Liczymy pasujące modele…
Standalone case and optional display stand for use with a framework 16 mainboard and display. The display stand utilizes the built-in mounting points on the display, enabling simple but sturdy mounting. The original mainboard case model…
The inner section of the dome is modified to improve printability
halloween tree I'm kinda being silly but I thought I'd take a stab at a “ fixed” remix of the original. Technically the hollow original might be handy for resin printing but your slicer software can do that too. I think that cleaning…
I fixed a few issues I had when printing the original by "frmdbl": Strengthened the prongs at the top by attaching them to each other with a ring, so it doesn't bend too much during printing and ruins overhangs. Thickened the bottom cone…
Standalone case and optional display stand for use with a framework 16 mainboard and display. The display stand utilizes the built-in mounting points on the display, enabling simple but sturdy mounting. The original mainboard case model…
Remix All credits go to the original author, license is the same. This remix is more durable and easier to print. I cut off the sharp corners in the finger slots since attempting to print super sharp features result in fragile parts.…
My bigger printer with 0.6mm nozzle struggles with thread holes as in this model. Cooling issue most likely. Reshaped the thread hole so it prints more cleanly.
Minor modifications to lego-like accessories for giant lego wreaths Adjusted internals and transition angles for ease of printing/additional depth for assembly, added “LORGO” text to top of stud Based on these items:…
Hole diameter is 19mm good for ½" EMT from home depot which is 18mm OD. Recommend to print in ABS or PETG. Added also a compliant based clamp for the pipe which worked better for me and holds more tightly without a screw violently pushing…
This shaved version of the screw allows it to be printed as one piece in the ideal orientation while mitigating blobs on the top surface. Print with the larger flat side down (refer to photos) Print with 3 perimeters or more Print with 0%…
I recommend setting perimeters to at least 4. This will keep the surface clean on the inside of the bin. Print Settings: Prusa XL 0.6 mm Nozzle 0.32mm Structural, Input Shaping No Elephant Foot Compensation Filament: 3D-Fuel ASA 255°C…
Original Description Holds 10 rolls of bags and has screw holes to be wall mounted, or use two sided tape/Command Strips to attach. Bag rolls are about 30mm in diameter and 61mm wide, so this dispenser might work with others. Initially…
This is a remix of nfoster262's Boeing 747 , which is highly detailed but has some very weak parts when printing. I added internal material to reinforce the engines, outer engine mounts, and vertical tail control surfaces. I recommend…
A simple, articulated, and print-in-place T4 bacteriophage modeled after the real-life attachment process of a bacteriophage, with legs that bend to allow the phage baseplate to reach the cell surface. A great desk toy or learning tool…
The inner section of the dome is modified to improve printability
Imho the original opening pattern is a bad choice for good printability. I have reverse engineered the original casing (Shell r3) and changed the opening pattern so it is printable without supports. I reduced overhangs as much as…
I would recommend printing this with your extrusion multiplier bumped down one or two percentage points.
halloween tree I'm kinda being silly but I thought I'd take a stab at a “ fixed” remix of the original. Technically the hollow original might be handy for resin printing but your slicer software can do that too. I think that cleaning…
I fixed a few issues I had when printing the original by "frmdbl": Strengthened the prongs at the top by attaching them to each other with a ring, so it doesn't bend too much during printing and ruins overhangs. Thickened the bottom cone…
I took a liking to this wheel case, and decided I'd correct the primary complaint other people had - the thin walls affecting printability. Print settings are the same as Jacob's original project, I would perhaps suggest using PCTG, as…
A small mod of pcwzrd13's Crazy Taxi arrow to remove the need for supports under the string loop. I printed it in PETG pointing upwards, 0.4mm nozzle, 0.25mm layer height, 4 walls, no infill, w/ supports. You might need to tweak the…
Remix All credits go to the original author, license is the same. This remix is more durable and easier to print. I cut off the sharp corners in the finger slots since attempting to print super sharp features result in fragile parts.…
Btw, you can do this yourself easily by clicking on the model in your slicer with all the parts in one stl and then click split into objects and then left click on each one and then just click export as one stl and repeat the process.
Remix of the original to allow printing the bins without support. Printed in Polylite ABS on CORE One, other materials should work fine.
This is a remix of VanessaE’s model, which is itself a remix of Calamari’s original model. This version takes the simplification one step further, prioritizing printability, durability, and easier handling over accuracy, without ever…
I flattened the base of the claw for better adhesion, and re-oriented it to remove the need for supports. PS The symbols on the Gold claw are not correct. They are actually for the Emerald Claw. - thanks to TacoScientist for pointing that…
/////////////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150 ///////////////////////////////////////////////////////////////////
I printed these parts a few dozen times and made changes along the way to make the parts print right / prettier / consistent / match my assembly preferences. No stl files here, print using the 3mf file. All the mods were done using…
I modded the great design by DaGov to accomodate for bowden fittings I had laying around (from my Voron-Projects) as well as improving printability. The only part I changed is the back extruder part. The remaining parts can be used from…
Adding a cylindrical portion without increasing the overall height to increase printability.
The ‘sharplock side handle’ part of that balisong models has the problem which can occur the bad print quality at the bottom of the print result when go printing without any other post-processing. So I applied simple tricky way to make…
I slightly modified the bearing, I made a little chamfer on the bottom and on the top to make it much easier to use it straight away rather then remove the edge on the bottom. I didnt want to have the chamfer too big becasue I want to use…
I removed the small inner parts from the text on the spool, so the printer doesn't have to print those small parts on the first layer. Especially usefull for bigger nozzles. Original:…
Estes 2003 SDI Satellite Kit Nose Cone modded for printability Should be the original scale. separated into pieces and threading added. no support needed I print with 3 top 3 bottom 0.2mm layers 2 walls 5-10% infill (as light as you can…
Really liked the OG model from rtj, but tweaked it slightly to allow for a cleaner print orientation.
Added mouse ear to Pinda sensor and Pinda screw hole is filled due to cracking problems.
This model improves on the printability of the original model by András Bognár : Added a cross on the bottom that significantly improves the strenght of the peg. I could break the original with my finger, there's no chance that happens…
This is Calamari's model, but with some changes done to make the model easily printable without supports. I started with Calamari's model because it has such nice detail in most of the model. In particular, each of the four minarets has…
All parts are 100% compatible with original model. All parts are printable with 0.2mm layer height. 1_main_housing Removed the bottom fillet with extreme overhangs and replaced it with a less steep chamfer. Reduced back of the arm motor…
Remix of the model: 65922-silica-gel-spool-container I modify the number of holes for better printability and stiffness.
there are 2 styles of vent, the original shape by Simon Jin, just made a bit easier to print. and my addition of a inner ring that rotates slightly easier. be aware once its pressed in, it is pretty permanent. the inner ring also has…
I loved the Idea of the Open Ball V1 but I found it a bit hard to print because it required a lot of support and cleanup. So I did a few changes: All parts are now printable without any supports. The Workholder now fits on the ball…
This is a remix of this: https://www.thingiverse.com/thing:2999507 I just made some of the overhangs more printable while maintaining the aesthetic. Will print then upload photo. For this type of model I recommend variable layer height if…
![Skyrim Dragon Claw [improved printability]](https://media.printables.com/media/prints/192164/images/1786079_8aa72619-5f92-466c-9a64-627303046a56/abd3bfabd2f6f1685f666f3cd719b3eb_display_large_19.jpg)
