €–1,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since I've mounted 2 spools on my printer for fast end easy change I created a model to attach the filament sensor - still flexible - in the center. If you also want a secondary spool, check out my other model:…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I'm working on a stealtchanger and wanted to intergrate a filamentsensor in the toolhead, additionally you will need a 5,5mm steel ball, 2x m3x35mm bolts and a D2F-L microswitch
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Update to the Multisystem FPGA console enclosure for 2023 - easier for print farm production, quicker using 0.6mm nozzles (recommended) the design is tuned for 0.6mm E3D V6 nozzles on a Prusa i3 MK3/3+/3S+ machine. For construction and…
Wydruk około 5,64 €–6,90 € nettoWstępna wycena jednego wariantu
You want to feed your Vyper with filament through a bowden tube? With this new filament holder design, you can stick a bowden tube into the filament sensor input and feed your filament from a distance. Replaces the old tiny metal bracket.…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The cubes measure 4×4×4 cm. There are 2 pictures on each cube that you can use to stamp into modeling clay or kinetic sand. Inside there are molds for different objects. The cube develops fine motor skills, vocabulary (create stories),…
Wydruk około 6,51 €–7,96 € nettoWstępna wycena jednego wariantu
Print Dwayne at any scale you need (mine was 75%) and enjoy his plant-growing abilities. Print Settings: Resolution: .15mm Infill: 15% Supports: No Rafts: No Material: PLA Printed on: Creality CR-10 Note: I was unaware of this, but…
Wydruk około 3,23 €–3,94 € nettoWstępna wycena jednego wariantu
Printer wallet for up to 5 cards capacity (no printing of numbers in importance, common on credit cards). “Pop-up” system for card withdrawal, I use the day-up on a daily basis. It has an RFID Protection security system due to the use of…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Note that this will fit 2024+ Tacomas only! The Tacoma has a lot of space in its center console, but it's deep relative to its width; a tray insert makes it a lot more usable. You could buy a similar part, but why buy when you can print?…
Wydruk około 12,07 €–14,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I bought a SUNLU Filament dryer to help solve my filament moisture issues ( https://amzn.to/2JTUdNk ). I designed a mount to use the small rectangular temperature/humidity sensors ( https://amzn.to/372N2eJ ). It uses the upper filament…
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is implementation of Bondtech feeder with Prusa internal filament sensor (IFS). You need extend some holes with roamer 3 mm and thread M3, M2 (for filament sensor) and M6 for fittings. Older version without filament sensor
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Remix of dMosher's design “ Larger Console Tray for Honda Pilot or Ridgeline ”, with minor improvements. This should be compatible with the following vehicles that use “Base Tray” part number 83407-TG7-A01 or 83407-TG7-A02: 2016-2022…
Wydruk około 10,03 €–12,26 € nettoWstępna wycena jednego wariantu
Holder for temperature sensor from Aqara. The sensor just slide in the holder and can be placed on shelf or furniture. Print settings: PLA Layer height: 0.10mm
Wydruk około 1,74 €–2,13 € nettoWstępna wycena jednego wariantu
This is a magnetic holder for temperature sensors. You'll need a 8x4 or 8x3 mm magnet. There are three versions of the holder. The smallest one should work with sensors of ~4 mm in diameter, the middle one fits sensors of around 4.9 - 5…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Borrowed from OpenSourcePinball https://www.thingiverse.com/thig:2268960
Wydruk około 11,72 €–14,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a razor stand for the Henson Shaving AL13 safety razor. Includes a torque center that makes blades changes safer. Instead of holding on to the razor head with wet fingers, simple put the head of the razor in the torque center and…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
Use ASA,ABS, PA6 , print with support easy installation with direct taping screws 2.5mm diameter and 3.5mm screws or epoxy glue
Wydruk około 4,45 €–5,44 € nettoWstępna wycena jednego wariantu
Just a simple holder for those cheap panel mount hygrometers (widely available from ebay/amazon/aliexpress/etc). Print it face down, no supports needed (see .3mf).
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Just a simple DS18B20 Temperature Sensor mount. I printed it with PLA but if you need it in a place that gets hot you better use something that can withstand the temperature. Slide the sensor in from the top or the bottom. It has a tight…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just a quick and dirty solution for the wall mounted drybox https://www.prusaprinters.org/prints/4605-wall-mounted-drybox-with-sensor
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
Strong wall bracket with round bar support. -- A round bar with a diameter of 20 mm is required for the print. The round bar must be angled at the ends and must rest against the wall and the overlying wooden board. Printed with 0.4 nozzle…
Wydruk około 4,29 €–5,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A 3d printable in one piece model of the F1 driver Fernando Alonso
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
OK, so this is a remix of my own model here: https://www.prusaprinters.org/prints/5805-tesla-model-3-tray-wj1772-storage-slot . I've integrated a USB Hub into the tray. This essentially adds 3 more USB ports, which is perfect for me to…
Wydruk około 7,38 €–9,02 € nettoWstępna wycena jednego wariantu
This remix adds a mounting plate for a temperature humidity sensor to EnXLosure_Top_Door_Stop.stl , the Top Door Stop on the EnXLosure. You can use the Prusa Temperature Sensor https://www.prusa3d.com/product/temperature-sensor/ that…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter / Holder / Mount, for a common rectangular humidity and temperature Sensor. Can be installed and removed quickly - the same grip shape as the “Spool Holder”. Suitable for installation on the "Printer Frame" part. Material:…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've had my Wahoo Cadence sensor for a couple of years, the clip plastic became brittle and cracked when I took the sensor out. I made this replacement, because you cannot buy one.
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
Holds the square Xiaomi temperature and humidity sensor. (I think this is the Aqara version?) It mounts with a common drywall screw, or with a zip-tie. (There's a flat bit at the top of the screw hole to make zip-tie mounting a little…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
This is a new version of Domino. It's very helpfull for people with reduced vision or blind. Everybody can have fun! You can play following the shapes or just count the lines. The “S” is 1. The “circles” are 2. The “triangle” is 3.. and…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena jednego wariantu
support pour tenir la tablette ou même la switch
Wydruk około 2,61 €–3,20 € nettoWstępna wycena jednego wariantu
I had limited side room but sufficient vertical room for my 5 head Prusa XL, so I wanted to mount the spools above the printer, however the placement of the side filament sensors made this an awkward arrangement. I made the bracket that…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena jednego wariantu
Update 8/7/2022: Changed and reupload STL file of Prusa_Mini_Extruder_Rear_cover. Will try to update rest of the files (STEP, F3D) when I will have time. This remix of the Prusa mini extruder rear part with integrated filament sensor. You…
Wydruk około 2,29 €–2,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The stamp cubes measure 4×4×4 cm. There are 6 pictures on each cube that you can use to stamp into modeling clay or kinetic sand. The cube develops fine motor skills, vocabulary (create stories), and imagination. The cubes have the…
Wydruk około 4,60 €–5,62 € nettoWstępna wycena jednego wariantu
This is a bin for the front part of the central console in the Polestar 2. Handy to keep your loose change, for example.
Wydruk około 2,25 €–2,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of Alex Ward's MK3S+'s reverse bowden cover. I did not realize at first that the center post was not the same diameter as PTFE tubing, and was preventing me from threading my PC4-M10 fitting. I removed the center post similar to…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
A simple remix from original MK3s+ "fs-cover" and "MK3s PC4-M6 FilamentSensorCover" by RoboMagus to connect a reverse bowden setup using a PC4-M6 coupler on MK3s+.
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With this mount you can mount an Ultrasonic Sensor module on to a Stepper motor with a 3mm*5mm shaft.
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
This mount is used for mounting JSN-SR04T water level ultrasonic sensor on top of the IBC lid.
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
Here I have created a small angled mount for Philips Hue motion sensors. The mount is meant to be used together with the original mount. It should be possible to fix it with a screw or some kind of glue. For my picture I used an adhesive…
Wydruk około 0,54 €–0,65 € nettoWstępna wycena jednego wariantu
Bottle holder
Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu
This is a remix of the holder for an inductive sensor on a Pipersberg G4 RF1 c . It is used for an 18mm sensor with which I got more stable readings. It also comes with a thicker bolt that fits more tightly in the little cavity. I have…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
2014 - 2018 GMC Sierra Console Bin Cover. Covers the small bin below the radio as a false floor. Print instructions Printed in PETG, but can also be printed in ABS, ASA, or Nylon A modifier was used to reduce the number of perimeters on…
Wydruk około 6,95 €–8,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a small weather shield I created for an outdoor temperature/RH/barometric pressure sensor. Prints without supports (upside down). The mounting is designed to fit a common breakout board style used for the BME 280 sensor, though…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
I wanted to have all Filament Sensors on one Side. So i made a part that combined the 2 Sensors and added the Numbers via Prusa Slicer. You will most likely also be changing the PTFE tubes of the 3 Extruder on the right to be longer. Also…
Wydruk około 3,16 €–3,86 € nettoWstępna wycena jednego wariantu
🇬🇧 IKEA Tradfri Motion Sensor Corner Mount A holder to mount an IKEA Tradfri motion sensor in a corner. The sensor is simply plugged onto the holder. The holder can be glued into the corner, but also has a hole for a countersunk screw. 🇩🇪…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
CZ: (EN version follows) Na mém Prusa Mini mě rozčiloval původní senzor filamentu, který se “ginglá” někde na konci bowdenu. Našel jsem řadu existujících řešení, mimo jiné: Držák:…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
the rock “thinker" w/ .gcode
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
A sensor cover for the Adafruit Stemma Soil Sensor: https://www.adafruit.com/product/4026 Snaps Together nicely no glue needed. I print in PETg for outdoor durability. Logo on top (for those of you wondering) is for Team 4160 for which I…
Wydruk około 1,00 €–1,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a solar shield, aka Stevenson Screen, for large sensors. It has an interior height of 100mm and interior diameter of 76mm. It uses M4 threaded inserts for assembly of the screen to the base. The interior has a small ring pedestal…
Wydruk około 13,74 €–16,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I did not find any display cover for my uConsole that I liked, so I created my own. V1 is a bit more rigid than V0, if you need that. There should be enough space to access USB interfaces with the cover on. Print it with the top side…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
This is the MiSTer Multisystem2 Analogue enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support. Please read the…
Wydruk około 3,70 €–4,52 € nettoWstępna wycena jednego wariantu
This design will lock jumper wire connectors to the hooked male headers of circuit boards like the Arduine Sensor series.
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Model update: 30.1.2025 Description update: 10.11.2025 Assembly Notes — Steps That Differ from the Original Procedure Cut the PTFE tube to 27 mm , keeping the original chamfered outer edge . On the freshly cut side, create a small inner…
Wydruk około 4,73 €–5,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Toy. Sensory tray for kids. Additionally, I have included the .bgcode file with my two-color print setup, with manual color change, as seen in the photos.
Wydruk około 6,77 €–8,27 € nettoWstępna wycena jednego wariantu
Use brim, no supports. The Sensory Stones are a set of 6 handheld sensory stones , each featuring a different tactile texture designed to explore and fidget with using your fingers. Each stone has the same pattern represented in two…
Wydruk około 4,61 €–5,63 € nettoWstępna wycena jednego wariantu
Kabel: Aliexpress / Amazon Buchsen: Aliexpress / Amazon Version mit nur einem Anschluss Du suchst einen Anschluss/Schaltplan für die Volksfräse? Auf meinem Blog findest du einen Anschlussplan für die Volksfräse VF1 und dem Tillboard.
Wydruk około 2,91 €–3,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
BMW E46 Center console bin with retractable charger. Extra things you need: Sandpaper/paint if you want to make it need. Retractable unit from a retractable 12v car charger from Aliexpress.…
Wydruk około 35,40 €–43,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I found an excellent radiation shield model from @ilMitch_97530 . Unfortunately, I don't use Aqara sensors. So I adapted the original holder for the temperature and humidity sensor TP-Link Tapo T310. It was easy because the author also…
Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu
Is your i3MK3S+ printer wanting you to unload filament and reload filament in the middle of print for no reason? What's happening here is that the lever arm inside the extruder isn't fully blocking the light inside the sensor when the…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
![Radiation Shield for TP-Link Tapo T310 Sensor [Remix] [Update]](https://media.printables.com/media/prints/455919/images/3780277_097a7147-9ad7-4712-9ca0-bcdb72af705a/img_20230423_122418783.jpg)
