P
PrintablesEverydecentnameistaken
"Cable puck" print-in-place cable management
Fully print-in-place cable management winder for usb/headphones etc.....
- Pobrania
- 7315
- Polubienia
- 1409
- Ocena
- 4,63
Wyniki wyszukiwania: puc
Liczymy pasujące modele…
P
PrintablesNAM_3
Bouncy Puck
This is a puck that glides across smooth, hard surfaces and bounces off of walls. To be clear, this is not an iceless hockey puck. It is simply too weak to handle the force of being consistently hit by a hockey stick. It instead can be…
- Pobrania
- 3528
- Polubienia
- 1315
- Ocena
- 4,9
P
PrintablesShaun
Hockey Puck
I could not find a standard-sized hockey puck so I made one myself. Infill could be adjusted based on your age and the use of the puck. Print Settings Infill: 100 Supports: None Layer Height: 0.20 Material: Any
- Pobrania
- 2615
- Polubienia
- 78
- Ocena
- 5
P
PrintablesJulien Mairy
Brainrot ballerina cappuccina
Brainrot ballerina cappuccina
- Pobrania
- 2298
- Polubienia
- 78
- Ocena
- 4,5
P
PrintablesAJP10304
Puck Game
Each player has 5 pucks and has to ping them through the hole to the other player's side. First to do this wins. Print instructions Prints fine in 0.20mm quality. Add supports for the board, for the puck hole.
- Pobrania
- 1580
- Polubienia
- 554
- Ocena
- 4,83
P
PrintablesSPP
Seeed Studio Sensecap T1000-E charging cradle/puck
Change log 2025/01/01 Added STEP and Fusion 360 source files. 2025/12/08 Added v10, only change is 5mm taller walls NOT for commercial use, if you want to sell these please get in touch. The charging cradle/puck prints with no supports…
- Pobrania
- 1330
- Polubienia
- 151
- Ocena
- 4,94
P
PrintablesWith_Maltodextrin
Print-in-place cable winder "puck", no supports necessary (uses slicer trick)
Inspired by Everydecentnameistaken's cable puck from earlier today, I quickly threw together a similar puck that includes an easier to grip ... grip, and uses the one-layer-high slicer trick rectangles to print easily without supports. (…
- Pobrania
- 1262
- Polubienia
- 215
- Ocena
- 4,9
P
PrintablesVector Connections
Samsung Wireless Puck and Smartwatch Charger Stand
I had an old Samsung Wireleless puck I wanted to start using to spare my USB-C port the stress of being used daily. There were two or three available but all of them had significant problems and didn't suffice in my needs. This model…
- Pobrania
- 1227
- Polubienia
- 29
- Ocena
- 0
P
PrintablesPeter Farell
Ballerina Cappuccino
Ballerina cappuccino Meme. uv upscale Illara on huggingface.
- Pobrania
- 1183
- Polubienia
- 51
- Ocena
- 0
P
PrintablesJA:GR
Ice Hockey Puck
The ice hockey puck was missing in my games collection. Model is scaled down to the diameter of 4 cm. The Czech company Gufex is proud producer of the best ice hockey pucks in the world - www.gufex.cz.
- Pobrania
- 1154
- Polubienia
- 49
- Ocena
- 5
P
PrintablesThe Kit Card Guy
Flexi NHL Hockey Puck Buddy
Summary Easy-to-print and without supports printable buddy in the form of a hockey puck. I hope you like it! Requires only 15g of filament (single color)! You find a blank version for own customization of this buddy here . Print no…
- Pobrania
- 1015
- Polubienia
- 116
- Ocena
- 5
P
Printablesrstrong
Quadlock compatible Puck
Puck base for attaching a Quadlock case to something else, no STL provided as this was designed to be used as a base to modify to fit whatever mount you need.
- Pobrania
- 863
- Polubienia
- 77
- Ocena
- 5
P
Printablescjr222
Hockey Puck Container
You are able to print both with the flat surface down as is with no supports. I was able to add a multicolor inlay with my club's logo in the top with just a single nozzle. I will include the Fusion 360 design if you want to attempt…
- Pobrania
- 843
- Polubienia
- 83
- Ocena
- 5
P
PrintablesCosyMaker79
Cappuccino Assassino Ninja
A coffee with a killer instinct! The Assassin Cappuccino Ninja is a one-piece 3D model designed to impress with its stealthy warrior style. Perfect for multicolor printing (AMS/MMU compatible), it's a fun and original figure for your desk…
- Pobrania
- 799
- Polubienia
- 34
- Ocena
- 5
P
Printablesdash8521
Hockey Puck Stand Display
Tabletop or shelf display for your hockey pucks. Designed to showcase the puck upright and with as little distraction as possible Should be ok to print with as little as 5% gyroid infill. No supports necessary.
- Pobrania
- 793
- Polubienia
- 120
- Ocena
- 4,89
P
PrintablesDLQFPV
MagicBand+ Puck watch band holder
I designed this adapter for my wife's MagicBand+ after seeing similar items online for the OG Magicband. Made specifically for the MagicBand+. Print in TPU. I print strap side on bed with supports. That way the hidden side has supports
- Pobrania
- 785
- Polubienia
- 89
- Ocena
- 5
P
PrintablesRaptor_50_Titan
Air Hockey Puck / Pucks
This is a replacement puck for the Sportscraft Air Hockey Table. This is modeled after the original round Power PUCK by Sportscraft. My original puck measured 71.90mm in diameter or 2.83 inches and 5.5mm thick. Additional puck shapes are…
- Pobrania
- 746
- Polubienia
- 20
- Ocena
- 5
P
PrintablesChris Vahi
Cable Puck Remix
Remix of Everydecentnameistaken's cable puck with an added rib on the bottom for better hub constraint, 2 pieces for multi material use, better overhangs and wider gap on the first layer Print instructions No supports needed.
- Pobrania
- 716
- Polubienia
- 81
- Ocena
- 5
P
Printablesjonathon717
Fancy Espresso Knock Box - Puck Catcher
A fun project I spent a lot of time tuning. I'm a metal worker so this was a challenge for me to design the smooth shapes. The Design Goals: An offset knock bar Professional look Low overall price Printable After many revisions this is my…
- Pobrania
- 711
- Polubienia
- 247
- Ocena
- 4,67
P
PrintablesDesing.stl
Capuchino Assasino
This is character art for Capuchino Assasino , an Italian-themed coffee character. Inspired by the famous Italian drink, this "Cappuccino Assassin" is ready for action! He's depicted as a coffee cup with ninja gear: headband, mask, and…
- Pobrania
- 705
- Polubienia
- 21
- Ocena
- 4,25
P
PrintablesWill Maker space
Hockey Puck
This is a is a simple design of a hockey puck that I made that can be used for street hockey, mini sticks, knee hockey or whatever activity you desire. I printed it with 5 walls and 4 top and bottom layers with high infill and found the…
- Pobrania
- 700
- Polubienia
- 23
- Ocena
- 4,33
P
PrintablesSkewed Perception
PAX Puck Press
A handy device for pressing bricks of ground flower for your PAX 2/3/Plus vaporizer. There's an original version from the vape manufacturer for the same purpose, but that one sucks: it's extremely brittle and breaks after not that many…
- Pobrania
- 634
- Polubienia
- 67
- Ocena
- 4,86
P
PrintablesDee Tech
Air Hockey (Puck & Striker)
A good indoor game activity which can be played during lock down situation while maintaining the social distance. Felt fabric can be added on a striker base by adhesive like hot glue gun to play smoothly.
- Pobrania
- 614
- Polubienia
- 39
- Ocena
- 5
P
PrintablesOliver
Stained Glass Grinder Puck
Use the Grinder Puck when pushing glass into the grinding wheel to save your fingers from being cut by the edges of the glass that haven't yet been ground smooth.
- Pobrania
- 602
- Polubienia
- 80
- Ocena
- 5
P
Printablesbykim
Espresso Puck Screen Holder Stand for 58mm Portafilter
Stand or holder for your puck screens generally sized for 58mm portafilters. This was sized specifically for the Flair58 puck screens although may work for other puck screens of similar size. Flair58 pucks screens measure at 58.4mm dia…
- Pobrania
- 577
- Polubienia
- 62
- Ocena
- 5
P
PrintablesSoloo
Replacement Air Hockey Table Puck
A replacement puck for a small air hockey table
- Pobrania
- 553
- Polubienia
- 30
- Ocena
- 5
P
PrintablesNsN
Skadis Magnet Puck
A simple model to attach a magnet to an Ikea Skadis pegboard. There are 3 components to the model: Top: This is the part that will be most visible, print this in the main color you want Bottom: This part holds the magnet. This model is…
- Pobrania
- 510
- Polubienia
- 198
- Ocena
- 4,75
P
PrintablesPeki
Cappuccino Assassino | Italian Brain Rot Model
Capuccino Assassino the 3d model.
- Pobrania
- 482
- Polubienia
- 29
- Ocena
- 5
P
Printablesele37
Range Battery Puck
I utilized the original 75mm jar threads and lid by JD3D (linked) for this project. I created this to put in my range bag to hold various batteries that are needed for flashlights, red dots, lasers, etc on my equipment. This model holds…
- Pobrania
- 482
- Polubienia
- 36
- Ocena
- 4,33
P
PrintablesEd van der Heijden
Puch M50 Racing scale 1:8 Designer Ed van der Heijden.
Puch M50 Racing scale 1:8 Spoke rim only: without support Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 220 Filament material: PLA
- Pobrania
- 457
- Polubienia
- 229
- Ocena
- 0
P
Printableszabijak_dadi
Hockey Puck Stand
I was looking for a small hockey puck stand and I couldn't find one I like so here is one I designed. Recommended print settings: 2 Perimeters/Walls 15 % Infill for better stability PLA/PET No supports needed
- Pobrania
- 455
- Polubienia
- 58
- Ocena
- 5
P
PrintablesBugman_140
Phenom Leveling Puck
Here are the files for my Leveling Puck. This was designed specifically with the Phenom in mind, though may be compatible for other large format resin printers. you will need to print 4 x sets of Top and Bottom Sections. and 2 x Tools.…
- Pobrania
- 446
- Polubienia
- 26
- Ocena
- 5
P
PrintablesPeter Gardella
Hockey Puck Holder
holds a hockey puck pretty darn well. No supports required.
- Pobrania
- 432
- Polubienia
- 54
- Ocena
- 4,67
P
PrintablesBeezlee
NHL Hockey Puck Display Mount
Display the puck not the holder. This low-profile holder is perfect for mounting hockey pucks to walls or plaques. Features countersunk screw holes for mounting. Designed for Multi-Material printing but this could also be printed with one…
- Pobrania
- 417
- Polubienia
- 72
- Ocena
- 4,5
P
PrintablesCach-Tech
Ballerina Capuccina
A popular Brain rot Ideal For you think so Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/image
- Pobrania
- 408
- Polubienia
- 12
- Ocena
- 0
P
PrintablesLoogle
PUC (Parametric Umbilical Clip)
What is PUC? PUC stands for Parametric (or Printed) Umbilical (or Universal) Clip. The name has been shamelessly based on the brilliant PUG . I couldn't find a cable management clip that snapped on fairly easily without being too tight,…
- Pobrania
- 407
- Polubienia
- 68
- Ocena
- 5
P
PrintablesFilament foundry
hockey puck
this is a easy print hockey puck i suggest adding weight
- Pobrania
- 403
- Polubienia
- 7
- Ocena
- 5
P
PrintablesTravtron3D
Tabletop Hockey Puck
For those who grew up in the 80's and 90's, I'm sure you will appreciate this. This here is my remodelled replacement for the classic Tabletop Hockey game that when I was a kid, was addicted to, was a great way to get away from the t.v.…
- Pobrania
- 397
- Polubienia
- 27
- Ocena
- 5
P
PrintablesBubbleology
Tenting Puck for Keyboard Tripod Mount
A 3D printable Tenting Puck that let's you mount a split keyboard on a Tripod that uses the standardized 1/4" mounting screw. This model was directly inspired by the SplitKB Tenting Puck . Their aluminium version is splendid. This model…
- Pobrania
- 395
- Polubienia
- 56
- Ocena
- 5
P
PrintablesRambelaya
Hockey puck display stand
Simply hockey puck stand that is a quick print and allows both sides of the puck to be seen. Less than 2hrs to print.
- Pobrania
- 379
- Polubienia
- 40
- Ocena
- 4,75
P
PrintablesBatbx
Pyramidal 6 hockey puck stand
Designed to hold my 6 ice hockey team pucks. Print base only for a 3 puck stand. Add 3 insert for 6 puck pyramidal shape stand. I played with print settings for insert to show infill.
- Pobrania
- 375
- Polubienia
- 47
- Ocena
- 5
P
PrintablesObrogaard
Puch maxi cylinder and cylinder head
From the Good old Days, My version of a Puch Maxi cylinder an cylinder head. Layer hight 0,2 mm
- Pobrania
- 373
- Polubienia
- 23
- Ocena
- 0
P
PrintablesChrisE
ICE HOCKEY PUCK - Mighty Ducks Logo
3D Printed Ice Hockey Puck with Mighty Ducks Logo Textured Wall Surface Printed in PLA - no supports required. Surprisingly glides across tiled surfaces!
- Pobrania
- 364
- Polubienia
- 46
- Ocena
- 0
P
PrintablesPin-Tiki
MagicBand 2 Puck Holder
A similar MagicBand 2 Puck Holder was shared on Thingiverse a while back but has since been removed. I recreated that design in Fusion360. This works with most bands up to 25mm wide and has been tested on the Apple Watch Sport Band, Sport…
- Pobrania
- 340
- Polubienia
- 24
- Ocena
- 0
P
PrintablesGrayWolff
3D Scanner Puck - No supports
Simplified flat bottom 3d scan puck. I also don't have the stickers, so I printed them. Fairly quick assembly process and still fits 17 pucks into DIY Dave's case. The recess for the insert is .5mm deep and 10mm wide if people are still…
- Pobrania
- 336
- Polubienia
- 42
- Ocena
- 0
P
PrintablesEd van der Heijden
Puch MV50 1974 scale 1:8 Designer Ed van der Heijden.
Puch MV50 1974 1x M4 x 70mm stuur fixing electric wire 0.5mm2 1m All axes = PLA 1.75mm Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
- Pobrania
- 308
- Polubienia
- 62
- Ocena
- 5
P
PrintablesSpaceman
Hockey puck holder
Slightly angeled holder for a hockey puck. Files for Inventor included.
- Pobrania
- 305
- Polubienia
- 23
- Ocena
- 5
P
PrintablesTheNewHobbyist
Dremel LC40 Laser Cutter Spacer Puck and Keychain
I recently became part of a team managing and running a Dremel LC40 Laser Cutter. This cutter uses a small plastic “calibration puck” to calibrate the distance between the laser and the material. Unfortunately, these pucks are small and…
- Pobrania
- 300
- Polubienia
- 0
- Ocena
- 0
P
PrintablesV.Chadima
Cappuccino Assassino HueForge
I am learning with the Hueforge software, so I decided to share some of my work with u guys. You can find all informations about printing in the text document under. Don't forget about changing all the setting in your slicer. Enjoy :)…
- Pobrania
- 297
- Polubienia
- 8
- Ocena
- 0
P
PrintablesPequ83
Painting puck/Painting support - Holder
Print without supports. Needs only few meters of filament as it's mostly hollow, so it's one way of wasting those near empty rolls if you occasionally need to paint something. Nose is about 2mm in diameter. Material is obviously…
- Pobrania
- 296
- Polubienia
- 28
- Ocena
- 4,9
P
PrintablesDrop.3D
Pixel Watch 4 Charger Puck
This is a compact and travel friendly charger puck designed specifically for the Pixel Watch 4. The charging contacts are centered on the top, allowing you to simply place the watch on the puck for charging. The underside features a built…
- Pobrania
- 296
- Polubienia
- 37
- Ocena
- 4,67
P
PrintablesWigi
V2 Airless Hexagonal Hockey Puck (Stronger)
created with PLA, can be printed in TPU(recommended). The print in place version only needs supports on the outer rim, everything else doesn't need supports. If a problem comes up, please comment and make that problem known so that I can…
- Pobrania
- 287
- Polubienia
- 22
- Ocena
- 4,5
P
PrintablesSMACKMAX_
Ace (Bambu Lamp Kit 001 - Generic LED puck 61-71 mm)
Consider following me on Instagram ( @SMACKMAX_ ). I try to post all of my prints, renders, and animations to build a portfolio of my projects, often in advance of publishing the models. This way, you can get a sneak peek of what's coming…
- Pobrania
- 282
- Polubienia
- 164
- Ocena
- 5
P
PrintablesTheMeanCanEHdian
OpenPuck Case (Pro Micro NRF52840)
A rounded OpenPuck case inspired by the Steam Controller Puck design. There are design options using negative space or multicolor printing along with blanks. If you haven't heard of OpenPuck it is an "opensource firmware for NRF52840 Pro…
- Pobrania
- 276
- Polubienia
- 15
- Ocena
- 5
P
PrintablesAgustin Arroyo
LED puck light to E27 socket adapter - Bambu Lab LED Kit 001
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License ---…
- Pobrania
- 274
- Polubienia
- 84
- Ocena
- 4
P
Printableskarelk
Cappuccino coffee stencils basic set
Set of stencils that can be used to make a cappuccino art with cinnamon or cocoa. Can be also used for Christmas cookies and sugar decorating. So far the set includes: star heart 3 small hearts hexagon grid hexagon flower smiley face…
- Pobrania
- 262
- Polubienia
- 32
- Ocena
- 4,5
P
PrintablesMechanism
Mechanism/Deckmate Adhesive Puck
The world’s most versatile mounting solution for portable gaming Check out more files for download under my profile here: https://www.printables.com/@get_mechanism Want a stronger/more official solution? We also offer injection molded…
- Pobrania
- 261
- Polubienia
- 16
- Ocena
- 0
P
PrintablesJakeB
Voice Assist Puck
Updated 1/15/24 changed the dev board to an esp32-s3. redesigned pcb for new dev board redesigned puck to be simpler to put together and thinner, looks a lot better too I think! This puck uses an esp32-s3 dev board with esp home to be a…
- Pobrania
- 257
- Polubienia
- 26
- Ocena
- 5
P
Printables0x3D
Hydraulic car jack puck rubber protector
Modeled after this Model, for this Cartrend brand jack: https://www.amazon.de/Cartrend-7740014-Rangierwagenheber-Hydrau
- Pobrania
- 256
- Polubienia
- 42
- Ocena
- 5
P
PrintablesBorninpla
DJ Capucha - DJ Catnip from gabby dollhouse
DJ Capucha - DJ Catnip from gabby dollhouse You are going to need a lot of supports
- Pobrania
- 254
- Polubienia
- 19
- Ocena
- 5
P
Printablesm_collectable
Hockey Puck Phone Picture Card Stand Holder - Multiple Variants Heart Sticks Goalie Mask Engraved
Great for your hockey fan. Hold your phone, tablet, picture, photo, business card or even hockey card with these engraved hockey pucks. There are two groove widths: 15mm wide or 10mm wide. The larger one holds my iPhone 15 with case…
- Pobrania
- 253
- Polubienia
- 24
- Ocena
- 5
P
PrintablesEtno712
Touche / capuchon pour clavier mecanique
Notes pour l'impression Testé en impression PLA et résine. Nécessite un support pour la fixation en croix qui est légèrement en hauteur par rapport au bord de la touche. Notes de montage Quelque soit la matière utilisée, nécessitera de…
- Pobrania
- 253
- Polubienia
- 11
- Ocena
- 5
P
PrintablesWesk
Mini Jar with Screw Cap – Puck-Sized Printable Storage Container
This 3D printable mini jar with a screw cap – Puck-Sized is a simple, practical, and reliable storage solution for small items, parts, or materials. It features a precise threaded design that ensures a secure fit between the lid and the…
- Pobrania
- 246
- Polubienia
- 19
- Ocena
- 5
P
PrintablesDominik Schlager
Puch schlüsselanhänger
Puch Schlüssel Anhänger für Puch Freunde und Fans
- Pobrania
- 246
- Polubienia
- 15
- Ocena
- 0
P
PrintablesLuca
A unicorn in your cappuccino
Want to start your morning with a little magic? Have or bring to your loved ones a unicorn in their breakfast mug! This model works perfectly on my mugs, ⌀80mm, but it's pretty easy to scale it to whatever size you have. Other models,…
- Pobrania
- 244
- Polubienia
- 73
- Ocena
- 5
P
PrintablesJerry Lee
Punch Puck - CAT5e/6+ keystone punch down holder (Belden)
This was specially design to hold Belden's CAT6+ keystone . But will very likely work with other similar style keystone connectors. Nozzle = 0.4mm Layer = 0.3mm Perimeter = 3 Infill = Gyroid 15% Support = can be done without, but if…
- Pobrania
- 244
- Polubienia
- 34
- Ocena
- 5
P
PrintablesEd van der Heijden
Puch Maxi-s 1974 Designer Ed van der Heijden
Puch Maxi-S 1974 - 1976 scale 1:8 Spoke rim only: without support Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 220 Filament material: PLA
- Pobrania
- 243
- Polubienia
- 38
- Ocena
- 5
P
Printablesmeie1kyl
Motorcycle Kickstand Pad / Puck
Kickstand pad to prevent your kickstand from sinking in to asphalt or soft surfaces. Large and flat to accommodate almost any kickstand. Thin and easy to store. 75% + infill recommended. Pictured pad is printed at 80% infill, ABS…
- Pobrania
- 240
- Polubienia
- 43
- Ocena
- 0
P
PrintablesLars Tiede
Dayton Audio TT-25 PUCK mount for Heusinkveld Ultimate Plus pedals
General notes about the model This is an adapter for mounting a Dayton Audio TT-25 “puck” bass shaker to the back of Heusinkveld Ultimate Plus pedals. It should work on any of the pedals, but I only tried the accelerator and brake. The…
- Pobrania
- 238
- Polubienia
- 16
- Ocena
- 0
P
PrintablesFlorent974
Wintering cap for pump, intex electrolyser Ø38 / Capuchon d'hivernage pour pompe, électrolyseur intex Ø38
Winterization cap for pump and electrolyser to spend the winter in better conditions. Resolution: 0.2 Filling : 20% of the water Support : none Material : PETG…
- Pobrania
- 237
- Polubienia
- 18
- Ocena
- 0
P
PrintablesSillyPrints
Hockey Puck Display
Easy to print hockey puck display that fits well in any room.
- Pobrania
- 237
- Polubienia
- 43
- Ocena
- 5
P
PrintablesWigi
Airless Hexagonal Hockey Puck
This model is 3 inches in Diameter and 1 inch tall. its thickness is 0.2 inches and the distance between the removed hexagons is 0.1 Inches. This model was printed in 2 parts and superglued together. I would recommend printing with a…
- Pobrania
- 235
- Polubienia
- 25
- Ocena
- 5
P
PrintablesTrenskow
Hockey Puck holder remix
Made small remix of this hockey puck holder.
- Pobrania
- 230
- Polubienia
- 27
- Ocena
- 0
P
PrintablesDavid@3DOMEngineering
Desiccant Container - Small Cylinder (a.k.a. Puck)
Want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact detail on our page. For more of my designs check out my website: https://3domcontact.wixsite.com/3dom Simple design of a…
- Pobrania
- 229
- Polubienia
- 16
- Ocena
- 4
P
Printables3843313
Cappuccino Assassino 3D Keychain-Italian Brainrot
Meet Cappuccino Assassino – the viral ninja coffee keychain! This iconic 3D model transforms a cappuccino cup into a stealthy ninja warrior, complete with dual katanas and a headband. Designed for fast, one-color prints, it makes an…
- Pobrania
- 228
- Polubienia
- 29
- Ocena
- 0
P
PrintablesT3CHKOMMIE
TicWatch Pro 5 Charging Puck
Print this flat with 0.2mm layers. at layer 37 insert BBs to give it ballast/weight
- Pobrania
- 223
- Polubienia
- 25
- Ocena
- 5
P
PrintablesThomas
Quadlock Puck with locking mechanism (-WORK IN PROGRESS-)
Infos: tolerances between parts: 0,2mm Insert the magnets at the right position and orientation so they pull each other used magnets (5x2mm) since V3:…
- Pobrania
- 220
- Polubienia
- 26
- Ocena
- 0
P
Printablesmads7922
Puch Beer Crate
This is a beer crate with a Puch logo. It has space for exactly 6 cans. Remixed from this model: https://www.thingiverse.com/thing:4638637
- Pobrania
- 219
- Polubienia
- 26
- Ocena
- 0
P
Printablesjtdolane89
Clam lock base mount puck mounts
this model will allow you add the clam accessories to your ice fishing hubs. It's the upper and lower puck. I didn't add what side is the top so ill do that later. The mounts are all the same to the clam pucks. the only thing I made…
- Pobrania
- 219
- Polubienia
- 18
- Ocena
- 0
P
PrintablesDennis
Brackets for Suzuki Cappuccino washer in Mazda Miata MX5
I advice printing it in PETG or ABS. not sure how long PLA wil last or if it gets hot at all. hardware needed: 1x M6x1.0 40mm 3x M6x1.0 20mm 4x M6 nuts 9x M6 washers installation can be a bit tedious because you cant really acces the…
- Pobrania
- 213
- Polubienia
- 36
- Ocena
- 0
P
Printablesrydr2103
Fancy Lithopane Frame Remix - LED Puck Holder
This is a remix of the Fancy Lithopane Frame by DaHouzKat. I merged it with my LED Puck Holder design. This remix allows the frame to be placed anywhere since the LED Puck is battery powered. Instructions: Follow the lithophane and…
- Pobrania
- 212
- Polubienia
- 29
- Ocena
- 4,5
P
PrintablesTheSnootch
Modular Hockey Puck Display Stand
I've added a connector to keep the individual stands from moving around. There is a right side, left side and center module allowing you to extend the display as needed. Connectors can be glued in place if you want. I'm working on a riser…
- Pobrania
- 209
- Polubienia
- 37
- Ocena
- 4,5
P
Printablesdalarpguy
Minimalistic puck holder
I have several pucks from different teams and many of them autographed, and I wanted a way to display them. Most of the stands I found (for either print or for sale) were often way too large. So I designed this minimalistic holder to…
- Pobrania
- 207
- Polubienia
- 30
- Ocena
- 5
P
PrintablesNikola Havrdová
Pucca with heart keychain
Pucca loves Garu He's a pretty boy Ninjas with noodles Kissy chase, kissy face Wham, bam, bam! Pu-pu-pu-Pucca, Pu-pu-pu-Pucca, funny love Pu-pu, Pu-pu-pu-Pucca, Pu-pu-pu-Pucca, funny love, Pu-pu P-P-P-P-P-P-Pucca loves Garu Kissy chase,…
- Pobrania
- 205
- Polubienia
- 42
- Ocena
- 0
P
PrintablesSebastianDruckt
Kreg Puck Wall Mount - French Cleat Storage for Bench Dogs
This is a storage solution for the Kreg Puck bench dogs. They can be mounted with 3 or 3,5 mm screws to a wall or a french cleat system. I printed it with 0,25 mm layer height and a 0,4 mm nozzle. No support is needed. For the…
- Pobrania
- 203
- Polubienia
- 47
- Ocena
- 5
P
PrintablesCson
Hockey puck - with texture
Just a regular hockey puck - with texture
- Pobrania
- 203
- Polubienia
- 11
- Ocena
- 5
P
Printables3843313
Ballerina Cappuccina Italian Brainrot Keychain – 3D
Meet Ballerina Cappuccina – the hottest Italian Brainrot trend of 2025! This iconic 3D model features an adorable ballet dancer with a cappuccino cup for a head, which took TikTok by storm with over 50 million views. Designed by…
- Pobrania
- 202
- Polubienia
- 18
- Ocena
- 0
P
PrintablesBeloc
Hockey Puck Wall Holder
I came up with this design after I got a hockey puck from a local team and wanted to wall mount it. Print in your teams' colors to accent! There is a small overhang, but NO supports are required.
- Pobrania
- 202
- Polubienia
- 11
- Ocena
- 5
P
PrintablesV.Chadima
Ballerina Cappuccina HueForge
I am learning with the Hueforge software, so I decided to share some of my work with u guys. You can find all informations about printing in the text document under. Don't forget about changing all the setting in your slicer. Enjoy :)…
- Pobrania
- 195
- Polubienia
- 8
- Ocena
- 0
P
Printableseroedig
Portafilter Stand for Mr. Coffee Espresso and Cappuccino Machine
Portafilter Stand designed to fit the portafilter for a Mr. Coffee Espresso Machine. Solid base for stable tampering.
- Pobrania
- 192
- Polubienia
- 21
- Ocena
- 5
P
PrintablesWiseone
CompuCleaner Original 2 Electric Air Duster Nozzle
I find compressed air cans a nuisance and a waste. After less than 15 minutes, the can is empty. There are alternative products on the market. The electric Compu Cleaner blower is a good choice. It delivers compressed air under good…
- Pobrania
- 192
- Polubienia
- 23
- Ocena
- 5
P
Printablesrydr2103
LED Puck Holder for Lithophane Prints
This is a small LED Puck holder I designed for my lithophane prints. I wanted to use a battery powered light but needed a way to stand it up. I like that I can control the distance of the light from the lithophane print for the best…
- Pobrania
- 191
- Polubienia
- 32
- Ocena
- 5
P
Printablesmygadgetlife
CMF by Nothing Watch Pro 2 Charging Puck
Just clip your magnetic CMF watch charger to get going.
- Pobrania
- 189
- Polubienia
- 15
- Ocena
- 4
P
PrintablesBob
Boston Bruins Hockey Puck
This is a really fun Boston Bruins hockey puck that you can display in your house or even play hockey with! Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: Doesn't Matter Resolution: any Infill: 30-50%…
- Pobrania
- 189
- Polubienia
- 14
- Ocena
- 0
