Wyniki wyszukiwania: p32

ESP32-CAM Case

Has cutouts for illumination LED and camera, as well as buttons on the side for the two buttons on-board.

esp32-case

OpenSCAD sedigned case for the esp32 development board. Thanks to Sergio Vilches for the rounded corners!

ESP32 Devkit V1 "Chunky" Case

ESP32 Devkit V1 Case w/ Snap-on lid with button detents and cutouts for USB, LEDs and pin access. This case is thick enough so that the pins are completely shielded inside the case, though accessible for connection. IF you want a version…

ESP32 D1 Mini Case

I was inspired to design this ESP32 D1 Mini case after writing a blog about using the ESP32 D1 Mini and ESPresense to incorporate room-specific presence detection in my Home Automation . After using someone else's design, I thought it'd…

ESP32 case for ESP-WROOM-32D

I made a remix to fit my ESP-WROOM-32D because the ESP won't fit with the original case. I also changed the fittings a little bit so that it can be easy reopened.

ESP32 Devkit V1 Case

Case with Snap-on lid. Lid has detents for buttons. Case has cutouts for USB, LEDs and pins will stick out of back of case. If you want a version of this case where the pins are fully shelled/enclosed - see:…

ESP32 CAM Mount

Small and quick to print camera mount for the ESP32 Cam. This mount uses the pins of the esp board to hold the board. The pinholes in the corners are snugger, to secure the board in place. Additionally, the 5v and gnd are left open for…

Enclosure Case for ESP32 2.8 inch Display (ESP32E) – Base + Lid (cheap yellow display)

Two-part 3D printable enclosure case (base + lid) designed for the ESP32 2.8 inch display module (ESP32E). Features a screen window on the lid, ventilation slots, USB port cutout and screw posts for assembly. Footprint 96.4 × 60.4 mm.…

ESP32-Camera arm-mount for MK3/MK4 and other 3030 aluminium extrusions w/ t-nuts

This is a pre-arranged and pre-supported collection of all necessary parts to print a case for the ESP32-Camera with a side-arm mount on the 3030 Extrusion of the MK3 and MK4, and t-nuts that don't need disassembling of the printer to…

Freenove ESP32-Wrover CAM Mount - Prusa MK3 & MK4

A remix of mhparsons Prusa camera mount. The cable channel has been modified to accommodate a usb cable - this does unfortunately mean it needs multiple supports. The included g-code file has supports painted on in all the necessary…

MK4S RPi/ESP32 Cam Mount

ESP32-S3-EYE mount for the case used in this tutorial for the Prusa MK4S. You can use a spare M3x18 screw to mount the holder. It might work with older versions but it's not tested. The case used is…

ESP32 Wroom Case with Sensor SHT31

Simple Case for ESP32 Wroom with SHT31 Sensor with honeycom Lid No Glue and no Screws needed Just plug it together, you just need to solder the ESP32 and SHT31 To put it on the Wall you need only double-sided tape. The Sensor should be on…

2 Axis Camera Magnetic Mount for Freenove ESP32-WROVER

This model lets you mount a Freenove ESP32-WROVER board (buy from their global site or Amazon ) in your enclosure and use it to automatically upload images to Prusa Connect. The mount provides two degrees of freedom to adjust the aim of…

Pen Plotter ESP32

This is a simple 3d printed pen plotter that broadcasts a wifi network with web server that fully houses the whole interface. So anyone with wifi and web browser can use the device. The plotter runs custom firmware on an ESP32 and serves…

ESP32 S3 XIAO case - web cam

This is a housing for a XIAO ESP32 S3 cam for a Prusa XL. Print out all parts according to your color preferences. To assemble the case, use some glue and glue the joint ball part to the bottom of the case. Then stick a suitable magnet…

Keltec P32 Magazine Speedloader (and P3AT)

Speedloader for the 32 acp and 380 acp magazines for the Keltec P32 and P3AT. Slide it over the top of the magazine, press it all the way down, place a round, let up on the speedloader, then slide the round all the way back. Repeat. Print…

ESP32 PN532

Ich wollte beide Platinen zusammen in einem Gehäuse haben, also habe ich ein Gehäuse dafür entworfen. Auf die Erhöhung passt perfekt der PN532 Ich habe es so konstruiert, dass der ESP32 zwischen den Stiften liegt und nicht angeklebt oder…

OpenDTU Housing with 1,3 Zoll OLED, ESP32 NodeMCU and NRF24L01+

A minimalist housing design for OpenDTU, providing component visibility and accessibility for maintenance Additional components: 1,3 Zoll OLED display ESP32 NodeMCU NRF24L01+

NodeMCU v3 ESP3266 Case with Sensor Slot

A snap-on case for a NodeMCU v3 that has slots for USB charging and sensor wires. Designed to fit DuPont connectors attached to the NodeMCU's pins. This was my first basic case for my DIY Home Assistant setup. I use it hold SHT3x-D…

DFRobot Beetle ESP32 Case

See also the FreeCAD File if you would like to change something.

Keypad with Display Case (ESP32 S2-Mini)

A handheld case for an ESP32 S2 Mini with 1602A LC display and a 4x4 matrix keypad. There is a lot of space if you'd like to add a battery. Display, S2 Mini and the case should be screwed together with melt-in M3/4mm threaded inserts. The…

esp32-case with countersunk mounting screw hole

This is the Mihai esp32-case, but with a countersunk mounting screw hole added to the base. I borrowed the hole design from https://www.printables.com/model/275743-parametrised-power-strip-mount-with-rounded-corner

Deep Rock Galactic Flare with inserts for ESP32 18650 BluetoothWifi

A model of the flare from Deep Rock Galactic. The model has several components that can be printed in different colours. Additional Required Parts: ESP32 DevBoard “TTGO T-Energy T-18” or similar “18650 Battery" for the DevBoard “WS2812…

ESP Home IR-Receiver (ESP32 CH340 KY-022 IR Receiver)

Hi! I use a simple IR-Remote to control some of my smart-home devices and automations using home assistant. I built this little IR-Receiver using an ESP32 (CH340) USB-C Board and a KY-022 IR-Receiver. Both very inexpensive components. I…

ESP32 CAM case

The cover is made for the Ai Thinker ESP32-CAM module. The front covers for the camera are equipped with many holes for better cooling. In the closed version, the temperature on the base plate is very high. For the magnetic holder, I used…

ESP32Cam Watermeter Case

Simple case for AI on the edge watermeter using ESP32Cam. See documentation . I fixed the baseplate with double-sided tape on top of the watermeter.

Neoden YY1 6xESP32

Magnetický držák pro modul ESP32. Do spodní části vložíme 2ks magnetu (stejný jako používá Prusa v podložkách na tisk)

PBB8-0147 & ESP32 Arm Mount for LucidVR Gloves

A arm mount to hold the cheap PBB8-0147 powerbank found at your local Five Below or on Ebay. Oh, and the ESP32 itself! Intended for the LucidVR VRGloves to power the unit without adding extra weight on the hand and wrist. Designed to…

Mounting bracket Freenove ESP32-S3 WROOM CAM for PRUSA XL on PRUSA XL Enclosure

Mounting bracket Freenove ESP32-S3 WROOM CAM for PRUSA XL on PRUSA XL Enclosure Software for camera: https://github.com/prusa3d/Prusa-Firmware-ESP32-Cam/blob/master/doc/Freenove%20ESP32-S3-Wroom/README.md#flash_fw flashed under Linux with…

Mini+ esp32Cam and LED light mount

Inspired by rPI camera mount projects, this one mounts an esp32Cam and usb socket, dimmable led under the X-axis motor. Wiring back to Rpi 5v power bus and gpio controller relay for OctoPi controlled light switch via Enclosure plugin.…

Snug case for ESP32-CAM

I designed a case how I needed it for my setup. The ESP32-CAM fit very tight on all side in the case. There are shims on the front and back cover so no movements are possible in any direction. The back pins are also completely inside the…

esp32 breadboard pusher

small device which helps to push a stuck ESP32-S3-DevKitC into the breadboard Print settings: PLA 0.2mm speed presets 3 perrimeters 25% gyroid infill

Squeezelite-box for ESP32

It uses an ESP32-WROVER for reliable Wi-Fi streaming and a PCM5102 I2S DAC for superior audio quality. Display: The ILI9341 screen shows essential information like the Artist , Album , and Song Title metadata. Control: A Rotary Encoder is…

Case for esp32-eth01 with custom pcb

Case for esp32-eth01 with custom pcb link for custum pcb for esp32-eth01 https://www.huizebruin.nl/product/esp32-eth01-ethernet-pcb-scr-con-01/

Solar - Camerastation for an ESP32 Cam

Camerastation for an ESP32 Cam with a solarpanel and button for battery charging. With the right programming, it could be controlled via web browser, your smartphone, etc. I recommend printing it split in half!

esp32cam mount for nozzle ender 3

ENG you will need 2 types of Double-Sided Tape, I use 3M VHB 4910 12mm Deli-E30407 Double-Sided Tape with the "E30407" you need to tape the "triangle" to de esp32cam board and cam with the "3M VHB 4910" you tape the esp32cam to the "body"…

ESP32 Camera Mount for MK4

Since I started using PrusaConnect, I have been playing with the idea of using an ESP32 Cam for remote monitoring. After some searching, I found a software solution or description for integrating the camera into PrusaConnect. See…

ESP32-WROOM-32 (USB-C) Box with Lid

ESP32-WROOM-32 Box (USB-C) A small box with snap-fit removable lid for the ESP32-WROOM-32 development board. Pins are still accessible from the underside via two slots. Please note this is for the 28mm x 52mm (approx.) PCB, this is the…

ESP32 Case

If you want to support my work, just buy me a coffee: paypal.me/predypavlovic Case for ESP32 dev board No screws required Ventilation openings Can be mounted without unplugging the circuit board Includes housing with and without pin…

CASE ESP32 2432S028 USB-C Module - Cheap Yellow Display (CYD) / CYD2USB

Basic case for USB-C version of the ESP32 2432S028 2.8" module, also known as Cheap Yellow Display (CYD) / CYD2USB.

ESP32 C3 Super mini MODEL

ESP32 C3 Super mini 3D MODEL - .STEP - .f3z

ESP32 camera case

This case is intended for the Articulated arm mounted on the Original Prusa printer.

ESP32 C3/C6/H2/S3 Super Mini Case

A basic case for ESP32 Super Mini boards. Lid clicks in place quite firmly. With optional pass-through for wires. Most Super Mini boards have 18x23 mm dimension, some are slightly longer. 23mm and 24mm are available here, use the OpenSCAD…

ESP32 Cam Case

I got inspired by https://www.printables.com/model/286528-cam-case-for-esp-32-wifi-cam Unfortunately, the files that come with it are unusable and thus I started to design my own. The whole assembly is a tight fit to ensure a good…

P320 M18 Blue Gun/Red Gun/Training Gun

Minecraft Ore Lamp (WLED / ESP32 D1 Mini USB-C)

A Minecraft Ore Lamp powered by a USB-C ESP32 D1 Mini and a WS2812B LED Ring , running WLED for full RGB lighting control. Bill of Materials The lamp was designed to perfectly fit the following components: USB-C ESP32 D1 Mini from…

Enclosure for Sunton ESP32-2432S028R Cheap Yellow Display

This is an enclosure for the Sunton ESP32-2432S028R development board widely available from Ali Express, Banggood, Amazon, etc. The cost on Ali Express is only about $8 USD. The board includes an ESP32 WROOM-32 module and a 320 x 240 2.8"…

Everything Remote - ESP32 Powered Universal Remote

🎉🎉 PARTS KITS ARE NOW AVAILABLE HERE 🎉🎉 Build your own universal smart remote! This project turns a simple ESP32 and tactile buttons into a powerful, battery-powered remote for Home Assistant — perfect for media control, lights, scenes…

ESP32 Case

The original had some odd open space so I closed that up. It should snap fit but if not a little piece of tape or a dab of glue will do. This is my favorite case for ESP32's that don't have anything connected to the pins.

ESP32 2.8inch Touch IPS CYD LCD Screen Case

ESP32 2.8inch Touch IPS CYD LCD Screen Case I recently purchase this screen from Ali Express. It has a very unimaginative name "ESP32-2432S028R" which makes it hard to find. For that reason it is also known as the Cheap Yellow Display CYD…

Teyleten Robot ESP32-S3-WROOM-1 Case

This case fits the Teyleten Robot ESP32-S3 Development Kit sold by Amazon… https://www.amazon.com/dp/B0B6HT7V7P?psc=1&ref=ppx_yo2ov_dt_b_product_details This development kit has two USB-C connectors without the pins soldered to the board.…

ESP32 Cam housing

Housing for ESP32 Cam modul (Tinker board) Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0,2 Infill: 100% Notes: After printing you can use female breadboard connectors with the plastic…

ESP-WROOM-32 ESP32 Case

Case for ESP-WROOM-32 ESP32. The lid snaps on without any screws or glue and has openings for pressing the buttons with a paperclip. The base is deep enough to keep the headers on the board, although I de-soldered mine. There is an…

ESP32-WROOM-32D Dupont Case

This is designed to hold an ESP32 with pin headers soldered on and allow you to use dupont connectors with it. As the filenames imply, this was built with the ESP32-WROOM-32D in mind, specifically the one from HiLetGo. The main components…

Presence Sensor Case - ESP32 C3 Super Mini + LD2410C Radar mmWave Sensor for smart home

Update 1: Small optimizations to the casing Added a small groove for lifting the lid Added some space inside on the back for potential cables Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini…

Case for ESP32-C3 SuperMini and LD2410C

Please comment, rate, and post a make! Update 2/1/2024: I've added a new back with a ball joint to give better flexibility with printing a single back for multiple mounting options. A simple case for using an LD2410C radar sensors with an…

ESP32-Devkit case

I'm using these esp32-devkit boards as ESPresense sensors: https://www.amazon.co.uk/gp/product/B08LGNV6V6 I just wanted a box I could put them in so I didn't have bare electronics around the house, and I couldn't be bothered ordering some…

P320 FCU (airsoft)

100% Accurate Frame Model (for airsoft)

esp32-cam OV2640 focus adjustment wrench

I'm adding a tool for fine-tuning the focus of the OV2640 camera module. Currently, I have designed a bracket only for the first 3 commonly used lenses for the OV2640. Support for OV8225 camera lenses will be added in the future. WARNING!…

ESP32 DEVKIT V1 BOARD 30 PIN

ESP32 DEVKIT V1 BOARD 30 PIN: STEP F3D PARAMETRIC MODEL: USB C OR MICRO USB B WITH PIN OR WITHOUT PIN

XIAO Sense Case (Seeed Studio XIAO ESP32S3 Sense, Camera)

WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the PETG versions of the case) which has…

Seeed Studio XIAO ESP32C3

🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO ESP32C3, an Arduino & CircuitPython capable RISC-V board with Wi-Fi, Bluetooth and USB-C that comes with an antenna and costs $4.99. The product page for this device can be…

ESP32 Cheap Yellow Display (USB-C version) Enclosure (ESP32-2432S028R)

Remix of the enclosure designed by @mdkendall for the ESP32 Cheap Yellow Display (ESP32-2432S028R) found on Aliexpress & similar sites. Model adjusted for the USB-C board version, which does have slight variations of the connector…

ESP32 dev-module 3d model

This 3D model of the ESP32 WROOM-32 development board is slightly enlarged for better 3D print quality, capturing key details like the ESP32 module, pins, surface-mount components, USB Type-C connector, reset/boot buttons, and mounting…

Seeed XIAO ESP32-S3 Case

Updates 13/07/2024 - Added bottom with holes 05/10/2023 - Added filet to the case ---------------------------------------------------------------------------------------------------------------- Case for Seeed XIAO ESP32-S3. Used STEP…

ESP32 CAM Rover with robotic arm

Modified stair climbing rover to carry a robotic arm. Mounting is in the lower frame, servos are rotated 90°, covers and frame have cutouts for the robotic arm. The ESP32 CAM with external antenna is mounted in the top cover, through…

Esp 32 Gehäuse esp32 case

Ein einfaches Schutzgehäuse für den Esp 32 mit dem Vorteil das die Pinout Belegung noch ablesbar ist.

Waveshare ESP32-S3 7inch Capacitive Touch Display wall mount case

You shoul use a 4 M3x10 screws to secure a screen to the case.

Case for Sunton ESP32-2432S028 2.8" TFT-Touch Board

This is a small protective case for the following Sunton board: ESP32-2432S028 Note: You'll need 2x M3*4 bolts to attach the PCB to the casing. If you are looking for additional electronics projects, checkout the following page:…

ESP32-S3 devkit

Model of the commonly used ESP32-S3 devkit to be used when designing cases, devices, etc.

ESP32 CAM Case With Tripod Mount

Remix of the ESP32 Cam case by mojocorp . I really like their design, however I wanted the following. Printable without supports Room for Dupont connectors Tripod mounting hole Increased rear rim thickness The shape of the original looks…

Holder/case for ESP32-C3 with OLED display

I needed a small case for this particular ESP32-C3 board offered with integrated OLED display on AliExpress. I use it as a cheap, tiny display with ESPHome and Home Assistant to present small amounts of sensor data directly at the…

Seeed Studio XIAO-ESP32-S3 Case

This is a simple case for the Seeed Studio XIAO-ESP32-S3. It has an option with an extra plank that you can stick the external antenna onto. The lid snaps on without any screws or glue. This is an initial model for basically the device…

ESP32 DevKit V4 Case (OpenScad)

I couldn't find a ready made case for the type of ESP32 I had ordered, so I made my own. This fits a 38 pin version of the ESP32-Wroom-32D with built-in antenna, labelled DevKitc V4. There are two versions of the body: a thick version…

Sól: OpenDTU (ESP32 / NRF24L01+) case

I created a small case for my ESP32 / NRF24L01+ setup running the awesome OpenDTU software to monitor my Hoymiles inverter. The case was created to just fit the components I had available. It has space for a 46 mm x 59 mm circuit board…

3D Model for Seeed Studio XIAO ESP32C6

Seeed Studio XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and…

ESP32 DEVKITV1 ESP32 WROOM Case 2 in 1

This case can be used to store or actively use ESP32 DEVKITV1 or ESP32 WROOM The bottom holes are to push the ESP32 Board out of the socket. Also ,the top can be mesh for better heat dissipation. NOTE : For the version with buttons use…

ESP32-Wroom Box

ESP32 Wroom Box Close with snap clips (press fit) Please be sure about the ESP32 board size: 26x52mm Different manufacturers have different board sizes. BENEFITS: Fast to print Easy to use Small & Strong Designed for FDM Printing Smooth…

ESP32-WROOM-32U Casing

ESP32-WROOM-32U Based WiFi Repeater Utilizes the ESP32-WROOM-32U module for powerful WiFi repeating capabilities. Enhanced signal strength with an external antenna (IPEX connector) for optimal performance. Firmware based on ESP32 NAT…

ESP32 NodeMCU Dev Kit C Case

Simplistic case for esp32 (devkit c). It has a snug fit for the esp, pin and usb breakout and lets you easy remove the esp board. The case itself is meant to be glued together. The purpose was mainly for my private projects, but I wanted…

Heltec ESP32 Lora V3 Case

I took the previous model and updated it for the newer USB-C connection and made room for an antenna on the case.

Smallest possible ESP32-CAM

The ESP32-CAM enables you to build a complete webcamera and is available from under five bucks! Here's some great info from someone on youtube https://www.youtube.com/watch?v=MicAM_A0_lU There are a bunch of ESP32-CAM cases available…

ESP32 Cheap Yellow Display (CYD) Enclosure with Pen Holder

I loved the original design, but I wanted a holder for the little touch pen that came with my USB-C CYD. Here's the result! Requires 2-4 M3x6 screws. Socket-head fit flush, but others will still work. I'll add an adjustable 2020 extrusion…

ESP32 Case

I got myself some ESP32 to use as a bluetooth proxy in Home Assistant and needed a case for them. The ones I found online were not really what I was looking for or weren't for the board version I got. So I designed a case myself. It is a…

Gridfinity ESP32 Holder

Just a simple gridfinity bin for storing ESP-WROOM-32 devboards. You can download the STL if you just want to print it easily, or the negative stamp if you want to replace the base gridfinity bin with a different version (like one without…

ESP32 Project Enclosure with OLED SSD1306 0.96"

Made a project box for the ESP32 WROOM (although most ESP32 boards have the same form factor), with a lid for the 0.96" OLED screen. It houses multiple access points for wiring, and a small 10mm slot for the touch sensors. I use a folded…

ESP32 38 pin breakout board case (snap-fit lid)

Designed this case with a snap-fit lid to fit a 38 pin ESP32 breakout board, you'll find these all over aliexpress/ebay/amazon, etc. The case has symmetrical cutouts to access the terminals on either side, so you can mount the board in…

ESP32-WROOM-32 (USB-C) Box with Lid, Trimmed

Snap-fit closure for ESP32 board, with pins available for prototyping purposes. This remix of the existing model removes the material between the pins inside the box. Printed beautifully using Inland PLA+ with a 0.5mm nozzle at a 0.28…

Meshtastic Seeed Studio XIAO ESP32S3 & Wio SX1262 case

This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…

ESP32 CAM case / enclosure / mount using modular mounting system

Fits the AZDelivery ESP32 Cam Module Board. There's a good chance other branded boards also fit. Snap fit enclosure Enclosure has holes for the ESP32 cam board pins to hold it in place Use some glue or double sided tape to attach the…

Scout32 ESP32 WiFi FPV Camera Rover

Due to the large number of files, they are archived in zip format to preserve folder structure. Notes, Fixes, and things I forgot to include in this release. I forgot to include the decorative cab plating in the ScoutXL files. Please use…

ESP32-WROOM-32D Dev Board Model (Parametric - Fusion 360)

I needed this to design a case for a WLED board so thought I'd upload it for others. It's Parametric (has parameters you can change for every measurement) so you can easily tweak it for your specific board. Hide the aerial if it doesn't…

Snap-fit case for Seeed Studio XIAO ESP32S3

Snap-fit case for Seeed Studio XIAO ESP32S3 UPDATE: Added STEP file for the model for future improvements and modifications by the community. Please respect the CC Attribution Non-Commercial license. Features: Snap-fit case, no additional…

ESP32-CAM with ESP32-CAM-MB Housing

So I bought a few ESP32-CAM & ESP32-CAM-MB boards with those cheapo 3MP OV2640 lenses for simple uses, such as seeing when the mailman comes. If you'd like other options than the simple example code offers from the Arduino IDE and SD card…

Slim case for ESP32-C3 Super Mini

This is a slim case for ESP32-C3 Super Mini Development Board. Ideal case for a small Home Assistant Bluetooth proxy. This is designed specifically to fit these ESP32-C3 Super Mini boards I purchased from AliExpress based on the board…

Roomy ESP32 Enclosures

There is plenty of ESP32 board enclosures out there, but most of them are quite streamlined/minimalistic, which is fine but I set out to buid an enclosure with a little more room in it so you can easily use breadboard jumpers instead of…

ESP32 Cam Mount

With this small camera holder you can mount an ESP32CAM directly together with the lens and align it freely. In my case, I mounted this bracket in the housing above my 3D printer to monitor the printing. The module is very inexpensive and…

Case for ESP32-2432S028R (AKA Cheap Yellow Display)

I needed a case for the CYD (Cheap Yellow Display) that was thin enough to use 180° USB adapters. The existing cases was too thick so I designed my own one. The case have a cutout for the RGB LED on the backside and “buttons” for the…

Internetradio YoRadio esp32

EDIT5: Added speaker membrane left, right boxes and panel. I divided this boxes to box and panel to print it without support and Both boxes have closed box space and on back panek hole for passive mebrane 3". it improves bass…

ESP32 16x2 LCD LoRa Case / Enclosure

Please hit LIKE on my design if you download it so I get credit, thanks! This is a counter top enclosure designed to hold a 1602 LCD display run by an ESP-32 processor. There is also a spot for a LoRa transceiver. Fits these parts: ESP32:…