1092 modeli
UPDATE: Some people have had trouble with weak screws, so I've uploaded new files for the screws, made to be printed horizontally for stronger layer lines. Most printers could print the regular screws just fine, but if they seem weak…
Wydruk około 3,14 €–3,84 € nettoWstępna wycena jednego wariantu
A basic model for quick and repeated printing. Key attribute is the blade which has been blunted so kids can play safely. Printed on a MK3S+ at 0.2mm quality, PLA, no supports, and 15% infill.
Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu
Safer ninja star ig.. but be careful can still hurt someone
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
If you want to practice throwing cards, then this is the best thing you can print, the plastic is much stronger than your ordinary playing cards and will not get destroyed as quickly. Its the best solution in my opinion to learn how to…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
You are welcome to decide the name of this print, I frankly don't have a clue. I recommend printing slowly for the best quality. Also, add painted supports to cradle the bottom and the ceiling of the middle of the part to avoid a print…
Wydruk około 1,46 €–1,79 € nettoWstępna wycena jednego wariantu
Introduction This model is a simple spin-off of my Solar System Lithophane Lamp Series . Instead of a planetary lithophane, this lamp is a simple sphere with uniform thickness. Fusion 360 Files are provided and the license is chosen such…
Wydruk około 9,79 €–11,96 € nettoWstępna wycena jednego wariantu
You need this filament to make the dinos https://www.dasfilament.de/filament-spulen/pla-1-75-mm/122/pla-filament-1-75-mm-glow-gruen-v2-800-g?c=11
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Woman with flowing hair to put on your wall.
Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu
EN: With this adapter, an Ecowitt WS90 weather station can be mounted on pipes or railings up to 45mm in diameter using a standard M8 pipe clamp. The adapter has a diameter of 25mm and a recess especially for the WS90 power connection…
Wydruk około 1,52 €–1,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Idee: In unserer Dummy-Trainingsgruppe werden an einem normalen Trainingstag etwa 40 Dummys von 8 Besitzern verwendet. Am Ende werden die dann untereinander wieder getauscht. Das dauert sehr lange, daher wurde eine farbliche…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
This exhaust fan cover aims to free up the airflow from the exhaust fan on the FLSun S1. This might fit the Pro version as well since the chassis should be identical, but I don't have a way to verify for sure. If you are printing in PLA…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Do you have a Kamstrut flowIQ 2200 and want to make it smart? Then this model is a good option! Simple, easy do assemble and mount on top of your existing system without a hustle! Used hardware for mounting: 4pc M3 hex screw 4pc Hex M3x8…
Wydruk około 3,60 €–4,40 € nettoWstępna wycena jednego wariantu
Turned the famous picture of a german soldier on the eastern front throwing a stielhandgranate into a lithophane
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
Motowidło - parasolka do przewijania włóczki. Montowana na stojaku od lampy do selfi (taki znalazłem w domu) Aby złożyć parasolkę potrzeba wydrukować elementy w odpowiedniej ilości. ramię - 24szt spinki - 60szt łącznik 1 i 2 - po 6 szt…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If a hole (flat/breedingchamber) is occupied by an insect on a rotor please replace it and put it under a roof to protect it from rain! You can recycle broken air-spoon-cups, using them stationarely. If it is a non infill-empty…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This coat of arms of the city of Katowice was designed as a tactile graphics for blind people, but can obviously find far more applications. How to print No rafts or supports needed. Print in any scale.
Wydruk około 11,98 €–14,64 € nettoWstępna wycena jednego wariantu
Sensor stand - wh32 Ecowitt Bardzo Fajny stojak do czujnika pokojowego. A very nice stand for the sensor!
Wydruk około 1,01 €–1,24 € nettoWstępna wycena jednego wariantu
Use tree supports on build plate only. The Flowing Pumpkin Lantern is a decorative Halloween pumpkin featuring an unusual organic design made from flowing, intertwined shapes. The open structure creates plenty of gaps for light to shine…
Wydruk około 5,11 €–6,25 € nettoWstępna wycena jednego wariantu
2d art of a woman with flowing hair that sticks to ferrous surfaces. Uses 6mm diameter magnets that are 3mm or less deep.
Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu
Spoon-Fork-Knife Throwing Star for an Our Generation doll (18-in/46-cm doll). Held by fingers in three different orientations. Can be held by either hand. For your aspiring young ninja. Doll can use it to eat, poke her forehead, comb her…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
Kann auch auf größere Windspiel Rotoren aufgesteckt werden! Anbei sind viele Bauteile zum kennenlernen. Die Ziernabe und Handgritt(Säule) größer scaliert, Scalierungsfaktor 4,66, ergibt Gartentisch! Das Innenleben der Säulen ist bei mir…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The gcode file uses a 0.6mm nozzle and 0.5mm layer height.
Wydruk około 2,38 €–2,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bowindi- Perform and enjoy freedom! Ich habe heute alle Rechte bis auf “Gemeinsame Nutzung ohne NAMENSNENNUNG” freigegen! Heute Abend werde ich die besten und schösten Luftlöffelschalen ohne Gravur freigeben. Mit Hinzufügen von negativem…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
case study model i made as an architecture student
Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu
👍 Do me a big favor and hit the Like button! ✨ 🛒 Shopping List WS2812B RGB LEDs (AliExpress) Wemos D1 Mini V3.0.0 (AliExpress) Thin wire 30AWG (AliExpress) Black filament – Sunlu Black Warm white filament – eSUN White‑B Solder tin Cable…
*** You are doing me a big favor by clicking the Like button :-) *** ** Let me see what you have made. Upload a photo in Add make ** Print the letter in black or other non-translucent color. Cover plates "adfekkapje.stl" and diffuser warm…
Źródło oznaczyło ten model jako treść 18+.
Girlfriend needed a throwing knife for cosplaying so this s the result of a that Slice at 0.1mm First layer 0.3mm will give the edge a shiny surface (if you print in 2 pieces) Good scale is at 180% - scale depending on need/build size
A hydroponic growing lid designed for plant propagation, rooting cuttings, and simple water-based growing. The lid holds multiple small growing baskets above a glass, jar, or container, allowing plant stems and roots to stay supported…
hello friends, I'm Vlad-3d designer from Ukraine , I got this idea and I really want to implement it, first of all, this product is aimed at premium materials and I want to implement it as a final product, but I will also share the final…
This is 1:1 replica of JKR523 throwing knife. Original is full metal, but in my opinion 3d printed works just fine. Remember that throwing knives requires lot of practice to master, so don't give up after few tries.
You are doing me a big favor by clicking the Like button :-) Shopping list for use with WS2812B leds WS2812B RGB Led (AliExpress) Wemos D1 Mini V3.0.0 (AliExpress) Wire thin 28AWG (AliExpress) Black Filament - Sunlu Black Warm white…
I've decided to try and model/print as many CS:GO knives as I can. I am trying to get better at modelling in Fushion and this is helping a lot. Any advice or criticism is welcome and appreciated. Let me know if you print it! Print…
FEATURES Previously known as Advanced Nozzle Wiper, this is not just a simple wiper mount - it is a complete rewrite of the nozzle wiper code, with the following features: Adds advanced nozzle wiping functionality to Creality K1, K1C,…
Do pobrania moja wersja powiększonej baterii 3x względem oryginału do Parkside X20V Team, wzorowałem się na wersji dostępnej poniżej jednak samą obudowę zrobiłem od nowa wykorzystałem jedynie wsad na ogniwa 3x… Oryginalne źródło:…
Stormtrooper helmet towing hook cover With this you should be save not to hit anything with your towing hook, it‘s a stormtrooper what should he hit? But if you hit him with your leg, it will hurt. But anyway, it looks cool. Create your…
For model makers (dioramas) see the exciting addition of accessories below This is the standard 155mm howitzer shell in use by the US army since around WWI. This model was inspired by @sbeecroft's models on Thingiverse; this is not a…
If you download the model, please don't forget to leave a like. Thank you! <3 Embrace the mystical allure of Umbreon with our smooth, flowing lines 3D print file. This elegant design depicts the sleek Pokémon in a series of graceful…
This is to support a strawberry plant through growth. put each half around the core plant and as the strawberries start to grow they will rest on the support instead of the ground. Keeps a lot of ground-dwelling bugs off of the fruit as…
I wanted to create something wonderful—something a little magical. And that’s how my Glowing Winter Village came to life! Snow-covered cottages, tiny fir trees, and a winding road climb the hillside, creating a little winter world. With…
Earlier this year I got into growing sprouts. While living in my dorm room at college, I wanted a more convenient way to strain the water from the mason jar and came up with this print. It's a meshed strainer lid for wide mouth or regular…
I designed this Heart of Te Fiti for a kids theater production of Moana. It uses a LED string light with an on/off switch that I had around the house, but can also be purchased online. There's also a necklace holder the heart snaps into…
Printed on my Creality Ender 3 S1 with following settings: Mode: Vase mode Layer height: 0,16 mm Material: White PLA
Źródło oznaczyło ten model jako treść 18+.
These are digital 3D printable models of Miniature Food from across the globe from our magic compass . This pack is part of our All-knowing Magic Compass which you can find on our website:…
These 3D models are faithful replicas of Shurikens, Ninja throwing stars, that can also be used as coasters. [ CAUTION! ] Please be careful not to injure others or yourself, as the shapes of the models are very sharp.
Use this ninja throwing knife to expand your ninja weapon collection.
knife for throwning i think that slim look better
Źródło oznaczyło ten model jako treść 18+.
I designed this model to be an accessory to the Jeep Kit Card: https://www.printables.com/model/791346-jeep-kit-card The model should pe printed without supports and without a brim. I used a 0.16mm layer height.
*** You are doing me a big favor by clicking the Like button :-) *** This heart can be combined with the letters from my other project. https://www.prusaprinters.org/prints/109865-glowing-wled-or-led-all-alphabet-letters-and-all-n…
I was asked if I could make this: https://www.thingiverse.com/thing:1729963 as part of a gift but I wasn't sure where to get the LED module they used so I decided to remix the original model to fit some RGB LED Tealights I bought from…
Remix of https://www.printables.com/model/275117-e3dbuggy-a-3d-printer-stress-test A simple remix that brings the E3D Buggy, the Cali-trailer, and Benchy together. https://www.printables.com/model/275117-e3dbuggy-a-3d-printer-stress-test…
Hello, here is a new version of my "There is a ghost in my house", to put an LED candle in it. ( https://www.prusaprinters.org/prints/30904-theres-a-ghost-in-my-house ) DO NOT put a real candle in it (unless you have very good insurance…
Satisfyingly slow flowing Marble Run to use with tree support only. Steel ball used: 8mm See Video for more details: https://www.youtube.com/watch?v=-zLj6\_tX5aY…
Fun little throwing knife. Works great with 50% infill to give it some weight. Printed at .1mm to keep the detail, but works great at .2mm. Used a few drops of CA to glue together.
I was having a lot of fun with RAWICE511's throwing card, so I thought I'd bring it to Printables! It does make a whistling/whooshing sound when thrown right, but it takes practice. Printing in PETg or ABS is recommended since it has more…
When I saw the "Velcro" Contest here on Printables.com, I thought it was literally a challenge to see who could make the best 3D Printed Velcro! Well, after seeing that's NOT what everyone was doing, lol, I decided to try. Well, I am…
Update : Version 1, printed in PETG, broke when it sagged and the Luba backed into it. Version 2 is easier to print since most pieces lie flat, but the number of parts went up to 8. It's also slightly larger than v1 so cover the Luba a…
Capture the essence of calm and fluidity with this stunning Koi Fish Sculpture leaping from stylized waves. Perfect as a zen desk ornament, home decor piece, or a standout collectible, this model brings grace and motion into 3D form.…
Access pre-supported files & more by supporting me on Patreon!
Simple model of a microgreens planter with various extension like a stackable holder, lid, and sprouting tray. Everything was thoroughly print-optimized. The lid can optionally be separated in slicer and has a hole - for example, use the…
Hi, the main goal of this project is to create a inexpressive robot for the snow with a functional plow. This is an easy to build project. You only need to know how to screw some screw and solder some wire. If you have any questions about…
Simple Kit Card with 10cm, 6cm and mixed plant and growing plugs. Print and cut off. Label your favorite plants.
WARNING: Read the entire post or your print will fail. I love this game. Very few games achieve perfection and this is one of them. I really like the way of life of the Nomai and this bust is beautiful. So I thought this print would be a…
*** You are doing me a big favor by clicking the Like button :-) *** 🔧 Project I have carefully listened to the feedback from the previous versions: 💡 Fewer LEDs than the 100 mm project 🔤 Bold, sturdy letters 🔗 Stronger links between the…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a fun throwing toy with 4…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
I like to call this Knife the "Space Cowboy Bowie Knife", but i didt think that was a descriptive enough name for search bar If there are any knife designs, other tools, or cosplay props that fit my profile style. please message me an…
Classic American towing truck with non hydraulic towing system with movements. You will need some kind of thread to finish the assembly. I am very thankful to Mr Benoît Lussier for his feedbacks which has helped me refine the model…
I explored many of the other designs out there and generally wasn't satisfied with what I found for my application. I wanted something that brought the filament purge waste closer to the front of the printer, while minimizing the side…
Print Settings Supports: No Layer Height: 0.2mm Infill: 15% --- Use variable layer height for best results on the blade. Finish with a black paint wash to highlight the design on the handle.
I wanted to print a large-ish Honeycomb wall on my Ankermake M5 (a 235x235 bed-slinger). Searching around, I found Honeycomb Storage Wall for 235mm^2 print bed by @sbufe which is best sized for the M5, but I also wanted borders/edges. So,…
Do pobrania moja wersja powiększonej baterii 2x względem oryginału do Parkside X20V Team, wzorowałem się na wersji dostępnej poniżej jednak samą obudowę zrobiłem od nowa wykorzystałem jedynie wsad na ogniwa 2x… Oryginalne źródło:…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the M777 howitzer, in use by…
I added a rounded version as the first one was a bit to pointy and sharp for training/mock purposes. It is 0.25" holes for the sheath. I suggest grommets, but you can use whatever you want. Works amazing, a tad tight for the real sheath,…
its a star, but it doesn't shine. It hurts.
A Family Friend is an avid Rower with an Olympic rowing boat for competitions and wanted a model of his boat, so here it is. Based on the Swift Racing 111-821 mould that he owns.
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
This is a ninja throwing star. Recommended slicer settings: 0.12 mm layer resolution, 3 walls.
Hop up chamber copy of Prowin with little improvements - longer protrusion for magazine 0,5 mm longer - wall where is thread from side is 0,2mm increased because printer cant print soo thin wall -wall of main tube in front of chamber unit…
This is ment to be printed with glow in the dark filament. It can proivde more realistic look of a night sky and planets. Print instructions Use hardened steel nozzle for glowing filament. Planets: Scale it/cut it in your slicer to fit…
Sehr stabile Version eines Hydro Tower's für 6 Pflanzen pro Modul, die Module incl. Bodenplatte werden untereinander mit Edelstahl Gewindestangen M6 verschraubt um der Konstruktion noch meht stabilität zu verleihen. Als Wasserbehälter…
Ein eleganter Osterhase in einer fließenden, wellenartigen Form – ein wunderschön abstraktes und modernes Design. Das Modell lässt sich ganz nach euren Vorstellungen skalieren und kommt ganz ohne Support aus. Frohe Ostern und viel Freude…
This is a set of models to grow cat grass hydroponically in a standard or wide mouth canning jar. Want to keep your new cat grass upright, despite your cat's best efforts? Check out this companion print - Base for a Canning Jar…
Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high. https://www.prusaprinters.org/prints/149829-glowing-led-and-wled-all-alphabet-letters-and-all- You are doing me a big favor by clicking the Like…
Its a clasic throwing star / shuriken.
You want to use your smartphone on a Concept2 indoor rowing machine, and not ruin your posture while doing so? Now you can! As a rowing coach I did not like it when my rowers put their smartphone on the handlemount, because it makes them…
This is a dual-color model I made. It's highly versatile; you can use it as wall décor, table décor for the kids' room , or anywhere else. Use it for anything your mind can imagine. Hope you enjoy Hey everyone, first of all, it would mean…
A backup weapon for the LUCKY 13 that I remixed from the sword in LUCKY 13 Update 4/13/2022 Relieved that I made the handle twice as long as needed so I re-worked the model to a smaller size
This detailed snow-covered winter cabin brings a cozy, festive atmosphere to any space. The house features a classic log-style design with snow-laden roof details, balcony, porch, and surrounding pine trees. The interior is hollow and…
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. The throwing knife has…
A model of the Apex Legends throwing knife, made by me in Blender. There are low poly(unbeveled) versions of the model, which are my recommended method for editing the model, I.E. for a remix. There are also beveled versions, meant to be…
A bold, collectible-style bust of music icon David Bowie, inspired by his legendary Aladdin Sane persona. Sculpted with a smooth, clay-like finish and striking lightning bolt detail, this piece blends clean lines with exaggerated features…
I split it into parts in F360 to make it printable without using AMS. I printed it out of PETG and Bambu PLA Glow Blue. Eyes, tongue painted (can be painted through AMS anyways) The glowing circles fit in the holes well without glue, but…
Its a throwing star / Shuriken with 6 prongs.
