Liczymy pasujące modele…
10" Rack Mount Bracket Ethernet Switch TpLink 8 port Flat version – Use this if you don’t have space issues between rack units (you can print this model horizontally); Standard version – Provides extra inter-unit clearance. Choose this if…
PUMP-ACTION PLINKER: (TOY LAUNCHER) This the most functional and fun launcher I have made to date and I am very excited to share it with you all. Requires a couple of springs and a handful of M3 hardware to make functional! Currently…
Plinker V2.0 (Bolt-Action Blaster): Designed in FreeCAD V 0.21.0 Printed on a Bambu Labs P1P The second entry in my shell-ejecting plinker series. The V2.0 features a bottom loading magazine and functional rails for mounting accessories,…
Folding dice tower with dice box to hold one set of standard sized polyhedral dice. No supports needed. Slight trimming of Tray required on the flat circles near hinge. 8mm Screws are the hinge for lid and tower Nuts, M3 | [QTY 15] Bolts,…
This was just a random idea for me to design and is a way to keep my skills fresh and improve upon them over the summer. edit: I added a new stand to address problems Note that it was a rush job as this was my 1st day of collage :p
The camera for the P1P and P1S is mostly useless and is more of a time lapse still camera than a video camera, this allows you to use a tapo C100 for a real time camera and still keep the built in camera. It mounts on the glass for the…
1U rack shelf for 8 port ethernet switch tl-sg105 print settings: 15-20% infill 0.2 layer height
model je jako držak na strop pro přístupovy bod (WiFi Access Point) montaž samotného držaku pomocí samořeznych šroubu pozor držák jde namontovat pouze jednou stranou!!!
A simple mount for the Tapo C110/C100 camera that uses the screw connection of the hinge. There are 8x3mm magnets embedded to support it, these can be used optionally if there are slight noises. Printed with normal support for the magnet…
SUB-PLINKER (Plinker 2.5): The Sub-Plinker is a compact, low-power shell ejecting blaster with printed projectiles. The design was heavily inspired by the Kriss Vector submachine gun and the Ticon pistol from Cyberpunk 2077. This is a…
Printed in PLA with .15 layer height and .4mm mozzle on a Voron Trident 350mm. Filament used is iiidmax Fluorescent Green PLA+. This adds a little bit of marble mixing when adding marbles back into the hopper. For a future design update I…
Just a simple disc with the treble cleft. Pause the print to change filament colors. I can model up a CNC router plinko board if there is enough interest.
This set of models will allow you to mount this 5-port switch vertically (flat) against a wall using household fasteners. The first model is for hanging the switch body. This is a snug fit, but does not cover the front ports. This allows…
Support pour switch keepLiNK (KP-9000-9XHML-X) pour rack homelab 10"
Plinkodrop - Tabletop Marble Run A simple, mechanical tabletop plinko game designed for your desk. Drop the marble at the top and watch it bounce through a grid of triangular pins, funnel through the side ramps, split around a center…
Switch link: KeepLINK 9 port 2.5G network switch To use this design you require 4 M3x6mm screws. The bracket attaches to the switch by using the M3 threaded holes that keep the sheet metal case together. You need to unscrew the short m3…
Easy wall mount using screws or other fasteners. I printed this flat-side down, using PLA with three perimeter walls and 10% infill. Easy print with no supports required.
We had our new internet installed and needed a little shelf to place the main Access Point/Router, hence this model. Printed in white PLA at 10% infill,
I needed a panel for my 10" rack, I decided to combine my USG and MC220L. They fit perfectly, but you can add zip tie or double tape for more security. It's a long print, almost 10 hours ! Print instructions Print in PETG or PLA.
Print with the wing on the bed.
After using my old dice tower for over 2 years, I had some ideas for improvement. This new one features a print-in-place hinge design Low walls on the tray ensure that your dice are easily readable after a roll During play, use the…
I modeled this because i had come across the Printables contest for musical instruments. unfortunately it was 2 days before deadline. If you print the Key mech upside down, you can fit all parts on a 220x220 printer with ease, very little…
Vertical stand for the TP Link SG105 switch. If your printer is perfectly accurate this should be a decently tight fit. Very stable with a small footprint. Also included a cut out notch as it appears the SG105 has air vents on the sides…
See photos. Print with support. I used snug and 4 mm pattern spacing. Worked really well. 0.2 mm Layer height Two versions 0deg and 90deg. With respect the desired position of the camera you should choose the one that suits best. With the…
This case is pretty tight, probably size it up by a little bit if your printer isn't super accurate (like mine). the 2 part version is much easier to print, due to not needing to sand down the supports. If you like my things, money is…
A holder for a TPLINK CPE210 device. The CPE210 is designed to attach to a pole. This holder can be screwed to a surface and then the device just sits inside it with the ethernet cable sticking out of the bottom. Note that the CPE210 is…
Pretty simple mount for a TPLink Tapo C100 camera that has holes spaced for the spool holder on the Sovol SV06+, and studs for the screw holes on the camera itself. It'd probably fit on the SV06 but don't have one to test - post a make…
All you need are: friends, fridge and a lot of beer!! (also a 3d printer) All the parts mount 5x3mm magnets. for the pin you need 3 magnets for the esge you need 2 magnets for the finish element 1 magnet for the trasparent panel I used an…
TPLink TL-SG608E Multiboard mount
My base pistol that launched an entire pistol ecosystem. Long, Medium, and Compact versions - buy the appropriate hardware kit. Printed magazines are in the files or compatible with modified nightingale magazines or unmodified AIT 40 max…
Deprecated This is a sturdy 1U mounting panel for 10 inch server racks fits keepLiNK 8 Port 2,5-Gigabit LAN Switch. Mounts with regular M6 cage nuts. Material PETG, PLA Layer height any (I used 0.2mm) Raft nope Supports nope Infill 20%,…
This is Peplink 1U Rack Bracket Compatible with : Peplink 20/30 (BPL-021) Peplink 30 LTE (BPL-031-LTE) Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA Model Rafts: No Supports: No Resolution: 0.3 Infill: 60 Filament: 3D…
Plastic holder for toplink. Kunststoff Halterung zum Oberlenker. Fendt 600 Favorit.
This instrument is 90 percent recycled material, and sounds good. https://youtu.be/xrYg9vbiBfM A glockenspiel or tubular bells is a percussion instrument consisting of pitched steel pipes cut in lengths to produce notes. The glockenspiel…
Added mounting holes for Underware / Multiboard snap connectors. Underware: https://handsonkatie.com/underware-2-0-the-made-to-measure-collection/
A holder to mount USB hub to wall
Rack Holder for 19 inch Server Racks. Useable vor TPLinkSwitches.
The OpenSCAD file (TPlinkCameraMount.scad) reads the existing 3DSourcerer STL file (TOP CORNER FOR TP LINK.stl) and drills the hole and forms the slots. The result is the STL file (TPlinkCameraMount.stl). A snapshot of the slot is shown…
A compact holder for TPLink TL-SF1005D Switch that can be mounted on any wall or under desk.
Help make a decision just number your choices 1-5 and let the plinko decide.
I wanted to prop my plinky up, so I hacked this thing together. enjoy! Print top side on the bed, tree supports slim critical areas only, 15% gyroid works fine, print at 100% infill for a great weighted solid feel
This model is built as a functional desktop game rather than just a decorative board. The peg spacing, puck size, scoring area, side guides, stand, and drop lanes are designed together so the finished print can actually be played. The…
Print it with the screw holes on the build plate, no supports required. I used ABS, but inside a house any filament should be fine.
I recently bought a (very nice) Cotic droplink frame, but was missing the OneUp chainguide part. Not to worry though, I have a 3D printer :D --- I based my design on a mock OneUp model found here , but redesigned it from the ground up to…
I also added a left turn and right turn file since the original was one way only.
I switched from my Wyze V2 Camera to a TPLink C100 as it has better support for RTSP and doesn't need to use a USB port so I needed a mount to hold the camera. The socket from @MrNeedlemouse was superior to other sockets I tried so I…
A DIN rail mount (35mm) adaptor for the TP-Link TL-POE150S Gigabit PoE Injector . I printed in PLA without infill (perimeters and top / bottom walls set to 2mm). If you find my designs useful, you might consider buying me a coffee . But…
1U 10'' Rack Mount Tplink 8 Ports Network Switch
You can use it to attach access point at angle to the wall
A cover for a junction boxe to be used to lock in place a tplink rapo C500 cam (or any cam with those holes). the project is open source, the freecad file is downloadble. Cap width: 132 mm Cap height: 108 mm Box hole width: 80 mm Box hole…
https://www.printables.com/cs/model/335788-tp-link-deco-m4
FULLY parametric Fusion360 model to hold a TPLink N300 travel router ( this one ) to a 2020 rail. Includes mount as well as a cover. These routers are a great way to get WiFi to an otherwise Ethernet board like a Duet 2 Maestro, which was…
I printed this with PETG. Its what I had loaded. 10% infill. works like a charm.
wall mount for deco m5 i recommend tree supports
TPLink Archer X53 Feet for wall mounting via double-sided tape
Mounting bracket for TL SF1500D
I created a supplementary mount for Tapo C520WS for hiding its cables away nicely for ceiling mounting. There is ample space to put all the white cable that comes out of the camera and an additional hole to let your ethernet/power cable…
Mounts a Peplink BR1 Mini (any model I think) to openGrid via 2x vertical MultiConnects. Should work on either regular or lite openGrids since it slots onto multiconnect. Pre-made supports included, just snap them off after printing.…
Cam mount for the Sovol SV04 Y Rail to mount a TPLink C100 IP camera. Mounting is done with a M4 bolt and T nut.
Remix of 3 different models: https://www.printables.com/model/1121786-grandstream-ht801-ht802-mounting-bracket https://www.printables.com/model/427461-10-inch-server-rack…
Simple 1u racking plate for the omada short stack that I run. Used M6 bolts and nuts to connect the two pieces, as they are commonly used in racks already. The two TPLink devices are friction fit.
Fillable target made for plinking. Target has a hollow center with fill hole on top.
This is a surface mount bracket to mount a WaveShare LCD over a TPLink smart switch
📦 Description Keep your network setup clean, compact, and professional with TPLinker, a custom-designed case that neatly houses both the TP-Link TL-SG108 (8-port) and TL-SG105 (5-port) gigabit switches side-by-side in one sleek enclosure.…
Made this to 'sidekick' for an existing model for rackmounting HP Elite desk mini's ...sorry only the right side :/
New customer had 14 inch patchcabinet installed from Gigamedia the Sobox line ………. Since we couldn't find any parts parts like trays, the only switch we use that fit was the SG2210MP And the only some what proper solution was too make…
This model allows you to mount a TPlink AP to a ¼" threaded rod should you need to drop it down a bit. It attaches to TPlink's existing mount using #8 machine screws. Mount was designed for TPlink APs but their mount is designed to work…
Magnetic CoreOne WebCam Holder! Parts needed for assembly: 1x TPLINK TAPO C100 2x Magnets: 6*2*20 mm .Print in place! .PLA Tested
Summary I needed another way to mount the TP-Link media converter on a DIN rail other than using a zip tie. I found that https://www.thingiverse.com/thing:725188 was suitable but needed to be specific to the networking hardware. To add…
I love PLINK s, been using them for years. But they're so hard to manage, they either stick in the case they come in, or all jump out and try to escape. If you've got the same little annoyance, print up the dispenser. Needs no rafts,…
The TPLINK TFC311B20 does not have a Wallmount option. So here is one. I heard this TP Link Model is requiered in some areas.
Holder for TPLink UP525 25W 5-Port USB Charger
I made this for mini dice 15mm. It still uses M3 screws and nuts. It does need an 84mm x 100mm x 2mm plexiglass sheet for the front. I've also removed the dice holder section because I have dice holders and didn't need that part. I made…
I am running a 3 node Proxmox HA cluster. I planned to use the "Improved Thinkcentre Tiny 1U Rack" ( https://www.thingiverse.com/thing:6375095 ) remixed by @TheDuffman85 from "Thinkcentre Tiny 1U Rack" (…
This model was made to elevate the S4 mesh routers from TPLink by half a centimeter from the desk/cabinet, to be able to run cables under them, as well as to keep the ones in the kitchen elevated in case of running water etc. Can be…
Impresora: Core One + Boquilla: 0,25 Altura de capa: 0,15 Relleno: Giroide 10% Paredes: 3 Material: ELEGOO Rapid PLA+
Vertical 10/19 inch rack mount for TPLink TL-SF1005 and similar switches. Fits also similar switches with dimensions: 100mm (width), 25mm (height), 98mm (depth). Two versions with cable organiser, and without. Print it as shown in the…
mount uses 2x M3 screws with nuts; original Prusa XL enclosure - the holes are also original; my print settings are only a suggestion; ASA, 2 perimeter, organic support - user selected,
A holder I made in freecad for my TPLink WR802N. You can download it and change the screw hole size to your liking. Note: The license on this project means that if you remix it, you MUST use the same license. DO NOT remix without…
To install the ligths is necesary to cut the uper shell cover, Is possible with a motor tool or with metal scisors.
A table-top drop game: lean the board back on its two legs, drop a marble in at the top and watch it bounce down through the pegs into one of the scoring slots. Take three drops each and add up your score. Great for parties, school fairs…
This slip-on pole mount can be used with either a UniFi AC Mesh AP (UAP-AC-M) or a TP-Link Omada Outdoor AP (EAP110-Outdoor or EAP225-Outdoor) for use on a 1.5" speaker pole. The fit is loose for easy no-tool mounting for a temporary…
tplink ax3000 router stand its a special stand for my new router . i can finally attach my router properly to my skadis panel.
Although I have not tried them, the hole versions use less filament and should be just as good if not better due to ventilation. If I had to pick one again before printing I would use the triangle version as that minimizes overhangs.…
I remixed multiholes file to add a wall panel and a slot for the cable. This is intended to be used when running wires through walls when mounting your EAP610 on walls or ceilings. I added rounded corners on the wall panel part and for…
10" Rack mount for KP-9000-9XHML-X MokerLink 2G080110GSM both have the same dimensions height: 28mm width: 175mm depth: 73mm
The TPLINK TFC311B20 does not have a Wallmount option. So here is one. I heard this TP Link Model is requiered in some areas.
Plinko Tube Dice Tower This is a dice tower inspired by Plinko mechanics. It's designed to provide fair, random rolls while being easy to print on most 3D printers—no supports required. Dice dropped into the funnel bounce off internal…
I made this for mini dice 15mm. It still uses M3 screws and nuts. It does need an 84mm x 100mm x 2mm plexiglass sheet for the front. I've also removed the dice holder section because I have dice holders and didn't need that part. I made…
Switch link: KeepLINK 9 port 2.5G network switch To use this design you require 4 M3x6mm screws. The bracket attaches to the switch by using the M3 threaded holes that keep the sheet metal case together. You need to unscrew the short m3…
Impresora: Core One + Boquilla: 0,25 Altura de capa: 0,15 Relleno: Giroide 10% Paredes: 3 Material: ELEGOO Rapid PLA+
Summary I needed another way to mount the TP-Link media converter on a DIN rail other than using a zip tie. I found that https://www.thingiverse.com/thing:725188 was suitable but needed to be specific to the networking hardware. To add…
A cover for a junction boxe to be used to lock in place a tplink rapo C500 cam (or any cam with those holes). the project is open source, the freecad file is downloadble. Cap width: 132 mm Cap height: 108 mm Box hole width: 80 mm Box hole…
A plinko style dice tower designed for d&d. It's open faced so you can see the action, but the dice won't fall out of the angled pegs. See how it works here: https://www.youtube.com/watch?v=sI64v1gKJUo During play it assembles to provide:…
**Note: I never printed/tested this. See the note below for an explanation. For my newer designs that I did print, see https://www.prusaprinters.org/prints/10121-dice-tower-and-organizer-plinko-style and…
Plinko Tube Dice Tower This is a dice tower inspired by Plinko mechanics. It's designed to provide fair, random rolls while being easy to print on most 3D printers—no supports required. Dice dropped into the funnel bounce off internal…
This is a quick print of a replacement SIM cover for Peplink BR1 Mini Print with the notch and screw hole on top, using supports for both. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.15…
![CoreOne Magnetic WebCam Support [ TPLINK TAPO C100 ]](https://media.printables.com/media/prints/ee9937cd-35d9-4e50-ae4c-a35043c39608/images/10175967_70e52221-5961-4624-bf67-268062f2c189_d5592770-4552-4c95-ae33-c52fd67c6e94/img_5281.jpg)
