Liczymy pasujące modele…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…
TTGO Lora32 T3 Slimline Case This case fits both 433mhz and 868mhz versions of the boards marked T3_V1.6.1. I have both running on the home IOT. I've included a picture of the boards I have as there are a confusing amount of different…
designed in 2 halves , everything can be printed on one bed if printing on kobra 3 with pla+ load my 3mf file and slice it, supports come off easy each half will hold ½ cup of silica gel beads, could be also just filled with desiccant…
I was looking for a minimal case for the Heltec LoRa 32 module. The cases I found either also offered room for a LiPo and a power switch, were not designed for the new solid LoRa antenna, or the module just did not fit properly. So I…
anycubic kobra 3 filament poop catching system consists of filament direction changer and a magnetic catchment bin the direction changer is a direct replacement of the plastic cover of the purge wiper using all stock hardware simply…
Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…
If you LIKE this model PLEASE hit so I get credit, this will encourage me to make more models like this, thanks! Case for the LILYGO LoRa32 V2.1_1.6 Board and 18650 LiPo Battery. I used this is for the MySondy GO Project:…
Remix to allow an 18650 battery in a suitable holder to be accommodated in the back of the case
Printing Recommendations: Use adaptive layer heights (up to 0.2mm max) for optimal surface quality and faster print times. Tree supports recommended for clean and easy support removal. Components: Heltec LoRa32 V3 NEO-6M GPS Module…
I was unable to find a CAD model for this specific TTGO module so I made my own. The dimensions and the placements of the components should be fairly accurate but there could be a slight difference. If you've got any questions or…
anycubic kobra 3 webcam mount, built for logitech cam but should fit most cameras i have included 2 versions, one requires a m3 knurl nut and the other does not it is screw into plastic. you will need 1x m3x10mm screw to mount the bracket…
I designed the model to be able to be printed on its back without supports. Here is a link to the battery that I used https://www.aliexpress.us/item/3256802096150819.html. You can see from the pictures that it does have the same snug fit…
simple case that fits a slim battery and some sensors you might want to have if you need to customize https://a360.co/4poeBnF (2026-01-03 fixed the link) Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes…
I have designed a drop-in replacement of the Arrma outcast drive shaft (ARA311065) I think it is a stronger design as it is not hollow and is cheap to make if you have a 3D printer. I have tested it on multiple materials and layer…
This is a fully 3D printable enclosure for the LilyGo TTGO LoRa32 board used in Meshtastic nodes. The enclosure provides internal space for a battery and supports the use of the board’s native antenna connector. The slide switch and reset…
This was made with the intention to printed out of 95a TPU with an infill of 100%. Just in case you want to use a different filament then TPU or have a softer spring, The one without supports in the middle might work better. Special…
A case I designed in fusion 360 for the heltec lora32 v3.
This 3D printable case is designed for the LoRa32 module (ESP32 with LoRa and OLED display) and includes space for a 1300mAh Li-Ion battery . The design offers protection and portability, making it ideal for outdoor or mobile IoT…
The TTGO LoRa32 from LilyGO is a microcontroller based on an ESP32 with a built-in LoRa chip and an OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it…
This is a printed stand for the Mo-Ra3 420 radiator for watercooled PCs. It might also fit other Mo-Ra generations or sizes. I haven't checked them. It's inspired by the original POM stand from Watercool. For mounting you need 4x M3…
This is a mock up of the LoRa32 V3 board from Heltec. I made it to test some fitments for a project I am working on and used the official DWG from Heltec to model it. It's a pretty barebones mock up, but it also includes the header pins…
Snap-fit case for TTGO LoRa32v1. Tested for version 1 of the device. The case is snap-fit so its better to print it from less brittle material... e.g. PETG.
Modified case for lilygo T3 meshtastic module with 3000mAh battery and small PRG_button.
I 3D scanned this Arrma part and edited the holes a bit so it's printable. It is a little bit rough on the surface. The printed one is on the left. It fits without any problems, screw holes are a bit tight but it won't strip your screw…
anycubic kobra 3 spool holder, good sturdy design, one piece
Case for LilyGO TTGO LoRa32 without battery compartment. Currently needs glue or elastic bands to stay close.
Remix of jeepers01's TTGO Lora32 T3 Slimline Case that can be mounted to a flat face. Also features an enlarged USB-Hole
nice tight fit will not come loose
Case for LilyGO TTGO T3_V1.6.1
The Rhino Wave Mod is a 3D-printed attachment for the Spyderco Para3 , designed to provide Emerson Wave-like functionality —allowing for lightning-fast, one-handed deployment when drawing the knife from your pocket. After extensive…
Sistema de expansão para Anycubic Kobra 3 para adição de um segundo ACE PRO. A melhor posição para imprimir é com a parte de trás virada para a mesa com a logo para cima devido a geometria interna. Pode ser impresso em PLA mantendo o…
Для печати отлично подходит ТПУ 95А. При необходимости отверстия пройти сверлом. Печать без поддержек со 100% заполнением.
You can switch the poop box easily. You can take it off when you want to dump the purging materials. All you needs is: 2 M3 T-Nuts for 2020 Aluminum Extrusion 2 M3 10mm Screws Print 2 Parts
This is a frame for the Heltec WiFi Lora32 module. Has opening for buttons and OLED display. I recommend to print it with supports, so the grove for PCB is clean. The model is parametric, you can make the frame as big as you need.…
wanted a portable case for my Heltec lora32 node, while still allowing a usb cord being plugged in or a solar charger. held together with screws and includes sma pass trough:
A small, slim enclosure for the Heltec WiFi LoRa 32(V3) . Press-fit, no supports required. To minimize size, there is no SMA mount; antenna pigtail just hangs off the enclosure. Still trying to find a way to keep this design small while…
This part is 3D scanned and edited to be printable. It is a little bit rough on the surface. The right one with the pivot ball screwed in is printed. There are 2 different versions. One with the thread for the Pivot Ball, and depending on…
bras / support pour caméra Anycubic Kobra 3 la vis du pack caméra plus une autre petite vis seront nécessaire bras visser sur armature de l'imprimante (vis du pack) étrier visser sur le bras (vis suplémentaire) caméra clipser dans le…
Aquacomputer Ultitop mounting plate for MO-RA3 Radiator
Reinforcements for the new style of Arrma Mojave body mounts #ARA320544 Should only print in a flexible material like TPU Need 8 zip ties. Four of them will need to be about 8 inches long.
I've found that the Heltec LoRa32 boards do not operate on Bluetooth correctly when powered only by USB power, regardless of the USB power source and its ability to deliver correct USB voltage and current. The Bluetooth connection drops…
This is a V2 of my protoype which needed more manual corrections. This one you can directly fit on car. I used and tested with PETG material and had very good results.. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Yes…
A case for the TTGO Lora32 which makes it a more useful portable device, with the intention of using it as a pager. It has three buttons on 12.7mm centres (can be done on perfboard), space for up to a 40 x 60mm LiPo and a 9.6mm piezo…
Print tips: Lay the faces of the surfaces flat on the build plate. If you have a well dialed in printer you will not need to use supports. If you don't, use tree supports. Please see the readmes in the original. You may want to increase…
I created a replacement Arrma 223S Shock Rod End (ARA330666) for my 1/8 223S Typhon. Looks like this will fit most Arrma 223S and 3S models, but check website for compatibility. I had to modify the original design to be more additive…
Arrma Mojave reinforced rear skid plate mount ARA320546 The stock countersunk screws kept pulling through the oem part, so I made one that uses a cap head screw and washer. I printed this with Taulman 3D Glass Fiber Alloy Nylon and it…
Handy case for LoRa32 V2.1_1.6 which you can mount to laptop lid. Has antenna opening big enough to hold Jiaxing Beyondoor Electronics antenna BY-2400-05-03-868MHz.
3d printed housing for TTGO LoRa32 V1.6. The model was printed with a 0.4mm nozzle, ABS carbon plastic. List of hardware: Battery 603035, 700mAh Din912 m2*5 - 2 pcs. Din912 M2.5*6 - 4 pcs. Insert nut m2*3*5 - 2 pcs. Insert nut m2.5*4*5 -…
anycubic kobra 3 slip on top rail cover, add some color bling to your printer
Created this because I wanted my mesh node to hold power if I need to move it. Started with the base from @Shred's to make my mods. I'm unsure of the current power draw, but should last at least 4h (no wifi) Required Hardware: x1 380mAh…
Added a battery holder for 103565 3000mah battery. Its friction fit. "Fixed" by screwing in antenna. Holds pretty well. You can add some foam between battery and the case, if tolerances are too big. My first model, I was learning in the…
A remixed case for the LILYGO LORA32 T3, ideal for MySondy GO
A simple case for the LoRa32U4 devboard including space for the battery and an SMA pigtail
This improved jig is designed to hold 1.5oz shot glasses in the xTool RA3 while providing a more secure grip and greater working area than the original jigs that are included with the RA3. There are two versions of the model, one with…
Custom feet compatible with MO-RA 3 360, should work with MO-RA3 420 radiator also. Works with standard M3 screws(with integrated washers) commonly used in computers. Print settings: layer: 0.25 perimeters: 4 top: 4 bottom: 3 infill: 25%,…
Traxxas Slash 4x4 Traxxas Stampede 4x4 Traxxas Bandit Traxxas Rustler Traxxas Stampede Traxxas Spartan
Minimalist case for Heltec LoRa32 V2/V3 Compatible with Heltec LoRa32 V2 and V3 boards Space for a battery up to 30 × 50 × 20 mm (see the last gallery photo) Perfect for MeshCore and Meshtastic projects Integrated mount for a standard…
Motivation xTool rotaries (RA2 and RA3) work well for many objects, but some drinkware can be difficult to mount. Externally, the surface is frequently threaded, tapered, textured, coated, or otherwise less than ideal for consistent…
This is a positioning guide for the RA3 rotary and Xtool P2S. If you have, like me, a RA3 rotary tool for the F2/F1 and bought afterwards a P2S, you may figure out, that the positioning guide is only part of the separate RA3 for P2/P2S…
A remixed case for the LILYGO LORA32 T3, ideal for tinyGS.
When I had my MO-RA on my desk with the res, I never liked the fact that the terminals and res mount were on the same side. I wanted to be able to see and access the res from the “front,” but have the tubing and wiring exit the “back” so…
A retaining post to keep the Heltec WiFi LoRa 32 V3 to one side of the Deenlai FSH710 "IP66" junction box. Refer to images for layout. Requires an SMA Jack Adapter for Deenlai FSH710 IP66 Junction Box , a DC-DC buck converter (3.3V or 5V,…
This is a frame for the game "Qwirkle Travel Edition" in different sizes 21x21: printsize: 416,6mm (square) 13x13: printsize: 258,2 (square) 6x6: printsize: 119,6mm (square) 4x4: just as a testfile if you want to test different materials…
If you've bought the Dofiki honeycomb for the xtool P3, and you need to retain the use of the RA3 rotary without having to always remove the honeycomb, then you need this spacer. The honeycomb sits proud by 1mm, making the use of the RA3…
These seem to fall off while bashing, so I measured one that I haven't lost yet, so I can keep my cars running. I printed 4 instances at once using PETG, 0.2mm layer height, in the default orientation with 99 perimeters, using…
Customized version of http://www.thingiverse.com/thing:24229 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=24229 Instructions Using the following options: axle_clearance = 10 wall_thickness = 5 width =…
Steering Link for Arrma Quake, Gorgon, Fury, and 2WD Vorteks. Equivalent to Arrma part ARA330753. You'll need to print it with support and at least 6 wall loops.
Box to ttgo-lora32 to Meshcore mesh the box have space to put a lipo with 2000 mAh
You can attach the stopper(s) to the base using double-sided adhesive tape or screws and then lift the printer into the recess of the stopper(s). This reliably prevents the printer from moving uncontrollably.
Bracket to hang a Hydra 32 on a 20x40 extrusion
Pi cam3 case with mount screw holes
I crashed the top of my 4s Mojave into a post, which badly bent the center brace and broke the rod end on the brace. Since I wanted to run the car while waiting for an upgraded GPM part, I bent the brace back and made a simple and durable…
ENGLISH I modify oop storage slide by raising it by 12mm (https://www.printables.com/model/1106019-kobra-3-poop-storage) making the Kobra 3 poop storage compatible for those who would use my 12mm wedge for the foot of the Kobra 3…
This is an attempt to make the Snapmaker A350T more stable for CNC milling. Just a heads-up: M4 threads need to be cut into the base plate and M6 threads into the 3030 aluminum profiles. But I think anyone considering building this mod…
This remix removes the 3D logo from the original case, leaving a blank surface. No other changes were made; this was a personal aesthetic choice. Refer to the original listing for assembly details. Explore my 3D print model collection to…
Since replacement parts for the Takagi RA3 are no longer available, I designed this replacement inlet nipple. Remove the broken center section with a Dremel tool, then install and secure the new part. A 22 × 2 mm O-ring is required. The…
This is a 3D-printed hard drive caddy designed for the HP DL380 G4 2U server, specifically for Ultra320 SCSI drives. It features a snap-fit design with a front handle for easy installation and removal. This custom caddy is a great…
I created a replacement Arrma 223S Shock Rod End (ARA330666) for my 1/8 223S Typhon. Looks like this will fit most Arrma 223S and 3S models, but check website for compatibility. I had to modify the original design to be more additive…
Created this because I wanted my mesh node to hold power if I need to move it. Started with the base from @Shred's to make my mods. I'm unsure of the current power draw, but should last at least 4h (no wifi) Required Hardware: x1 380mAh…
Modified case for lilygo T3 meshtastic module with 3000mAh battery and small PRG_button.
3d printed housing for TTGO LoRa32 V1.6. The model was printed with a 0.4mm nozzle, ABS carbon plastic. List of hardware: Battery 603035, 700mAh Din912 m2*5 - 2 pcs. Din912 M2.5*6 - 4 pcs. Insert nut m2*3*5 - 2 pcs. Insert nut m2.5*4*5 -…
These seem to fall off while bashing, so I measured one that I haven't lost yet, so I can keep my cars running. I printed 4 instances at once using PETG, 0.2mm layer height, in the default orientation with 99 perimeters, using…
This is a 3D-printed hard drive caddy designed for the HP DL380 G4 2U server, specifically for Ultra320 SCSI drives. It features a snap-fit design with a front handle for easy installation and removal. This custom caddy is a great…
With a little double sided tape you can use this to line up exact center when engraving tumblers, glass, etc
Transform every engraving into a masterpiece with this precision‑engineered leveling accessory. Designed for creators who refuse to compromise, it brings curved, angled, or irregular items—such as wine glasses, bottles, tumblers, and…
A remixed case for the LILYGO LORA32 T3, ideal for MySondy GO
Adaptor to mount the Bosch POF 1400 on a FSN rail. Also included are some pins so that it works with RA32 rails. Effectively making this a poor-mans FSN OFA adaptor. The lower part of the pins have a width of 4.1mm, which comes out…
