Counting matching models…
IMPORTANT Read the description carefully before print! Check the changelog at the bottom before printing, there might be updates to the model The original model and the parametric one are not stackable with each other! Prusa Mini version:…
This is my design for a case for holding Gridfinity bins. My design goals included: Clean design No Hardware Able to stand on ends and back Contents stay in place Easy to open and securely close Stackable Designed for 3D printing While I…
I wanted to put all my Dremel accessories in the Dremel box, included in my new set, but the sponge inserts wasted soooo much space. So I decided to make it fit. First I tried to design a 4 piece design, but that would lack modularity, so…
This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Screws labels with pictures of DIN912 screws
Based off Zack Freedman's pretty useful Gridfinity stoarge system. Original model I used can be found here: https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba More info on Gridfinity can be found here: I…
Box - Doesn't need supports but I've noticed the screw/magnet holes are not super clean. If this bothers you add some support material there. Lid - Print with the 'Blade" text side down. Should snap closed, might have to clean corners for…
Gridfinity screwdriver holder for Craftsman screwdriver set.…
Built an “all in one” for my Pinecil soldering iron, CNC Kitchen adaptors, and accessories. I used the Fusion 360 GridfinityGenerator plugin by Lev Mishin for the base model - great resource!…
Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Here is a Gridfinity baseplate designed to save filament and magnets. It still uses the default 6x2mm magnets in the same positions and is compatible with other gridfinity bins and models. There is an included STEP file so you can make it…
I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. This longer one works great for screws or hot glue sticks. There are optional magnet holes with…
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
Description This multi-part Gridfinity baseplate has been redesigned to perfectly fit the wide IKEA Alex drawers. The primary goal was to achieve a snug fit with minimal wiggle room while ensuring compatibility with a Prusa MK3+ sized…
About: I usually use CR2032 and small button batteries (such as LR44) only, and could not find anything small that would suit my needs. Can be used with 6x2mm round magnets used in gridfinity sets. Big hole diameters - the one on the top…
Stackable Gridfinity battery bins. A 1x1x5 bin that fits 9 batteries laying down, this bin is directly stackable. A 1x1x3 bin that fits 8 batteries standing up, in order to be stacked it requires a 1x1x3 spacer A 1x1x3 spacer. NOTE: The…
Exciting Update to Our Hex Bit Holder Design! In response to the community's feedback and my desire to enhance functionality, I've rolled out significant updates to our beloved hex bit holder. Here's what's new: Increased Capacity:…
Dovetail Gridfinity Base - Multiple Dovetail Options
This shelf mounts on top of the Ikea Skadis board and adds 209,5x12mm of storage space without loosing the use of the upper holes. This very strong shelf extends the use of your skadis board to a new level. Combine Ikea Skadis with the…
Stackable Gridfinity bins, one 1x2x5 for storing 10 * LR14250 batteries, one 1x1x2 for storing 16 LR41 and one 1x1x2 for storing 10 LR44. The base box is generated with the Fusion 360 GridfinityGenerator,…
Design: I started from the https://www.printables.com/model/190380-print-in-place-boxes designed by Vidar I sized the box using Fusion 360 parameters from the original model and design an insert for the drills bits. With thickness set to…
Gridfinity 5x4 Pen Holder, a sleek and efficient solution for organizing and displaying your collection of 18 pens. Contains magnet holes and can be stacked.
A Gridfinity tool holder for an iFixit Kit.
UPDATE: I created a new and improved version of this model that nests and allows for multi-stacking. It's better than this one in every way - I recommend using it instead. Link to updated version:…
// This is a reupload from makerworld of the remix by @penguinprints Gridfinity storage bin for 3.5 inch hard disk drives (HDDs), in 2x4x5 grid layout. This is a remix of a model by @thestevemarshall at…
A single Hex bin with 2x3 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
These bins have the perfect shape that nestle in the IKEA Maximera drawer's sloped wall. This version fits best if the Gridfinity baseplate is up against the curved part of the drawer. These drawers are used in the METHOD and SEKTION…
I've been meaning to design a tape holder as part of my quest to Gridfinitize my makerspace. So I came up with this simple and compact yet effective design. Its only 1 part, includes a tool for cutting tape, and you can easily hot swap…
You've already invested in a Gridfinity organization system and need to store thread or bobbins. This is the solution for you! I have included models for staking 1 - 3 spools on top of each other as well as a model that will fit 4 smaller…
The CannaCaddy Compact - A 2x2 gridfinity module designed specifically to hold your smoking tools. I originally just wanted something to hold the bowl head while I packed it, and the idea evolved into holding lighters and carts and…
Gridfinity storage for a Dymo LetraTag 200B Bluetooth Label printer. Size: 3x3x2.
A gridfinity charger for your Sonicare Toothbrush.
As always thank you Zack Freedman for your generous gift of Gridfinity to shops everywhere, you are the man. This is my contribution to the Gridfinity ecosystem. Now you can add your Pica 150/46/SB markers to your storage system. Printing…
Swatch sized to a Gridfinity bin to keep track of various types of infill. Same size as my Filament Colour Swatches . Brother DK-11204 Multi Purpose Label template included in the files. Print Settings in the swatches shown: Vertical…
Gridfinity compatible storage for Starbond 2oz. Cyanoacrylate glues and Bob Smith Industries 2 oz. cyanoacrylate accellerator. There is some bridging on the base where the weight cavities are located. This was no issue on my Ender 3 Pro.…
Design description Remixed the N147 Caliper holder as the design looked close enough to mine, but I had one of the 3 buttons on top of the display. Also included a slot for a spare battery, just because the block had room to spare. Link…
Included STEP file for making it larger or adjusting the magnet holes. Uses 6x2mm magnets (same as other gridfinity) and is compatible with all gridfinity models. I've Used this on my ender 3 pro and also v2.
Mitutoyo dial indicator Gridfinity tray Size 1x2.5x4
It is gridfinity . Based on my Fusion parametric gridfinity model so it comes with nice magnet holes, corner bases have them covered with 0,2mm to prevent edge lifting, 0,5mm clearance so it sits nice. 7 slots for chalk, just wide enough…
This has slots for 2x6 magnets in each of the four corners. Just add a “Pause Print" at the appropriate spot, and place them in!
Holds 12 spools of thread that are 33mm diamater. Will be designing more sewing and crafting related Gridfinity bins. Organizing the sewing nook in our house with a combination of Gridfinity and Multiboard. Holes are 33.5mm to easily hold…
Today I designed a whole collection of Gridfinity bins tailored specifically for the drawer beneath my monitor. Each bin has a different purpose, turning the drawer into a clean, organized workspace: Pen Grabber Bin — holds 6 pens with…
This Gridfinity-compatible tray is specially designed for the WMF Palermo cutlery set, accommodating neatly 12 pieces each of forks, knives, spoons, and teaspoons. Optimized to fit a standard 60-piece set precisely, this modular organizer…
Box für 7 Holzbohrer von 3mm - 6mm im Gridfinity Design
A quick remix of the Gridfinity baseplate so it can easily be mounted on my Ikea Lack enclosure. I added some additional additional support around the mount; however, it can be improved. Printing Instructions After importing the model,…
Vertical holder for Dymo LabelManager 160, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:
Design Requirements A simple gridfinity container that holds reusable grocery bags Printing Setup Printed with PETG using a .4 mm nozzle and no supports First Impressions The bags fit Attribution ZackFreedman - Gridfinity gdie - Freecad…
Bin Dimensions: X: 1 Unit Y: 2 Units Z: 3 Units Print Settings: Layer Height: 0.2mm Top Layers: 4 Bottom Layers: 2 Enabled Ironing to make the font easy to read. Note: Version in picture is only 2 units tall. I increased it to 3 units as…
Printed in PLA, didn't use supports.
Gridfinity Toshiba remote holder. Eventually I will have a spot for every piece of junk on my desk :P
A Gridfinity box (size 2x3x4) for storing the original Prusa Accelerometer , designed for the Prusa CORE ONE 3D printers. The case is printed in two parts, the Gridfinity box and a cable holder snap-on to keep the accelerometer cable in…
This is a bin designed specifically to hold the 7.2v Makita DF012D power screwdriver for Zach Freedman's Gridfinity system. It may also fit the impact version (TD022D), but I don't have one available to verify. If you are unfamiliar with…
Gridfinity bin for longer stuff for scissor shaped things like forceps, that can be helpful in a garage
This cradle holds the Ferrex M7 multitool, a small dremel clone sold by ALDI in Germany. You can extract it from it's holder by either grabbing the tool from the middle, or, if that is easier for you, by pushing down on the spindle in…
This is a custom-designed lightweight Gridfinity baseplate optimized for the IKEA NORDEN table drawer. The set includes two baseplates per drawer, each featuring a 3x4 Gridfinity layout. These baseplates were built using the Autodesk…
I mashed up these two models in Tinkercad to mount Flic buttons in gridfinity grids.
This Gridfinity tray is for this 13-Piece NEIKO 10074A Metric Hex Bit Socket Set .
As the titel states, a Gridfinity tool holder for very small wrenches. Wie der Titel schon sagt, ein Gridfinity Halter für sehr kleine Schraubenschlüssel.
This Gridfinity-compatible organizer is designed to neatly store heat thread inserts and soldering accessories in one compact module. It fits heat thread inserts in the following sizes: M2, M2.5, M3, M4, M5, M6, and M8 , each with its own…
This cradle lets you organize your Vanmoof S3 toolkit, in the gridfinity universe.
Gridfinity Storage Box A compact, modular Gridfinity storage solution designed to keep your batteries, screws, and components organized. Features a snap-fit latch mechanism to keep the lid locked, making it easy and secure to carry…
Gridfinity Holder tailored for Tonic Studios Tim Holtz Non-Stick Micro Serrated Mini Snips. This holder provides a snug home for your essential crafting tool. Contains magnet holes on the bottom and can be stacked.
1x4x3 Gridfinity bin to hold two balisong trainers. Made to fit trainers from Squid Industries. Specifically includes a cutout on one half to fit the Squiddy which has screws that stick out from the body.
I designed this Gridfinity bin to organize my small woodworking shop. This 1x3 Gridfinity bin holds the Hongdui JF06 Kerfmaker. The bin has no stacking lip but holes for magnets on the bottom. Model was created using Fusion360 and the…
A minimalistic 9x3 Gridfinity ( https://gridfinity.xyz/ ) fixture that holds the Carvera Air 4th axis module. The fixture consists of 4 corner pieces that each have a cutout for you to easily label. The corner pieces are in total 12mm…
Vollflächige Gridfinity-Base für Eurobox 600×400. Passgenauer Randabstand. Einlegen, fertig. Format: Eurobox 600×400 , auf typische Innenmaße (~ 555×355 mm ) ausgelegt. Raster: 13×8 Zellen → 546×336 mm Nutzfläche. Use-Case: Für Nutzer mit…
I'm a huge fan of the Gridfinity organization system, and I also have a butane blow torch that I use for burning and melting the strings off of my prints, and there wasn't a convenient holder already available for it and it's flared…
base was made in half-size (21mm) grid as my other router trays are also 9 half-tiles long and it seemed to be a good size. It fits on a normal 42mm grid. If you want to design something yourself the plane should fit on a 4x4 42mm grid;…
I've gotten these classic drawer organizers second hand. They're were made by Arko Mils and there's a decent amount of them in the resale market. They're nice, semi-portable parts holders but they've proven to be slightly a bit too big…
Gridfinity bin for Fortum Riveting Pliers
I want to start off by saying I do not know fusion360 (yet) but i really needed this piece to finish my workspace gridfinity setup. I used the linked remix file below to make this holder with a 5 degree tilt up and a cut out for the power…
This is my first model, a gridfinity compatible storage tray for a Veritas block plane. They have a couple of sizes so check the photo's to see if yours is the same type. I kept the profile low in order to be able to easily pick it up…
When toying around with Voron 3D Printers you usually endup having one or two spare extruders laying around in your tool drawer. This little gridfinity-bin holds your Voron Clockwork extruder firmly in place, always ready when you need…
A stackable container for Ikea Braunit batteries in the style of Definitive Collection of Battery Holders (Gridfinity, Stackable & Labelled) by xavierly It holds two batteries in a 1x2 Gridfinity container. The base OpenSCAD model is…
A Gridfinity Box with the dimensions of 2x3x3 for cards(for example dry erase cards). The box doesn't have slots magnets. Feel free to remix the model. I generated the other bins on the picture on the Gridfinity generator website.
Gridfinity compatible organizer holder for the Titan 11335 micro 1/4 ratchet and bit driver set. Three walls, three top and bottom layers, and 15% gyroid infill is good enough for this model. Organizer in the photos printed with Creator…
Holds your Insta360 X3 plus up to two batteries (one inside the device and one in the separate holder. There is also a holder for that 360 degrees "yoyo". Used Filament: Geeetech PLA, orange, https://amzn.to/4rcruSJ Happy organising! :)
A gridfinity bin with the size of 1x6 and a bin hight of 6cm. The bar structure makes it durable and a bit less material consuming. Hope you like it. The base is created with the gridfinity fusion 360 plugin from…
Simple Gridfinity Bin to hold ArmyPainter Speedpaint Bottles. 25mm Diameter and 77mm height. Might also fit Vallejo Colors. Don't mind the mediocre print quality on the Picture. I used cheapest and wet PLA to testprint at 0.6mm Nozzle.…
Updated: Fix to top tray (if you're using it). There were some measurements off in the middle row. Should be good now. Please download the fix file: top-tray-with-4-holes-V3.stl. I know part of Zach's Gridfinity mission is "out in the…
Gridfinity Ultra Light Bin Generator Online Check out the Gridfinity Ultra-Light Bin System. With so much to print in the Gridfinity universe, this system helps you save time, filament and money, allowing you to print even more Gridfinity…
Zack Freedman’s original Gridfinity Base Plates https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%2520Baseplates-60925 I’m a big fan of Gridfinity and magnets but the crazy filament cost to print the weighted baseplates to…
These are storage trays for different common batteries designed for the Gridfinity organization system by ZackFreedman These were all made using the Gridfinity Rebuilt project. I also increased the detail of the models beyond the default…
This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic baseplates using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so you…
Zack Freedman's Gridfinity system features thick bases, scoops and label areas so make a system that is highly functional. These economical storage boxes trade-off functionality and aesthetics in an attempt to reduce print time, filament…
This 3D-printed desk organizer is designed to work with Gridfinity by Zack Freedman, and the module inspiration comes from my original desk organizer system . Each module in this project is 6U tall and fits perfectly on 2x4 Gridfinity…
Here are some plain bins for the Gridfinity storage system. I did not model these myself, but saved them from a few other places. I wanted to make sure they were available on this site as well. 8/18/24: Added 3x5x3 size. I will update…
This amazing automatic M3 bolt sorter is designed for the specific bolts you can see in the picture. I don't know how it works with other M3 bolts, but feel free to try. :) Be aware that if you use m3Sorter_bottom_gridfinity.stl you also…
Changelog 2023-09-25 - Label samples Bunch of 1 unit wide labels (M2, M2.5, M3, M4 Hex/Nylock/Square nut, socket head bolts) 2023-09-29 - Stacking lip and label shelf fix New F3D file (v1.2) uploaded - The label shelf is moved 0.6mm lower…
2 or 6 Part Gridfinity base inlay for Ikea Alex drawers with rims for better fit and less wiggle room. Drawer Dimensions 297mm x 525mm should be a nice fit. *Updated to be a bit shorter since for some people it was a bit too large Large…
this system is fully compatible with standard grifinity models. Based on ZackFreedman design it screws together using 4-40 socket head cap screws and heat set inserts, with an optional 1/8 dowel pin in the center if you want to be truly…
Gridfinity addicts, rejoice! Now you can bring your favorite organization system to the messiest place in your home: the Kitchen! In the collection, you will find various different models for various different sized utensils. The models…
Update May 2025: Fixed a bug in the parametric fusion 360 file. It seems that with a Fusion360 update a bug was introduced in the application, that lead to the boxes being broken when the height was changed. I repaired a few steps in the…
Gridfinity by Zack Freedman is an open source design specification for printable organizers to optimize shop workflow. I felt that the provided Fusion models, while able to make many bins, were limited. They are not completely parametric…
Update March 30, 2024 -- more sizes uploaded . On request, I've uploaded more pre-rendered 4x4 and 6x4 box model files. There are no changes to the source model or any of the existing model files. Enjoy! Description My Rugged Storage Box…
Gridfinity refined (at least in my humble opinion) … Gridfinity Specification Gridfinity is a set of guidelines and standards, created by Zack Freedman. The general guideline is that everything is a multiple of 7. Baseplate grids are made…
Plain gridfinity bins, these bins dont have the m3 holes for screws so the magnet holes print a lot better without support. the magnet holes are also designed to be a press fit for the magnets so no glue is needed. Magnets
This is a grid for Gridfinity where you can easily attach multiple grids together for those of us that have smaller print beds. The grid can be printed in PLA or PETG. I recommend .4mm nozzle and .2mm layer height. I put the perimeters up…
This is a recreation of Zack Freedman's gridfinity system in OpenSCAD, intended for both experienced OpenSCAD users to customize with added features, and also less-experienced OpenSCAD users to customize via options offered in the…
