Liczymy pasujące modele…
This amazing automatic M3 bolt sorter is designed for the specific bolts you can see in the picture. I don't know how it works with other M3 bolts, but feel free to try. :) Be aware that if you use m3Sorter_bottom_gridfinity.stl you also…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…
I designed this simple storage unit for my rotary tool bits based on the Gridfinity system by Zack Freedman.
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
I liked the ideas for Gridfinity credit card holders that were already posted, but I had a slightly different use case, i.e., a shallower drawer, and felt it could hold more to maximize storage space. I don't use a magnet system, so I…
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
Gridfinity Bin for gallon size ziploc baggies (3x7x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 28 to hold lid on, but only takes 12 to hold firmly. Print lids face…
A 1x1 Gridfinity pen holder for 5x pens up to 12mm in diameter. Pen holder now fits Pilot G2 pens.
I needed a solution to solve the issue of my Zyn cans sliding around on the base of my Gridfinity as I open and close my drawer. I designed the holder to be 2x2 as far as the base and it holds 2 cans of Zyn. Print Settings Layer Height:…
UPDATE: I created a new and improved version of this model that nests and allows for multi-stacking. It's better than this one in every way - I recommend using it instead. Link to updated version:…
Gridfinity Bin for quart size ziploc baggies (2x6x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 24 to hold lid on, but only takes 8 to hold firmly. Print lids face down…
Gridfinity 2x4 bin holder for the modula system The holder has room for 2x4 gridfinity bins. Print with 15% grid/gyroid infill and grid support from build plate only. You need 2 adapaters biltema (or vanilla adapters ) to peg board/wall…
Gridfinity for maglite mini - part of my 'Gridfinity Survival Kit' Collection
Organize your crafting essentials with the Gridfinity 5x2 Holder, specially designed for Bosch Gluey and spare glue sticks. This holder provides a neat and accessible storage solution, ensuring your glue gun and extra supplies are always…
Long socket holder 4-13 metric, 3/8" drive ratchet. The long socket holder uses a gridfinity 2x4 bin. Its made for metric sockets 4, 5, 6, 7, 8, 9, 10, 11, 12 and 13. Print with 10% grid/gyroid infill and no support. You can hang it on a…
My wash bottles are not perfectly round so I went up to 74mm to give a little extra space. Also allows for bottom mounting. The corners started to warp a little for me, but didn't affect the fit.
I love Gridfinity, and I also love to maximize storage space. I am not generally happy with rectangular bins to store stuff. A cutout shape ensures the right item returns to the right spot in the drawer. In this case, I was able to angle…
Gridfinity bin to hold a nozzle torque wrench and extra sockets. The torque wrench I used is from Triangle Engineering. Although it is a pretty generic tool and I’m sure there are similar ones out there that would fit as well. This model…
Gridfinity tray for cold chisel set. My first gridfinity model. Still getting the hang of it so it isn't as perfectly shaped as it could be. Possibly this makes it more universal?
This is a custom-designed lightweight Gridfinity baseplate optimized for the IKEA NORDEN table drawer. The set includes two baseplates per drawer, each featuring a 3x4 Gridfinity layout. These baseplates were built using the Autodesk…
Here is a remix on the gridfinity empty bin by Akio. i needed a holder for my flashlight that i use to check on my printers, my flashlights are like 10mm sockets they constantly disappear so needed to have a spot to put one. this works…
designed to use M3 20-22mm screws and heat inserts.
Introduction Since I could not find a perfect bin for my Forstner-Drills, I decided to make my own. It had to be as small as possible and practicable to fit into my shop. This is a remix of the original bins by Zack Freedman that you can…
A new Gridfinity box in replacement for my honeycomb design. The box is a 2x2 Grifinity grid with a total hight of 33.8mm where the wall is 3cm in height. Hope it is usefull for some of you! The base is created with the gridfinity fusion…
About Gridfinity holder for 3DJAKE Nozzle changer kit (CB-DW5B) - just the top, which can be pushed in into any 1x1xY box - I took 1x1x3 pmcquay bin as a base in it. Please give a like and post makes and provide comments for further…
This Gridfinity 4x3 cradle is designed to store a staple gun based on the widely used Bosch HT14 form factor. The tool rests securely in a custom-shaped horizontal pocket , providing a clean and organized storage solution within your…
1x4 Gridfinity element for the Testboy 113 probe pen. Designed to match the height of an ikea alex top drawer. The test probe is now stored horizontally so that it fits into an IKEA Alex top drawer.
I have a eurobox that I used for travel, bin which are 9u height fit perfectly inside. This is my solution to store my set of “small” spanners (6-7, 8-9, 10-11, and 12-13mm) Nothing special to print, mine is using standard quality (0.2mm)…
IMPORTANT Read the description carefully before print! Check the changelog at the bottom before printing, there might be updates to the model The original model and the parametric one are not stackable with each other! Prusa Mini version:…
Updated: Fix to top tray (if you're using it). There were some measurements off in the middle row. Should be good now. Please download the fix file: top-tray-with-4-holes-V3.stl. I know part of Zach's Gridfinity mission is "out in the…
Gridfinity Ultra Light Bin Generator Online Check out the Gridfinity Ultra-Light Bin System. With so much to print in the Gridfinity universe, this system helps you save time, filament and money, allowing you to print even more Gridfinity…
Zack Freedman’s original Gridfinity Base Plates https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Baseplates-60925 I’m a big fan of Gridfinity and magnets but the crazy filament cost to print the weighted baseplates to…
These are storage trays for different common batteries designed for the Gridfinity organization system by ZackFreedman These were all made using the Gridfinity Rebuilt project. I also increased the detail of the models beyond the default…
This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic baseplates using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so you…
This is my design for a case for holding Gridfinity bins. My design goals included: Clean design No Hardware Able to stand on ends and back Contents stay in place Easy to open and securely close Stackable Designed for 3D printing While I…
Zack Freedman's Gridfinity system features thick bases, scoops and label areas so make a system that is highly functional. These economical storage boxes trade-off functionality and aesthetics in an attempt to reduce print time, filament…
This 3D-printed desk organizer is designed to work with Gridfinity by Zack Freedman, and the module inspiration comes from my original desk organizer system . Each module in this project is 6U tall and fits perfectly on 2x4 Gridfinity…
Here are some plain bins for the Gridfinity storage system. I did not model these myself, but saved them from a few other places. I wanted to make sure they were available on this site as well. 8/18/24: Added 3x5x3 size. I will update…
Changelog 2023-09-25 - Label samples Bunch of 1 unit wide labels (M2, M2.5, M3, M4 Hex/Nylock/Square nut, socket head bolts) 2023-09-29 - Stacking lip and label shelf fix New F3D file (v1.2) uploaded - The label shelf is moved 0.6mm lower…
2 or 6 Part Gridfinity base inlay for Ikea Alex drawers with rims for better fit and less wiggle room. Drawer Dimensions 297mm x 525mm should be a nice fit. *Updated to be a bit shorter since for some people it was a bit too large Large…
this system is fully compatible with standard grifinity models. Based on ZackFreedman design it screws together using 4-40 socket head cap screws and heat set inserts, with an optional 1/8 dowel pin in the center if you want to be truly…
Gridfinity addicts, rejoice! Now you can bring your favorite organization system to the messiest place in your home: the Kitchen! In the collection, you will find various different models for various different sized utensils. The models…
Update May 2025: Fixed a bug in the parametric fusion 360 file. It seems that with a Fusion360 update a bug was introduced in the application, that lead to the boxes being broken when the height was changed. I repaired a few steps in the…
Gridfinity by Zack Freedman is an open source design specification for printable organizers to optimize shop workflow. I felt that the provided Fusion models, while able to make many bins, were limited. They are not completely parametric…
Update March 30, 2024 -- more sizes uploaded . On request, I've uploaded more pre-rendered 4x4 and 6x4 box model files. There are no changes to the source model or any of the existing model files. Enjoy! Description My Rugged Storage Box…
Gridfinity refined (at least in my humble opinion) … Gridfinity Specification Gridfinity is a set of guidelines and standards, created by Zack Freedman. The general guideline is that everything is a multiple of 7. Baseplate grids are made…
Plain gridfinity bins, these bins dont have the m3 holes for screws so the magnet holes print a lot better without support. the magnet holes are also designed to be a press fit for the magnets so no glue is needed. Magnets
This is a grid for Gridfinity where you can easily attach multiple grids together for those of us that have smaller print beds. The grid can be printed in PLA or PETG. I recommend .4mm nozzle and .2mm layer height. I put the perimeters up…
This is a recreation of Zack Freedman's gridfinity system in OpenSCAD, intended for both experienced OpenSCAD users to customize with added features, and also less-experienced OpenSCAD users to customize via options offered in the…
For my Gridfinity storage I needed bins without the lables and the rounded inside. So here are some in sizes from 1x1 to 3x3 In different heights. The name of the objects are the dimensions, for x and y and the height. According to Zack…
Open ended Gridfinity tools racks. 3x3 through 5x6 grid bases with divisions between 7mm - 39mm 56mm total height 2mm walls all around - Strong enough for a toolbox Div widths are rounded down, most are +.5mm of extra space. Material…
I really like the Gridfinity Case by Aiko since but the the model is extremely resource hungy - without any sacrifice in functionality or robustness I shaved down everything to yield about 33 % savings and added a list of other cool…
A Gridfinity bin adapted to print using vase mode. Slanted ribs are added to the side walls to increase the rigidity.
Gridfinity Ultra Light Bin Generator Online Check out the Gridfinity Ultra-Light Bin System. With so much to print in the Gridfinity universe, this system helps you save time, filament and money, allowing you to print even more Gridfinity…
This is a collection of tool holders for the Gridfinity system (42mm grid). All holders have the same height: 32 mm. The holders are designed to be put into a 7cm high drawer . Space saving was a priority : The tools are put into the…
Check out the new motorized version ! I made this carousel to organize the myriad of small parts and fasteners I've accumulated on my workbench. It can either be wall mounted via a French Cleat or set on a workbench. It's compatible with…
Gridfinity Ultra Light Bin Generator Online Check out the Gridfinity Ultra-Light Bin System. With so much to print in the Gridfinity universe, this system helps you save time, filament and money, allowing you to print even more Gridfinity…
This spool holder organizes your cables neat and tidy. It protects against unwanted unraveling, is modular and can be used with the gridfinity eco system. Great to use for outdoor repairs too, since one can carry them without the spool…
The box is parametric using gridfinity units. Added lids to ensure small parts are not mixed up in multi department boxes. Lids and Baseplate can be suppressed if needed. Parameters: Baseplate and Lids can be suppressed: Bodies to export:…
This Gridfinity battery dispenser fits 10 AA / 13 AAA batteries per 2x2x1 Gridfinity block, plus one dispensed battery. If you need to store more batteries, you can print another block that feeds batteries into the dispenser block…
A great deal of care must go into a design before there’s nothing left to optimize. I think we can all agree that Zack Friedman’s Gridfinity system has become a benchmark for organizational systems across sharing platforms. However, every…
Updates updated rails to be .5mm shorter for gridfinity and for tighter magnet fitting 24.6mm and 2.8mm deep. added V-style holder for ratchets and large extensions 8/17/2024 3-4 inch drive tool and socket holder and washers 2/18/2024…
Here is a very parametric and ✨ now Configured ✨ Gridfinity Base Grid and Bin Fusion 360 file with 3MF's. I'll keep adding and updating as we develop new items. See our collection . Now Standard 3MF Files – Rev 2 14 Oct 2023 All F3D and…
A box/holder for your SD cards! It holds up to 12 microSD cards and 3 full-size SD cards. It also has an integrated lid connected via a print-in-place linkage, which latches securely shut to ensure your SD cards won't fall out on the go.…
The Clickplate is a Gridfinity baseplate that doesn't utilize magnets. Instead, it secures bins with four small arms per square. The grip is quite strong, as the layer lines interlock with each other. Here is a Video of it in action. Here…
Unlock your storage potential with Gridfinity Bins! Make your own custom Bin with this Solid Base Model With a range of sizes and heights available, from 1x1 up to 5x5, in 9 different heights, you're sure to find the perfect bin for your…
More boxes for the Gridfinity storage system without the lables and the rounded inside. these are bigger sized boxes with dimensions from 4x1 to 5x5 in four different heights. The name of the objects are the dimensions, for x and y and…
Holds: 10 MicroSD Cards 6 Standard SD Cards 6 USB(A) Memory Sticks
Edit 8/3/2024: Added template without magnet holes. They are still in the sketch but they are not extruded. This easy to use template lets you make your own blank Gridfinity blocks. Sugested workflow: Open the template file. In the Modify…
I wanted a bin where the label was easy to read even from the front. So I made these. Apart from the fact that the design of the label lip prevents other units from being stacked on top of the bins, the dimensions of the bins are in…
There are many great models online for gridfinity socket organizers, but my toolbox is small, so I needed them to be as space-efficient as possible. This is my take on space-efficient socket organizers. I had to make some compromises on…
TLDR: Here are some drawers for the 5x4 Gridfinity Storage Box by Pred, and a custom box remix that compliments them. UPDATE: The Official Release of V1 of the Gridfinity Hardware Storage System is soon! I have been making a lot of…
These modules are based on Gridfinity by Zack Freedman . They are great for sorting small hardware like screws, bolts, nuts, etc., or your EDC. Each module in this project is 3U tall and fits perfectly on 2x4 Gridfinity frames . I printed…
jig for gluing the tiny magnets to gridfinity organizers, so that you can easily get the magnets in the right place with the right orientation, without getting superglue on your fingers. For the stationary magnets, I used some 8mm magnets…
Update on Jan 25, 2026: Partial Height Bins are now available for CR2 & CR123A batteries. AA and AAA bins have also been revised to have an additional compartment. High-capacity bins have also been added. Gridfinity Stackable Storage for…
Two modular storage systems combined! GEN2 Modular Storage System is a modular rail system for mounting storage units under Lack enclosures and tables. Gridfinity by Zack Fre edman is an incredibly customizable storage solution that uses…
A light version of my Gridfinity Hex Cups, with a hex pattern cut out of the walls and a smooth efficient base. all sizes - 999 models. The smooth efficient base reduces filament usage. For example; w2_d3_h6: uses 55g print time 3h3min…
Collection of Gridfinity basic cups height 6 (46mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
Instead of putting in batteries one-by-one, with this you can dump them in and take one as needed. Should also help you take the oldest battery first. It should let you hold AA, C, and AAA batteries (AAAs are shorter so they may rattle…
This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic undivided boxes using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so…
I wanted a compact Missile Turret style pencil holder that fit in a 2x2 Gridfinity space. I ended up creating this model in 3 pieces. Holds 12 pens/pencils. **Due to the advancements in accuracy of 3d printers I have found that the…
If you get value from my work, consider supporting me at stu142.com/supportme These Gridfinity baseplates are stacked and oriented so that you can print multiple at a time with no support. The baseplates easily break apart after printing.…
Gridfinity is the ultimate organizer for your whole workshop! Zack originally posted all the Gridfinity accessories at https://bit.ly/3E2NxnZ Parametric source files: Frame: https://a360.co/38FBsJz Weighted Plate: https://a360.co/3uCJ2gR…
Extension to the awesome Gridfinity project by Zack Freedman. This model allows you to mount a Gridfinity baseplate frame to your Ikea Skadis. If you have trouble with bed adhesion for the pegs, use a brim to keep them in place.…
The containers are designed to be used independently or with Gridfinity baseplates . The bottom has magnet holes for magnetized Gridfinity baseplates. The containers when fully loaded are stackable. The battery model number is printed on…
This Gridfinity compatible holder has four spaces in a 1x1 holder. The front two are 8 units high and the back two are 12 units high - perfect for a few pairs of tweezers and a feeler gauge - these tools are always right beside my…
Here are a set of files I made to bring Gridfinity to the new Harbor Freight US General Mini Toolboxes! There are 3 grid base files that will allow you to add your own gridfinity organization to your mini toolboxes you can also split the…
This set of boxes is designed specifically for storing cables. They have a lightweight design to use a minimum amount of plastic. The extended container's edge prevents cables from slipping out. These boxes are alterations of my original…
This is tray to hold my cheap Digital Calipers in my draw using Gridfinity. I bought these from Amazon in 2018 and it no longer seems to be available. But it might work for other models. This was created in onshape from a set of templates…
This is still a bit of a work in progress so im open to feedback, but these snap into the gridfinity plain bins I made. Used a brother p touch label printer to make some fancy labels, I put the templates for those in a zip file. Label…
The Gridfinity USB cable manager Small and simple solution to get rid of the USB cablemess in your drawer with Gridfinity! Printing: I printed the model on a ELEGOO Neptune 2s, with PLA filament, layer height 0.28 mm. First layer: 210°C/…
I wanted a gridfinity hex bit holder, there are a few available on Printables but none that quite had all of the features I wanted. I found the closest I could and remixed it to make it stackable. In gridfinty language this is 2x2 and 6…
I wanted to put all my Dremel accessories in the Dremel box, included in my new set, but the sponge inserts wasted soooo much space. So I decided to make it fit. First I tried to design a 4 piece design, but that would lack modularity, so…
Update from 2025.02.22: I added a slightly shorter version (6.5u instead of 7u) that is compatible with 220x220 beds This ruler is perfect for measuring stuff like drawers, pens, pliers, and more—all in Gridfinity units. It’s based on the…
Changelog: Changelog 30.07.24 New Gridformat added (3x1, 3x2, 3x3) with heights from 4U to 14U 26.07.24 Request fulfilled by @manofthesky_692784 : Magnetsocket added 18.07.24 STL files added as an alternative to 3mf format These…
This is a bit bigger than the original (see picture 2). I replaced the 3 small drawers with 2 additional big ones. They also got a 3*5 gridfinityframe inside - it will fit gridfinity bins up to 6u, for example. Used the flat covers by…
Gridfinity Extended OpenSCAD Model This is a recreation of Zack Freedman's gridfinity system in OpenSCAD. The Model attempts to accurately re-produce in OpenSCAD the Gridfinity bins as designed by Zack Freedman. It also adds extra…
CLICKbase , like the Clickfinity design it evolved from, is a latching Gridfinity baseplate that holds all Gridfinity compatible bins securely without using any magnets. The most significant difference with Clickfinity (and it's other…
