Liczymy pasujące modele…
I present a remix of a popular dino keychain prepared by my 9-year-old daughter, I am very proud of her. The dinos are 75% scale compared to the original. Despite this, the mobility has been preserved. Additionally, the right one is…
Backstory In the midst of 2025, the peak of mini bucket-crazed social media exploded. Some folks went so far as to summon their inner Pokémon trainer and declaring they " gotta catch them all! " My curiosity was piqued to see so many of…
Fantastic rendition of one of the most classic robots from Japanese anime from the 70s and 80s. I printed it standing up and with full supports using Cura and a Creality Ender 3 v2 Neo, 0.6 nozzle and 0.2 layer height. Original model by…
Mario with a pumpkin head. gcode includes organic supports.
Does your significant other keep buying trending water bottles but has no where to put them when taking walks with the little one? Fear not, this water bottle holder will secure even the largest trendy water bottles. Might work for other…
Replacement Forend for Brownings with cracked wood. Part is oversized for sanding to custom fit. Detent can be made from a nail and spring.
Flexible Rohrendkappe / Flex Pipe End Cap / Anpassbares / Customizable OpenSCAD- Script → 0.4 Nozzle → 0.2 mm Layer Height, → 40% infill, → TPU → No support
I really wanted to print my own Magpul forend for my Mossberg 500. Unfortunately, my tube was the shorter 6 ¾" length which meant I needed to purchase an adapter or a whole new longer tube. I decided to remix the Magpush by Cursd using…
Der Handyhalter endet kurz unter der Kamera, sodass das Handy gerade auf dem Handyhalter steht. Er ist so designed, dass er möglichst wenig Platz einnimmt. Infill zwischen 25 und 40%, sodass ausreichend Stabilität gewährleistet ist. Die…
For an original look-and-feel, print in woodfill PLA. For maximum sturdiness I chose 5 perimeters and 50% infill. Organic supports where needed. 0.6mm nozzle height and 0.25mm layer height works great. I've experimented a bit with the…
Specially for Danish members
This is a printable version of the standard AP900/ Air Venturi Alpha forend/ fore grip. The M Lok is functional and the location for the standard magnet to secure the folded stock is included. Additional reinforcement is included that…
Join the EnderXY community on Reddit: https://www.reddit.com/r/EnderXY/ I'd recommend printing in PETG at least, although around 30% of my initial testing was done with PLA and didn't notice any issues. Updated 19/05/25: Fixed an issue…
Monster standee replacement for the board game Gloomhaven. Standee Count: 6 Based off the artwork work of Alexandr Elichev . Works with number bases found here: https://www.thingiverse.com/thing:2872339 Check out the awesome remixes of…
I call it the “eco” version because I tried to design a frame (though visually a solid as the first one) that needs significantly less material to print. Having set infill to 5% you need only 56g of PLA. Furthermore I added mat and back…
Replacement follower for Magpul Gen M3 PMAG in .6.5 Grendel. Modeled in Blender, I included the .blend file. Category: Replacement Parts
Flexible Vierkantrohrendkappe / Flex Square Tube End Cap / Anpassbares / Customizable OpenSCAD- Script → 0.4 Nozzle → 0.2 mm Layer Height, → 40% infill, → TPU → No support
3d printed barend for BMX. I tested it with PLA, but a stronger material might be needed.
TRENDnet TEG-S762 rack mount for 10-Inch racks as an extension / version on the wonderful shelf for the Lenovo Tiny by Stougaard print. Similar design, holds the switch in place even when pushing / pulling cables into the switch. Same…
A smartwatch stand for my kid's 4G/GPS smartwatch produced by Garett - model Trendy 4G. The magnetic charging cable slides into the slot and is hold there in place.
A 3D model of a Grendizer/Goldorak enemy spaceship that i made with ZBrush. I made two versions. One complete and another that can be printed in two parts to eliminate the use of supports under the spaceship and have a clean model.
Modeled this up for fun. takes a few pieces of 1/2 in dowel. will probably need gluing and sanding. Category: Props
Zapatilla para que los niños aprendan a atarse los cordones
⚔ Vharka Skullrend, Barbarian Warlord Medium humanoid (human), chaotic neutral Armor Class 16 (hide armor, natural toughness) Hit Points 112 (15d12 + 30) Speed 40 ft. STR DEX CON INT WIS CHA 20 (+5) 14 (+2) 15 (+2) 10 (+0) 12 (+1) 13 (+1)…
Der Handyhalter endet kurz unter der Kamera, sodass das Handy gerade auf dem Handyhalter steht. Er ist so designed, dass er möglichst wenig Platz einnimmt. Infill zwischen 25 und 40%, sodass ausreichend Stabilität gewährleistet ist. Die…
Tool for installing/removing forend nut on a Mossberg 500 shotgun. There's a hole in it you can put a screwdriver in to help you turn. I didn't realize I would need one to put on a new forend grip, so I threw this together. It's 3AM. It's…
I could only find 50 round ammo boxes available for 6.5 Grendel and wanted to keep them in batches of 100 for reloading and sorting purposes. I designed the model with a minimalist approach, so the 2 pieces print and snap together…no need…
Der Handyhalter endet kurz unter der Kamera, sodass das Handy gerade auf dem Handyhalter steht. Er ist so designed, dass er möglichst wenig Platz einnimmt. Infill zwischen 25 und 40%, sodass ausreichend Stabilität gewährleistet ist. Die…
Tabla diseñada con inspiración Montessori para impresión 3D, creada meticulosamente para involucrar a las mentes jóvenes en el enriquecedor mundo del color y la organización espacial. Esta herramienta educativa innovadora encarna la…
Various word art names. Prints well at 0.2 on Mk3S+ and Mini+. Print face down on smooth PEI sheet for best results. Credit to Robert Halter.
Einfach zu drucken in Material eurer Wahl
Selbstverriegelnde Besenstielhalterung Ein robuster und simpel zu druckender Besenstiel- und Gartengerätehalter. Die Grundkörper sind aus PLA und die Anpressflächen aus TPU. Ich habe den Halter mit einem Stieldurchmesser von 24 mm und der…
Ich habe etwas gebraucht um die Wandstärke der Hydra AMS Wände zu vergrößern damit die Spulen sich nicht mehr zwischen Wand und Führungsrollen verkeilen bzw. die Rollen beschädigen. Da habe mir Clips zum zentrieren der Spulen im Hydra AMS…
Für ein Projekt habe ich die kostenlos erhältlichen Modelle Dennis und Fabienne mit einem Sockel versehen. Die Dateien sind bereits für 1 zu 4 Modelle skaliert. Für kleinere Modelle hab ich sie anschließend im slicen verkleinert. Für…
Der Handyhalter endet kurz unter der Kamera, sodass das Handy gerade auf dem Handyhalter steht. Er ist so designed, dass er möglichst wenig Platz einnimmt. Infill zwischen 25 und 40%, sodass ausreichend Stabilität gewährleistet ist. Die…
Video : Download the 3D model of Vega's Imperial Ship from Goldorak/Grendizer for free ! Easy to print, this model is made up of several parts that easily fit together to recreate Vega's famous Imperial ship ! You don't need supports,…
Updated Version 3 - with and without cutout for you to insert your model Stargate. This is my Stargate Platform model. A few models are provided, a platform with a Stargate insert hole and one without. I've printed this out, looks great.…
eine Simple Aderendhülsenbox bestehend aus 5 teilen 1x Box 1xDeckel 1xDeckelhalter 1xM3x6mm Threadedinsert 1xM3x10 Imbusschraube Den Deckel am besten mit den gleichen Einstellungen Drucken wie im Bild zusehen ist, für einfachers lösen vom…
It's a collapsible school cone! I wish all the first years the best of luck in their school careers. May you all be graced with the most exemplary pedagogues! 25 cm (9.8 in) version: print time approximately 4 - 5 h, 80g of filament 17 cm…
download for free golgoth 2 goru goru goldorak
Innerbarends to get additional grip posistion on bike flatbar. Especially for wide fatbike flatbars, superior aerodynamics compared to normal grips. I printed mine with PETG, other pair in picture is sanded smooth. Weight 52g per pair…
✨🐍 A little piece of Fantastica, made with care and brought to life by you 🐍✨ Some objects are more than just things we can hold in our hands. They carry memories, feelings and entire worlds within them. For me, AURYN is one of those…
I created this model with the help of Text to Image to STL software. I then tweaked the model a bit to reduce hanging fragments and extreme overhangs. It will still require supports though. This was generated and printed as an example of…
for English see below Bisher habe ich Lautsprecherkabel und Netzwerkkabel aus dem Bühnenbau auf Kartonagen gewickelt. Jeder kennt wahrscheinlich das resultierende Problem: es entstehen Kabelschlingen, je länger das Kabel umso schlimmer.…
To the winch, wench! 8x3mm magnet to be glued in. Example print used 15% infill, but…we don't care whether or not we care. If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile…
Waste Water Key for Dethleffs Motorhome Grey Waste, we have glued and put a screw in the tighten it (also put some duck tape on to make sure its tight) at moment its working very well
Here's my proxy model for Render! He's a big angry sasquatch looking critter with brown fur, big claws and terrible teeth… so here you go! As always, the .blend file and pre-supported .3mf (including the one that I used to print this on…
I really enjoyed designing my Spitting Drake, so I made a Rending Drake to match! I figure that the Rending Drake and the Spitting Drake are probably closely related species, so I figured that I'd move this guy one step closer to his…
Barend for Bikes, easy to assemble!!! Requirements: - M5 x 25mm screw - M5 screw nut
Print settings: 0.2mm layer height 3+ bottom layers and 4+ top layers 4 perimeters w/ 0.6mm nozzle or 6 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA should work fine but I'm not sure about the latch flexibility Specific build…
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad This is an insert (and corresponding lid badge) to build a 100 round weatherproof ammo case out of Harbor Freight's…
rounded_cube() is a module for creating cuboids with rounded edges in OpenSCAD The key feature of this particular rounded cube module is that it is significantly faster to render than using the hull() transformation and a bunch of…
Der Handyhalter endet kurz unter der Kamera, sodass das Handy gerade auf dem Handyhalter steht. Er ist so designed, dass er möglichst wenig Platz einnimmt. Infill zwischen 25 und 40%, sodass ausreichend Stabilität gewährleistet ist. Die…
Now you can have your very own Brendan S.C.S.M, complete with decals! The standard size Brendan comes in at is about 1:16-1:15 in scale, meaning your 4-5" figures are perfect for displaying along side him. If you are printing this Brendan…
Retro Artistic Rendition of Planetary Engulfment. Feel free to figure out a better way to orient, spit and slice this beast. I would not necessarily go with my g-code. its just there as a starting point.
For one off operations, edit the OpenSCAD file and render. For batch jobs. go to town with the Makefile. Here's an example used to generate the DXF, STL, and PNG examples.
This model uses the following parts: Parts 100 RPM motor 12V AC Adapter 12V Panel Mount Barrel Jack Speed Controller Canopy Ties Heatset Inserts 11 3x5x4 Heat-set Inserts (4 for base, 4 for front cover, 1 for cam, 2 for bouncer clamp) 1…
The model was originally 2 separate models that I edited and fused together, after many hours of work to make a model almost identical to the new 2025 Volkswagen T-ROC Trend
Remix of Vilcoyote77 7.62x39 50rds box, but it has been heavily modified. https://www.thingiverse.com/thing:4104794 I have also uploaded a 10 round box. You can find that here -…
Brenda doesn’t tell you jokes. She just does the job. —————————————————————————— All my designs are protected by copyright laws. Upon downloading you agree to use the files for personal purposes only. This means you do NOT have the right…
Hi! If you came here to find some useful mods for your ender 3 you've come to the right place. Here is my personal list of the best upgrades for this printer. Necessary upgrades: 1.First of them is silent 32 bit mainboard i used creality…
90210 - Brenda Walsh (Shannen Doherty) - 1990-2000 3D printable model.
Flexibler Rohrendschutz / Flex Pipe End Cover / Anpassbares / Customizable OpenSCAD- Script → 0.4 Nozzle → 0.2 mm Layer Height, → 40% infill, → TPU → No support
Modelo original inspirado en una de las tradiciones más representativas de México. 🇲🇽💀🌼 El diseño incluye diferentes elementos característicos de una ofrenda de Día de Muertos: Flores de cempasúchil Papel picado Calaveras decorativas…
As time moves on and the future evolves, so must our surroundings. With these inevitable changes - I bring you The Future Gnome . Reflecting the fashion and style of the impending life cycles, this Gnome is poised to usher in the next…
This model is perfect if you need to calm down and etc.
Grendel is a long-running series of comic books originally created by American author Matt Wagner. Grendel was the masked identity of Hunter Rose, a successful author. As Grendel, he worked as an assassin before taking control of New York…
Trendy can holder. good for the summer.
I lost a handlebar end plug on my MTB, so I decided to design my own. To prevent the brittleness of PLA in crashes, I used a beer cap for reinforcement. additional Hardware: 2x M4 Bold 2x M4 Nut Do not overtighten or it might break.
I added some cool ne features to the great tracklib .. hopefuly this features will reach the github from the original .. Category: Mechanical Toys
Der Handyhalter endet kurz unter der Kamera, sodass das Handy gerade auf dem Handyhalter steht. Er ist so designed, dass er möglichst wenig Platz einnimmt. Infill zwischen 25 und 40%, sodass ausreichend Stabilität gewährleistet ist. Die…
6.5 Grendel stacking loading block with a clearance of 20mm for powder funnel. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
Ester cap for RV camper. Fitting my Dethleffs Trend A5887
"It uses the existing 4 screws from the original forend on the Takedown." Print Settings Printer Brand: ELEGOO Printer: ELEGOO MARS 3 Pro Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 40%+ Filament: ALL PLA or PETG ALL…
Der Handyhalter endet kurz unter der Kamera, sodass das Handy gerade auf dem Handyhalter steht. Er ist so designed, dass er möglichst wenig Platz einnimmt. Infill zwischen 25 und 40%, sodass ausreichend Stabilität gewährleistet ist. Die…
Giggle One of my favourite characters from the last book, picturing him appearing over Gustavo, giggling then cannonballing through his back end gets me every time. He currently sits on a shelf above my bed, I can hear him giggling…
This is a Stargate Platform that you can use to mount your Stargate Models on. I created this and made a large version to be the base of the Stargate by Glitch. Note this does NOT house space for any electronics. Basically a static…
Die Endkappen sind für einen Lenkerinnendurchmesser von ca. 18,5mm. The end caps are for a handlebar inner diameter of ca. 18.5mm. I used PETG Prusament orange and white. diameter: round 28*18 With support and 3 perimeter. Print time 31…
Zusätzlich erforderliche Materialien: 1 x M5 Mutter (8mm) 1 x M5 35-40mm Senkkopfschraube (Imbus oder Kreuzschlitz) Das Drucken der einzelnen Teile in verschiedenen Materialien (PLA, PETG) ist nicht erforderlich. - Bitte bei den GCodes…
Do you want to create your own multicolor filament? Our Hexagonal Spiral design is the perfect solution for you! With a diameter of 1.6mm, this design allows you to generate a multicolor filament by simply including color changes in your…
Remix of Vilcoyote77 7.62x39 50rds box, but it has been heavily modified. https://www.thingiverse.com/thing:4104794 I have also uploaded a 20 round box. You can find it here -…
Warcraft Rumble - Rend Blackhand, provided by Blizzard https://warcraftrumble.blizzard.com/en-gb/collection
There's an ongoing trend with the Arch / Dune pattern, including floor rugs, serving trays and much more. This print will provide you with a basic dune pattern in the form of a serving tray. It's suitable for A1 mini, with a size of…
Amphibious Assault Ship Render (TCG ANADOLU)
Public domain backyard telescope render model by jackiejake . Originally uploaded to Blend Swap . Designed in Blender to be a render asset, not intended to be printed and used for astronomical observation.
Simple and compact Holder for Digital Angle Rule by Trend. Used for the rule here: You can Buy me a coffee if You feel good doing so :) ( And very big Thank You For interest in my work ) https://www.buymeacoffee.com/warlogh
uguete educativo que transformará la manera en que los más pequeños aprenden y se desarrollan. Nuestro cilindro de aprendizaje es una herramienta perfecta diseñada para introducir a niños en el fascinante mundo de las formas geométricas y…
Rohrendkappe Vierkantrohr 30x30mm , für 2 mm Rohrwanung.
DIY 3D-Druck Bauprojekt eines motorisierten, selbst fahrenden Kamera Dolly. Mit verschiedenen Fahrmodi, die durch einen Arduino Nano gesteuert werden. Der Stromversorgung erfolgt durch einen eingebauten, aufladbaren Li ion Akku. Das…
Hooks hold headphones, VR headset and other such things
Works on the Babytrend Expedition Wagon. Made it to hold a bike on the front if a kid gets tired of riding it. Print with supports for the arches. Infill: 25%+ Layer Height: Works fine with 0.3mm
Hello everyone, I have vectorised a technical drawing of the Apollo–Soyuz Test Project and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 5-10 minutes! Please note the settings…
PETG nut and bolt m4x50mm
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
I asked myself if the 65g (each) barends of my BMW F850GSA do something and changed them for 15g ABS (0.2mm layer, 5 perimeters, 5 layer top/bottom, 25% gyroid). Besides the 100g saved weight, there is no increase in vibration. I might…
Recreated Verender's model to have a M8 bolt for the interface for the drill instead of the printed part
Im new to 3D modelling so if you can make it better please do give it a remix. I printed in PLA all settings left as standard: Shell thickness 1.2mm density 15% with supports
