Liczymy pasujące modele…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need 12 cylindrical neodymium magnets, Ø8mmx3mm…
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
Small part to improve the Plexiglas's hold. Plexiglass thickness 3mm Mounted in the middle on the feet and under the tabletop
Easy to print separator for your kitchen cabinet pull-out drawer so that bottles or anything else is not flying around when you open and close the drawer. The side rails are for 14-15mm thickness. The plexiglas must be 6mm. There is a…
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
!!! This model is still in progress - I am adding new models/info !!! ------------------------------------------------------------------------------------- Background/What is it? In my leasure I like building simple cabinets, wardrobes,…
I edited the back corners from the “Ender S1 Pro ENCLOSURE” by LWdesign (https://www.printables.com/model/509715-ender-3-s1-pro-enclosure-remix-ikea-lack-table), so you can use Plexiglass on the back instead of PVC. The Plexiglass has the…
Simple base to instal humidity sensor on 3mm Plexi. Printed from PLA with small suports
Used on a Lack Enclosure build to hold plexiglass in place. Beveled edges to allow sliding the plexiglass into place.
Schlichtes, mechanisches Prinzip: statt schrauben, bohren oder riskieren dass die Scheibe reißt, wird das Plexiglas einfach geklemmt. Dieser Halter nimmt 3 mm Acrylglasplatten spielfrei auf und fixiert sie sauber an Rahmen, Holzplatten…
Bottom corners from Original Prusa i3 MK3 ENCLOSURE without slots for plexiglass: G-code for PLA
Small part to improve the Plexiglas's hold. Plexiglass thickness 3mm Mounted in the middle on the feet and under the tabletop
Redesigned from start the door handles so they look similar but fit magnets in a way the magnets are merely inserted into the parts, no need to glue or tape them. Also I bought wrong size magnets so I had to improvise.
Use supports during printing 0% infill 4 walls for a 0.4mm nozzle
Instead of an enclosure, I ordered a plexiglass box with the exception of 1 face, to be used as a “cover” for my mk3s on an Ikea LACK table. However, I quickly realised I had trouble taking the box off without sliding it to the side - and…
DESCRIPTION: This is a quick and easy fix for the Prusa MINI LCD being exposed to potential damage. A small piece of plexiglass or acrylic can be used to cover the screen and prevent damage to the panel while keeping all the usability of…
Randprofil mit 45° Winkel für eine 19mm Tischplatte zur Befestigung einer 5mm Plexiglasscheibe oder Sperrholz und einem Ständerfuß 25x25mm. Ich habe das zum Bau eines geschlossenen Gehäuses für meinen 3D Drucker entworfen. Die Tischplatte…
The design features a transparent top with untreated droplet-shaped gaps, symbolizing the reduction of complexity, and a solid metal base engraved with "3D Printing Industry Awards." Inside the base, intricate wave patterns represent the…
This is for transparent sheet with 0.45mm thickness (actual measurement) The table is Galant from Ikea. Because I did'n want to ruin my table I put some silicone feet under the support to keep it “clipped” to the edge of the table Build…
!!! This model is still in progress - I am adding new models/info !!! ------------------------------------------------------------------------------------- Background/What is it? In my leasure I like building simple cabinets, wardrobes,…
teste sa fonctionne pour moi pour aller avec : https://www.printables.com/model/488753-flsun-v400-enclosure-door
NackHabitat #0054 - PlexiBox You could take my #1 favorite food in the whole entire world, put it in a take-out box and stash it in my fridge, and then say "Nicholas, this is the last cheesesteak on the planet. There are no more after…
rail sections for a sliding plexiglass door system. i printed this for the enclosure for my printer to be able to have access to the printers. I made the slot 7mm to accommodate 3mm plexiglass or PC sheets and have a little room to slide…
I designed this part to accompany a small drilled hole in a sheet of plexiglass. The model is fully parametric and can be adjusted quickly and for free by using the spreadsheet within the FreeCAD model file. By default it is designed to…
vorder Seite den Träger entfährnt,und durch ein Plexi (210mm*20mm)ersetzt
I saw the original infinitely adjustable picture frame and thought that I could make it work using some of the cardboard I had laying around. I modified the amount of space in the model so that it was wide enough to fit a piece of…
finishing border for ikea furniture. support for plexiglass plate. STL and 3MF files ! free to Remix !
I decided to design my own enclosure. The goal was to make it as little visible as possible. So, plexiglass and prints! Originaly designed around the Prusa i3 MK3, but this ended up being customizable in terms of size, as you can make the…
All the parts of the original model that hold or clamp on plexiglass panels have been edited to fit 2.5mm panels instead of 3mm.
I printed it with 0.2 layer height 0.4 nozzle 5 walls 100% infill tree support . Happy printing.
Pin to mount the Plexiglass platter to a Audio Innovations amplifier. Suitable for models 500, 700, 800, 1000, First & Second. Pin is designed from an original by my good friend HJ. ;-)
Every collector of miniatures, scale models or LEGO kits knows that their hobby items attract dust like a magnet. Cleaning dust from miniatures becomes a tedious job, and probably the best way to avoid it is to protect your collection…
The hinge for the plexiglass door is mounted on a V-slot (recommended 40x20) and is fully adjustable along multiple axes. The hinge operates very smoothly. I used 6mm plexiglass for this project and 40x20 V-slots. The knob I used is this…
Eckverbinder für Gehäuse mit 5mm Plexiglas... M4 Senkkopfschrauben Corner Panel Joints for Housing with 5mm Perspex
There is a lot of dust in my worshop so I wanted to have a simple solution to protect my gridfinity sorting system. I came with this part that you can glue to a 2.5mm thick plexiglass to cover you bins and avoid to have a mixture of…
I attempted to make the holes for a 4MM bolt to self-thread. but failed so I'd change that if I were you. The holes are a little bit too wide for a 3MM (barely catches) and too tight for 4MM (won't start a thread)…I drilled mine out to…
Kalibrovat otvor průměr 8 pro čep 2x. Zapuštěné šrouby M3 4x a šrouby M3 2x (vhodné délky) Vrtat a zapustit šrouby M3 do plexiskla. (Pasovat nepoškrábat plexisklo !)
For this project you'll need some plexiglass around 355mm x 245mm (they usually sell them at 12"x16" online) I used 1/16" thick, around 1.5mm and some short m3 nuts and bolts, I think I used ones that were 6mm long To cut it up, I used a…
Providing my own design of plexi glass (3mm thick) enclosure, very simple design. Still can be improved, but works well. M3 screws with nuts for hinges and M6 screws with pre-made thread. Hinges that are used: Hinge by Josef Průša
This allows you to use the Ikea Pax as a display case, and maybe more specifically, just single shelf. This is print has an inner and outer part, and requires you to embed magnets. The inner part goes into the peg holes on the side of the…
Enclosure corners for plexiglass mount. 2 woodscrews holes to attach on ikea lack (or custom made), 1 prepared M5 nut hole.
Clip to hold 2mm plexiglass to sides of Replicator 2/2X openings. Category: 3D Printer Accessories
Connector printed from ASA material in a quantity of 10 pieces. Printing time 2.5 hours. Fill 40-50%. Nozzle height 0.2mm.
I needed a way to mount orange acrylic to my laser cutter enclosure. The linear bracket would have worked, but I like the idea of having a corner for strength. Can be screwed in with 3mm screws or glued to the surface (like I did). If two…
Remixed Prusa Enclosure parts for 2mm plexiglass It's hard to find 3mm plexi near where I live, so I remixed necessary parts for 2mm plexiglass (which is way cheaper too) Fitment is quite tight, my caliber measured 1.94mm. This might also…
I edited the back corners from the “Ender S1 Pro ENCLOSURE” by LWdesign (https://www.printables.com/model/509715-ender-3-s1-pro-enclosure-remix-ikea-lack-table), so you can use Plexiglass on the back instead of PVC. The Plexiglass has the…
Inspired by @SierraGolf solution Kallax Display i decided to come up with a different version without screws and using TPU for the corners because i had problems with fitting other solutions. Parts needed for each window: plexiglass 333mm…
Simple base to instal humidity sensor on 3mm Plexi. Printed from PLA with small suports
A bit of a different take on the plexiglas shelves. I wanted something that can stand on its own without any screws, bolts or using tools. I also decided to make it more decorated just for fun, using an art deco pattern I saw on some…
Hinge to attache to Plexi Glass. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Category: DIY
Wallmount for my 8 mm Plexiglas, which I put into the open window when using the mobile ac. All files oriniented as I printed them in PLA with just a Brim. Wandhalterung für meine 8 mm Plexiglasacheibe, die ich ins offene Fenster klemme…
i build a enclosure with 4mm MAKROLON® for my creality ender 2. The corner holder are assambled IN the case to hold the plexiglass with m4 Srews. All holes are 4mm and have a 10.2mm embossing for neodym magnets I decided to make 2 sides…
Description This model serves as a spacer insert for plexiglass clip frames. It is intended for situations where the puzzle dimensions do not match the nominal frame size and a gap appears between the puzzle edge and the metal clip. When…
Simple but with challenging curvature filament guide throught plexi. I spend some time to make curvature good for filament and in the same time to print without overhangs. Maybe helpfull for someone. I use it for filament guide with…
Used on a Lack Enclosure build to hold plexiglass in place. Beveled edges to allow sliding the plexiglass into place.
Created this simple, 2-part design for illuminating IMAX film cells in plexiglass frames purchased from the jungle website. Designed around 12mm wide WLED strips for extra effects when not directly viewing, but ultimately compatible with…
Simple hinge for plexiglass Top in 3 versions: 1mm 2mm 3mm Bottom in 2 versions: without screw with screw ( M3 20mm ) Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 10-20
Plexiglass hinge v2 ( 2-3mm Plexiglass ) M3 30mm screw M3 nut or M3 30mm screw M3 threaded insert Updates: Add Part 2 with small tolerance for better movement Add Part 2 with tolerances and bigger width Add Part 1 for M3 threaded insert…
Schlichtes, mechanisches Prinzip: statt schrauben, bohren oder riskieren dass die Scheibe reißt, wird das Plexiglas einfach geklemmt. Dieser Halter nimmt 3 mm Acrylglasplatten spielfrei auf und fixiert sie sauber an Rahmen, Holzplatten…
Bottom corners from Original Prusa i3 MK3 ENCLOSURE without slots for plexiglass: G-code for PLA
This is one of my favorite ball pyramid puzzles. It was designed in 1976 by Leonard Gordon. For many years, Kadon Enterprises sold this puzzle made from injection molded clear polystyrene (see the photos). These puzzles are no longer…
This Dry Box mod for the Core One (+) filament spool recess area includes a plexiglass cover with an integrated hygrometer. The cover attaches to the Core One’s steel frame with magnetic tape, no hinges. Two desiccant holders are mounted…
I made some corner brackets for my plexi-glass NAS case. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.28 or better Infill: 15-25% Filament: 3D Solutions PLA Whatever You Want Notes: No…
This rounded clip holds Optix 0.09" plexiglass vertically, and is intended to be screwed to plywood. This is currently being used on an overhead HO scale model train track, to prevent derailments from becoming something truly horrific --…
Redesigned from start the door handles so they look similar but fit magnets in a way the magnets are merely inserted into the parts, no need to glue or tape them. Also I bought wrong size magnets so I had to improvise.
[EN] Clamp-Style Heavy-Duty Hinges I designed these hinges specifically for my 3D printer enclosure. I needed a solution that could support significant weight without requiring me to drill holes into the plexiglass panels. Key Features:…
Use supports during printing 0% infill 4 walls for a 0.4mm nozzle
Made this for my own use but feel free to modify it as you please. I used 4 perimeters and .40 nozzle and .20 layers with Prusament Galaxy Black PETG on a MK3S+.
I've modified the original IKEA Lack joints to remove each plexiglass individually for printer maintenance. This is useful if you have couple printers stacked on top of each other and you need to do some maintenance for the bottom one.…
Simple corner brackets to mount a piece of acrylic sheet to the wall to use as a dry-erase board (whiteboard)
Leg for glass, board, plexiglass with a thickness of 4mm and 6mm. There is space at the bottom for an anti-slip rubber.
Acrylic Knife is a compact and ergonomic 3D-printable handle designed for cutting and scoring acrylic sheets using a standard acrylic cutting blade. The handle provides a comfortable grip and precise control when making straight scoring…
Acrylic Knife is a compact and ergonomic 3D-printable handle designed for cutting and scoring acrylic sheets using a standard acrylic cutting blade. The handle provides a comfortable grip and precise control when making straight scoring…
I designed this magnetic clasp to originally work for the LACK enclosure compilation by Woody1978 although I suppose it could be used on anything really Using standard ~2mm plexiglass and M3x8mm socket cap screws the two halves perfectly…
use 15 percent gyroid infill i used petg its recomennded for aquarium use no supports needed if printed like on the photos
This is kinda a test at uploading, I have not printed this yet. I'll update this in a few days once i get my printer. I'll add additional connectors once I test this one. This is a corner for building a plexiglass or acrylic enclosure for…
This is a simple mount to add a 2mm thick backsplash, such as a piece of acrylic/plexiglass, to the Ikea Fjallbo laptop table. Uses a friction fit for the backsplash piece itself, and optionally has a 6mm hole to secure the backsplash…
If you have a problem to find 3 mm plexiglass for Prusa MK3s Ikea Lack Enclosure, you might be able to get a 2.5 mm version - so here you have a remix of Prusa Enclosure parts for 2.5 mm plexiglass. Parts, which didn't need to be edited,…
A friend needed a hinged holder for a 0.1" sheet of plexiglass. I decided to challenge myself to design a complete holder that could be printed all at once and without the need for supports. Print Settings Printer Brand: Monoprice…
Hello, This is my first design made in Tinkercad :-P Works super fine! My filament spools kept dragging on the lower part of the spool holder :-( So, I designed this adapter to adjust the height of the spoolholder spindle ;-) Enjoy Cheers…
Modified hinge for holding plexiglass with holes to securd (you can drill plexiglass). Also modified where the hinge will make a 90 degree angle with edge securing base of the hinge. Printed in PLA will print on Prusa Mini+ 15% infill is…
Mount for 2mm plexiglass. Plexi wedges into the clip and then use a screw to attach it to whatever Category: Household
This is only a remix of an existing model from thingiverse. Camo6126 has done a very cool door for the X-MAX which used 8mm plexiglas in order to get an better view of the first layer with a fully closed door. later he did a version for…
I didn't need a fully enclosed cabinet but I wanted to use 3mm plexiglass. I remixed the fusion file from oa1 and gave the holder a 4mm width. This keeps the plexi secure but also allows you to slide it out easily if you need to clean or…
Based on: https://grabcad.com/library/coronavirus-flu-reusable-mask-1 Print instructions Updated with better screw holes and the possibility to attach over-head stripe.
This is a latch to close an IKEA Lack enclosure, it works by rotating the top part and is kept in place by a ball and grove. I used 4.5x35mm woodscrews and a washer to put it in place. Double sided tape prevents the lower part from…
I'm living in France, and buying fancy stuff like rectangular magnets of a specific size and plexiglass of 3mm is nearly impossible and quite expensive. So I decided to create my proper enclosure, made of wood, melamine plated mdf and 4mm…
Work In Progress. Designed for 4 or 5mm plexi glass. Insert 4 sheets of plexi (with UV coating) and glue in place. Update May 2nd: Added thinner top lid (v2) for faster printing time. Category: 3D Printer Parts
The LACK V2 enclosure has fairly significant gaps between the legs and side / rear plexiglass panels. I couldn't find a good set of trim pieces to fill the gaps, so I designed slide-on skirts with a friction fit. Once installed, they can…
