Liczymy pasujące modele…
Overview I designed this as part of a budget F1 in Schools track and timing system back in 2015. The official Denford system is of high quality but very expensive. Beyond the budget for most schools. The original system is seen here…
A dragster made to be powered by a standard CO2 cartridge for a summative project in grade 9. The original design was made out of wood and has a few differences due to the tools used to manufacture it and to reduce some weight, but I also…
3 Coral frags Racks for reef Aquariums for 4 and 5 plots. Fixed or customizable height Print Settings Printer Brand: Creality Printer: Ender 5 Supports: No Resolution: 0.2 Infill: 20 Category: Hobby
Remixed design to support 15 frags and extended the hangars to sit lower in the tank, as well as multiple spots to move the rack up and down to accommodate light acclimation. Uses minimal filament. Print 2 hangars. Use the…
The Rocket Dragster is designed to use standard Estes model B and C rocket engines set into the rear of the craft. Print off 4 wheel hubs and press fit them into standard 608 bearings (https://a.co/d/d0hcxeg) to giving it less frictional…
The new and improved Dragster from Brick3D - now lower, sleeker and meaner! This set is chuck-full of new parts, including slimmer wheels, a new T-shape and some very specific triangular bases. Keep an eye out for the new color-ways we'll…
This is a dragster style carburetor scoop I designed for my boat. It requires quite a bit of post-processing to make it look finished. The Mounting Plate was cut from ¼ inch polycarbonate on a CNC router. The rest of the parts are…
After learning basic Blender modelling, I decided to take a crack at my first #3DTrenchy remix. I couldn't figure out how to make the support wheels print in place, if you have an idea, tell me down in the comments, I might implement it.…
These are designed for use with 1/8 inch metal axils. You can use either 1/8 inch aluminum rod (as in the picture) or 1/8 inch brazing rod. Some scaling might be needed for a snug fit with the axles depending on the exact axle diameter.
A hex grid for holding coral frags (35mm hex tiles). Just an organic shape that allows for interesting patterns. Just cut it in your slicer and super glue together if it's too large for your print bed.
I got the steering wheel off of thingiverse. Wheels spin and you can add a wheelie bar and parachutes.
CO2 Dragster Front Wheels for 3.2mm axil
Remixed from the Edge of 3D RMRRF Dragster Wing Towers, same position but lowered by 60mm Thank you Scott, Edge of 3D for the original design
This is my CO2 Dragster Race Car that is fully 3D printed and ready to assemble and race. It can be assembled fully without any external hardware or adhesives. This car was designed and constructed for the TSA Dragster Design contest. It…
This is a remix of the rear axle from this model . To complete this mod, you must be able to tap eight m5 threads into the flange coupling. We found it tedious to balance the rear wheels of our original car build due to the uneven nature…
Remix of the E3dBuggy model, towards a dragster, overhangs of 35 degrees, it can be done without supports, you should put only 0.15 of height in the upper wing area. Fun to modify the model.
Floor protection shoes for Tecta**B20 style flying chairs with round and/or flattened ("aplati") tubing. Kufengleiter für Tecta**B20 Kragstühle/Freischwinger als Bodenschutz für Stühle mit rundem und/oder abgeflachtem ("aplati") Rohr.…
Shopvac dust collecter adapter for Black & Decker Dragster Belt Sander
Da meine Eltern quasi jeden Tag eine Runde Dorfromantik spielen, sind die Auftragsmarker schon sehr abgegriffen und teilweise nicht mehr lesbar. Die vier Dateien enthalten jeweils einen Marker mit Zahl und können entweder mit AMS…
No Drill Mod Replaces the Gear for M4 bolts and a Clamp to hold the Gear to the Coupler BOM 4x M4x12 Button Head - Large 30T Gear to Flange 4x M4 Heat Set Inserts (4x6.31x5.5 / M4S)
Model dimensions: - outer diameter - 17 mm - width - 7.2 mm
Fit for "WypAll General Clean L30 Heavy Cleaning Towels" - makes functional use of 1" wooden dowel - see my YouTube video of this part in action: “LowRider v3 DIY CNC - Easy quick project - super satisfying!” I am including the SVG files…
Model dimensions: - diameter - 17 mm - width - 4.8 mm
J'ai eu l'opportunité de trouver d’occasion l’aéroglisseur Dragstair de la marque Ikarus, mais il demandait une bonne révision… Une sérieuse restauration également ! Pour le début de celle-ci, j’ai commencé par le système de sustentation…
This is a remix of the frame and body from this model . When I built the first dragster for RMRRF 2023 we had to dismantle it so that we could get it to Colorado safely by plane. While working on that, my friend and I had the idea of…
a moldel I made for my friend as a Birtday present. Just a really good looking small Wallart
Model dimensions: - outer diameter - 16 mm - width - 5.4 mm
I made this offroad tow hitch to tow a camper trailer behind my Cragsman. Designed to accept a Traxxas TRX-4 rod end. The lower side of the hitch has a hex opening to hold a plain M3 nut, and the pin is an M3 screw through an M3 wing nut.…
J'ai eu l'opportunité de trouver d’occasion l’aéroglisseur Dragstair de la marque Ikarus, mais il demandait une bonne révision… Une sérieuse restauration également ! Ensuite, je me suis penché sur l’organisation de la partie RC avec en…
J'ai eu l'opportunité de trouver d’occasion l’aéroglisseur Dragstair de la marque Ikarus, mais il demandait une bonne révision… Une sérieuse restauration également ! Pour la suite de celle-ci, j’ai continué par le dispositif de…
Model dimensions: - diameter - 19 mm - width - 4.6 mm
These are meant to attach to paper rockets and paper dragsters. They are modeled for use with ½ inch PVC rollers (0.840 OD), but could easily be scaled for other sized rollers. On the rear of the nose cone is a small hole meant for a size…
Model dimensions: - diameter - 17 mm - width - 4.8 mm
J'ai eu l'opportunité de trouver d’occasion l’aéroglisseur Dragstair de la marque Ikarus, mais il demandait une bonne révision… Une sérieuse restauration également ! Cela étant, j’ai continué sur l’organisation de la partie RC avec en…
model of a pinewood derby dragster doesn't move sorry
J'ai eu l'opportunité de trouver d’occasion l’aéroglisseur Dragstair de la marque Ikarus, mais il demandait une bonne révision… Une sérieuse restauration également ! Afin de finaliser ce projet, j’ai ajouté un couvercle fixe avec…
J'ai eu l'opportunité de trouver d’occasion l’aéroglisseur Dragstair de la marque Ikarus, mais il demandait une bonne révision… Une sérieuse restauration également ! Enfin, j’ai terminé l’organisation de la partie RC avec en troisième…
Just a drag racing dragster (the wheels do not move)
Adds a Backing Clamp for the bolts of the Tire Hub to attach through the Flange and secure Dragster Tires Check clearance in your Wheel Hub/Tire choice, these are nearly exact fit to the flange Tune Shrinkage M4 Bolts to fit your setup,…
Currently Experimental Remixed from the Original Steer Axle and Steering Arms Ream out the top holes with an M3 screw or M3 reamer Add an M2x6 Socket Head self tapping screw to the bottom of each Steering Arm, Any longer and the screw…
This is a remix of Vit Budina's Suzuki Jimny that I made into a dragster.
Raise the Fans outside the motors magnetic field and allow them to run at full power 8x M2.5x25 Button head screws use blue loctite Link to cooler used https://a.co/d/7xBOLFR
Wall-mounted dispenser holder for a box of 20 reusable Microfiber Rags with rag hanger. Microfiber Rags holder dimensions: Mounting recommendation: two countersunk screws, 3.5 mm diameter double-sided adhesive tape Printing…
Turn your Otto into a straight-line speed machine with this Top Fuel Dragster kit remix ! This design transforms the classic Otto robot into a miniature drag racing beast, inspired by real Top Fuel dragsters. The kit focuses on bold…
J'ai eu l'opportunité de trouver d’occasion l’aéroglisseur Dragstair de la marque Ikarus, mais il demandait une bonne révision… Une sérieuse restauration également ! Pour accompagner le dispositif de propulsion, une signalisation était…
I made this rear skid plate/ servo guard to replace the rear bumper bar on my Cragsman in order to gain a better departure angle and help protect the rear diff lock servo. It also has a small lip to help prevent the lower edge of the body…
A simple socket to remove and install the wheel centre caps on a Traction Hobby Cragsman. Easily remove the centre caps by hand. Requires no additional tools. Printed upright with no supports or raft/brim. -If the tool is firm on the…
uhhh print in high detail to get the best results for racing
This is a lower steering brace for the Top Fuel 3D printed dragster commonly raced at the RepRap Festivals. This part will increase control and stability, while also reducing breaking front steering parts. A hole must be drilled…
This is just a basic spacer to fit the steering knuckles on the Cragsman. The spacers are used when running a high steer setup (Steering tie-rod on top of the knuckles for better ground clearance). 2 spacers are required per vehicle/ one…
I replaced the stock ESC in my Cragsman with a Holmes BR-Mini ESC, so I designed this retaining clip to hold the wires in place against the battery tray. It also has a small tab to hold the receiver lead plug in place. You will need to…
Gridfinity storage box for Mr. Rags Macro Keyer. 2x3 7U - stackable More about Mr. Rags Macro Keyer: https://www.youtube.com/watch?v=KpSZtEJWGxs Thinkercad link: https://www.tinkercad.com/things/kkJocwf1DDq-mr-rags-gridfinity-box Note:…
Made in Onshape doesn't have any wheels so you have to print those separately
Disclaimer. this only works on belt drives and not the shaft drives. Recommended material (PETG, PET, ABS, ASA) Recommended settings (infill 10-15%) (walls 3-4) extra hardware (gopro thumb screw, M5 nut, and a gopro cam)
Aufbewahrungsort für mein Rockler-Klebstoffauftragsset, meine Domino-Klebstoffdüsen von Steve Rowe, den Domino Centre Finder und meine 5/6/8/10-Dübelfräser 8mm Schaft.…
Shopvac dust collecter adapter for Black & Decker Dragster Belt Sander
I got the steering wheel off of thingiverse. Wheels spin and you can add a wheelie bar and parachutes.
Wall-mounted dispenser holder for a box of 20 reusable Microfiber Rags with rag hanger. Microfiber Rags holder dimensions: Mounting recommendation: two countersunk screws, 3.5 mm diameter double-sided adhesive tape Printing…
Disclaimer. this only works on belt drives and not the shaft drives. Recommended material (PETG, PET, ABS, ASA) Recommended settings (infill 10-15%) (walls 3-4) extra hardware (gopro thumb screw, M5 nut, and a gopro cam)
